SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Mouse cage system provides versatility and ease in handling laboratory mice, cleaning their cages, and collecting uncontaminated metabolic test specimens. The cage, compact and free standing, contains a screened bottom and funnel channel to collect waste. The feed is in the cage top and thereby separates the food and waste.
Photon absorptiometry was used to evaluate bone mineral kinetics associated with normal development and the possible perturbations to bone development resulting from hypergravity exposure over a period of six months in developing Beagles. A series of seven measurements were performed at specific times with the first measurement prior to treatment and subsequent measurements at 2, 5, 9, 14, 20 and 26 weeks from the onset of the experiment. Four groups of six male Beagle pups, ranging in age from 85 to 92 days were studied. Two groups were chronically exposed to hypergravity treatments by centrifugation of 2.0 G (18.0 RPM, 11.7 ft radius) and 2.6 G (18.0 RPM, 19.8 ft radius) for the 26 week period. A third group of six dogs served as a caged control to evaluate possible changes due to confinement in small plexiglass cages similar to those of the centrifuge. Thus this control group was subjected to limited exercise due to caging restraint. The fourth group of animals was housed in open runs to allow exercise without the spatial confinement of the smaller plexiglass cages. Results show highly significant differences in body weight, bone length, increase in bone density of control group relative to other groups, and a decrease in bone mineral content in the two gravity treated groups.
Parametric tests were conducted with a 35 mm bore angular contact ball bearing with a double outer land guided cage. Provisions were made for jet lubrication and outer-ring cooling of the bearing. Test conditions included a combined thrust and radial load at nominal shaft speeds of 48,000 rpm, and an oil-in temperature of 394 K (250 F). Successful operation of the test bearing was accomplished up to 2.5 million DN. Test results were compared with those obtained with similar bearing having a single outer land guided cage. Higher temperatures were generated with the double outer land guided cage bearing, and bearing power loss and cage slip were greater. Cooling the outer ring resulted in a decrease in overall bearing operating temperature.
The centrifuge comprises a generally circular, rotatably mounted frame carrying a plurality of removable and replaceable cages for the animal specimens. Pairs of opposing cages may be removed from the frame while it is rotating by means of a cage exchanger which rotates concentrically within the centrifuge and the speed of which is controlled independently of the frame speed. An image rotator is provided for selective observation of the rotating animals. The system further includes a waste conveyor system, a food supply system, and a water supply system for each cage for creating a life sustaining environment so that the animals can live in the rotating centrifuge for extended periods.
Male Sprague Dawley rats were housed in groups of four in polycarbonate cages at recommended density and thermal environmental conditions for 14 days prior to testing to ensure uniform acclimation to those conditions. Body weights averaged 286 +/- 7 g at the end of acclimation. Rat cages were assigned randomly to three treatments: (1) 4 rats/polycarbonate cage (877 sq cm, 20.3 cm high, 220 sq cm/rat), (2) 4 rats/mock AEM (MAEM) (620 sq cm, 155 sq cm/rat), and (3) 8 rats/MAEM (620 sq cm, 77.5 sq cm/rat). A comparison between the MAEM-DD and MAEM-SD treatments was done to determine if doubling rat density in AEM's stressed the rats. A comparison among MAEM treatments and the PC treatment was done to determine if any stress indications were due to the AEM. During this density challenge phase, all treatments were maintained at the same thermal environmental conditions (22.5 C and 50 percent RH) for 10 days. After the density challenge phase, half the rats from each group were sacrificed for body tissue and fluid analyses. The remaining half of the rats were housed at a density of 4 rats/cage in polycarbonate cages at normal thermal environmental conditions for an additional 10 days to determine if there were any differences in responses between treatments after a recovery period. The remaining rats were examined and sacrificed for body tissue and fluid analyses at the end of the recovery phase.
This final report encapsulates the accomplishments of the third year of work on an Advanced Biotelemetry System (ABTS). Overall MU/ABTS project objectives are to provide a biotelemetry system that can collect data from and send commands to an implanted biotransceiver. This system will provide for studies of rodent development in space. The system must be capable of operating in a metal animal cage environment. An important goal is the development of a small, "smart", micropower, implantable biotransceiver with eight-channel data output and single channel command input capabilities with the flexibility for easy customization for a variety of physiologic investigations. The NASA Ames/Marquette University Joint Research work has been devoted to the system design of such a new state of the art biotelemetry system, having multiple physiologic inputs, and bi-directional data transfer capabilities. This work has provided a successful prototype system that connects, by two-way radio links, an addressable biotelemetry system that provides communication between an animal biotelemeter prototype and a personal computer. The operational features of the prototype system are: (1) two-way PCM communication with implanted biotelemeter; (2) microcontroller based biotelemeter; (3) out-link: wideband FSK (60 kBaud); (4) in-link: OOK (2.4 kbaud); (5) septum antenna arrays (In/Out-Links); and (6) personal computer data interface. The important requirement of this third year's work, to demonstrate two-way communication with transmit and receive antennas inside the metal animal cage, has been successfully accomplished. The advances discussed in this report demonstrate that the AAH cage antenna system can provide Out-link and In-link capability for the ABTS bi-directional telemetry system, and can serve as a benchmark for project status. Additions and enhancements to the most recent (April 1997) prototype cage and antenna have been implemented. The implementation, testing, and documentation was accomplished at the Biotelemetry Laboratory at Marquette University with Out-Link (slot) antenna design assistance was provided.
Astronauts experience many physiological changes during spaceflight and exposure to microgravity. There is a headwardshift of fluids, muscles atrophy, and changes occur in the body's bone structure and hormone levels. This paper describes a unique metabolic cage that was developed to evaluate ground simulation of these effects. Hindlimb or tail suspension in rats has been studied as a model to create the effects of microgravity in order to study how to counteract them. This suspension model, developed by Holton, accurately simulates the effects of weightlessness during spaceflight by unloading the hindlimbs and producing a head-ward shift of fluids. However, obtaining quantitative data on the nutritional state, the gastrointestinal and renal function of these animals has not been possible, until now. Using Holton's tail suspension model, the new metabolic suspension cage effectively separates urine and feces samples for analysis allowing investigators to examine the effects of microgravity in many complex body systems. A description of the cage system, its design, and results of its use is provided along with pictures and details for replication of the cages.
Type II porous liquids can potentially exploit the fluidity of liquids and sorption properties of porous sorbents, yet CO 2 uptake in porous liquids is still poorly understood. Molecular simulations and experiments are used to examine CO 2 uptake by a prototypical porous liquid composed of porous organic cages (CC13) in 2′-hydroxyacetophenone (2′-HAP). The simulations are in reasonable agreement with experimental measurements of CO 2 solubility and provide unambiguous information on the partitioning of CO 2 within microenvironments in the liquid. Analysis of CO 2 dynamics is performed using these simulations, including assessing the self-diffusivity of CO 2 in both the neat solvent and porous liquid. This offers insights into the kinetics of CO 2 uptake and transport in type II porous liquids based on imine cages. Experiments with type II porous liquids formed by dissolving CC13 in three different size-excluded solvents show nonadditive CO 2 absorption relative to predictions based on ideal volume additivity. This nonadditive absorption behavior is also observed in simulations. Nonadditive CO 2 uptake is also demonstrated in type II porous liquids based on another imine-based porous cage, CC19.
The absence of translational symmetry in glassy materials poses a significant challenge in establishing effective structure-property relationships in real space. Consequently, the potential energy landscape (PEL) in phase space is widely utilized to comprehend the complex phenomena in glasses. The classical PEL features a two-scale profile comprising mega-basins and sub-basins, corresponding to α-relaxations (e.g. glass transition) and β-relaxations (e.g. local cage-breaking atomic rearrangements), respectively. Recent studies, however, reveal that sub-basins are not smooth and contain finer structures, the origins of which remain elusive. Here we probe the smoothness of sub-basin bottoms in glasses' PEL by introducing small intra-cage cyclic loading and then measuring the net changes in atomic-level stresses. Compared to glasses with pair interaction, glasses with many-body interaction exhibit orders-of-magnitude larger and loading-dependent stress changes even before the first cage-breaking event takes place, which reflect much more feature-rich sub-basins. We further demonstrate this stark contrast stems from the spatial distribution of individual atom's constraining force field. Specifically, at vanishing perturbations, many-body interactions disrupt the positive-definite synchrony in energy variations of the perturbed atom and the whole system, causing inherently less confined atomic responses and infinitely rugged sub-basins. The implications of these findings for the selective addition or removal of fine structures in the PEL and the subsequent tuning of glassy materials' responses to external stimuli are also explored.
Abstract Despite extensive studies on mesoporous silica since the early 1990s, the synthesis of two‐dimensional (2D) silica nanostructures remains challenging. Here, mesoporous silica is synthesized at an interface between two immiscible solvents under conditions leading to the formation of 2D superstructures of silica cages, the thinnest mesoporous silica films synthesized to date. Orientational correlations between cage units increase with increasing layer number controlled via pH, while swelling with oil and mixed surfactants increase micelle size dispersity, leading to complex clathrate type structures in multilayer superstructures. The results suggest that a three‐dimensional (3D) crystallographic registry within cage‐like superstructures emerges as a result of the concerted 3D co‐assembly of the organic and inorganic components. Mesoporous 2D superstructures can be fabricated over macroscopic film dimensions and stacked on top of each other. The realization of previously inaccessible mesoporous silica heterostructures with separation or catalytic properties unachievable via conventional bulk syntheses is envisioned.
A modified cage plasma nitriding technique is used to coat a Ni film onto a 316L substrate as a protective layer for austenitic steels in molten fluoride salts. The coating is achieved by deposition of Ni atoms sputtered from a Ni cage with a 316L substrate floated at the same potential as the cage to reduce plasma sputtering on the substrate. The Ni coating is porosity-free and precipitation-free and forms a γ-(Fe, Ni) phase due to interdiffusion from the substrate. Beneath the interdiffusion layer exists a thick γ-phase layer mainly affected by long-range nitrogen diffusion along the grain boundary. This layer develops grain boundary Cr nitride precipitates. Ion irradiation on the polished cross-section of the plasma-treated sample shows no void swelling in the surface-deposited Ni layer, very limited void formation in N diffusion layer, and significant void swelling in bulk unaffected by nitrogen. The studies demonstrate the feasibility of the technique for Ni coating and show good swelling resistance of the coating layer and N diffusion-affected layer. Mechanisms are discussed in this paper.
This study investigates the photochemical properties and stability of zirconium-based porous salts composed of coordination cages and redox-active polyoxometalates (POMs). While bulk porous salts demonstrated photoreduction confined to surface regions due to lim-ited light penetration and scattering effects, thin films of cage-POM assemblies were fabricated to address these challenges. These optically transparent films allowed access to the catalyst core, enabling enhanced photochemical characterization. Comparative studies revealed that the thin films exhibited superior photochemical activity and maintained porosity under optimized conditions, whereas bulk powders suffered from surface-limited photoreduction and cage decomposition. Furthermore, this work highlights the utility of thin films as a platform for studying and advancing the photochemical applications of porous salts.
UV photofragment spectroscopy and IR–UV double resonance methods are used to determine the structure and spectroscopic responses of a three-dimensional [2.2.2]-benzocryptand cage to the incorporation of a single K + or Ba 2+ imbedded inside it (labeled as K + -BzCrypt, Ba 2+ -BzCrypt). We studied the isolated ion-cryptand complex under cryo-cooled conditions, brought into the gas phase by nano-electrospray ionization. Incorporation of a phenyl ring in place of the central ethyl group in one of the three N-CH 2 -CH 2 -O-CH 2 -CH 2 -O-CH 2 -CH 2 -N chains provides a UV chromophore whose S 0 –S 1 transition we probe. K + -BzCrypt and Ba 2+ -BzCrypt have their S 0 –S 1 origin transitions at 35,925 and 36,446 cm –1 , respectively, blue-shifted by 174 and 695 cm –1 from that of 1,2-dimethoxybenzene. These origins are used to excite a single conformation of each complex selectively and record their IR spectra using IR–UV dip spectroscopy. The alkyl CH stretch region (2800–3000 cm –1 ) is surprisingly sensitive to the presence and nature of the encapsulated ion. We carried out an exhaustive conformational search of cage conformations for K + -BzCrypt and Ba 2+ -BzCrypt, identifying two conformations (A and B) that lie below all others in energy. Here, we extend our local mode anharmonic model of the CH stretch region to these strongly bound ion-cage complexes to predict conformation-specific alkyl CH stretch spectra, obtaining quantitative agreement with experiment for conformer A, the gas-phase global minimum. The large electrostatic effect of the charge on the O- and N-lone pairs affects the local mode frequencies of the CH 2 groups adjacent to these atoms. The localized CH 2 scissors modes are pushed up in frequency by the adjacent O/N-atoms so that their overtones have little effect on the alkyl CH stretch region. However, the localized CH 2 wags are nearly degenerate and strongly coupled to one another, producing an array of delocalized wag normal modes, whose highest frequency members reach up above 1400 cm –1 . As such, their overtones mix significantly with the CH stretch modes, most notably involving the CH 2 symmetric stretch fundamentals of the central ethyl groups in the all-alkyl chains and the CH stretches adjacent to the N-atoms and antiperiplanar to the nitrogen lone pair.
The fabrication of complex assemblies with interesting collective properties from plasmonic nanoparticles (NPs) is often challenging. While DNA-directed self-assembly has emerged as one of the most promising approaches to forming such complex assemblies, the resulting structures tend to have large variability in gap sizes and shapes, as the DNA strands used to organize these particles are flexible, and the polydispersity of the NPs leads to variability in these critical structural features. Here, we use a new strategy termed docking to DNA origami cages (D-DOC) to organize spherical NPs into a linear heterotrimer with a precisely defined geometrical arrangement. Instead of binding NPs to the exterior of the DNA templates, D-DOC binds the NPs to either the interior or the opening of a 3D cage, which significantly reduces the variability of critical structural features by incorporating multiple diametrically arranged capture strands to tether NPs. Additionally, such a spatial arrangement of the capture strand can work synergistically with shape complementarity to achieve tighter confinement. To assemble NPs via D-DOC, we developed a multistep assembly process that first encapsulates an NP inside a cage and then binds two other NPs to the openings. Microscopic characterization shows low variability in the bond angles and gap sizes. Both UV–vis absorption and surface-enhanced Raman scattering (SERS) measurements showed strong plasmonic coupling that aligned with predictions by electrodynamic simulations, further confirming the precision of the assembly. These results suggest D-DOC could open new opportunities in biomolecular sensing, SERS and fluorescence spectroscopies, and energy harvesting through the self-assembly of NPs into more complex 3D assemblies.
The results of quantum chemical and molecular dynamics calculations reveal that polyanionic gallium-based cages accelerate cyclization reactions of pentadienyl alcohols as a result of substrate cage interactions, preferential binding of reactive conformations of substrate/H 3 O + pairs, and increased substrate basicity. However, the increase in basicity dominates. Here, experimental structure–activity relationship studies in which the metal vertices and overall charge of the cage are varied confirm the model derived via calculations.
Two-dimensional (2D) tin halide perovskites are highly tunable and low-toxicity semiconductors, promising for next-generation optoelectronics. However, achieving air stability and excellent photophysical properties simultaneously necessitates deliberate structure tuning using organic spacer cations and A-site cations. Here, we report a series of new quasi-2D Ruddlesden–Popper tin halide perovskites using a fluorinated aromatic spacer cation, 4-fluorophenethylammonium (4FPEA), and systematically investigate the impacts of layer thickness, spacer cation, and A-site cation on the crystal structures and optical properties of (4FPEA) 2 (A) n−1 S n I 3n+1 . These 4FPEA-based 2D tin perovskites, further tuned by the A-cations, exhibit uniquely undistorted 180° out-of-plane Sn–I–Sn bond angles and low octahedral distortions compared to other quasi-2D perovskites and demonstrate prolonged air stability, excellent photophysics, and amplified spontaneous emission and lasing in exfoliated microflakes. A comprehensive survey of reported n = 2 lead and tin iodide perovskites reveals that all structures can be classified into three types (tilted, balanced, and buckled) based on the structural distortion parameters of their perovskite cages. Notably, (4FPEA) 2 (A)Sn 2 I 7 are among the handful of “balanced” n = 2 perovskites with minimal distortion and excellent optoelectronic performance. Furthermore, the structural insights and cage-balancing approach revealed herein motivate the deliberate design of quasi-2D perovskites through the synergy of the spacer and cage cations, further paving the way for high-performance optoelectronic applications of stable tin halide perovskites.
Coiled-coil protein origami (CCPO) is a modular strategy for the de novo design of polypeptide nanostructures. CCPO folds are defined by the sequential order of concatenated orthogonal coiled-coil (CC) dimer-forming peptides, where a single-chain protein is programmed to fold into a polyhedral cage. Self-assembly of CC-based nanostructures from several chains, similarly as in DNA nanotechnology, could facilitate the design of more complex assemblies and the introduction of functionalities. Here, we show the design of a de novo triangular bipyramid fold comprising 18 CC-forming segments and define the strategy for the two-chain self-assembly of the bipyramidal cage from asymmetric and pseudo-symmetric pre-organised structural modules. In addition, by introducing a protease cleavage site and masking the interfacial CC-forming segments in the two-chain bipyramidal cage, we devise a proteolysis-mediated conformational switch. This strategy could be extended to other modular protein folds, facilitating the construction of dynamic multi-chain CC-based complexes.
Actinide diatomic molecules are ideal models to study elusive actinide multiple bonds, but most of these diatomic molecules have so far only been studied in solid inert gas matrices. Herein, we report a charged U≡N diatomic species captured in fullerene cages and stabilized by the U-fullerene coordination interaction. Two diatomic clusterfullerenes, viz. UN@C s (6)-C 82 and UN@C 2 (5)-C 82 , were successfully synthesized and characterized. Crystallographic analysis reveals U-N bond lengths of 1.760(7) and 1.760(20) Å in UN@C s (6)-C 82 and UN@C 2 (5)-C 82 . Moreover, U≡N was found to be immobilized and coordinated to the fullerene cages at 100 K but it rotates inside the cage at 273 K. Quantum-chemical calculations show a (UN) 2+ @(C 82 ) 2- electronic structure with formal +5 oxidation state (f 1 ) of U and unambiguously demonstrate the presence of a U≡N bond in the clusterfullerenes. This study constitutes an approach to stabilize fundamentally important actinide multiply bonded species.