SEARCH · Engineering Papers

Results for “CUTTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2018

The steady growth of the high-energy spectral cut-off in relativistic magnetic reconnection

Magnetic reconnection is invoked as an efficient particle accelerator in a variety of astrophysical sources of non-thermal high-energy radiation. With large-scale two-dimensional particle-in-cell simulations of relativistic reconnection (i.e. with magnetization σ >> 1) in pair plasmas, we study the long-term evolution of the power-law slope and high-energy cut-off of the spectrum of accelerated particles. We find that the high-energy spectral cut-off does not saturate at γcut ~ 4σ, as claimed by earlier studies, but it steadily grows with time as long as the reconnection process stays active. At late times, the cut-off scales approximately as γ cut ∝√t, regardless of the flow magnetization and initial temperature. We show that the particles dominating the high-energy spectral cut-off reside in plasmoids, and in particular in a strongly magnetized ring around the plasmoid core. The growth of their energy is driven by the increase in the local field strength, coupled with the conservation of the first adiabatic invariant. We also find that the power-law slope of the spectrum (p = -d log N/d log γ) evolves with time. For σ ≳ 10, the spectrum is hard at early times (p ≲ 2), but it tends to asymptote to p ~ 2; the steepening of the power-law slope allows the spectral cut-off to extend to higher and higher energies, without violating the fixed energy budget of the system. Our results demonstrate that relativistic reconnection is a viable candidate for accelerating the high-energy particles emitting in relativistic astrophysical sources.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

The Effects of Plasma Pre-Cracking on Drilling of Hard Rocks: A Single Insert Cutting Experiment

Abstract This paper studies the effects of plasma-induced cracks on rock cutting to support the concept of a plasma-integrated drag bit for accelerated geothermal drilling through hard rocks. For this, a single polycrystalline diamond compact (PDC) drilling technique is used in cutting granite to compare thrust and cutting forces between plasma-treated and untreated rock samples. The cracks are produced using underwater plasma at 80 J per pulse. This energy level does not produce visible damage to the rock. The cutting tests are conducted at a cutting speed of 12.7 m/min and four feed rates of 0.127, 0.201, 0.267, and 0.414 mm/s to represent actual drilling scenarios. The results show a general trend of reduction in both thrust and cutting forces for these feed rates, but the magnitude of reduction highly depends on the feed rate. The maximum force reduction of around 50% is found at the 0.267 mm/s feed rate with statistical significance. Cases with a higher force reduction are also found to have rougher surface topography, which indicates more excessive fracturing and, thus, a cracks-accelerated material removal process. This study provides initial evidence of using underwater plasma to increase the downhole drilling rate of hard rocks.

Engineering↗

DOE OSTI2021

Orbital Conflict: Cutting Planes for Symmetric Integer Programs

Cutting planes have been an important factor in the impressive progress made by integer programming (IP) solvers in the past two decades. However, cutting planes have had little impact on improving performance for symmetric IPs. Rather, the main breakthroughs for solving symmetric IPs have been achieved by cleverly exploiting symmetry in the enumeration phase of branch and bound. In this work, we introduce a hierarchy of cutting planes that arise from a reinterpretation of symmetry-exploiting branching methods. There are too many inequalities in the hierarchy to be used efficiently in a direct manner. However, the lowest levels of this cutting-plane hierarchy can be implicitly exploited by enhancing the conflict graph of the integer programming instance and by generating inequalities such as clique cuts valid for the stable set relaxation of the instance. We provide computational evidence that the resulting symmetry-powered clique cuts can improve state-of-the-art symmetry-exploiting methods. Furthermore, the inequalities are then employed in a two-phase approach with high-throughput computations to solve heretofore unsolved symmetric integer programs arising from covering designs, establishing for the first time the covering radii of two binary-ternary codes.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1975

Are clear-cut areas estimated from LANDSAT imagery reliable?

The reliability of LANDSAT imagery for estimation of clear-cut areas was evaluated by comparison with data obtained from high-altitude photos and logging historical map and from field inspections. A mature forest was selected as a test site because of its continuous clear-cut operation. The forest is about 50 km northwest of Victoria, British Columbia, Canada, and consists of 9092 ha. Areas clear-cut within the past year were overestimated by 12.9%, those clear-cut 1-year or more by 2.2%, whereas uncut mature timber was underestimated by 3.6%. Three clear-cut areas were missed in the logging map and two in the LANDSAT enhancement. The difference between area estimates was significant when all 26 areas were included but not when 2 overestimated areas were excluded from the analysis. The study indicates that LANDSAT imagery color enhancement is a useful tool in up-dating clear-cut areas for long-term planning in forest management.

Lee, Y. J.↗

NASA NTRS1986

Laser Cutting of Thin Nickel Bellows

Laser cutting technique produces narrow, precise, fast, and repeatable cuts in thin nickel-allow bellows material. Laser cutting operation uses intense focused beam to melt material and assisting gas to force melted material through part thickness, creating void. When part rotated or moved longitudinally, melting and material removal continuous and creates narrow, fast, precise, and repeatable cut. Technique used to produce cuts of specified depths less than material thickness. Avoids distortion, dents, and nicks produced in delicate materials during lathe trimming operations, which require high cutting-tool pressure and holding-fixture forces.

Butler, C. L.↗

NASA NTRS2009

Computerized Machine for Cutting Space Shuttle Thermal Tiles

A report presents the concept of a machine aboard the space shuttle that would cut oversized thermal-tile blanks to precise sizes and shapes needed to replace tiles that were damaged or lost during ascent to orbit. The machine would include a computer-controlled jigsaw enclosed in a clear acrylic shell that would prevent escape of cutting debris. A vacuum motor would collect the debris into a reservoir and would hold a tile blank securely in place. A database stored in the computer would contain the unique shape and dimensions of every tile. Once a broken or missing tile was identified, its identification number would be entered into the computer, wherein the cutting pattern associated with that number would be retrieved from the database. A tile blank would be locked into a crib in the machine, the shell would be closed (proximity sensors would prevent activation of the machine while the shell was open), and a "cut" command would be sent from the computer. A blade would be moved around the crib like a plotter, cutting the tile to the required size and shape. Once the tile was cut, an astronaut would take a space walk for installation.

Ramirez, Luis E.↗

DOE OSTI2021

Robust vehicle routing under uncertainty via branch-price-and-cut

Here, this paper contemplates how branch-price-and-cut solvers can be employed along with the robust optimization paradigm to address parametric uncertainty in the context of vehicle routing problems. In this setting, given postulated uncertainty sets for customer demands and vehicle travel times, one aims to identify a set of cost-effective routes for vehicles to traverse, such that the vehicle capacities and customer time window constraints are respected under any anticipated demand and travel time realization, respectively. To tackle such problems, we propose a novel approach that combines cutting-plane techniques with an advanced branch-price-and-cut algorithm. Specifically, we use deterministic pricing procedures to generate "partially robust" vehicle routes and then utilize robust versions of rounded capacity inequalities and infeasible path elimination constraints to guarantee complete robust feasibility of routing designs against demand and travel time uncertainty. In contrast to recent approaches that modify the pricing algorithm, our approach is both modular and versatile. It permits the use of advanced branch-price-and-cut technologies without significant modification, while it can admit a variety of uncertainty sets that are commonly used in robust optimization but could not be previously employed in a branch-price-and-cut setting.

42 ENGINEERING↗

DOE OSTI2018

Enhancement of three-photon near-infrared quantum cutting in β-NaYF4:Er3+ nanoparticles by Ag nanocubes

Highlights: • Three-photon near-infrared quantum cutting is obtained in β-NaYF{sub 4}:Er{sup 3+} NPs. • Quantum cutting efficiency as high as 242.59% is calculated from decay curves. • Plasmon-enhanced three-photon quantum cutting is achieved by Ag nanocubes. • The maximum quantum cutting enhancement factor reaches 2.86. - Abstract: The near-infrared (NIR) quantum cutting (QC) nanoparticles (NPs) β-NaYF{sub 4}:Er{sup 3+} are prepared by coprecipitation method. Three-photon NIR QC luminescence at 1520 nm ({sup 4}I{sub 13/2} → {sup 4}I{sub 15/2}) is obtained under the excitation of 519 nm ({sup 4}I{sub 15/2} → {sup 2}H{sub 11/2}). The corresponding QC efficiency η{sub QC} calculated from the luminescence decay curves reaches as 242.59%. Furthermore, three-photon NIR QC luminescence is enhanced by the localized surface plasmon resonance of Ag nanocubes (NCs). The influence of Ag NCs concentration on three-photon QC luminescence is investigated, and the results show that the optimal concentration of Ag NCs is 0.10% with the enhancement factor reached a maximum as 2.86. Our study may have potential application as a QC layer to improve the photovoltaic conversion efficiency of germanium (Ge) solar cells.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2021

Calculated Roughness Changes due to Clear-Cutting At Savannah River Site

At the Savannah River Site (SRS), multiple facilities are routinely producing and working with radiological constituents which require safety basis modeling by the National Nuclear Safety Administration. The models used to determine the safety basis employ roughness length as an input parameter which describes the roughness of the ground surface which influences momentum exchange near the surface and the subsequent generation of mechanical turbulence. Because roughness length is dependent on surface characteristics, including vegetation, any changes to the surface would have a subsequent impact on the roughness length and require a new safety basis analysis to be performed. An analysis of measurements prior to and after the dear-cuts and thinning was performed and roughness lengths were calculated for each of sixteen wind sectors. Not all sectors contained dear-cuts, so this provides comparison of natural variations in roughness. Based on the results of the estimated changes, consideration will be given to how these changes may affect atmospheric dispersion modeling. It was found that clear-cutting activities generally led to a reduction in roughness. Reductions in roughness length also occurred in some of the wind sectors containing only undisturbed forest, but those in sectors with dear-cuts were found to be slightly greater in magnitude than natural variation. Only in one instance was the change in roughness length found to exceed a decrease of 10%, indicating that there is no significant safety basis to the site as a whole based on previous clear-cutting activities.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Aerosol Measurement from Plasma Arc Torch Cuts on Various Metal for D and D Workers' Internal Dose Calculation - 20253

When dismantling a nuclear power plant, structures must be cut to reduce size. The cutting of radioactive material produces radioactive aerosols, which pose a health risk including radiation risk to site workers and the general public. However, due to a lack of research on the physical and chemical characteristics of aerosols produced in these processes, the calculation of internal dose in the event of an expected or unexpected accident is inaccurate. For the measurement of aerosols generated from cutting for internal dose calculations, we measured the number concentration distribution and nuclide distribution of aerosols from plasma arc cutting in a laboratory experimental setup, considering isokinetic sampling and automatic cutting. The results may suggest internal dose assessment without characteristics of radioactive aerosol has uncertainty and the possibility of being undervalued. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2025

Approximately 15% of Miscanthus yield is lost at current commercial cutting heights in Iowa

Various works have quantitatively characterized the effects of environmental and management factors on Miscanthus x giganteus Greef et Deu (mxg) yield and, therefore, anticipated land requirement per unit production. However, little work has addressed the effects of cutting height, which may significantly contribute to the difference between the standing aboveground biomass at harvest (i.e., biological yield) and harvested yield. This study quantitatively characterized the effect of cutting height using a replicated nitrogen trial of a 5-year-old mxg stand in southeast Iowa and related this information to observations of cutting height in nearby commercial fields. Nitrogen fertilizer did not significantly change the relationship of the stem segment mass to length, and overall, a 1-cm stem segment contributes 0.5% of the total stem biomass within the bottom 44 cm of the stem. This results in an average harvest loss of 15% of the aboveground standing biomass when cutting at 30 cm, typically seen in commercial mxg fields in eastern Iowa. Cutting height should be considered when accurately predicting commercial mxg harvest yields and changes in soil organic carbon in a commercial mxg agroecosystem.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2024

Reflected entropy in random tensor networks. Part III. Triway cuts

For general random tensor network states at large bond dimension, we prove that the integer Rényi reflected entropies (away from phase transitions) are determined by minimal triway cuts through the network. This generalizes the minimal cut description of bipartite entanglement for these states. A natural extrapolation away from integer Rényi parameters, suggested by the triway cut problem, implies the holographic conjecture S R = 2EW, where S R is the reflected entropy and EW is the entanglement wedge cross-section. Minimal triway cuts can be formulated as integer programs which cannot be relaxed to find a dual maximal flow/bit-thread description. This sheds light on the gap between the existence of tripartite entanglement in holographic states and the bipartite entanglement structure motivated by bit-threads. In particular, we prove that the Markov gap that measures tripartite entanglement is lower bounded by the integrality gap of the integer program that computes the triway cut.

AdS-CFT correspondence↗

DOE OSTI2018

Mass-dependent cuts in longitudinal phase space

Here, longitudinal phase space analyses as introduced by van Hove provided a simplified method of separating different reaction production mechanisms. Cuts in the longitudinal phase space can help to select specific reaction kinematics but also induce nonflat acceptance effects in angular distributions. We show that in photoproduction reactions dominated by t -channel exchanges, selection of meson or baryon production over a large mass range can be optimized through calculating mass-dependent cut limits compared to cuts on a van Hove plot sector alone. A cut is presented that improves this selection of one type of hadron production by rejecting another. In addition we demonstrate that using cuts in longitudinal phase space preserves sufficient information to reliably extract observables from the angular distribution of the final state particles.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Data for Approximately 15% of Miscanthus Yield is Lost at Current Commercial Cutting Heights in Iowa

Various works have quantitatively characterized the effects of environmental and management factors on Miscanthus x giganteus Greef et Deu ( mxg ) yield and, therefore, anticipated land requirement per unit production. However, little work has addressed the effects of cutting height, which may significantly contribute to the difference between the standing aboveground biomass at harvest (i.e., biological yield) and harvested yield. This study quantitatively characterized the effect of cutting height using a replicated nitrogen trial of a 5-year-old mxg stand in southeast Iowa and related this information to observations of cutting height in nearby commercial fields. Nitrogen fertilizer did not significantly change the relationship of the stem segment mass to length, and overall, a 1-cm stem segment contributes 0.5% of the total stem biomass within the bottom 44 cm of the stem. This results in an average harvest loss of 15% of the aboveground standing biomass when cutting at 30 cm, typically seen in commercial mxg fields in eastern Iowa. Cutting height should be considered when accurately predicting commercial mxg harvest yields and changes in soil organic carbon in a commercial mxg agroecosystem.

Biomass Analytics↗

DOE OSTI2024

In Search of Optimum Fresh-Cut Raw Material: Using Computer Vision Systems as a Sensory Screening Tool for Browning-Resistant Romaine Lettuce Accessions

The popularity of ready-to-eat (RTE) salads has prompted novel technology to prolong the shelf life of their ingredients. Fresh-cut romaine lettuce is widely used in RTE salads; however, its tendency to quickly discolor continues to be a challenge for the industry. Selecting the ideal lettuce accessions for use in RTE salads is essential to ensure maximum shelf life, and it is critical to have a practical way to assess and compare the quality of multiple lettuce accessions that are being considered for use in fresh-cut applications. Thus, in this work we aimed to determine whether a computer vision system (CVS) composed of image acquisition, processing, and analysis could be effective to detect visual quality differences among 16 accessions of fresh-cut romaine lettuce during postharvest storage. The CVS involved a post-capturing color correction, effective image segmentation, and calculation of a browning index, which was tested as a predictor of quality and shelf life of fresh-cut romaine lettuce. The results demonstrated that machine vision software can be implemented to replace or supplement the scoring of a trained panel and instrumental quality measurements. Overall visual quality, a key sensory parameter that determines food preferences and consumer behavior, was highly correlated with the browning index, with a Pearson correlation coefficient of −0.85. Other important sensory decision parameters were also strongly or moderately correlated with the browning index, with Pearson correlation coefficients of −0.84 for freshness, 0.79 for off odor, and 0.57 for browning. The ranking of the accessions according to quality acceptability from the sensory evaluation produced a similar pattern to those obtained with the CVS. This study revealed that multiple lettuce accessions can be effectively benchmarked for their performance as fresh-cut sources via a CVS-based method. Future opportunities and challenges in using machine vision image processing to predict consumer preferences for RTE salad greens is also discussed.

Agriculture↗

NASA NTRS1978

Optimum wall impedance for spinning modes: A correlation with mode cut-off ratio

A correlating equation relating the optimum acoustic impedance for the wall lining of a circular duct to the acoustic mode cut-off ratio, is presented. The optimum impedance was correlated with cut-off ratio because the cut-off ratio appears to be the fundamental parameter governing the propagation of sound in the duct. Modes with similar cut-off ratios respond in a similar way to the acoustic liner. The correlation is a semi-empirical expression developed from an empirical modification of an equation originally derived from sound propagation theory in a thin boundary layer. This correlating equation represents a part of a simplified liner design method, based upon modal cut-off ratio, for multimodal noise propagation.

Rice, E. J.↗

NASA NTRS1978

Optimum wall impedance for spinning modes - A correlation with mode cut-off ratio

A correlating equation relating the optimum acoustic impedance for the wall lining of a circular duct to the acoustic mode cut-off ratio is presented and compared to exact calculations. The optimum impedance was correlated with cut-off ratio because the cut-off ratio appears to be the fundamental parameter governing the propagation of sound in the duct. Modes with similar cut-off ratios respond in a similar way to the acoustic liner. The correlating equation is useful for the design of suppressors for aircraft engine inlets having a steady mean flow with a boundary layer and spinning mode noise source excitation. The correlation is a semi-empirical expression developed from an empirical modification of an equation originally derived from sound propagation theory in a thin boundary layer. Exact calculations of the optimum wall impedance were made over a wide range of frequency parameters, boundary layer thicknesses and flow Mach numbers to develop and verify the correlation. This correlating equation represents a part of a simplified liner design method, based upon modal cut-off ratio, for multimodal noise propagation.

Rice, E. J.↗

NASA NTRS1980

The effects of cutting or of stretching skeletal muscle in vitro on the rates of protein synthesis and degradation

Skeletal muscle preparations using cut muscle fibers have often been used in studies of protein metabolism. The present paper reports an investigation of the effect of muscle cutting or stretching in vitro on the rates of protein synthesis and/or degradation. Protein synthesis and content, and ATP and phosphocreatine levels were monitored in soleus and extensor digitorum longus muscles from the rat with various extents of muscle fiber cuts and following stretching to about 120% the resting length. Rates of protein synthesis are found to be significantly lower and protein degradation higher in the cut muscles than in uncut controls, while ATP and phosphocreatine concentrations decreased. Stretched intact muscles, on the other hand, are observed to have higher concentrations of high-energy phosphates than unstretched muscles, while rates of protein degradation were not affected. Results thus demonstrate that the cutting of skeletal muscle fibers alters many aspects of muscle metabolism, and that moderate decreases in ATP concentration do not alter rates of protein concentration in intact muscles in vitro.

Seider, M. J.↗