Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CURIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Room temperature crystal field splitting of curium resolved by circularly polarized luminescence spectroscopy

Coordination of Cm(III) with a chiral decadentate ligand N,N,N',N'-tetrakis[(6-carboxypyridin-2-yl)methyl]-1,2-diaminocyclohexane (tpadac) generated complexes with strong luminescence allowing for the unprecedented measurement of well-resolved Cm(III) circularly polarized luminescence spectra. Quantitative resolution of the electronic structure of the [Cm(tpadac)][K] complexes was achieved at room temperature, highlighting the strength of the combination of luminescence and circularly polarized luminescence spectroscopies to unravel the fundamental electronic structure of Cm(III). These results are a clear demonstration that these spectroscopies are powerful yet simple tools for the fundamental understanding of electronic structure, which opens the door to future investigations of other Cm(III) complexes in geometries relevant to nuclear applications, and even other 5f-elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiological Characterization Technical Report for Curium-244 Sealed Source Transuranic Debris Waste for the Off-Site Source Recovery Project at Los Alamos National Laboratory

This document describes the development and approach for the radiological characterization of Cm-244 sealed sources for shipment to the Waste Isolation Pilot Plant. The document uses the extensive documentation and information on the nuclear material content of each source (mass or activity of material used) and information and data on the radionuclide distributions within the nuclear material. This information allows complete characterization without the need for additional measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Hydrothermal syntheses, structural, Raman, and luminescence studies of Cm[M(CN){sub 2}]{sub 3}.3H{sub 2}O and Pr[M(CN){sub 2}]{sub 3}.3H{sub 2}O (M=Ag, Au)

We have prepared Cm[Au(CN){sub 2}]{sub 3}.3H{sub 2}O and Cm[Ag(CN){sub 2}]{sub 3}.3H{sub 2}O as a part of our continuing investigations into the chemistry of the 5f-elements' dicyanometallates. Single crystals of Cm[Au(CN){sub 2}]{sub 3}.3H{sub 2}O were obtained from the reaction of CmCl{sub 3} and KAu(CN){sub 2} under mild hydrothermal conditions. Due to similarities in size, the related praseodymium compounds were also synthesized and characterized for comparison with the actinide systems. The compounds crystallize in the hexagonal space group P6{sub 3}/mcm, where the curium and the transition metals interconnect through cyanide bridging. Crystallographic data (Mo K{alpha}, {lambda}=0.71073 A): Cm[Au(CN){sub 2}]{sub 3}.3H{sub 2}O (1), a=6.6614(5) A, c=18.3135(13) A, V=703.77(9), Z=2; Pr[Au(CN){sub 2}]{sub 3}.3H{sub 2}O (3), a=6.6662(8) A, c=18.497(3) A, V=711.83(17), Z=2; Pr[Ag(CN){sub 2}]{sub 3}.3H{sub 2}O (4), a=6.7186(8) A, c=18.678(2) A, V=730.18(14), Z=2. The Cm{sup 3+} and/or Pr{sup 3+} ions are coordinated to six N-bound CN{sup -} groups resulting in a trigonal prismatic arrangement. Three oxygen atoms of coordinated water molecules tricap the trigonal prismatic arrangement providing a coordination number of nine for the f-elements. The curium ions in both compounds exhibit a strong red emission corresponding to the {sup 6}D{sub 7/2}{yields}{sup 8}S{sub 7/2} transition. This transition is observed at 16,780 cm{sup -1}, with shoulders at 17,080 and 16,840 cm{sup -1} for the Ag complex, while the emission is red shifted by {approx}100 cm{sup -1} in the corresponding gold complex. The Pr systems also provide well-resolved emissions upon f-f excitation. - Graphical abstract: Coordination polymeric compounds between a trans-plutonium element, curium and transition metal ions, gold(I) and silver(I), were prepared using the hydrothermal synthetic procedure. The curium ion and the transition metals are interconnected through cyanide bridging. The Cm ion has a tricapped trigonal prismatic coordination environment with coordination number of nine. Detail photoluminescence studies of the complexes are also reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Processing and Disposition of Special Actinide Target Materials - 17071

The DOE manages an inventory of materials that contain a range of long-lived radioisotopes that were produced from the 1960's through the 1980's by irradiating targets in high-flux reactors at the SRS to produce special heavy isotopes for DOE programmatic use, scientific research, and industrial and medical applications. Among the products were Cf-249, -250, -251, and -252; heavy curium (=50% Cm-246); and Pu-242 and -244. The irradiation of the Mark-18A (Mk-18A) targets at extremely high fluxes produced the world's supply of heavy curium and Pu-244. Approximately one fourth of the Mk-18A targets were processed in the 1970's to recover and enrich the material that has been used as the global source of Pu-244 and heavy curium by industry and researchers. These isotopes are still in demand, and the available supply of purified material is dwindling. A program has been initiated to recover heavy curium and Pu-244 from the remaining stored unprocessed Mk-18A targets. Improved flowsheets to process the materials to recover Pu-244 and heavy curium are being developed. Evaluations are also underway to determine whether additional materials present in the targets in much smaller quantities, such as long-lived fission product (LLFP) isotopes, can be recovered for research and development applications. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Detection limits for actinides in a monochromatic, wavelength-dispersive x-ray fluorescence instrument

Recent developments in x-ray optics have made it possible to examine the L x-rays of actinides using doubly-curved crystals in a bench-top device. A doubly-curved crystal (DCC) acts as a focusing monochromatic filter for polychromatic x-rays. A Monochromatic, Wavelength-Dispersive X-Ray Fluorescence (MWDXRF) instrument that uses DCCs to measure Cm and Pu in reprocessing plant liquors was proposed in 2007 by the authors at Los Alamos National Laboratory. A prototype design of this MWDXRF instrument was developed in collaboration with X-ray Optical Systems Inc. (XOS), of East Greenbush, New York. In the MWDXRF instrument, x-rays from a Rhodium-anode x-ray tube are passed through a primary DCC to produce a monochromatic beam of 20.2-keV photons. This beam is focused on a specimen that may contain actinides. The 20.2-keV interrogating beam is just above the L3 edge of Californium; each actinide (with Z = 90 to 98) present in the specimen emits characteristic L x-rays as the result of L3-shell vacancies. In the LANL-XOS prototype MWDXRf, these x-rays enter a secondary DCC optic that preferentially passes 14.961-keV photons, corresponding to the L-alpha-1 x-ray peak of Curium. In the present stage of experimentation, Curium-bearing specimens have not been analyzed with the prototype MWDXRF instrument. Surrogate materials for Curium include Rubidium, which has a K-beta-l x-ray at 14.961 keV, and Yttrium, which has a K-alpha-1 x-ray at 14.958 keV. In this paper, the lower limit of detection for Curium in the LANL-XOS prototype MWDXRF instrument is estimated. The basis for this estimate is described, including a description of computational models and benchmarking techniques used. Detection limits for other actinides are considered, as well as future safeguards applications for MWDXRF instrumentation.

36 MATERIALS SCIENCE↗

Decomposition Analysis of Neodymium Loaded Resin

In an effort to understand and quantify the carbon and sulfur contents of a curium oxide production process performed in the hot cells at Oak Ridge National Laboratory’s Radiochemical Engineering Development Center, a non-radioactive surrogate was used in a similar oxide formation process. Neodymium (Nd), which was chosen as a substitute for curium, was loaded onto a Dowex 50W-X8 resin by use of ion exchange column techniques and then treated under a variety of processing conditions. The surrogate product was analyzed for carbon and sulfur impurities, using inductively coupled plasma–mass spectrometry for sulfur assessment, a LECO combustion furnace/analyzer for carbon quantification, and X-ray diffraction for compound identification. The results indicate that the carbon and sulfur contents in the Nd oxide were similar to current estimations for curium oxide using the reference hot cell process. It was also seen that the major surrogate product of the hot cell process contained sulfur in a Nd oxysulfate (Nd2O2SO4) compound. Parametric analysis of the resin decomposition process revealed that increasing the temperature to 1400°C yielded considerably better removal of carbon and sulfur.

Curium Targets↗

Atalante research facility new mass limits in a unit containing plutonium and minor actinides - 14402

ATALANTE, located in Marcoule, is one of the main Nuclear Facilities of the French Alternative Energies and Atomic Energy Commission (CEA). This facility is mainly dedicated to research and development for nuclear energy related to the back end of the fuel cycle: spent fuel and final waste management. It is a large research complex housing chemistry and analytical laboratories and shielded cells (240 glove boxes and 11 shielded cells), equipped for basic studies through to demonstration experiments. Within the facility, one unit can contain plutonium and curium at the same time. In this case, nuclear criticality safety is achieved by exercising control over mass. A subcritical mass limit is defined for plutonium (280 g for {sup 239}Pu) and an exemption mass limit (3 g for {sup 245}Cm) is used for the actinide. In order to increase the maximum mass (in particular {sup 245}Cm) which can be handled in the unit, new mass control limits were studied, based on control over the sum of the mass ratio to the upper subcritical mass, noted m{sub lim}, for each nuclide (350 g for {sup 239}Pu; 34.8 g or 23 g for {sup 245}Cm) as shown in equation (1) below. m({sup 239}Pu)/ m{sub lim}({sup 239}Pu)+ m({sup 245}Cm)/m{sub lim}({sup 245}Cm)≤1 (1) To validate this criticality safety control method, a study was conducted to demonstrate that, for different masses of {sup 239}Pu and {sup 245}Cm meeting equation (1), the calculated effective multiplication factor is always lower than the effective multiplication factor corresponding to a sphere of 350 g of pure {sup 239}Pu, moderated, with 20 cm water reflection. The two pseudo fissile media are: - metallic plutonium (100% {sup 239}Pu, density 19.86), moderated with water, - metallic curium (100% {sup 245}Cm, density 13.566), moderated with water. The calculation model is a sphere of {sup 245}Cm metal positioned in a sphere of {sup 239}Pu metal, with optimum moderation for each fissile material, and a full water reflection (20 cm). The results show that, under certain conditions, the effective multiplication factor of the mixture can be higher than the effective multiplication factor of each pure fissile material when using the upper subcritical mass of 34.8 g for {sup 245}Cm. When using 23 g of {sup 245}Cm, the k{sub eff} of the mixture is always lower than the k{sub eff} of pure {sup 239}Pu. These calculations enable the safety documentation to be changed by introducing a new process operational procedure, based on equation (1). This change in procedure allows the operator to work with a larger quantity of curium in the unit. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Verification of plutonium content in spent fuel assemblies using neutron self-interrogation

The large amounts of plutonium in reactor spent fuel assemblies has led to increased research directed toward the measurement of the plutonium for safeguards verification. The high levels of fission product gamma-ray activity and curium neutron backgrounds have made the plutonium measurement difficult. We have developed a new technique that can directly measure both the {sup 235}U concentration and the plutonium fissile concentration using the intrinsic neutron emission fronl the curium in the fuel assembly. The passive neutron albedo reactivity (PNAR) method has been described previously where the curium neutrons are moderated in the surrounding water and reflect back into the fuel assembly to induce fissions in the fissile material in the assembly. The cadmium (Cd) ratio is used to separate the spontaneous fission source neutrons from the reflected thermal neutron fission reactions. This method can measure the sum of the {sup 235}U and the plutonium fissile mass, but not the separate components. Our new differential die-away self-interrogation method (DDSI) can be used to separate the {sup 235}U from the {sup 239}Pu. The method has been applied to both fuel rods and full assemblies. For fuel rods the epi-thermal neutron reflection method filters the reflected neutrons through thin Cd filters so that the reflected neutrons are from the epi-cadmium energy region. The neutron fission energy response in the epi-cadmium region is distinctly different for {sup 235}U and {sup 239}Pu. We are able to measure the difference between {sup 235}U and {sup 239}Pu by sampling the neutron induced fission rate as a function of time and multiplicity after the initial fission neutron is detected. We measure the neutron fission rate using list-mode data collection that stores the time correlations between all of the counts. The computer software can select from the data base the time correlations that include singles, doubles, and triples. The die-away time for the doubles distribution is distinctly different for {sup 235}U and {sup 239}Pu. The {sup 239}Pu has a higher fission cross-section in the epi-cadmium neutron region and larger induced fission moments than {sup 235}U, so the measured die-away time can provide the relative amounts of {sup 239}Pu and {sup 235}U. This paper will present the Monte Carlo simulations for the detector and sample configurations for both fuel pins and full fuel assemblies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Contrasting Trivalent Lanthanide and Actinide Complexation by Polyoxometalates via Solution-State NMR

Deciphering the solution chemistry and speciation of actinides is inherently difficult due to radioactivity, rarity, and cost constraints, especially for transplutonium elements. In this context, the development of new chelating platforms for actinides and associated spectroscopic techniques is particularly important. In this study, we investigate a relatively overlooked class of chelators for actinide binding, namely, polyoxometalates (POMs). We provide the first NMR measurements on americium–POM and curium–POM complexes, using one-dimensional (1D) 31 P NMR, variable-temperature NMR, and spin-lattice relaxation time (T 1 ) experiments. The proposed POM–NMR approach allows for the study of trivalent f-elements even when only microgram amounts are available and in phosphate-containing solutions where f-elements are typically insoluble. The solution-state speciation of trivalent americium, curium, plus multiple lanthanide ions (La 3+ , Nd 3+ , Sm 3+ , Eu 3+ , Yb 3+ , and Lu 3+ ), in the presence of the model POM ligand PW 11 O 39 7– was elucidated and revealed the concurrent formation of two stable complexes, [M III (PW 11 O 39 )(H 2 O) x ] 4– and [M III (PW 11 O 39 ) 2 ] 11– . Interconversion reaction constants, reaction enthalpies, and reaction entropies were derived from the NMR data. The NMR results also provide experimental evidence of the weakly paramagnetic nature of the Am 3+ and Cm 3+ ions in solution. Furthermore, the study reveals a previously unnoticed periodicity break along the f-element series with the reversal of T 1 relaxation times of the 1:1 and 1:2 complexes and the preferential formation of the long T 1 species for the early lanthanides versus the short T 1 species for the late lanthanides, americium, and curium. Furthermore, given the broad variety of POM ligands that exist, with many of them containing NMR-active nuclei, the combined POM–NMR approach reported here opens a new avenue to investigate difficult-to-study elements such as heavy actinides and other radionuclides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of a Heterocyclic Nitrogen-Donor Group on the Coordination of Trivalent Actinides and Lanthanides by Aminopolycarboxylate Complexants

Here, the novel metal chelator – N -2-pyridylmethyl-diethylenetriamine- N,N',N'',N'' -tetraacetic acid, DTTA-PyM – was designed to replace a single O-donor acetate group of the well-known aminopolycarboxylate complexant diethylenetriamine- N,N,N',N'',N'' -pentaacetic acid (DTPA) with an N-donor 2-pyridylmethyl. Potentiometric, spectroscopic, computational, and radioisotope distribution methods show distinct differences for the 4f and 5f coordination environments and enhanced actinide binding due to the nitrogen bearing heterocyclic moiety. The Am 3+ , Cm 3+ , Ln 3+ complexation studies for DTTA-PyM reveal an enhanced preference, relative to DTPA, for trivalent actinide binding. Fluorescence studies indicate no changes to the octadentate coordination of trivalent curium, while evidence of heptadentate complexation of trivalent europium is found in mixtures containing EuHL (aq) complexes at the same aqueous acidity. The denticity change observed for Eu 3+ suggests that complex protonation occurs on the pyridyl nitrogen. Formation of the CmHL(aq) complex is likely due to the protonation of an available carboxylate group since the carbonyl oxygen can maintain octadentate coordination through a rotation. The observed suppressed protonation of the pyridyl nitrogen in the Cm complexes may be attributed to stronger trivalent actinide binding by DTTA-PyM. Density functional theory calculations indicate that added stabilization of the actinide complexes with DTTA-PyM may originate from p back-bonding interactions between singly occupied 5 f orbitals of Am 3+ and the pyridyl nitrogen. The differences between the stability of trivalent actinide chelates (Am 3+ , Cm 3+ ) and trivalent lanthanide chelates (La 3+ -Lu 3+ ) are observed in liquid-liquid extraction systems, yielding unprecedented 4 f /5 f differentiation when using DTTA-PyM as an aqueous holdback reagent. In addition, the enhanced N -donor softness of the new DTTA-PyM chelator was perturbed by adding a fluorine onto the pyridine group. The comparative characterization of N -(3-fluoro-2-pyridylmethyl)-diethylenetriamine- N,N',N'',N'' -tetraacetic acid, DTTA-3-F-PyM, showed subdued 4 f /5 f differentiation due to the presence of this electron-withdrawing group.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Experimental and Theoretical Studies of Actinide and Lanthanide Ion Transport Across Supported Liquid Membranes

In this paper, we propose a new transport mechanism for metal ions relevant for used nuclear fuel separation processes by a supported liquid membrane (SLM). Two SLM extraction systems were investigated where the membrane was impregnated with either di-(2-ethylhexyl)phosphoric acid (HDEHP) or tributyl phosphate (TBP). A HDEHP impregnated membrane was used to extract neodymium (III), representative of a typical trivalent lanthanide. Cerium, which was oxidized by sodium bismuthate from trivalent to tetravalent state, was extracted by TBP. Oxidized cerium was used as a surrogate for oxidized americium to investigate the kinetics and possibility of americium and curium separation by membrane extraction. Both extraction systems were operated at varying nitric acid concentrations, and changes in the kinetics and extraction efficiency of metal ions were investigated. The proposed transport mechanism that was chosen for our studies was modified from the previous works by Danesi et al.[1,2] and Cussler et al.[3] The mechanism was selected due to the ability to accommodate and describe transport phenomena across a SLM when formation of extractant nano-channels in the membrane may exist. We were able to obtain acceptable fit of the models to our overall data trends although chemical and physical conditions must be well established and purity and homogeneity of the membrane are critical. A reverse transport of metal ions was observed when leaving the system for longer times which agrees with our model. The membrane was investigated for degradation and shown to be stable after contact with up to 7 M nitric acid for over 2000 minutes. Finally, we examined the possibility of partitioning americium from curium using a SLM impregnated by TBP. Separation of americium from curium was observed although not to a degree that was expected based on the Ce(IV) transport. Incomplete oxidation of Am(III) to Am(V) and reduction of Am(VI) on the membrane surface are possible causes for this observed discrepancy. Our model was, however, able to accurately predict Cm(III) transport through the membrane.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

SRNL Development of Recovery Processes for Mark-18A Heavy Actinide Targets

Savannah River National Laboratory (SRNL) and Oak Ridge National Laboratory (ORNL) are developing plans for the recovery of rare and unique isotopes contained within heavy-actinide target assemblies, specifically the Mark-18A. Mark-18A assemblies were irradiated in Savannah River Site (SRS) reactors in the 1970s under extremely high neutron-flux conditions and produced, virtually, the world's supply of plutonium-244, an isotope of key importance to high-precision actinide measurement and other scientific and nonproliferation uses; and curium highly enriched in heavy isotopes (e.g., curium-246 and curium-248). In 2015 and 2016, SRNL is pursuing tasks that would reduce program risk and budget requirements, including further characterization of unprocessed targets; engineering studies for the use of the SRNL Shielded Cells Facility (SCF) for recovery; and development of onsite and offsite shipping methods including a replacement for the heavy (70 ton) cask previously used for onsite transfer of irradiated items at SRS. A status update is provided for the characterization, including modeling using the Monte Carlo N-Particle Transport Code (MCNP); direct non-destructive assay measurements; and cask design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation and Extraction of Americium(VI) from Lanthanides

Partitioning and transmutation of americium and curium has been the subject of significant research in the nuclear fuel cycle over the past two decades. Numerous approaches have been studied to separate these elements from the lanthanide elements to enable their recycle and transmutation. Americium is one of the primary long-term heat sources in used nuclear fuel, which may impact repository loading. The lanthanides are both a) neutron poisons, reducing reactor performance, if recycled, and b) can chemically interact with fuel cladding to cause early failure, if present in sufficient concentration. Chemical separation approaches for heterogeneous fuel recycle, typically utilize proven technology (PUREX or modifications to the PUREX process) to remove uranium and plutonium from the dissolved fuel (and if desired, can remove neptunium as well). Follow-on processing is then required to separate the americium and curium, or the americium alone (for target fabrication). In a homogeneous recycle approach, the bulk of the uranium is typically separated first, followed by additional processing to remove the transuranic elements as a group. Because of the chemical similarity of the americium with the lanthanides, and particularly with curium, these separate processes are difficult. Utilizing the unique valence states of americium (primarily the (VI) oxidation state), opens up new opportunities for the separation of americium for either heterogeneous recycle (enabling americium separation alone) or homogeneous recycle (separating americium together with plutonium and neptunium). The US Department of Energy Fuel Cycle Technologies program has been researching methods to oxidize americium and to extract it from lanthanides as americium(VI), preferably from molar nitric acid solutions. Early efforts identified sodium bismuthate as an effective oxidant, which enabled testing of the extraction of americium(VI) by tributyl phosphate and diamylamylphosphonate. Successful extraction of americium(VI) was demonstrated in this system, in both batch contact laboratory tests and in centrifugal contactors; however, the sodium bismuthate is a solid, and must be in excess of saturation with the solution. This creates some engineering challenges in the process. A significant effort to identify alternative oxidants has led to a number of promising approaches. Silver-catalyzed ozone, copper(III) periodate, and electrochemical oxidation of americium from the trivalent to hexavalent state have all been successfully demonstrated in laboratory experiments. These approaches would enable oxidation and extraction of americium without having to filter solids. Once the americium is oxidized, a key issue is how long it will remain in the hexavalent state. Investigations have shown that some materials of construction (e.g., tantalum) do not reduce americium as quickly as stainless steel. Also, alternative extractants, such as amides, do not appear to reduce the americium as rapidly as the phosphate or phosphonate extractants. While still early in their development, these advances in the technology offer some positive indications that a workable extraction process for the separation of americium(VI) can be realized in the near future.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗