Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CS2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Improving the efficiencies of small molecule solar cells by solvent vapor annealing to enhance J-aggregation

Here, we report highly efficient small molecule organic solar cells (SM-OSCs) based on a porphyrin derivative electron donor of ZnP2-DPP and an electron acceptor of [6,6]-phenyl-C 61 -butyric acid methyl ester (PC 60 BM) by using a solvent vapor annealing (SVA) method with a series of low boiling solvents. Absorption spectral studies indicate that carbon disulfide (CS 2 ) SVA induces J-aggregation in blend films accompanied by expanded and enhanced absorption which contributes largely to the fabrication of broader light response and larger short-circuit current (J SC ) solar cell devices. In addition, we systematically analyze the relationship between the film morphology and device performance. Finally, the electronic study shows that the CS 2 SVA-treated device showed a higher exciton generation rate and enhanced carrier collection efficiency. And the morphology study indicates that the blend films treated with CS2 SVA exhibit tighter molecular packing, better crystallization and an appropriate phase separation length scale. In other words, these collective electronic and morphological features correlate well with the champion J SC , the fill factor (FF) and the power conversion efficiency (PCE) of the CS 2 treated devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Partial Structure factor determination of liquid carbon dioxide and carbon disulfide

We report the results of neutron and X-ray diffraction experiments as well as MD simulations ofliquid CO2 and liquid CS2 at the same molecular density. We used a combination of the 12C/13Cneutron scattering contrast and the X-ray data (2N+X method) to deduce partial structure factors.Our data give no indication that CO2 is non-linear as has been suggested recently. The partial pairdistributionfunction information is also analyzed within the Bhatia- Thornton formalism and interms of the relative orientation of neighboring molecules. The influence of various model parameterson the thermodynamics and the structure of the molecular liquids can be quantified.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cs 2 UPd 3 Se 6

Dicaesium uranium(IV) tripalladium(II) hexaselenide, Cs 2 UPd 3 Se 6 , crystallizes in the space group Fmmm in the Ba 2 NaCu 3 O 6 structure type. The asymmetric unit comprises the following atoms with site symmetries as shown: U1 (mm2), Cs1 (222), Cs2 (m2m), Pd1 (.m.), Pd2 (2mm), Se1 (m..), and Se2 (1). This layered structure contains six edge-sharing square-planar [PdSe4] units that form a hexagon. These, in turn, edge-share with [USe 6 ] trigonal–prismatic units, forming an extended layer parallel to (010). The layers are stacked along [010]. They are staggered, and are separated by the Cs atoms. The Cs atoms are either coordinated in a square antiprism of Se atoms or are ten-coordinate, with one square face and the opposite face hexagonal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Materials Data on Cs2PH3SeO8 by Materials Project

Cs2(HSeO4)(H2PO4) crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional. there are two inequivalent Cs1+ sites. In the first Cs1+ site, Cs1+ is bonded in a 7-coordinate geometry to nine O2- atoms. There are a spread of Cs–O bond distances ranging from 3.13–3.65 Å. In the second Cs1+ site, Cs1+ is bonded in a 6-coordinate geometry to one H1+ and nine O2- atoms. The Cs–H bond length is 3.21 Å. There are a spread of Cs–O bond distances ranging from 3.07–3.64 Å. P5+ is bonded in a tetrahedral geometry to four O2- atoms. There are a spread of P–O bond distances ranging from 1.50–1.59 Å. There are three inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a distorted linear geometry to one Cs1+ and two O2- atoms. There is one shorter (1.04 Å) and one longer (1.51 Å) H–O bond length. In the second H1+ site, H1+ is bonded in a linear geometry to two O2- atoms. There is one shorter (1.05 Å) and one longer (1.48 Å) H–O bond length. In the third H1+ site, H1+ is bonded in a linear geometry to two O2- atoms. There is one shorter (1.03 Å) and one longer (1.54 Å) H–O bond length. Se6+ is bonded in a tetrahedral geometry to four O2- atoms. There are a spread of Se–O bond distances ranging from 1.66–1.69 Å. There are eight inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 120 degrees geometry to two equivalent Cs1+, one P5+, and one H1+ atom. In the second O2- site, O2- is bonded in a bent 120 degrees geometry to two Cs1+, one P5+, and one H1+ atom. In the third O2- site, O2- is bonded in a bent 120 degrees geometry to two equivalent Cs1+, one P5+, and one H1+ atom. In the fourth O2- site, O2- is bonded in a distorted single-bond geometry to three equivalent Cs1+ and one Se6+ atom. In the fifth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to two equivalent Cs1+, one H1+, and one Se6+ atom. In the sixth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to two equivalent Cs1+, one H1+, and one Se6+ atom. In the seventh O2- site, O2- is bonded in a bent 120 degrees geometry to two Cs1+, one H1+, and one Se6+ atom. In the eighth O2- site, O2- is bonded in a distorted single-bond geometry to three equivalent Cs1+ and one P5+ atom.

36 MATERIALS SCIENCE↗

ITER Central Solenoid Alternate Pre-Compression Structure Concept and Analysis

The ITER Central Solenoid (CS) is comprised of six independent coils held together by a pre-compression support structure. This structure must provide enough preload to maintain sufficient coil-to-coil contact throughout the current pulse. End of burn (EOB) represents one extreme time-point when the currents in the CS3 coils oppose those of CS1 & CS2. The present baseline design uses nine tie plate pairs located on the coil ID and OD to achieve this pre-compression. While this is an efficient structural approach, the outer tie plates limit access to the coil OD and result in very tight tolerances over the 12.75 m tall toroidal field (TF) coil bore. An alternative pre-compression structure has been developed by the US ITER Project Office, which addresses both of these issues using only internal tension members. This allows clear access to the outer CS surface for plumbing and current feeders, and more reasonable OD tolerances. In addition, the Tension Rod pre-compression structure utilizes existing technology (such as hydraulic tensioner or Superbolt{reg_sign}), which streamlines initial preloading and subsequent adjustments. Structural and transient electromagnetic FEA of the tension rod concept demonstrates that the stresses, displacements, and preliminary Eddy current heat loads are within allowable limits. Fabrication estimates demonstrate no additional cost of the tension rods compared to the tie plates.

36 MATERIALS SCIENCE↗

ITER Central Solenoid support structure analysis

The ITER Central Solenoid (CS) is comprised of six independent coils held together by a pre-compression support structure. This structure must provide enough preload to maintain sufficient coil-to-coil contact and interface load throughout the current pulse. End of burn (EOB) represents one of the most extreme time-points doing the reference scenario when the currents in the CS3 coils oppose those of CS1 & CS2. The CS structure is performance limited by the room temperature static yield requirements needed to support the roughly 180 MN preload to resist coil separation during operation. This preload is applied by inner and external tie plates along the length of the coil stack by mechanical fastening methods utilizing Superbolt technology. The preloading structure satisfies the magnet structural design criteria of ITER and will be verified during mockup studies. The solenoid is supported from the bottom of the toroidal field (TF) coil casing in both the vertical radial directions. The upper support of the CS coil structure maintains radial registration with the TF coil in the event of vertical disruptions (VDE) loads and earthquakes. All of these structure systems are analyzed via a global finite element analysis (FEA). The model includes a complete sector of the TF coil and the CS coil/structure in one self-consistent analysis. The corresponding results and design descriptions are described in this report.

42 ENGINEERING↗

Methods and systems for treating liquids using switchable solvents

A method of treating a liquid. The method comprises providing a feed liquid comprising at least one solvent and at least one solute to a first side of a membrane. A single-phase draw solution comprising at least one of an aminium salt, an amidinium salt, and a guanidinium salt is provided to a second side of the membrane. The at least one solvent is osmosed across the membrane and into the single-phase draw solution to form a diluted single-phase draw solution. At least one of CO2, CS2, and COS is removed from the diluted single-phase draw solution to form a first multiple-phase solution comprising a first liquid phase comprising the at least one solvent, and a second liquid phase comprising at least one of an amine compound, an amidine compound, and a guanidine compound. A liquid purification system is also described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Production of liquids and reduced sulfur gaseous products from sour natural gas

Aspects of the invention are associated with the discovery of approaches for the conversion of sour natural gas streams, by conversion to liquid hydrocarbons. Particular processes and their associated apparatuses advantageously combine (i) dehydroaromatization (DHA) of methane in a gaseous feedstock, to produce aromatic hydrocarbons such as benzene, with (ii) the reaction of H2S and methane in this feedstock, to produce organic sulfur compounds such as carbon disulfide (CS2) and thiophene (C4H4S). A gaseous product having a reduced concentration of H2S is thereby generated. The aromatic hydrocarbons and organic sulfur compounds may be recovered in a liquid product. Both the gaseous and liquid products may be easily amenable to further upgrading. Other advantages of the disclosed processes and apparatuses reside in their simplicity, whereby the associated streams, including a potential gaseous recycle, generally avoid high partial pressures of H2S.

03 NATURAL GAS↗

Reversible Acid Gas Capture Using CO2-Binding Organic Liquids

Acid gas scrubbing technology is predominantly aqueous alkanolamine based. Of the acid gases, CO2, H2S and SO2 have been shown to be reversible, however there are serious disadvantages with corrosion and high regeneration costs. The primary scrubbing system composed of monoethanolamine is limited to 30% by weight because of the highly corrosive solution. This gravimetric limitation limits the CO2 volumetric (≤108 g/L) and gravimetric capacity (≤7 wt%) of the system. Furthermore the scrubbing system has a large energy penalty from pumping and heating the excess water required to dissolve the MEA bicarbonate salt. Considering the high specific heat of water (4 j/g-1K-1), low capacities and the high corrosion we set out to design a fully organic solvent that can chemically bind all acid gases i.e. CO2 as reversible alkylcarbonate ionic liquids or analogues thereof. Having a liquid acid gas carrier improves process economics because there is no need for excess solvent to pump and to heat. We have demonstrated illustrated in Figure 1, that CO2-binding organic liquids (CO2BOLs) have a high CO2 solubility paired with a much lower specific heat (<1.5 J/g-1K-1) than aqueous systems. CO2BOLs are a subsection of a larger class of materials known as Binding Organic Liquids (BOLs). Our BOLs have been shown to reversibly bind and release COS, CS2, and SO2, which we denote COSBOLS, CS2BOLs and SO2BOLs. Our BOLs are highly tunable and can be designed for post or pre-combustion gas capture. The design and testing of the next generation zwitterionic CO2BOLs and SO2BOLs are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Materials Data on Cs2SrV4O12 (SG:123) by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on Cs2Mo3SeO12 (SG:173) by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on Cs2FeH12(SO7)2 (SG:14) by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on Cs2FeO4 (SG:62) by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on Cs2K4Fe2O5 (SG:12) by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on Cs2MnO4 (SG:62) by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on Cs2CoO3 (SG:64) by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on Cs2Co(NO3)4 (SG:2) by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

Materials Data on Cs2VF6 (SG:63) by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗