Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONVERGENT-DIVERGENT NOZZLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1951

Velocity and Temperature Fields in Circular Jet Expanding from Choked Nozzle into Quiescent Air

The Mach number and temperature profiles in jets expanding from convergent and convergent-divergent nozzles are presented for several values of nozzle-exit pressure ratio. The effects of jet temperature, Reynolds number, and humidity on jet spreading are briefly evaluated. The results indicated that the downstream Mach number profiles for a heated jet are slightly narrower than those for a unheated jet, whereas the downstream temperature profiles were unaffected by nozzle temperature change, and that the effects of Reynolds number and humidity were negligible.

FLOW, SUPERSONIC↗
NASA NTRS1952

Investigation at Mach Number 1.91 of Spreading Characteristics of Jet Expanding from Choked Nozzles

It is demonstrated that the temperature profiles of jets expanding into a supersonic stream are considerably smaller than the temperature profiles of jets expanding into quiescent air. The effect on the wake of varying afterbody geometry is shown to be small. The gross spreading characteristics of jets expanding from convergent and convergent-divergent nozzles in the base of a body of revolution with various boattail configurations at a Mach number of 1.91 are presented.

EXITS↗
NASA NTRS1954

Effect of Jet-nozzle-expansion Ratio on Drag of Parabolic Afterbodies

The interaction of the flow from one convergent and two convergent-divergent nozzles on parabolic afterbodies was studied at free-stream Mach numbers of 2.0, 1.6, and 0.6 over a range of jet pressure ratio. The influence of the jet on boattail and base drag was very pronounced. Study of the total external afterbody drag values at supersonic speeds indicated that, over most of the high-pressure-ratio range, increasing the nozzle design expansion ratio increased the drag even though the boattail area was reduced. Increasing the pressure ratio tended to increase slightly the total-drag increment caused by angle-of-attack operation.

Englert, Gerald W↗
NASA NTRS1957

Far Noise Field of Air Jets and Jet Engines

An experimental investigation was conducted to study and compare the acoustic radiation of air jets and jet engines. A number of different nozzle-exit shapes were studied with air jets to determine the effect of exit shape on noise generation. Circular, square, rectangular, and elliptical convergent nozzles and convergent-divergent and plug nozzles were investigated. The spectral distributions of the sound power for the engine and the air jet were in good agreement for the case where the engine data were not greatly affected by reflection or jet interference effects. Such power spectra for a subsonic or slightly choked engine or air jet show that the peaks of the spectra occur at a Strouhal number of 0.3.

Callaghan, Edmund E↗
NASA NTRS1960

Performance of Several Conical Convergent-Divergent Rocket-Type Exhaust Nozzles

An investigation was conducted to obtain nozzle performance data with relatively large-scale models at pressure ratios as high as 120. Conical convergent-divergent nozzles with divergence angles alpha of 15, 25, and 29 deg. were each tested at area ratios of approximately 10, 25, and 40. Heated air (1200 F) was supplied at the nozzle inlet at pressures up to 145 pounds per square inch absolute and was exhausted into quiescent air at pressures as low as 1.2 pounds per square inch absolute. Thrust ratios for all nozzle configurations are presented over the range of pressure ratios attainable and were extrapolated when possible to design pressure ratio and beyond. Design thrust ratios decreased with increasing nozzle divergence angle according to the trend predicted by the (1 + cos alpha)/2 parameter. Decreasing the nozzle divergence angle resulted in sizable increases in thrust ratio for a given surface-area ratio (nozzle weight), particularly at low nozzle pressure ratios. Correlations of the nozzle static pressure at separation and of the average static pressure downstream of separation with various nozzle parameters permitted the calculation of thrust in the separated-flow region from unseparated static-pressure distributions. Thrust ratios calculated by this method agreed with measured values within about 1 percent.

Campbell, C. E.↗
NASA NTRS1960

Effect of Base Bleed and Terminal Fairings on the Performance of Exhaust-Nozzle-Afterbody Combinations at Mach Numbers of 1.93, 2.55, and 3.05

An investigation of four exhaust-nozzle-afterbody combinations has been conducted in the Langley 9- by 12-inch blowdown tunnel at Mach numbers of 1.93, 2.55, and 3.05. The models were tested on a pylon-mounted nacelle and the jet exhaust was simulated with cold air. Base bleed w a s varied from 0 to about 12 percent of the primary jet weight flow and was discharged in to the base region through either a sonic or supersonic bleed nozzle. The models were tested at zero degree angle of attack and the Reynolds number range was from 8 x 10(exp 6) to 9 x 10(exp 6) per foot. The results indicate that the base pressure and the performance of the exhaust-nozzle-afterbody combinations were little affected gy the high-velocity base bleed. The efficiency of the terminal-fairing model was only slightly less than that of the convergent-divergent nozzle-afterbody combinations; this difference indicates the loss associated with improved transonic efficiency at higher Mach numbers.

Norton, Harry T., Jr.↗
NASA NTRS1953

Analysis of the turbojet engine for propulsion of supersonic fighter airplanes / David S. Gabriel, Richard P. Krebs, E.Clinton Wilcox, Stanley L.Koutz

An analytical investigation was made of two supersonic interceptor type airplanes to determine the most desirable turbojet engine characteristics for this application The airplanes were designed differently primarily because of the amount of subsonic flight incorporated in the flight plan--one flight having none and the other, a cruise radius of 400 nautical miles. Several power plant design variables were varied independently to determine the effect of changes in each parameter on airplane performance. These parameters included compressor pressure ratio, compressor efficiency, turbine-inlet temperature, afterburner temperature, engine specific weight, and air-handling capacity. The effects of using a convergent-divergent exhaust nozzle and of changing the design flight Mach number were also investigated.

ENGINES, TURBOJET↗
NASA NTRS1961

Annular Internal-External-Expansion Rocket Nozzles for Large Booster Applications

For large-thrust booster applications, annular rocket nozzles employing both internal and external expansion are investigated. In these nozzles, free-stream air flows through the center as well as around the outside of the exiting jet. Flaps for deflecting the rocket exhaust are incorporated on the external-expansion surface for thrust-vector control. In order to define nozzle off-design performance, thrust vectoring effectiveness, and external stream effects, an experimental investigation was conducted on two annular nozzles with area ratios of 15 and 25 at Mach 0, 2, and 3 in the Lewis 10- by 10-foot wind tunnel. Air, pressurized to 600 pounds per square inch absolute, was used to simulate the exhaust flow. For a nozzle-pressure-ratio range of 40 to 1000, the ratio of actual to ideal thrust was essentially constant at 0.98 for both nozzles. Compared with conventional convergent-divergent configurations on hypothetical boost missions, the performance gains of the annular nozzle could yield significant orbital payload increases (possibly 8 to 17 percent). A single flap on the external-expansion surface of the area-ratio-25 annular nozzle produced a side force equal to 4 percent of the axial force with no measurable loss in axial thrust.

Connors, James F.↗
NASA NTRS1956

The Compressible Laminar Boundary Layer with Heat Transfer and Arbitrary Pressure Gradient

An approximate method for the calculation of the compressible laminar boundary layer with heat transfer and arbitrary pressure gradient, based on Thwaites' correlation concept, is presented. With the definition of dimensionless shear and heat-transfer parameters and an assumed correlation of these parameters in terms of a momentum parameter, a complete system of relations for calculating skin friction and heat transfer results. Knowledge of velocity or temperature profiles is not necessary in using this calculation method. When the method is applied to a convergent-divergent, axially symmetric rocket nozzle, it shows that high rates of heat transfer are obtained at the initial stagnation point and at the throat of the nozzle. Also indicated are negative displacement thicknesses in the convergent portion of the nozzle; these occur because of the high density within the lower portions of the cooled boundary layer. (author)

Cohen, Clarence B↗
NASA NTRS1959

Overexpanded Performance of Conical Nozzles with Area Ratios of 6 and 9 With and Without Supersonic External Flow

An investigation of the thrust characteristics and internal pressure distributions of two convergent-divergent 15 deg. half-angle exhaust nozzles having area ratios of 6 and 9 was made in the NASA Lewis 10- by 10-foot supersonic wind tunnel. The tests were conducted at free-stream Mach numbers of 0, 2.0, 2.5, 3.0, and 3.5 over a range of nozzle pressure ratios from 3 to 105. Attempts were made to induce separation of the overexpanded nozzle flow using secondary airflow and a wedge. Nozzle flow expansion under all free-stream conditions followed one-dimensional theory until separation from the nozzle wall occurred. In quiescent air the nozzle flow expanded to a pressure approximately one-half the base pressure before separation. When the nozzles were tested with supersonic external flow at the same effective pressure ratios, the nozzle flow separated with negligible expansion below the base pressure. The effect of a supersonic stream on internal nozzle flow separation characteristics was well defined only at a free-stream Mach number of 2.0. Thrust data at supersonic free-stream conditions indicate that only a small percentage of the ideal nozzle thrust will be available at nozzle pressure ratios below design. However, the overexpanded primary nozzle thrust loss was decreased by injecting large quantities of secondary air near the nozzle exit. In most cases no net gain in thrust resulted from secondary-air injection when the nozzle thrust was compared with the ideal thrust of both the primary and secondary airflows.

Musial, Norman T.↗
NASA NTRS1957

Survey of the Acoustic near Field of Three Nozzles at a Pressure Ratio of 30

The sound pressures radiating from the exhaust streams of two convergent-divergent and one convergent nozzle were measured. Exit diameters were 1.206 in. for the expanded nozzle and 0.625 in. for the convergent nozzle. The results are presented in a series of contour maps of overall and fine 1/3-octave-band sound pressures. The location of the source of the noise in each 1/3-octave band in the frequency range of 30 to 16,000 cps and the total power radiated were determined and compared with those of subsonic jets.

FLOW, JET-MIXING↗