SEARCH · Engineering Papers

Results for “COLOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Seed coat transcriptomic profiling of 5-593, a genotype important for genetic studies of seed coat color and patterning in common bean ( Phaseolus vulgaris L.)

Common bean (Phaseolus vulgaris L.) market classes have distinct seed coat colors, which are directly related to the diverse flavonoids found in the mature seed coat. To understand and elucidate the molecular mechanisms underlying the regulation of seed coat color, RNA-Seq data was collected from the black bean 5-593 and used for a differential gene expression and enrichment analysis from four different seed coat color development stages. 5-593 carries dominant alleles for 10 of the 11 major genes that control seed coat color and expression and has historically been used to develop introgression lines used for seed coat genetic analysis. Pairwise comparison among the four stages identified 6,294 differentially expressed genes (DEGs) varying from 508 to 5,780 DEGs depending on the compared stages. Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis revealed that phenylpropanoid biosynthesis, flavonoid biosynthesis, and plant hormone signal transduction comprised the principal pathways expressed during bean seed coat pigment development. Transcriptome analysis suggested that most structural genes for flavonoid biosynthesis and some potential regulatory genes were significantly differentially expressed. Further studies detected 29 DEGs as important candidate genes governing the key enzymatic flavonoid biosynthetic pathways for common bean seed coat color development. Additionally, four gene models, Pv5-593.02G016100, 593.02G078700, Pv5-593.02G090900, and Pv5-593.06G121300, encode MYB-like transcription factor family protein were identified as strong candidate regulatory genes in anthocyanin biosynthesis which could regulate the expression levels of some important structural genes in flavonoid biosynthesis pathway. These findings provide a framework to draw new insights into the molecular networks underlying common bean seed coat pigment development.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2025

Solving the strong CP problem with massless grand-color quarks

We propose a solution to the strong CP problem that specifically relies on massless quarks and has no light axion. The QCD color group SU(3) c is embedded into a larger, simple gauge group (grand-color) where one of the massless, colored fermions enjoys an anomalous chiral symmetry, rendering the strong CP phase unphysical. The grand-color gauge group G GC is Higgsed down to SU(3) c × ${G}_{c^{\prime }}$, after which ${G}_{c^{\prime }}$ eventually confines at a lower scale, spontaneously breaking the chiral symmetry and generating a real, positive mass to the massless, colored fermion. Since the chiral symmetry has a ${G}_{c^{\prime }}$ anomaly, there is no corresponding light Nambu-Goldstone boson. The anomalous chiral symmetry can be an accidental symmetry that arises from an exact discrete symmetry without introducing a domain wall problem. Potential experimental signals of our mechanism include vector-like quarks near the TeV scale, pseudo Nambu-Goldstone bosons below the 10 GeV scale, light dark matter decay, and primordial gravitational waves from the new strong dynamics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Breaking mirror twin color

We investigate simple extensions of the Mirror Twin Higgs model in which the twin color gauge symmetry and the discrete Z2 mirror symmetry are spontaneously broken. This is accomplished in a minimal way by introducing a single new colored triplet, sextet, or octet scalar field and its twin along with a suitable scalar potential. This spontaneous Z2 breaking allows for a phenomenologically viable alignment of the electroweak vacuum, and leads to dramatic differences between the visible and mirror sectors with regard to the residual gauge symmetries at low energies, color confinement scales, and particle spectra. In particular, several of our models feature a remnant SU(2) or SO(3) twin color gauge symmetry with a very low confinement scale in comparison to ΛQCD. Furthermore, couplings between the colored scalar and matter provide a new dynamical source of twin fermion masses, and due to the mirror symmetry, these lead to a variety of correlated visible sector effects that can be probed through precision measurements and collider searches.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

Color-kinematics dual representations of one-loop matrix elements in the open-superstring effective action

Abstract Theα ′ -expansion of string theory provides a rich set of higher-dimension operators, indexed byζvalues, which can be used to study color-kinematics duality and the double copy. These two powerful properties, actually first noticed in tree-level string amplitudes, simplify the construction of both gauge and gravity amplitudes. However, their applicability and limitations are not fully understood. We attempt to construct a set of color-kinematics dual numerators at one loop and four points for insertions of operator combinations corresponding to the lowest fourζ 2 -free operator insertions from the open superstring:ζ 3 ,ζ 5 ,$$ {\zeta}_3^2 $$ ζ 3 2 , andζ 7 . We succeed in finding a representation for the first three in terms of box, triangle, and bubble numerators. In the case ofζ 7 we find an obstruction to a fully color-dual representation related to the bubble-on-external-leg type diagrams. We discuss two paths around this obstruction, both of which signal an incompatability between color-kinematics duality and manifesting certain desired properties. Using the constructed color-dual numerators, we find two different Bern-Carrasco-Johansson double copies that produce candidate closed-string-insertion numerators. Both approaches to the double copy match the kinematics of the cuts, with relative normalization set by either summing over both double copies including degeneracy or by including an explicit prefactor on the double-copy numerator definitions.

Physics↗

DOE OSTI2023

CIEL ∗ Ch color map for visualization and analysis of sea ice motion

The International Commission on Illumination (CIE) designed its color space to be perceptually uniform so that a given numerical change in the color code corresponds to perceived change in color. This color encoding is demon- strated to be advantageous in scientific visualization and analysis of vector fields. The specific application is analysis of ice motion in the Arctic where patterns in smooth monthly-averaged ice motion are seen. Furthermore, fractures occurring in the ice cover result in discontinuities in the ice motion. This vector jump in displacement can also be visualized. We then analyze modeled and observed fractures through the use of a metric on the color space, and image amplitude and phase metrics. Amplitude and phase met- rics arise from image registration that is accomplished by sampling images using space filling curves, thus reducing the image registration problem to the more reliable functional alignment problem. We demonstrate this through an exploration of the metrics to compare model runs to an observed ice crack.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Finely tunable dynamical coloration using bicontinuous micrometer-domains

Nanostructures similar to those found in the vividly blue wings of Morpho butterflies and colorful photonic crystals enable structural color through constructive interference of light waves. Different from commonly studied structure-colored materials using periodic structures to manipulate optical properties, we report a previously unrecognized approach to precisely control the structural color and light transmission via a novel photonic colloidal gel without long-range order. Nanoparticles in this gel form micrometer-sized bicontinuous domains driven by the microphase separation of binary solvents. This approach enables dynamic coloration with a precise wavelength selectivity over a broad range of wavelengths extended well beyond the visible light that is not achievable with traditional methods. The dynamic wavelength selectivity is thermally tunable, reversible, and the material fabrication is easily scalable.

42 ENGINEERING↗

DOE OSTI2025

ZTF SN Ia DR2: Improved SN Ia colors through expanded dimensionality with SALT3+

Context. Type Ia supernovae (SNe Ia) are a key probe in modern cosmology, as they can be used to measure luminosity distances at gigaparsec scales. Models of their light curves are used to project heterogeneous observed data onto a common basis for analysis. Aims. The SALT model currently used for SN Ia cosmology describes SNe as having two sources of variability, accounted for by a color parameter c , and a “stretch” parameter x 1 . We extend the model to include an additional parameter we label x 2 , to investigate the cosmological impact of currently unaddressed light-curve variability. Methods. We constructed a new SALT model, that we dub “SALT3+”. This model was trained by an improved version of the SALTshaker code, using training data combining a selection of the second data release of cosmological SNe Ia from the Zwicky Transient Facility and the existing SALT3 training compilation. Results. We find additional, coherent variability in supernova light curves beyond SALT3. Most of this variation can be described as phase-dependent variation in g − r and r − i color curves, correlated with a boost in the height of the secondary maximum in i -band. These behaviors correlate with spectral differences, particularly in line velocity. We find that fits with the existing SALT3 model tend to address this excess variation with the color parameter, leading to less informative measurements of supernova color. We find that neglecting the new parameter in light-curve fits leads to a trend in Hubble residuals with x 2 of 0.039 ± 0.005 mag, representing a potential systematic uncertainty. However, we find no evidence of a bias in current cosmological measurements. Conclusions. We conclude that extended SN Ia light-curve models promise mild improvement in the accuracy of color measurements, and corresponding cosmological precision. However, models with more parameters are unlikely to substantially affect current cosmological results.

Kenworthy, W. D. (ORCID:0000000251535983)↗

DOE OSTI2021

Imaging pyrometry for most color cameras using a triple pass filter

A simple combination of the Planck blackbody emission law, optical filters, and digital image processing is demonstrated to enable most commercial color cameras (still and video) to be used as an imaging pyrometer for flames and explosions. The hardware and data processing described take advantage of the color filter array (CFA) that is deposited on the surface of the light sensor array present in most digital color cameras. In this work, a triple-pass optical filter incorporated into the camera lens allows light in three 10-nm wide bandpass regions to reach the CFA/light sensor array. These bandpass regions are centered over the maxima in the blue, green, and red transmission regions of the CFA, minimizing the spectral overlap of these regions normally present. A computer algorithm is used to retrieve the blue, green, and red image matrices from camera memory and correct for remaining spectral overlap. A second algorithm calibrates the corrected intensities to a gray body emitter of known temperature, producing a color intensity correction factor for the camera/filter system. The Wien approximation to the Planck blackbody emission law is used to construct temperature images from the three color (blue, green, red) matrices. A short pass filter set eliminates light of wavelengths longer than 750 nm, providing reasonable accuracy (±10%) for temperatures between 1200 and 6000 K. The effectiveness of this system is demonstrated by measuring the temperature of several systems for which the temperature is known.

47 OTHER INSTRUMENTATION↗

DOE OSTI2020

Color-neutral, semitransparent organic photovoltaics for power window applications

Semitransparent organic photovoltaic cells (ST-OPVs) are emerging as a solution for solar energy harvesting on building facades, rooftops, and windows. However, the trade-off between power-conversion efficiency (PCE) and the average photopic transmission (APT) in color-neutral devices limits their utility as attractive, power-generating windows. A color-neutral ST-OPV is demonstrated by using a transparent indium tin oxide (ITO) anode along with a narrow energy gap nonfullerene acceptor near-infrared (NIR) absorbing cell and outcoupling (OC) coatings on the exit surface. The device exhibits PCE = 8.1 ± 0.3% and APT = 43.3 ± 1.2% that combine to achieve a light-utilization efficiency of LUE = 3.5 ± 0.1%. Commission Internationale d’eclairage chromaticity coordinates of (0.38, 0.39), a color-rendering index of 86, and a correlated color temperature of 4,143 K are obtained for simulated AM1.5 illumination transmitted through the cell. Using an ultrathin metal anode in place of ITO, we demonstrate a slightly green-tinted ST-OPV with PCE = 10.8 ± 0.5% and APT = 45.7 ± 2.1% yielding LUE = 5.0 ± 0.3% These results indicate that ST-OPVs can combine both efficiency and color neutrality in a single device.

14 SOLAR ENERGY↗

DOE OSTI2021

Two-color x-ray free-electron laser by photocathode laser emittance spoiler

Multispectral x-ray pump-probe experiments call for synchronized two-color free-electron lasers (FEL). This mode often implies a laborious setup or an inefficient use of the undulator. We report on a simple and noninvasive approach tested at SwissFEL for a two-color x-ray delivering almost 60% of the pulse energy compared with a single color. In this new method, a ps UV pulse is overlapped to the photocathode drive laser increasing the beam emittance, which locally inhibits the FEL process. This scheme permits high-stability in energy and spectrum and the control of the two-color duration and intensity ratio. It enables shot-to-shot switching between one and two-color FEL and, since not associate to beam losses, it is compatible with high repetition-rate and high average-power FELs.

43 PARTICLE ACCELERATORS↗

DOE OSTI2022

Generation of Intense Low-Divergence Isolated Soft-X-Ray Attosecond Pulses in a Gas-Filled Waveguide Using Three-Color Synthesized Laser Pulses

Isolated attosecond pulses (IAPs) in the soft-x-ray (SXR) region have been successfully produced via high-order harmonic generation in a gas medium at several laboratories, but pulse energies are much lower compared to the IAPs in the extreme ultraviolet. Here, we show that in a gas-filled hollow waveguide, an efficient gating method using a few-cycle three-color synthesizer is able to generate stronger SXR IAPs. We show that an 104-as IAP in the SXR region (central energy of 210 eV) with a higher pulse energy (0.9 nJ) and a lower divergence (within 1.5 mrad) can be generated with a three-color laser beam for input pulse energy at 0.62 mJ, under the condition of optimal gas pressure and waveguide length. The enhancement of the IAP is attributed to favorable phase matching of SXR high harmonics caused by the evolution of the three-color waveform during its propagation in the waveguide, which can be understood by analyzing the time shift of the waveform due to the interplay of the waveguide mode, atomic dispersion, and plasma dispersion. We check that the gating method is quite robust with respect to the phase jitter in the waveform. The advantage of this method is further demonstrated by comparing the generation of SXR high harmonics and attosecond pulses with two other schemes: the three-color waveform in a gas cell and a previously optimized two-color waveform in a gas-filled waveguide.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2020

Group-III quantum defects in diamond are stable spin-1 color centers

Color centers in diamond have emerged as leading solid-state “artificial atoms” for a range of quantum technologies, from quantum sensing to quantum networks. Concerted research activities are now underway to identify new color centers that combine stable spin and optical properties of the nitrogen vacancy (NV – ) with the spectral stability of the silicon vacancy (SiV – ) centers in diamond, with recent research identifying other group-IV color centers with superior properties. In this paper, we investigate a class of diamond quantum emitters from first principles, the group-III color centers, which we show to be thermodynamically stable in a spin-1, electric-field-insensitive structure. Further, from ab initio electronic structure methods, we characterize the product Jahn-Teller (pJT) effect present in the excited-state manifold of these group-III color centers, where we capture symmetry-breaking distortions associated with strong electron-phonon coupling. These predictions can guide experimental identification of group-III vacancy centers and their use in applications in quantum information science and technology.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Berry Curvature and Spin-One Color Superconductivity

Here, we explore the interplay between Berry curvature and topological properties in single-flavor color superconductors, where quarks form spin-one Cooper pairs. By deriving a new relation, we connect the topological nodal structure of the gap function in momentum space to the (non-Abelian) Berry flux associated with paired quarks. This generalizes the early work by Li and Haldane [Phys. Rev. Lett. 120, 067003 (2018)] to systems with additional internal quantum numbers, such as color. In the ultrarelativistic limit, we uncover rich topological structures driven by the interplay of spin, chirality, and color. Specifically, we identify chirality-induced topological nodes in the transverse (opposite chirality pairing) polar and 𝐴 phases. In contrast, the color-spin-locking phase lacks these nodes due to a nontrivial color Berry flux, which in turn induces gapless excitations with total Berry monopole charges of ±3/2—differing from conventional Weyl fermions. Our findings can be potentially extended to other fermionic systems carrying additional internal degrees of freedom.

Berry curvature↗

DOE OSTI2020

Modeling and Investigations on Surface Colors of Wings on the Performance of Albatross-Inspired Mars Drones and Thermoelectric Generation Capabilities

Thermal effects of wing color for Albatross-inspired drones performing in the Martian atmosphere are investigated during the summer and winter seasons. This study focuses on two useful consequences of the thermal effects of wing color: the drag reduction and the thermoelectric generation of power. According to its color, each wing side has a certain temperature affecting the drag. Investigations of various configurations have shown that the thermal effect on the wing boundary layer skin drag is insignificant because of the low atmospheric pressure. However, the total drag varies as much as 12.8% between the highest performing wing color configuration and the lowest performing configuration. Additionally, the large temperature differences between the top and the bottom wing surfaces show great potential for thermoelectric power generation. The maximum temperature differences between the top and bottom surfaces for the summer and winter seasons are, respectively, 65 K and 30 K. The drag reduction and the power generation via thermoelectric generators both contribute to enhancing the endurance of drones. Future drone designs will benefit from increased endurance through optimizing the wing color configuration.

Rice, Devyn↗

DOE OSTI2025

Exploiting Trap Type and Color for Monitoring Macadamia Felted Coccid Acanthococcus ironsidei (Williams) and Associated Parasitic Wasps in Macadamia Orchards in Hawai’i

Acanthococcus ironsidei (Williams) (Hemiptera: Eriococcidae) is an invasive pest of macadamia, Macadamia integrifolia, in Hawai’i, causing death to macadamia trees and decreased nut productivity. Monitoring relies on wrapping double-sided sticky tapes over tree branches to trap dispersing crawlers (i.e., mobile immature stage), but this is tedious for growers, especially in large orchards. From September to November 2022 and December 2022 to February 2023, at two commercial macadamia orchards on Hawai’i Island, the use of colored sticky cards was assessed for improving the monitoring of A. ironsidei and to investigate the Hymenopteran parasitoid complex that inhabits macadamia canopies. At each study site, four different colored sticky cards (yellow, lime green, dark green, and white) were placed on the lower canopy of five trees, and on each tree, a transparent double-sided sticky tape was deployed. At bi-weekly intervals, the sticky cards were replaced and re-randomized on each tree, and the double-sided sticky tapes were replaced. The results showed that the sticky cards captured both A. ironsidei crawlers and (winged) male adults, while the double-sided sticky tapes captured only crawlers. The trap color did not have significant effects on the captures of A. ironsidei male adults at the sites, while the captures of crawlers on sticky cards were lowest on the dark green sticky traps at one site. The captures of A. ironsidei adult males on white sticky traps were generally correlated with the number of crawlers captured on the double-sided sticky tapes. The parasitoid complex captured had disparities in the attraction to color; however, the yellow, lime green and dark green colors were seemingly more effective for monitoring Encarsia lounsburyi (Berlese & Paoli), a reported parasitoid of A. ironsidei. These results have useful practical implications for improved monitoring of A. ironsidei crawlers, male adults and associated natural enemies.

Entomology↗

DOE OSTI2023

The Pantheon+ Analysis: Forward Modeling the Dust and Intrinsic Color Distributions of Type Ia Supernovae, and Quantifying Their Impact on Cosmological Inferences

Abstract Recent studies have shown that the observed color distributions of Type Ia supernovae (SNe Ia) can be well described by a combination of a dust distribution and an intrinsic color distribution. Using the Pantheon+ sample of 1701 SN Ia, we apply a new forward-modeling fitting method (Dust2Dust) to measure the parent dust and color distributions, including their dependence on host-galaxy mass. At each fit step, the SN Ia selection efficiency is determined from a large simulated sample that is reweighted to reflect the proposed distributions. We use five separate metrics to describe the goodness of fit: distribution of fitted light-curve color c , cosmological residual trends with c , cosmological residual scatter with c , fitted color–luminosity relationship β SALT2 , and intrinsic scatter σ int . We present the results and the uncertainty in 12-dimensional space. Furthermore, we measure that the uncertainty on this modeling propagates to an upper threshold uncertainty in the equation of state of dark energy w of 0.014(1) for the Pantheon+ cosmology analysis and contributes negligible uncertainty to the Hubble constant H 0 . The Dust2Dust code is made publicly available at https://github.com/djbrout/dustdriver .

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Two-color pyrometry based flame to fuel surface radiative heat flux diagnostic using flamelets

In this study, a non-intrusive two-color pyrometry based radiative heat flux diagnostic is presented that accounts for the self-absorption effects. This diagnostic relies on looking up the flame temperature and soot volume fraction using the ratio of color intensities obtained from digital cameras and numerical solutions of 1D steady-state diffusion flames. Virtual two color pyrometry of computed flame show a unique one-to-one mapping of strained flames with intensity ratio; thereby allowing flames to be indexed and creation of a two-color flamelet manifold (TCFM). The TCFM is a function of two variables; the ratio of red to green intensities (flame index) and physical distance to the stoichiometric surface defined using a level-set function. The developed diagnostic is used in upward flame spread experiments where an approximate flame hull reconstruction method is applied to provide the 3D level-set function and intensity ratio for use of TCFM to provide radiative absorption properties for 3D ray tracing. Accounting for self- absorption effects provide improved soot volume fraction estimates. In conclusion, the radiative heat flux estimates are found to be in very good agreement with literature and improved results are obtained near the flame base.

42 ENGINEERING↗

DOE OSTI2023

Fabrication of single color centers in sub-50 nm nanodiamonds using ion implantation

Diamond color centers have been widely studied in the field of quantum optics. The negatively charged silicon vacancy (SiV – ) center exhibits a narrow emission linewidth at the wavelength of 738 nm, a high Debye–Waller factor, and unique spin properties, making it a promising emitter for quantum information technologies, biological imaging, and sensing. In particular, nanodiamond (ND)-based SiV – centers can be heterogeneously integrated with plasmonic and photonic nanostructures and serve as in vivo biomarkers and intracellular thermometers. Out of all methods to produce NDs with SiV – centers, ion implantation offers the unique potential to create controllable numbers of color centers in preselected individual NDs. However, the formation of single color centers in NDs with this technique has not been realized. We report the creation of single SiV– centers featuring stable high-purity single-photon emission through Si implantation into NDs with an average size of ~20 nm. We observe room temperature emission, with zero-phonon line wavelengths in the range of 730–800 nm and linewidths below 10 nm. Our results offer new opportunities for the controlled production of group-IV diamond color centers with applications in quantum photonics, sensing, and biomedicine.

36 MATERIALS SCIENCE↗