Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COLLISIONAL PLASMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Terahertz generation by two cross focused laser beams in collisional plasmas

The role of two cross-focused spatial-Gaussian laser beams has been studied for the high power and efficient terahertz (THz) radiation generation in the collisional plasma. The nonlinear current at THz frequency arises on account of temperature dependent collision frequency of electrons with ions in the plasma and the presence of a static electric field (applied externally in the plasma) and density ripple. Optimisation of laser-plasma parameters gives the radiated THz power of the order of 0.23 MW.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Response to “Comment on ‘Propagation of surface waves on a semi-bounded quantum magnetized collisional plasma’” [Phys. Plasmas 23, 044701 (2016)]

We reply to the Comment of Moradi [Phys. Plasmas 23, 044701 (2016)] on our paper [Phys. Plasmas 20, 122106 (2013)]. It is shown that TM surface waves can propagate on the surface of a semi-bounded quantum magnetized collisional plasma in the Faraday configuration in the electrostatic limit. In addition, in the Faraday configuration, one can neglect the coupling of TM and TE modes in the two limiting cases of weak magnetic field (low cyclotron frequency) and strong magnetic field (high cyclotron frequency).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Properties of a warm plasma collisional sheath in an oblique magnetic field

The properties of a warm plasma collisional sheath in an oblique magnetic field and the associated sheath criterion are investigated with a two-fluid model. In the fluid framework, a sheath criterion including effects of the magnetic field and collision is established theoretically for a wide range of ion temperature. With the sheath criterion as the plasma-sheath boundary condition, different plasma parameters including potential, electron and ion densities, and ion velocity are calculated for various ion temperatures and ion thermal motions. It is shown that the properties of the sheath depend not only on the plasma balance equations but also on the sheath boundary conditions. In addition, effects of the directions and magnitudes of the magnetic field on the plasma sheath are also discussed under different ion temperatures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Potential around a dust grain in collisional plasma

The ion neutral collision can lead to interesting phenomena in dust charging, totally different from the expectations based on the traditional orbit motion limited theory. The potential around a dust grain is investigated for the collisional plasma considering the presence of ion neutral collisions. Fluid equations are solved for the one dimensional radial coordinate. It is observed that with the gradual increase in ion neutral collision, the potential structure around the dust grain changes its shape and is different from the usual Debye-Hückel potential. The shift however starts from a certain value of ion neutral collision and the electron-ion density varies accordingly. The potential variation is interesting and reconfirms the fact that there exists a region of attraction for negative charges. The collision modeling is done for the full range of plasma, i.e., considering the bulk and the sheath jointly. The potential variation with collision is also shown explicitly and the variation is found to cope up with the earlier observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evolution of the beam-width parameter of zeroth-order Bessel–Gaussian beams in collisional plasma with density ripple

In the present paper, we have investigated the self-focusing of zeroth-order Bessel–Gaussian beams in collisional plasma with density ripple. Based on Wentzel–Kramers–Brillouin and the paraxial ray approximations, the nonlinear differential equation governing the evolution of beam-width parameter is evaluated. The variation of beam-width parameter with propagation distance is examined for different values of ripple wave number and beam parameters. From our study, it is seen that stronger self-focusing is obtained when the density ripple is important. The results corresponding to Gaussian beams are deduced from this work as a particular case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ion drag force on a dust grain in a weakly ionized collisional plasma

The problem of calculating the ion drag force acting on a dust grain immersed in a weakly ionized collisional plasma is studied using an approach based on the direct numerical solution of the Vlasov-Bhatnagar-Gross-Krook kinetic equations. A uniform subthermal flow of argon plasma past a spherical dust grain is considered. The numerical computations are performed for a wide range of plasma pressures. On the basis of the obtained results, the effect of ion-neutral collisions on the ion drag force is analyzed in a wide range of ion collisionality. In the collisionless limit, our results are shown to be in good agreement with the results obtained by the binary collision approach. As the ion collisionality increases, the ion drag force is found to decrease sharply and even become negative, i.e., directed oppositely to the plasma flow. A qualitative explanation of this effect is presented and a comparison of our results with those obtained using the drift diffusion approach is discussed. The velocity dependence of the ion drag force in the highly collisional regime is examined. The relationship between the ion and the neutral drag forces in the highly collisional limit is analyzed and the possibility of a superfluid-like behavior of dust grains is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A multi-species 13-moment model for moderately collisional plasmas

Fluid-based models of collisional transport in multi-species plasmas have typically been applied to parameter regimes where a local thermal equilibrium is assumed. While this parameter regime is valid for low temperature and/or high density applications, it begins to fail as plasmas enter the collisionless regime and kinetic effects dominate the physics. A plasma model is presented that lays the foundation for extending the validity of the collisional fluid regime using an anisotropic 13-moment fluid model derived from the Pearson type-IV probability distribution. The model explicitly evolves the pressure tensor and heat flux vector along with the density and flow velocity to capture dynamics usually restricted to kinetic models. Each particle species is modeled individually and collectively coupled through electromagnetic and collisional interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic Reconnection in Strongly-Magnetized, Weakly-Collisional Plasmas: Onset, Turbulence, and Energy-Partition in 3D, Plasmoid-Dominated Regimes

This project is concerned with theoretical and numerical studies of magnetic reconnection. Key areas of focus are the reconnection onset (how reconnection gets started), energy partition (how the magnetic energy gets distributed during a reconnection event), and the effect of background turbulence on reconnection. We aim to shed light on these issues in kinetic plasmas (i.e., plasmas where the collisional mean free path is long compared to the length-scales of interest), with emphasis on 3D geometries.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dissipation measures in weakly collisional plasmas

ABSTRACT The physical foundations of the dissipation of energy and the associated heating in weakly collisional plasmas are poorly understood. Here, we compare and contrast several measures that have been used to characterize energy dissipation and kinetic-scale conversion in plasmas by means of a suite of kinetic numerical simulations describing both magnetic reconnection and decaying plasma turbulence. We adopt three different numerical codes that can also include interparticle collisions: the fully kinetic particle-in-cell vpic, the fully kinetic continuum Gkeyll, and the Eulerian Hybrid Vlasov–Maxwell (HVM) code. We differentiate between (i) four energy-based parameters, whose definition is related to energy transfer in a fluid description of a plasma, and (ii) four distribution function-based parameters, requiring knowledge of the particle velocity distribution function. There is an overall agreement between the dissipation measures obtained in the PIC and continuum reconnection simulations, with slight differences due to the presence/absence of secondary islands in the two simulations. There are also many qualitative similarities between the signatures in the reconnection simulations and the self-consistent current sheets that form in turbulence, although the latter exhibits significant variations compared to the reconnection results. All the parameters confirm that dissipation occurs close to regions of intense magnetic stresses, thus exhibiting local correlation. The distribution function-based measures show a broader width compared to energy-based proxies, suggesting that energy transfer is co-localized at coherent structures, but can affect the particle distribution function in wider regions. The effect of interparticle collisions on these parameters is finally discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Breakdown of the Brillouin limit and classical fluxes in rotating collisional plasmas

The classical collisionless analysis displaying the occurrence of slow and fast rigid body rotation modes in magnetized plasmas is extended to collisional discharges. Collisions speed up the fast mode, slow down the slow one, and break down the classical Brillouin limit. Rigid body rotation has a strong impact on transport, and a collisional radial transport regime, different from the classical Braginskii collisional flux, is identified and analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An extended magnetohydrodynamics model for relativistic weakly collisional plasmas

Black holes that accrete far below the Eddington limit are believed to accrete through a geometrically thick, optically thin, rotationally supported plasma that we will refer to as a radiatively inefficient accretion flow (RIAF). RIAFs are typically collisionless in the sense that the Coulomb mean free path is large compared to GM/c{sup 2}, and relativistically hot near the event horizon. In this paper we develop a phenomenological model for the plasma in RIAFs, motivated by the application to sources such as Sgr A* and M87. The model is derived using Israel–Stewart theory, which considers deviations up to second order from thermal equilibrium, but modified for a magnetized plasma. This leads to thermal conduction along magnetic field lines and a difference in pressure, parallel and perpendicular to the field lines (which is equivalent to anisotropic viscosity). In the non-relativistic limit, our model reduces to the widely used Braginskii theory of magnetized, weakly collisional plasmas. We compare our model to the existing literature on dissipative relativistic fluids, describe the linear theory of the plasma, and elucidate the physical meaning of the free parameters in the model. We also describe limits of the model when the conduction is saturated and when the viscosity implies a large pressure anisotropy. In future work, the formalism developed in this paper will be used in numerical models of RIAFs to assess the importance of non-ideal processes for the dynamics and radiative properties of slowly accreting black holes.

79 ASTRONOMY AND ASTROPHYSICS↗

Observation of shock-front separation in multi-ion-species collisional plasma shocks

We observe shock-front separation and species-dependent shock widths in multi-ion-species collisional plasma shocks, which are produced by obliquely merging plasma jets of a He/Ar mixture (97% He and 3% Ar by initial number density) on the plasma liner experiment. Visible plasma emission near the He-I 587.6-nm and Ar-II 476.5–514.5-nm lines is simultaneously recorded by splitting a single visible image of the shock into two different fast-framing cameras with different narrow bandpass filters (589 ± 5 nm for observing the He-I line and 500 ± 25 nm for the Ar-II lines). For conditions in these experiments (pre-shock ion and electron densities ≈5×10 14 cm –3 , ion and electron temperatures of ≈2.2 eV, and relative plasma-merging speed of 22 km/s), the observationally inferred magnitude of He/Ar shock-front separation and the shock widths themselves are <1 cm, which correspond to ~50 post-shock thermal ion–ion mean free paths. These experimental length scales are in reasonable qualitative and quantitative agreement with results from 1D multi-fluid simulations using the CHICAGO code. However, we note there are differences between the experimentally inferred and simulation-predicted ionization states and line emission intensities, particularly in the post-shock region. Overall, the experimental and simulation results are consistent with theoretical predictions that the lighter He ions diffuse farther ahead within the overall shock front than the heavier Ar ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

General Cause of Sheath Instability Identified for Low Collisionality Plasma in Devices with Secondary Electron Emission

A condition for sheath instability due to secondary electron emission (SEE) is derived for low collisionality plasmas. When the SEE coefficient of the electrons bordering the depleted loss cone in energy space exceeds unity, the sheath potential is unstable to a negative perturbation. This result explains three different instability phenomena observed in Hall thruster simulations including a newly found state with spontaneous ~20MHz oscillations. When instabilities occur, the SEE propagating between the walls becomes the dominant contribution to the particle flux, energy loss and axial transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extension of Landau-fluid closure to weakly collisional plasma regime

Both collisionless and collisional Landau fluid (LF) closure have been developed and implemented in two-fluid plasma simulation framework BOUT++, taking full advantage of the fast non-Fourier method (Dimits, 2014). The spectral range of good fit can be conveniently extended to larger domain by adding more Lorentzians. The scaling for upper limit of wavenumber resolved in collisionless LF operator and the fitting coefficients for the collisional LF operator, the later is extended to weakly collisional regime (ν$^{*}_{e}$ ~ 0.01), are presented in this paper. The flux limited expression q$^{FL}_{∥e}$ is reduced to free streaming expression q$^{FS}_{∥e}$ in collisionless limit and gives classical Spitzer–Härm result q$^{SH}_{∥e}$ in collisional limit as we expected. The collisional LF closure recovers the classical Spitzer–Härm result q$^{SH}_{∥e}$ in collisional limit and is same as the collisionless LF closure in collisionless limit. The test cases also obviously reflect the nonlocal effects from LF closures and responding to different boundary conditions in open surface region. Our report will make it more applicable and possible to include the Landau damping kinetic effect in the fluid simulation of tokamak plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fluctuation dynamo in a weakly collisional plasma

The turbulent amplification of cosmic magnetic fields depends upon the material properties of the host plasma. In many hot, dilute astrophysical systems, such as the intracluster medium (ICM) of galaxy clusters, the rarity of particle–particle collisions allows departures from local thermodynamic equilibrium. These departures – pressure anisotropies – exert anisotropic viscous stresses on the plasma motions that inhibit their ability to stretch magnetic-field lines. We present an extensive numerical study of the fluctuation dynamo in a weakly collisional plasma using magnetohydrodynamic (MHD) equations endowed with a field-parallel viscous (Braginskii) stress. When the stress is limited to values consistent with a pressure anisotropy regulated by firehose and mirror instabilities, the Braginskii-MHD dynamo largely resembles its MHD counterpart, particularly when the magnetic field is dynamically weak. If instead the parallel viscous stress is left unabated – a situation relevant to recent kinetic simulations of the fluctuation dynamo and, we argue, to the early stages of the dynamo in a magnetized ICM – the dynamo changes its character, amplifying the magnetic field while exhibiting many characteristics reminiscent of the saturated state of the large-Prandtl-number ( ${Pm}\gtrsim {1}$ ) MHD dynamo. We construct an analytic model for the Braginskii-MHD dynamo in this regime, which successfully matches simulated dynamo growth rates and magnetic-energy spectra. A prediction of this model, confirmed by our numerical simulations, is that a Braginskii-MHD plasma without pressure-anisotropy limiters will not support a dynamo if the ratio of perpendicular and parallel viscosities is too small. This ratio reflects the relative allowed rates of field-line stretching and mixing, the latter of which promotes resistive dissipation of the magnetic field. Finally, in all cases that do exhibit a viable dynamo, the generated magnetic field is organized into folds that persist into the saturated state and bias the chaotic flow to acquire a scale-dependent spectral anisotropy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron transport in a collisional plasma with multiple ion species in the presence of a magnetic field

The classical work of Braginskii [Zh. Eksp. Teor. Fiz. 33, 459 (1957)] published almost 65 years ago was the first to provide a complete, closed fluid description of a weakly coupled, fully ionized, collisional plasma immersed in a magnetic field. While this fact is not widely known or appreciated, the Braginskii expressions for the electron transport coefficients can under- or overestimate the said coefficients by up to a factor of two for the electron Hall parameter of order unity (with the Hall parameter being proportional to the electron gyro-frequency over the electron–ion collision frequency) and can provide incorrect Hall-parameter scalings for its large values. Starting with the work of Epperlein and Haines [Phys. Fluids 29, 1029 (1986)], several papers attempted to correct the Braginskii electron results with varying degrees of success. Herein, we present our own effort with a hope to finally put this problem to rest.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lagrangian density for collisional plasma

For the purpose of deriving appropriate Lagrangians for plasma equations that include effects of energy loss, the paper examines the inverse problem of the calculus of variations for systems of first- and second-order quasi-linear partial differential equations. This results in convenient forms of the sufficient conditions under which the given differential equations are Euler-Lagrange equations of a Lagrangian. These conditions are then applied to determine the necessary transformation that converts equations, apparently not already in it, into Euler-Lagrange form. The appropriate Lagrangian for a warm collisional plasma is obtained, and the Lagrangian is derived for a resistive transmission line.

Peng, Y.-K. M.↗