Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHROMIUM 52”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

49 records · Page 3

Performance and properties evolution of near-term accident tolerant fuel: Cr-doped UO 2

Chromium-doped UO 2 fuel has received significant interest due to the ability for chromium to produce pellets with large average grain size (>30 μm), which has shown to increase fission gas retention during operation. Sintering of chromium-doped UO 2 pellets was pursued with oxygen potential and sintering atmosphere controlled to tailor the final microstructure of the material. Chromium additions in this study ranged from 750 to 7800 ppm. Cr concentrations were studied pre and post sintering using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Effects of chromium content on lattice parameter and microstructure were examined with X-ray diffraction (XRD) and scanning electron microscopy (SEM). Contraction of the UO 2 lattice parameter was observed, as well as enlargement of grain size with increasing chromium content up to 4900 ppm Cr 2 O 3 . In addition, SEM indicated Cr incorporation within the matrix and the formation of chromium oxide precipitates throughout the microstructure at high Cr concentrations. Evaluation of thermophysical properties of Cr-doped UO 2 pellets were conducted up to 1200 °C to illustrate their evolution with increased dopant concentration and microstructural changes. The results show that grain size is maximized at 52 μm with Cr 2 O 3 concentration equal to 4900 ppm; however, grain size decreases at higher Cr 2 O 3 concentrations. No significant changes were observed in specific heat capacity, linear thermal expansion, and coefficient of thermal expansion compared to undoped UO 2 . The thermal conductivity also decreased through the incorporation of Cr 2 O 3 dopants above 750 ppm and is shown to be ~15 % lower than reported UO 2 values.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Materials Data on Cr2Cu3(OF)12 by Materials Project

CrF6CrCu3(O2F)6 crystallizes in the triclinic P-1 space group. The structure is three-dimensional and consists of one chromium hexafluoride molecule and one CrCu3(O2F)6 framework. In the CrCu3(O2F)6 framework, Cr is bonded to six F atoms to form CrF6 octahedra that share corners with six CuO4F2 octahedra. The corner-sharing octahedra tilt angles range from 33–52°. There are a spread of Cr–F bond distances ranging from 1.85–1.89 Å. There are three inequivalent Cu sites. In the first Cu site, Cu is bonded to four O and two equivalent F atoms to form CuO4F2 octahedra that share corners with two equivalent CrF6 octahedra. The corner-sharing octahedral tilt angles are 39°. There is two shorter (1.90 Å) and two longer (1.91 Å) Cu–O bond length. Both Cu–F bond lengths are 2.28 Å. In the second Cu site, Cu is bonded to four O and two equivalent F atoms to form CuO4F2 octahedra that share corners with two equivalent CrF6 octahedra. The corner-sharing octahedral tilt angles are 33°. All Cu–O bond lengths are 1.92 Å. Both Cu–F bond lengths are 2.22 Å. In the third Cu site, Cu is bonded to four O and two equivalent F atoms to form CuO4F2 octahedra that share corners with two equivalent CrF6 octahedra. The corner-sharing octahedral tilt angles are 52°. All Cu–O bond lengths are 1.90 Å. Both Cu–F bond lengths are 2.39 Å. There are six inequivalent O sites. In the first O site, O is bonded in a 2-coordinate geometry to one Cu and one O atom. The O–O bond length is 1.29 Å. In the second O site, O is bonded in a 2-coordinate geometry to one Cu and one O atom. In the third O site, O is bonded in a 2-coordinate geometry to one Cu and one O atom. The O–O bond length is 1.29 Å. In the fourth O site, O is bonded in a 2-coordinate geometry to one Cu and one O atom. In the fifth O site, O is bonded in a 2-coordinate geometry to one Cu and one O atom. The O–O bond length is 1.29 Å. In the sixth O site, O is bonded in a 2-coordinate geometry to one Cu and one O atom. There are three inequivalent F sites. In the first F site, F is bonded in a distorted bent 150 degrees geometry to one Cr and one Cu atom. In the second F site, F is bonded in a bent 150 degrees geometry to one Cr and one Cu atom. In the third F site, F is bonded in a distorted bent 120 degrees geometry to one Cr and one Cu atom.

36 MATERIALS SCIENCE↗

DISSOLUTION OF SURROGATE U-Zr FUEL USING ALNIFLEX CONDITIONS

Non-aluminum clad spent nuclear fuel (NASNF) stored in L Basin at the Savannah River Site (SRS) is widely varied in fuel composition, design, packaging, and physical condition. The complexity of the NASNF inventory presents significant challenges, and technology development is necessary for successful disposition. One such fuel in the inventory is metallic uranium-zirconium (U-Zr) alloy fuel, the focus of this study. Electrolytic or nitric acid only dissolution of metallic U-Zr alloy can form insoluble zirconium oxide, which results in up to 52% loss of U to insoluble solids, and can be subject to potentially uncontrolled oxidation reactions [1, 2]. The AlNiflex process was determined to be a viable dissolution flowsheet for the U-Zr alloy fuel. Under a narrow set of solution concentrations, a combination of hydrofluoric acid (HF), nitric acid (HNO3), aluminum nitrate (Al(NO3)3), and hexavalent chromium can safely dissolve U-Zr intermetallic alloys, keep Zr soluble, and not significantly corrode stainless steel (SS) vessels [3, 4.

Gogolski, Jarrod M. [Savannah River National Labor↗

Evaluation of coatings for cobalt- and nickel-base superalloys, volume 2

The final results of an oxidation-reduction rig evaluation of aluminide coatings are presented, as applied to 1N-100 and B1900 nickel-base and X-10 and WI-52 cobalt-base alloys. Burner rigs were used which operated on JP-5 fuel and air, producing a gas velocity of 0.85 (2000 to 2500 ft/sec) at the specimen's leading edge. One-hour heating cycles were used with three minutes of air blast cooling. Results of testing at temperatures ranging from T sub max of 1850 to 2050 F indicate that coated B1900 has the longest oxidation life at all temperatures, followed by IN-100X-40WI-52, based on a weight change criterion. Coatings on nickel-base alloys provided more than twice the life of coating on cobalt-base alloys at comparable temperatures. The coatings with higher aluminum content and comparable thickness had longer lives. Silicon appeared to be a beneficial additive in the nickel-base alloy coatings for long term, low temperature life, but not for short term, high temperature performance. Chromium was identified in all coatings. Extrapolating the life results obtained to 1600 F, all the selected coatings on the four alloys would be protective for at least 10,000 hours.

Moore, V. S.↗

Chromium Nucleosynthesis and Silicon–Carbon Shell Mergers in Massive Stars

In this work, we analyze the production of the element Cr in galactic chemical evolution (GCE) models using the NuGrid nucleosynthesis yields set. We show that the unusually large [Cr/Fe] abundance at [Fe/H] ≈ 0 reported by previous studies using those yields and predicted by our Milky Way model originates from the merging of convective Si-burning and C-burning shells in a 20 ${M}_{\odot }$ model at metallicity Z = 0.01, about an hour before the star explodes. This merger mixes the incomplete burning material in the Si shell, including 51 V and 52 Cr, out to the edge of the carbon/oxygen (CO) core. The adopted supernova model ejects the outer 2 ${M}_{\odot }$ of the CO core, which includes a significant fraction of the Cr-rich material. When including this 20 M⊙ model at Z = 0.01 in the yields interpolation scheme of our GCE model for stars between 15 and 25 ${M}_{\odot }$, we overestimate [Cr/Fe] by an order of magnitude at [Fe/H] ≈ 0 relative to observations in the Galactic disk. This raises a number of questions regarding the occurrence of Si–C shell mergers in nature, the accuracy of different simulation approaches, and the impact of such mergers on the presupernova structure and explosion dynamics. According to the conditions in this 1D stellar model, the substantial penetration of C-shell material into the Si shell could launch a convective–reactive global oscillation if a merger does take place. In any case, GCE provides stringent constraints on the outcome of this stellar evolution phase.

79 ASTRONOMY AND ASTROPHYSICS↗

High Temperature Fracture Characteristics of a Nanostructured Ferritic Alloy (NFA)

High temperature fracture behavior has been investigated for the nanostructured ferritic alloy 14YWT (SM10). The fracture toughness of the alloy was above 140 MPa m at low temperatures, room temperature (RT) and 200 C, but decreased to a low fracture toughness range of 52 82 MPa m at higher temperatures up to 700 C. This behavior was explained by the fractography results indicating that the unique nanostructure of 14YWT alloy produced shallow plasticity layers at high temperatures and a low-ductility grain boundary debonding occurred at 700 C.

36 MATERIALS SCIENCE↗

Engineering Database of Liquid Salt Thermophysical and Thermochemical Properties

The purpose of this report is to provide a review of thermodynamic and thermophysical properties of candidate molten salt coolants, which may be used as a primary coolant within a nuclear reactor or heat transport medium from the Next Generation Nuclear Plant (NGNP) to a processing plant, for example, a hydrogen-production plant. Thermodynamic properties of four types of molten salts, including LiF-BeF2 (67 and 33 mol%, respectively; also known as FLiBe), LiF-NaF-KF (46.5, 11.5, and 52 mol%, also known as FLiNaK), and KCl-MgCl2 (67 and 33 mol%), and sodium nitrate-sodium nitrite-potassium nitrate (NaNO3–NaNO2–KNO3, (7-49-44 or 7-40-53 mol%) have been investigated. Limitations of existing correlations to predict density, viscosity, specific heat capacity, surface tension, and thermal conductivity, were identified. The impact of thermodynamic properties on the heat transfer, especially Nusselt number was also discussed. Stability of the molten salts with structural alloys and their compatibility with the structural alloys was studied. Nickel and alloys with dense Ni coatings are effectively inert to corrosion in fluorides but not so in chlorides. Of the chromium containing alloys, Hastelloy N appears to have the best corrosion resistance in fluorides, while Haynes 230 was most resistant in chloride. In general, alloys with increasing carbon and chromium content are increasingly subject to corrosion by the fluoride salts FLiBe and FLiNaK, due to attack and dissolution of the intergranular chromium carbide. Future research to obtain needed information was identified.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Engineering Database of Liquid Salt Thermophysical

The purpose of this report is to provide a review of thermophysical properties and thermochemical characteristics of candidate molten salt coolants, which may be used as a primary coolant within a nuclear reactor or heat transport medium from the Very High Temperature Reactor (VHTR) to a processing plant; for example, a hydrogen-production plant. Thermodynamic properties of four types of molten salts, including LiF-BeF 2 (67 and 33 mol%, respectively; also known as FLiBe), LiF-NaF-KF (46.5, 11.5, and 52 mol%, also known as FLiNaK), and KCl-MgCl 2 (67 and 33 mol%), and sodium nitrate-sodium nitrite-potassium nitrate (NaNO 3 –NaNO 2 –KNO 3 , 7-49-44 mol%, also known as Hitec® salt) have been investigated. Limitations of existing correlations to predict density, viscosity, specific heat capacity, surface tension, and thermal conductivity were identified. The impact of thermodynamic properties on the heat transfer, especially the Nusselt number, was also discussed. Stability of the molten salts with structural alloys and their compatibility with the structural alloys was studied. Nickel and high temperature alloys with dense Ni coatings are effectively inert to corrosion in fluorides, but not so in chlorides. Of the chromium containing alloys, Hastelloy N appears to have the best corrosion resistance in fluorides, while Haynes 230 was the most resistant in chloride. In general, alloys with increasing carbon and chromium content are increasingly subject to corrosion by the fluoride salts FLiBe and FLiNaK due to attack and dissolution of the intergranular chromium carbide. Future research to obtain needed information was identified.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pacific Northwest National Laboratory Investigation of the Stress Corrosion Cracking in Nickel-Base Alloys (Volume 2)

The objective of this program is to evaluate the primary water stress corrosion cracking (PWSCC) susceptibility of high chromium alloy 690 and its weld metals, establish quantitative measurements of crack-growth rates and determine relationships among cracking susceptibility, environmental conditions and metallurgical characteristics. Stress-corrosion, crack-growth rates have been determined for 12 alloy 690 specimens, 11 alloy 152/52/52M weld metal specimens, 4 alloy 52M/182 overlay specimens and 2 alloy 52M/82 inlay specimens in simulated PWR primary water environments. The alloy 690 test materials included three different heats of extruded control-rod-drive mechanism (CRDM) tubing with variations in the initial material condition and degree of cold work for one heat. Two cold-rolled (CR) alloy 690 plate heats were also obtained and evaluated enabling comparisons to the CR CRDM materials. Weld metal, overlay and inlay specimens were machined from industry mock ups to provide plant-representative materials for testing. Specimens have been tested for one alloy 152 weld, two alloy 52 welds and three alloy 52M welds. The overlay and inlay specimens were prepared to propagate stress-corrosion cracks from the alloy 182 or 82 material into the more resistant alloy 52M. In all cases, crack extension was monitored in situ by direct current potential drop (DCPD) with length resolution of about +1 µm making it possible to measure extremely low growth rates approaching 5x10 -10 mm/s. Most SCC tests were performed at 325-360°C with hydrogen concentrations from 11-29 cc/kg; however, environmental conditions were modified during a few experiments to evaluate the influence of temperature, water chemistry or electrochemical potential on propagation rates. In addition, low-temperature (~50°C) cracking behavior was examined for selected alloy 690 and weld metal specimens. Extensive characterizations have been performed on material microstructures and stress-corrosion cracks by optical and electron microscopy techniques and linked to crack-growth test results to help define material and environmental parameters controlling SCC susceptibility.

Bruemmer, Stephen M.↗

Nanocrystalline MgCr{sub x}Al{sub 2-x}O{sub 4}: Facile synthesis and thermal dependency of photoluminescence

Highlights: • Red emitting MgCr{sub x}Al{sub 2-x}O{sub 4} Hexagonal sheet like nanoparticles synthesized. • Annealing improved crystallinity and material turned pink at 1200 °C. • The R-line was intense but sidebands are less pronounced than in ZnAl{sub 2}O{sub 4} host. • High Dq/B confirm strong field relating PL with spin-parity forbidden transitions. • The lifetimes ranged between 20 and 24 ms much higher than reports. - Abstract: MgCr{sub x}Al{sub 2-x}O{sub 4} nanoparticles were synthesized by facile co-precipitation method. The x = 0.02 sample showed intense emission and considered for studying the effect of annealing temperature (500–1200 °C) on the structural and optical properties. On annealing, crystallinity improved and the material gradually turned pink at 1200 °C. Hexagonal sheet-like nanoparticles (∼52 nm) were observed by HRTEM and the lattice fringes suggested their single crystalline nature. Excitation spectra showed two peaks at 546 and 419 nm where the latter was asymmetric, attributable to the trigonal distortion. The photoluminescence consisted of intense zero-phonon line and associated multi-phonon side bands, whose intensities increased with annealing. Higher Dq/B (3.5), confirmed strong crystal field for Cr{sup 3+}, suggesting that the photoluminescence emission could be associated with spin-parity forbidden transitions. The emission lifetimes (λ{sub em} = 688 nm) ranged between ∼20 and 24 ms. Other oxide nanoparticles suitable for phosphors, biomarkers, etc. can be conveniently synthesized similarly.

36 MATERIALS SCIENCE↗

Shell model study of single-particle and collective structure in neutron-rich Cr isotopes

The structure of neutron-rich Cr isotopes is systematically investigated by using the spherical shell model. The calculations reproduce well the known energy levels for the even-even {sup 52-62}Cr and odd-mass {sup 53-59}Cr nuclei, and predict a lowering of excitation energies around neutron number N=40. The calculated B(E2;2{sub 1}{sup +}{yields}0{sub 1}{sup +}) systematics shows a pronounced collectivity around N=40; a similar characteristic behavior has been suggested for Zn and Ge isotopes. Causes for the sudden drop of the 9/2{sub 1}{sup +} energy in {sup 59}Cr and the appearance of very low 0{sub 2}{sup +} states around N=40 are discussed. We also predict a new band with strong collectivity built on the 0{sub 2}{sup +} state in the N=40 isotope {sup 64}Cr.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Giant magnetocaloric effect and temperature induced magnetization jump in GdCrO{sub 3} single crystal

We report on a systematic study of the single-crystal GdCrO{sub 3}, which shows various novel magnetic features, such as temperature-induced magnetization reversal (TMR), temperature-induced magnetization jump (TMJ), spin reorientation, and giant magnetocaloric effect (MCE). In the field-cooled cooling process with modest magnetic field along the c axis, GdCrO{sub 3} first shows a TMR at T{sub comp}∼120−130 K and then an abrupt TMJ with a sign change of magnetization at T{sub jump}∼52−120 K, and finally a spin reorientation at T{sub SR}∼4−7 K. Interestingly, the remarkable TMJ behavior, which was not reported ever before, persists at higher fields up to 10 kOe even when TMR disappears. In addition, giant MCE with the maximum value of magnetic entropy change reaching ∼31.6 J/kg K for a field change of 44 kOe was also observed in GdCrO{sub 3} single crystal, suggesting it could be a potential material for low-T magnetic refrigeration. A possible mechanism for these peculiar magnetic behaviors is discussed based on the various competing magnetic interactions between the 3d electrons of Cr{sup 3+} ions and 4f electrons of Gd{sup 3+} ions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A SPITZER SPACE TELESCOPE FAR-INFRARED SPECTRAL ATLAS OF COMPACT SOURCES IN THE MAGELLANIC CLOUDS. I. THE LARGE MAGELLANIC CLOUD

We present far-infrared spectra, {lambda} = 52-93 {mu}m, obtained with the Spitzer Space Telescope in the spectral energy distribution mode of its MIPS instrument, of a representative sample of the most luminous compact far-infrared sources in the Large Magellanic Cloud (LMC). These include carbon stars, OH/IR asymptotic giant branch (AGB) stars, post-AGB objects and planetary nebulae, the R CrB-type star HV 2671, the OH/IR red supergiants (RSGs) WOH G064 and IRAS 05280 - 6910, the three B[e] stars IRAS 04530 - 6916, R 66 and R 126, the Wolf-Rayet star Brey 3a, the luminous blue variable (LBV) R 71, the supernova remnant N 49, a large number of young stellar objects (YSOs), compact H II regions and molecular cores, and a background galaxy at a redshift z {approx_equal} 0.175. We use the spectra to constrain the presence and temperature of cold dust and the excitation conditions and shocks within the neutral and ionized gas, in the circumstellar environments and interfaces with the surrounding interstellar medium (ISM). First, we introduce a spectral classification scheme. Then, we measure line strengths, dust temperatures, and IR luminosities. Objects associated with star formation are readily distinguished from evolved stars by their cold dust and/or fine-structure lines. Evolved stars, including the LBV R 71, lack cold dust except in some cases where we argue that this is swept-up ISM. This leads to an estimate of the duration of the prolific dust-producing phase ('superwind') of several thousand years for both RSGs and massive AGB stars, with a similar fractional mass loss experienced despite the different masses. We tentatively detect line emission from neutral oxygen in the extreme RSG WOH G064, which suggests a large dust-free cavity with implications for wind driving. In N 49, the shock between the supernova ejecta and ISM is revealed in spectacular fashion by its strong [O I] {lambda}63 {mu}m emission and possibly water vapor; we estimate that 0.2 M {sub sun} of ISM dust was swept up. On the other hand, some of the compact H II regions display pronounced [O III] {lambda}88 {mu}m emission. The efficiency of photoelectric heating in the interfaces of ionized gas and molecular clouds is estimated at 0.1%-0.3%. We confirm earlier indications of a low nitrogen content in the LMC. Evidence for solid state emission features is found in both young and evolved objects, but the carriers of these features remain elusive; some of the YSOs are found to contain crystalline water ice. The spectra constitute a valuable resource for the planning and interpretation of observations with the Herschel Space Observatory and the Stratospheric Observatory For Infrared Astronomy.

79 ASTRONOMY AND ASTROPHYSICS↗