Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CEMENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Ettringite-Related Dimensional Stability of CO 2 -Cured Portland Cement Mortars

Carbonation curing, where cement is cured in a CO 2 -rich environment, is an emerging technology in the precast industry that promotes CO 2 sequestration in construction materials. It demonstrates good promise for enhancing material strength development, chemical resistance and manufacturing sustainability. A critically important but little studied aspect of carbonation curing is the dimensional stability of the cured materials, which poses a significant impact on longevity of cement-based materials and structures. In this study, we propose to use carbonation curing to substitute the conventional energy-intensive steam curing and time-consuming moisture curing, and examine the dimensional stability of Portland cement mortars manufactured by different curing approaches. The common pathology in precast concrete that potentially creates undesirable expansions, known as Delayed Ettringite Formation (DEF), is particularly investigated. Four curing approaches were examined including moist, steam (maximum temperature at 85°C to purposefully induce DEF), combined steam-carbonation, and carbonation curing in which steam curing was used to verify favorable cement chemistry for DEF and to indicate DEF onset timing. It was found that, among the four curing approaches designed in this study, the carbonation-cured mortars demonstrated the lowest expansion (~0%) whereas the steam-cured mortars showed the highest (>0.6%) after 500 days of storage in saturated limewater. Mortar expansion after the combined steam-carbonation curing (~0.1%) was lower than that of steam curing, but remained higher with respect to the moisture-cured reference. Here, the mineral ettringite was detected at 500 days after all curing approaches. However, larger ettringite crystal size (5-10 μm) with greater dispersion was observed via scanning electron microscopy after steam curing in reference to carbonation curing (< 5 μm). Additionally, the calcium carbonate precipitated by CO 2 carbonation was found to participate in the post-carbonation hydration to promote formation of monocarboaluminate and hemicarboaluminate, which stabilize ettringite and potentially lead to a secondary densification of the mortar microstructure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature dependence of viscoelastic Poisson’s ratio of cement mortar

Abstract Concrete creep research has focused primarily on uniaxial response. However, biaxially prestressed concrete structures are common, resulting in a multiaxial stress state that can complicate the behavior of a viscoelastic material like concrete. Significant creep strains may be induced in directions transverse to each principle stress due to Poisson’s effect. Past research is unclear regarding the viscoelastic or viscoplastic properties of concrete outside of uniaxial response. It has been reported in separate studies that concrete viscoelastic/viscoplastic Poisson’s ratio (VPR) is an increasing, decreasing and constant function with time, with all reported measurements performed at room temperature. In this paper, the 3D basic creep response of mature cement mortar is examined using a confined compression experiment that allows direct determination of the full stress and infinitesimal strain tensors in a single test, which enables the determination of VPR under a multiaxial stress state. For this purpose, a unique, miniature version of the standardized concrete creep frame is designed that is amenable to placing in climate chambers and temperature ovens. The experimental results indicate that the VPR of sealed, mature cement mortar is nearly constant and equal to the elastic at room temperature, while the VPR gradually increases with time when measured at 60 °C.

Construction & Building Technology↗

Increasing Energy Efficiency and Reducing Emissions from China's Cement Kilns. Audit Report of Two Cement Plants in Shandong Province, China

The study documented in this report was initiated in order to conduct an energy assessment and to identify the relationship between combustion issues and emissions from cement kilns. A new suspension preheater/precalciner (NSP) rotary cement kiln at one cement manufacturing facility (referred to as Shui Ni 1 in this report) and a vertical shaft kiln (VSK) at another cement manufacturing facility (referred to as Shui Ni 2 in this report), which are both in Shandong Province, were selected to conduct the energy and emission assessments through collection of data. Based on analysis of the data collected during this assessment, several actions are suggested that could lead to reduction in coal use and reduction in emission of gaseous pollutants from the system.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Hydration kinetics of cements by Time-Domain Nuclear Magnetic Resonance: Application to Portland-cement-derived endodontic pastes

Time-Domain Nuclear Magnetic Resonance (TD-NMR) of {sup 1}H nuclei is used to monitor the maturation up to 30 days of three different endodontic cement pastes. The 'Solid-liquid' separation of the NMR signals and quasi-continuous distributions of relaxation times allow one to follow the formation of chemical compounds and the build-up of the nano- and subnano-structured C-S-H gel. {sup 1}H populations, distinguished by their different mobilities, can be identified and assigned to water confined within the pores of the C-S-H gel, to crystallization water and Portlandite, and to hydroxyl groups. Changes of the TD-NMR parameters during hydration are in agreement with the expected effects of the different additives, which, as it is known, can substantially modify the rate of reactions and the properties of cementitious pastes. Endodontic cements are suitable systems to check the ability of this non-destructive technique to give insight into the complex hydration process of real cement pastes.

36 MATERIALS SCIENCE↗

Sorption kinetics of superabsorbent polymers (SAPs) in fresh Portland cement-based pastes visualized and quantified by neutron radiography and correlated to the progress of cement hydration

Water sorption of two superabsorbent polymers in cement-based pastes has been characterized by neutron radiography. Cement pastes with W/C of 0.25 and 0.50 and one additionally containing silica fume (W/C = 0.42) were investigated. The SAPs differed in their inherent sorption kinetics in extracted cement pore solution (SAP 1: self-releasing; SAP 2: retentive). Desorption from SAP 1 started very early after paste preparation. Hence, its individual non-retentiveness governs its behavior only. SAP 2 released water into all matrices, but its kinetics were different. In the paste with the highest W/C, some moderate water release was recorded from the beginning. In the other two pastes, SAP 2 retained its stored liquid during the dormant period, i.e., up to the percolation threshold. Intense desorption then set in and continued throughout the acceleration period. These findings explain the pronouncedly higher efficiency of SAP 2 as internal curing admixture as compared to SAP 1.

36 MATERIALS SCIENCE↗

Influence of curing temperature on belite cement hydration: A comparative study with Portland cement

Belite cements (BCs) could be a more sustainable binder than Portland cements (PCs) but adequate knowledge of the hydration features has still to be built. In particular, the mild curing hydration temperature effects have been extensively studied for PCs but not for BCs. This research was triggered by a previous work reporting improved mechanical strengths of BCs at higher curing temperatures. Here, we report the hydration characteristics of a BC at 20, 40 and 60 °C and compared to those of a typical PC. We have corroborated previous findings and used a multi-technique approach including Rietveld phase analysis, thermal analysis, calorimetry, silicon MAS-NMR, mercury intrusion porosimetry and chiefly synchrotron X-ray microtomography, to thoroughly understand the different behavior. In a nutshell, the improved mechanical performances at mild curing temperatures for BCs are mainly due to a much larger belite degree of reaction, with lower porosity coarsening of belite cements also playing a role.

36 MATERIALS SCIENCE↗

Impact of cement composition, brine concentration, diffusion rate, reaction rate and boundary condition on self-sealing predictions for cement-CO 2 systems

Geological CO 2 storage (GCS) plays an important role in curbing CO 2 emissions by reducing the carbon footprint of difficult to decarbonize operations and achieve negative CO 2 emissions through activities like Bioenergy with Carbon Capture and Storage (BECCS) and Direct Air Carbon Capture and Storage (DACCS). Leakage of CO 2 through wells is an important concern when it comes to deployment of large-scale GCS. Existing wells in sites that are otherwise suitable for GCS can act as conduits for stored CO 2 to escape the reservoir. There is broad consensus that the main risk of leakage through wellbores is via fractures/damaged pathways. The results from several studies evaluating the permeability evolution of cement fractures in wells upon leakage of CO 2 agree that smaller fracture apertures, slower brine velocities and higher brine residence times promote self-sealing of fractures by mineral precipitation. Quantitatively, however, the differences in sealing conditions are significant and are typically attributed to differences in experimental conditions or model assumptions. Here we examine the sensitivity of our model, describing CO 2 leakage through wellbores, to cement composition, brine concentration, diffusion rates, and reaction rates. We also evaluate the impact of the boundary condition to allow comparisons between observations from experiments performed at constant flow rate and model predictions made at constant pressure conditions. Our results show that diffusion and reactions rates have the most impact on the self-sealing criteria for cement-CO 2 systems. In addition, conditions associated with self-sealing of fractures at constant flow rate require longer fractures, smaller fracture apertures, and slower velocities than under constant pressure.

58 GEOSCIENCES↗

Foamed Cement Interactions with CO 2

Geologic carbon storage (GCS) is a potentially viable strategy to reduce greenhouse emissions. Understanding the risks to engineered and geologic structures associated with GCS is an important first step towards developing practices for safe and effective storage. The widespread utilization of foamed cement in wells may mean that carbon dioxide (CO 2 )/brine/foamed cement reactions may occur within these GCS sites. Characterizing the difference in alteration rates as well as the physical and mechanical impact of CO 2 /brine/foamed cement is an important preliminary step to ensuring offshore and onshore GCS is a prudent anthropogenic CO 2 mitigation choice.

36 MATERIALS SCIENCE↗

Reduction of water content in calcium aluminate cement with/out phosphate modification for alternative cementation technique

Cementation of the secondary aqueous wastes from TEPCO Fukushima Daiichi Nuclear Power Plant is challenging due to the significant strontium content and radioactivity, leading to a potential risk of hydrogen gas generation via radiolysis of water content. The present study investigates the reduction of water content in calcium aluminate cement (CAC) with/out phosphate modification by a heat-treatment during the solidification. The reduction of water in the CAC was found restricted by the rapid formation of crystalline hydration phases, whereas the phosphate-modified system allowed the gradual reduction of water, achieving the reduction of 60% water content at 95 °C. Curing at 60–95 °C also eliminated the significant cracks found at 35 °C in the phosphate system. The possible difference in the amorphous products, NaCaPO{sub 4}·nH{sub 2}O type at 35°C and Ca(HPO{sub 4})·xH{sub 2}O type at 60–95 °C, may have contributed to the improvement in the microstructure together with the change in the pore size distribution.

36 MATERIALS SCIENCE↗

Percutaneous Vertebroplasty and Bone Cement Leakage: Clinical Experience with a New High-Viscosity Bone Cement and Delivery System for Vertebral Augmentation in Benign and Malignant Compression Fractures

The aim of this study was to assess the feasibility of and venous leakage reduction in percutaneous vertebroplasty (PV) using a new high-viscosity bone cement (PMMA). PV has been used effectively for pain relief in osteoporotic and malignant vertebral fractures. Cement extrusion is a common problem and can lead to complications. Sixty patients (52 female; mean age, 72.2 {+-} 7.2) suffering from osteoporosis (46), malignancy (12), and angiomas (2), divided into two groups (A and B), underwent PV on 190 vertebrae (86 dorsal, 104 lumbar). In Group A, PV with high-viscosity PMMA (Confidence, Disc-O-Tech, Israel) was used. This PMMA was injected by a proprietary delivery system, a hydraulic saline-filled screw injector. In Group B, a standard low-viscosity PMMA was used. Postprocedural CT was carried out to detect PMMA leakages and complications. Fisher's exact test and Wilcoxon rank test were used to assess significant differences (p < 0.05) in leakages and to evaluate the clinical outcome. PV was feasible, achieving good clinical outcome (p < 0.0001) without major complications. In Group A, postprocedural CT showed an asymptomatic leak in the venous structures of 8 of 98 (8.2%) treated vertebrae; a discoidal leak occurred in 6 of 98 (6.1%). In Group B, a venous leak was seen in 38 of 92 (41.3%) and a discoidal leak in 12 of 92 (13.0%). Reduction of venous leak obtained by high-viscosity PMMA was highly significant (p < 0.0001), whereas this result was not significant (p = 0.14) related to the disc. The high-viscosity PMMA system is safe and effective for clinical use, allowing a significant reduction of extravasation rate and, thus, leakage-related complications.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Direct in-situ observation of early age void evolution in sustainable cement paste containing fly ash or limestone

This paper uses fast X-ray Computed Tomography (fCT) to study the change in air-filled voids during hydration of portland cement pastes of different water to cement ratios and with fly ash and limestone additives between 30 min and 12 h of hydration with deionized and de-aired water. For the deionized samples, the total volume of the air-filled voids increased during the induction period and decreased as the acceleration period began and finally stayed constant. The samples with 20% replacement of fly ash and 20% replacement of limestone showed the same trends as the OPC samples but with a reduction in the observed air-filled void formation. The air-filled void distribution in these samples changed from a limited number of large voids at the beginning of the measurements to a system with a significantly greater number of uniformly distributed smaller voids. The changes in the air-filled voids were not significant in pastes made with 50% fly ash or with de-aired water in the same testing condition. This might be explained by differences in pore solution chemistry and a reduced amount of dissolved air in the mixing water. A mechanism is proposed for a change in ionic concentration in solution to cause release of the dissolved air within the mixing water.

Cement hydration↗

Optimal Pre-hydration Age for CO 2 Sequestration through Portland Cement Carbonation

An emerging technology of CO 2 sequestration in Portland cement (PC) is through accelerated carbonation, where PC is intentionally carbonated at early hydration age and reinitiates long-term hydration upon completion of carbonation. However, the current literature has overlooked a fact that different PC hydration ages prior to carbonation (pre-hydration) could lead to distinct carbonation efficiencies and subsequent hydration behaviors (post-hydration). Here, we examine the effects of length of pre-hydration period on CO 2 uptake and on the hydration extent and final strength at 28 days. The CO 2 and H 2 O profiles in the carbonated PC were examined with thermogravimetric analysis/derivative thermogravimetric analysis. The pre-hydration path was traced with isothermal calorimetry. Experimental results suggested that extension of pre-hydration decreased CO 2 uptake, but enhanced the extent of PC hydration at 28 days. It was found that a pre-hydration beyond the late deceleration period of PC hydration (where heat generation is slowing down) led to a higher hydrate content of cement paste, hence forming a higher compressive strength of mortar compared to the noncarbonated benchmarks at 28 days. The lesser carbonation-induced water loss and the nucleation seeding enabled by calcium carbonate are likely responsible for this effect. Furthermore, the finding reported here should be useful for fine tuning PC carbonation process for CO 2 sequestration in concrete.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Importance of Vane Configuration on Yield Stress Measurements of Cement Slurry

Vane methods combined with direct shear tests are widely applied to measure the yield stress $τ_0$ in concentrated suspensions such as cement slurries. This report reviews three different vanes with different shapes and sizes, and examines the relationship between the yield stress versus the torque and the shear rate versus the angular velocity. This research shows that vanes with conical shapes or reduced height/diameter ratio $(H/D)$ result in larger yield stress values.

36 MATERIALS SCIENCE↗

Effects of Cement Changes and Aggregate System on Mechanical Properties of Concrete

In this paper, mechanical properties of concrete mixtures containing different cementitious combinations and two aggregate systems were investigated under plastic and drying conditions. Emphasis was laid on durability and shrinkage of concrete. Life Cycle Analysis was also conducted by using Green Concrete LCA Webtool. Results indicated that the presence of larger aggregate sizes tend to enhance durability of concrete. The presence of nanosilica also imparted superior mechanical properties to concrete. A cementitious combination containing Portland Limestone Cement and fly ash with larger aggregate sizes emerged as a better performing mixture in terms of mechanical properties and with minimum environmental impact.

36 MATERIALS SCIENCE↗