Engineering PapersSearch

SEARCH · Engineering Papers

Results for “CASSCF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Activation of methane by U + studied by guided ion beam tandem mass spectrometry and quantum chemistry

Reaction pathways of all products formed in the U + + CH 4 (CD 4 ) reaction were explored as a function of kinetic energy using guided ion beam tandem mass spectrometry and quantum chemical calculations. UH + , UC + , UCH + , UCH 2 + , and UCH 3 + (and their perdeuterated analogues) are formed in endothermic reactions. In both systems, the UCH 2 + (UCD 2 + ) dehydrogenated product was the dominant product in the low-energy region, whereas the UH + (UD + ) hydride product became predominant at high energies. The kinetic energy behavior of the various products is consistent with a common intermediate of H–U + –CH 3 (D–U + –CD 3 ). Here, the kinetic energy dependence of all product cross sections was modeled to obtain experimental bond dissociation energies at 0 K (in eV): D 0 (U + –H) = 2.42 ± 0.10, D 0 (U + –C) = 3.95 ± 0.12, D 0 (U + –CH) = 4.91 ± 0.09, D 0 (U + –CH 2 ) = 4.11 ± 0.04, and D 0 (U + –CH 3 ) = 2.41 ± 0.09. Quantum chemical calculations using the UCCSD(T) and UB3LYP approaches with the cc-pwCVXZ-PP basis set with MDF-60 pseudopotential for U + and the aug-cc-pCVXZ and aug-cc-pVXZ (X = T, Q) basis set for carbon and hydrogen, respectively, validate the experimental bond dissociation energies and outline the potential energy surface for all reactions observed. In addition, spin–orbit corrections of the bond energies for all products were calculated at a CASSCF-CASPT2-RASSI level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH

Comment on ‘Resonant inelastic x-ray scattering from U 3 O 8 and UN’

In a recent manuscript, Lawrence Bright et al (2023 J. Phys.: Condens. Matter 35 175501) reported the resonant inelastic x-ray scattering spectra of U 3 O 8 , as well as UN. Their goal was to identify electronic multiplets associated with a 5f 1 configuration with ground state 2 F 5/2 . Complete active space self-consistent field with spin–orbit coupling (CASSCF-SOC) predicted that 2 F 5/2 transitions should be observable at 190 and 328 meV. However, these energies were not accessible in their experiment. Here they suggested that the recent inelastic neutron scattering results of Miskowiec et al (2021 Phys. Rev. B 103 205101) could have been sensitive to these transitions. Here we show that transitions of this possible origin appear in that dataset near 198, 262, 362, and potentially 448 meV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND

Fragment-based initialization for quantum subspace methods

Here, we present a novel quantum-classical algorithm called LAS-QKSD for multireference systems, by combining a classical localized active space (LAS) fragment-based multireference algorithm with the quantum Krylov subspace diagonalization (QKSD) method for quantum computers. The algorithm uses wave function information from a LAS self-consistent field (LASSCF) calculation to prepare an initial state with better overlap with the target ground state than the Hartree-Fock state. This is coupled with the use of QKSD to ultimately converge to the exact energy, providing faster convergence than starting from the Hartree-Fock state. Fragmentation has the two-fold benefit of fewer configurations on the classical side of the algorithm as well as fewer state preparation gates on the quantum side. First, we compare the LAS-QKSD method to the classical LASSCF method and to QKSD with a Hartree-Fock initial state. We then examine ways to load the LASSCF wave function using direct initialization and a QKSD-motivated spectral filtering approach. Finally, using a bimetallic complex, we show that the LAS-QKSD method is an efficient alternative to highly expensive complete active space SCF (CASSCF) calculations on strongly correlated systems.

D'Cunha, Ruhee

ELECTRONIC STRUCTURE METHODS AND PROTOCOLS WITH APPLICATION TO DYNAMICS, KINETICS AND THERMOCHEMISTRY

Hydrocarbon combustion involves the reaction dynamics of a tremendous number of species beginning with many-component fuel mixtures and proceeding via a complex system of intermediates to form primary and secondary products. Combustion conditions corresponding to new advanced engines and/or alternative fuels rely increasingly on autoignition and low-temperature-combustion chemistry. In these regimes various transient radical species such as HO2, ROO·, ·QOOH, HCO, NO2, HOCO, and Criegee intermediates play important roles in determining the detailed as well as more general dynamics. A clear understanding and accurate representation of these processes is needed for effective modeling. Given the difficulties associated with making reliable experimental measurements of these systems, computation can play an important role in developing these energy technologies. Accurate calculations have their own challenges since even within the simplest dynamical approximations such as transition state theory, the rates depend exponentially on critical barrier heights and these may be sensitive to the level of quantum chemistry. Moreover, it is well-known that in many cases it is necessary to go beyond statistical theories and consider the dynamics. Quantum tunneling, resonances, radiative transitions, and non-adiabatic effects governed by spin-orbit or derivative coupling can be determining factors in those dynamics. Building upon progress made during a period of prior support through the DOE Early Career Program, this project combines developments in the areas of potential energy surface (PES) fitting and multistate multireference quantum chemistry to allow spectroscopically and dynamically/kinetically accurate investigations of key molecular systems (such as those mentioned above), many of which are radicals with strong multireference character and have the possibility of multiple electronic states contributing to the observed dynamics. An ongoing area of investigation is to develop general strategies for robustly convergent electronic structure theory for global multichannel reactive surfaces including diabatization of energy and other relevant surfaces such as dipole transition. Combining advances in ab initio methods with automated interpolative PES fitting allows the construction of high-quality PESs (incorporating thousands of high-level data) to be done rapidly through parallel processing on high-performance computing (HPC) clusters. In addition, new methods and approaches to electronic structure theory will be developed and tested through applications. This project will explore limitations in traditional multireference calculations (e.g., MRCI) such as those imposed by internal contraction, lack of high-order correlation treatment and poor scaling. Methods such as DMRG-based extended active-space CASSCF and various Quantum Monte Carlo (QMC) methods will be applied (including VMC/DMC and FCIQMC). Insight into the relative significance of different orbital spaces and the robustness of application of these approaches on leadership class computing architectures will be gained. Synergy with other components of this research program such as automated PES fitting and multireference quantum chemistry will be used to address challenges encountered by the standard approaches to computational thermochemistry (those being single-reference quantum chemistry and perturbative treatments of the anharmonic vibrational energy, which break down for some cases of electronic structure or floppy strongly coupled vibrational modes).

74 ATOMIC AND MOLECULAR PHYSICS

CASSCF/CI calculations for first row transition metal hydrides - The TiH(4-phi), VH(5-delta), CrH(6-sigma-plus), MnH(7-sigma-plus), FeH(4,6-delta) and NiH(2-delta) states

Calculations are performed for the predicted ground states of TiH(4-phi), VH(5-delta), CrH(6-sigma-plus), MnH(7-sigma-plus), Fett(4,6-delta) and NiH(2-delta). For FeH both the 6-delta and 4-delta states are studied, since both are likely candidates for the ground state. The ground state symmetries are predicted based on a combination of atomic coupling arguments and coupling of 4s(2)3d(n) and 4s(1)3d(n+1) terms in the molecular system. Electron correlation is included by a CASSCF/CI (SD) treatment. The CASSCF includes near-degeneracy effects, while correlation of the 3d electrons in included at the CI level.

Walch, S. P.

On the nature of the bonding in Cu2 - An ab initio viewpoint

The bonding in Cu2 has been calculatively investigated. A CASSCF calculation is performed where the two 4s electrons are distributed in all possible ways among the 4s and 4p orbitals. The CAS results have a 3d population of 9.99. The corresponding orbitals between the CAS core orbitals at r(e) and the atomic SCF core orbitals show an overlap of 13.9992 out of a possible 14, with all of the change in sigma space. Thus, the CAS results show virtually no change in the d orbitals relative to the atom and can be considered as showing only a single bond. The reduction in 3d population, the decrease in r(e), and the increase in D(e) upon correlating the 3d shell indicates that the 3d electrons are slightly involved in the bonding, but there is no indication of the formation of a triple bond.

Bauschlicher, C. W., Jr.

On the electron affinity of Be2

Calculations of the electron affinity (EA) of Be2 using a large Slater-type orbital basis set and extensive correlation based upon a CASSCF reference are reported. The adiabatic EAs are estimated to be 0.44 eV for the 2Sigma sub g(+) state and 0.56 eV for the 2Pi sub u state. The extra electron attaches into an empty bonding orbital, causing a shortening of the bond length and an increase in omega(e). The D(e) of the 2Pi sub u state of Be2 is six times as large as the D(e) of Be2.

Bauschlicher, C. W., Jr.

On the low-lying states of TiC

The ground and low-lying excited states of TiC are investigated using a CASSCF-externally contracted CI approach. The calculations yield a 3Sigma(+) ground state, but the 1Sigma(+) state is only 780/cm higher and cannot be ruled out. The low-lying states have some triple bond character. The nature of the bonding and origin of the states are discussed.

Bauschlicher, C. W., Jr.

Theoretical calculation of ozone vibrational infrared intensities

An ab initio dipole moment function for ozone has been computed using the CASSCF (complete active space self-consistent field) method, and forms the basis for a calculation of ozone infrared band intensities. Vibrational wave functions were generated using the variational method with potential energy surfaces derived from experimental force constants. Computed values of the permanent dipole moment, dipole moment derivatives, and infrared band strengths are all found to be in remarkably good agreement with experiment. Intensities are predicted for hot bands for which experimental values are unavailable, and implications for atmospheric ozone spectroscopy are discussed. As the dipole moment matrix element signs are now established for nearly all of the observed bands, further refinement of the dipole moment function is possible.

Adler-Golden, S. M.

Theoretical research program to study chemical reactions in AOTV bow shock tubes

Progress in the development of computational methods for the characterization of chemical reactions in aerobraking orbit transfer vehicle (AOTV) propulsive flows is reported. Two main areas of code development were undertaken: (1) the implementation of CASSCF (complete active space self-consistent field) and SCF (self-consistent field) analytical first derivatives on the CRAY X-MP; and (2) the installation of the complete set of electronic structure codes on the CRAY 2. In the area of application calculations the main effort was devoted to performing full configuration-interaction calculations and using these results to benchmark other methods. Preprints describing some of the systems studied are included.

Taylor, P.

Benchmark full configuration-interaction calculations on HF and NH2

Full configuration-interaction (FCI) calculations are performed at selected geometries for the 1-sigma(+) state of HF and the 2-B(1) and 2-A(1) states of NH2 using both DZ and DZP gaussian basis sets. Higher excitations become more important when the bonds are stretched and the self-consistent field (SCF) reference becomes a poorer zeroth-order description of the wave function. The complete active space SCF - multireference configuration-interaction (CASSCF-MRCI) procedure gives excellent agreement with the FCI potentials, especially when corrected with a multi-reference analog of the Davidson correction.

Bauschlicher, C. W., Jr.

The nature of the bonding in XCO for X = Fe, Ni, and Cu

The bonding in the (5,3)Sigma - and 3Delta states of FeCO, the (3,1)Sigma + , 3Delta, and 3Pi states of NiCO, and the 2Sigma + state of CuCO are analyzed using the constrained-space orbital-variation (CSOV) technique for both (CASSCF) and SCF wave functions. The bonding is discussed in terms of sigma repulsion between the metals 4s and the CO 5-sigma and CO-to-metal sigma donation when there is an empty or partly occupied d-sigma orbital and metal-to-CO 2pi(asterisk) backdonation. The bonding is compared for the different metals and between the different states.

Bauschlicher, C. W., Jr.

Benchmark full configuration-interaction calculations on HF and NH2

Full configuration-interaction (FCI) calculations are performed at selected geometries for the 1-sigma(+) state of HF and the 2-B(1) and 2-A(1) states of NH2 using both DZ and DZP gaussian basis sets. Higher excitations become more important when the bonds are stretched and the self-consistent field (SCF) reference becomes a poorer zeroth-order description of the wave function. The complete active space SCF - multireference configuration-interaction (CASSCF-MRCI) procedure gives excellent agreement with the FCI potentials, especially when corrected with a multi-reference analog of the Davidson correction.

Bauschlicher, C. W., Jr.

Theoretical study of the electric dipole moment function of the ClO molecule

The potential energy function and electric dipole moment function (EDMF) are computed for ClO X 2Pi using several different techniques to include electron correlation. The EDMF is used to compute Einstein coefficients, vibrational lifetimes, and dipole moments in higher vibrational levels. The band strength of the 1-0 fundamental transition is computed to be 12 + or - 2 per sq cm atm determined from infrared heterodyne spectroscopy. The theoretical methods used include SCF, CASSCF, multireference singles plus doubles configuration interaction (MRCI) and contracted CI, coupled pair functional (CPF), and a modified version of the CPF method. The results obtained using the different methods are critically compared.

Pettersson, L. G. M.

Theoretical dipole moments for the first-row transition metal hydrides

Spectroscopic parameters (D sub e, r sub e, mu) are determined for the first-row transition metal hydrides using better than DZP basis sets at the modified coupled pair functional (MCPF) level. Extensive comparisons between MCPF and complete-active space self-consistent field (CASSCF)/MRCI calculations with natural orbital iterations, and studies with more extensive basis sets, show this level of treatment to supply an accurate and cost-effective treatment of these systems. For the transition metal hydrides, the bonding can arise from either the 3d(n)4s(2) or 3d(n + 1)4s(1) atomic asymptotes, or a mixture of both. Since the dipole moment arising from these two bonding mechanisms is very different, the dipole moment is found to be directly related to the 3d population. Thus, the magnitude of the dipole moments provides a sensitive test of the wave function, and gives insight into the nature of the bonding.

Chong, D. P.

Full CI benchmark calculations on N2, NO, and O2 - A comparison of methods for describing multiple bonds

Full configuration interaction (CI) calculations on the ground states of N2, NO, and O2 using a DZP Gaussian basis are compared with single-reference SDCI and coupled pair approaches (CPF), as well as with CASSCF multireference CI approaches. The CASSCF/MRCI technique is found to describe multiple bonds as well as single bonds. Although the coupled pair functional approach gave chemical accuracy (1 kcal/mol) for bonds involving hydrogen, larger errors occur in the CPF approach for the multiple bonded systems considered here. CI studies on the 1Sigma(g +) state of N2, including all single, double, triple, and quadruple excitations show that triple excitations are very important for the multiple bond case, and accounts for most of the deficiency in the coupled pair functional methods.

Bauschlicher, Charles W., Jr.

Extended active space CASSCF/MRSD CI calculations of the barrier height for the reaction O + H2 yields OH + H

The convergence of the barrier height for the O + H2 yields OH + H reaction is studied as a function of the size of the active space in the CASSCF calculation and the size of the basis set. The basis set employed in this study is described. The sources of the differences between the POL-CI and MRSD-CI calculations for barrier height are examined. It is observed that the barrier height is rapidly convergent with respect to the expansion of the active space. The effects of adding active orbitals on the barrier height are investigated. The barrier height estimated from corrected MRSD-CI data is 12.4 kcal/mol.

Walch, Stephen P.