Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bioinspired structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

3D printable silicone compositions exhibiting high toughness and low durometer

3D printable silicones can be designed with varying crosslink density, network structures, and types of reinforcing additives. Within this design space, one may tailor the uncured material’s rheology and mechanical response to access a wide range of potential applications. However, printable, low modulus silicones, particularly those applicable to direct ink write, are underreported in published literature. To address the need for higher performance, low modulus silicones with demonstrated printability, a new set of ca. 20–50 Shore A hardness silicone elastomers exhibiting ca. 7 MPa ultimate tensile strength and ca. 400–1200% elongation at break is presented. Mechanical properties were analyzed, providing insight to the effects of formulation constituents on mechanical properties. Cyclic mechanical testing of the silicone formulations was also performed, and the energy loss and permanent set throughout cycling were determined. In conclusion, printed structures demonstrate the feasibility of these new silicones as durable frameworks for novel soft device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Bioinspired Activation of N 2 on Asymmetrical Coordinated Fe Grafted 1T MoS 2 at Room Temperature

Inspired by the nitrogen fixation process on MoFe nitrogenase, asymmetrical coordinated Fe grafted onto 1T MoS 2 were successfully synthesized. The unique electron -rich structure with asymmetrical coordination made the 1T Fe 0.1 Mo 0.9 S 2 layered material actively react with water and dinitrogen at room temperature and atmosphere pressure. Subsequently, ammonia can be produced with a yield of 800 pmol (NH 4 + ) g -1 (12.5% yield in mole). The activation, fixation and reduction of dinitrogen were confirmed by isotopically labeled experiments. The location and the specific coordination environment of grafted Fe in Fe-Mo-S were further determined by X-ray absorption spectroscopy analysis. Our work demonstrates that the nitrogen fixation and reduction for ammonia at room temperature without any chemical and electrochemical assistance is distinctly different from traditional bionic -inspired nitrogen fixation process. The mechanism of the activation and reduction of N 2 was further investigated by density functional theory calculation and Raman spectra. Compared with 1T MoS 2 , the enriched electron nature and asymmetrical coordination of Fe in Fe-Mo-S materials play a critical role in the bioinspired activation of N 2 at ambient condition.

1T MoS2↗
DOE OSTI2026

Bioinspired Design of Dissipative Self-Assembly of Active Materials (Final Technical Report)

The major objective of this DOE-funded research program was to establish general, experimentally validated design principles for dissipative, out-of-equilibrium self-assembly of synthetic active materials. In living systems, structures such as actin filaments and microtubules are maintained far from thermodynamic equilibrium through continuous energy consumption. This persistent nonequilibrium operation enables functions including adaptability, self-healing, directed motion, and force generation—properties that are largely absent in traditional equilibrium soft materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hierarchical supramolecular assembly of a single peptoid polymer into a planar nanobrush with two distinct molecular packing motifs

Significance The preparation of hierarchical biomimetic nanostructures remains a challenging task. Bioinspired peptoid polymers offer a promising opportunity to encode assembly information within the component chains. Here, we report a one-pot preparation of planar nanobrush structures from poly(ethyleneglycol)- block -poly( N -octylglycine) based on tuning the interplay of crystallization and solvophobicity. Each nanobrush assembly is composed of two distinct structural domains, which form sequentially by control of the solution temperature, and contain distinct molecular packing motifs. Micellar intermediates first assemble into linear arrays at elevated temperature in a mesophase state, followed by lateral, crystallization-driven growth in a living manner upon cooling. Precise control over the nanobrush dimensions could be achieved. The structural tunability and excellent biocompatibility of polypeptoids offer great potential for nanomaterials inaccessible previously.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Bioinspired synthesis of thermally stable and mechanically strong nanocomposite coatings

Abstract An innovative biomimetic method has been developed to synthesize layered nanocomposite coatings using silica and sugar-derived carbon to mimic the formation of a natural seashell structure. The layered nanocomposites are fabricated through alternate coatings of condensed silica and sugar. Sugar-derived carbon is a cost-effective material as well as environmentally friendly. Pyrolysis of sugar will form polycyclic aromatic carbon sheets, i.e., carbon black. The resulting final nanocomposite coatings can survive temperatures of more than 1150 °C and potentially up to 1650 °C. These coatings have strong mechanical properties, with hardness of more than 11 GPa and elastic modulus of 120 GPa, which are 80% greater than those of pure silica. The layered coatings have many applications, such as shielding in the form of mechanical barriers, body armor, and space debris shields. Graphical abstract

36 MATERIALS SCIENCE↗
DOE OSTI2026

Charge Transport in Solvated Donor–Acceptor Functionalized Peptoids: Molecular Dynamics and Rate Theory

Scalable solar-energy conversion requires photoactive materials that combine the efficiency of natural photosynthetic systems with the stability and processability needed for practical applications. Achieving reliable charge transport in soft, self-assembled organic materials remains challenging, as structural fluctuations and environmental effects strongly influence charge-transfer (CT) rates. Here, we present a broadly applicable computational framework for evaluating CT rates in the condensed phase, combining Fermi’s golden rule rate theory with inputs from all-atom molecular dynamics (MD) simulations and first-principles electronic-structure calculations. The approach does not rely on system-specific parametrization and is applicable to a wide range of soft and disordered materials. We demonstrate the applicability and usefulness of the framework on redox-active peptoids functionalized with iron–porphyrin (Fe–P) complexes, a bioinspired platform with programmable donor–acceptor units and tunable three-dimensional organization. The calculated CT rates exhibit strong sensitivity to molecular conformation, with variations spanning several orders of magnitude. This dependence is shown to arise from the pronounced variation in diabatic electronic coupling with the relative orientations and separations of the Fe–P complexes across the conformational ensemble. The framework provides a consistent route for connecting atomistic structure to CT kinetics in the condensed phase and enables analysis of structure–rate relations in organic semiconducting systems.

Charge transfer↗
DOE OSTI2024

In Silico Screening of CO 2 –Dipeptide Interactions for Bioinspired Carbon Capture

Carbon capture, sequestration and utilization offers a viable solution for reducing the total amount of atmospheric CO 2 concentrations. On an industrial scale, amine-based solvents are extensively employed for CO 2 capture through chemisorption. Nevertheless, this method is marked by the high cost associated with solvent regeneration, high vapor pressure, and the corrosive and toxic attributes of by-products, such as nitrosamines. An alternative approach is the biomimicry of sustainable materials that have strong affinity and selectivity for CO 2 . Bioinspired approaches, such as those based on naturally occurring amino acids, have been proposed for direct air capture methodologies. In this study, we present a database consisting of 960 dipeptide molecular structures, composed of the 20 naturally occurring amino acids. Furthermore, those structures were analyzed with a novel computational workflow presented in this work that considers certain interaction sites that determine CO 2 affinity. Density functional theory (DFT) and symmetry-adapted perturbation theory (SAPT) computations were performed for the calculation of CO 2 interaction energies, which allowed to limit our search space to 400 unique dipeptide structures. Using this computational workflow, we provide statistical insights into dipeptides and their affinity for CO 2 binding, as well as design principles that can further enhance CO 2 capture through cooperative binding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Evaluating Fracture Behavior of Bioinspired Alumina-YSZ Composites through Static and Dynamic Mechanical Testing

Ceramic materials are known for their high hardness and strength but are limited by low toughness and sudden failure. Inspired by the microstructure of dental enamel, which features undulating rods that promote crack deflection and energy absorption, architected specimens were designed and manufactured. A bespoke ball-on-ring (BoR) testing apparatus measured the static biaxial rupture strength of these bioinspired materials. Additionally, impact testing with spherical steel projectiles assessed their behavior under dynamic conditions. Monolithic alumina specimens were compared to architected alumina reinforced with yttria-stabilized zirconia (YSZ) rods produced via direct ink write 3D printing. BoR tests revealed that monolithic alumina had a Weibull modulus of 10.53 and a characteristic strength of 372.3 MPa, while the composite specimens showed a Weibull modulus of 5.46 and a characteristic strength of 213.3 MPa. Although the composite failed at lower stresses and projectile velocities, it exhibited notable crack deflection and fracture resistance, with cracks being effectively interrupted by the rod inclusions. The composite specimens also resulted in fewer and larger fragments upon impact. Finite element simulations confirmed the effectiveness of the rod structures in enhancing fracture resistance.

Bioinspired materials↗
DOE OSTI2023

Biomimetic Fe–Cu Porphyrrole Aerogel Electrocatalyst for Oxygen Reduction Reaction

The development of bioinspired catalysts for oxygen reduction reaction is one of the most prominent pathways in the search for active materials to replace Pt-based catalysts in fuel cells. Herein, we report innovative bioinspired catalysts using a directed synthetic pathway to create adjacent Cu and Fe sites. This catalyst is composed of a covalent 3D framework in an aerogel form. Aerogels are high surface area and porous hierarchical structures that can allow the formation of ultrahigh active site density and optimized mass transport of reactants and products to and from the catalytic sites. The aerogel-based catalyst exhibits high performance in a half-cell in 0.1 M KOH, with an onset potential of 0.94 V vs RHE and half-wave potential of E 1/2 = 0.80 V vs RHE, high selectivity toward the four-electron reduction of oxygen to hydroxide anions, and high durability. These results are well-translated to the anion exchange membrane fuel cell (AEMFC), reaching an open circuit potential of 0.97 V and iR-corrected peak power density of 0.51 W cm –2 . Based on density functional theory calculations, the improved activity relative to the Fe-porphyrin and Cu-corrole is ascribed to the effect of the extended carbon network and the proximity of the metal sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synthetic Control of Exciton Dynamics in Bioinspired Cofacial Porphyrin Dimers

Understanding how the complex interplay among excitonic interactions, vibronic couplings, and reorganization energy determines coherence-enabled transport mechanisms is a grand challenge with both foundational implications and potential payoffs for energy science. We use a combined experimental and theoretical approach to show how a modest change in structure may be used to modify the exciton delocalization, tune electronic and vibrational coherences, and alter the mechanism of exciton transfer in covalently linked cofacial Zn-porphyrin dimers (meso-beta linked AB m-β and meso-meso linked AA m-m ). While both AB m-β and AA m-m feature zinc porphyrins linked by a 1,2-phenylene bridge, differences in the interporphyrin connectivity set the lateral shift between macrocycles, reducing electronic coupling in AB m-β and resulting in a localized exciton. Pump-probe experiments show that the exciton dynamics is faster by almost an order of magnitude in the strongly coupled AA m-m dimer, and two-dimensional electronic spectroscopy (2DES) identifies a vibronic coherence that is absent in AB m-β . Theoretical studies indicate how the interchromophore interactions in these structures, and their system-bath couplings, influence excitonic delocalization and vibronic coherence-enabled rapid exciton transport dynamics. Real-time path integral calculations reproduce the exciton transfer kinetics observed experimentally and find that the linking-modulated exciton delocalization strongly enhances the contribution of vibronic coherences to the exciton transfer mechanism, and that this coherence accelerates the exciton transfer dynamics. These benchmark molecular design, 2DES, and theoretical studies provide a foundation for directed explorations of nonclassical effects on exciton dynamics in multiporphyrin assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Navigating the Expansive Landscapes of Soft Materials: A User Guide for High-Throughput Workflows

Synthetic polymers are highly customizable with tailored structures and functionality, yet this versatility generates challenges in the design of advanced materials due to the size and complexity of the design space. Thus, exploration and optimization of polymer properties using combinatorial libraries has become increasingly common, which requires careful selection of synthetic strategies, characterization techniques, and rapid processing workflows to obtain fundamental principles from these large data sets. Herein, we provide guidelines for strategic design of macromolecule libraries and workflows to efficiently navigate these high-dimensional design spaces. We describe synthetic methods for multiple library sizes and structures as well as characterization methods to rapidly generate data sets, including tools that can be adapted from biological workflows. We further highlight relevant insights from statistics and machine learning to aid in data featurization, representation, and analysis. This Perspective acts as a “user guide” for researchers interested in leveraging high-throughput screening toward the design of multifunctional polymers and predictive modeling of structure–property relationships in soft materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bioinspired Catalyst Design Principles: Progress in Emulating Properties of Enzymes in Synthetic Catalysts

Catalysis enables many aspects of modern life, including fuels, products, plastics, and medicines. Recent advances in catalysis have enabled us to realize higher efficiencies and new processes. Ideally, we seek to achieve high rates of selective conversions using catalysts derived from abundantly available elements and operating under mild conditions, specifically lower reaction temperatures and pressures. Such catalysts could enable decentralized, on-demand synthesis of chemicals and energy carriers. Nature has demonstrated the feasibility of this approach with enzymes, which showcase catalytic processes at low temperatures and pressures with nonprecious metals. Current thinking holds that in addition to the active site, the complexity of the enzyme structure, specifically the protein scaffold, is also critical to achieving this performance. Recreating this environment has been a long-standing scientific goal. However, we still understand the functions of enzymes better than we understand the de novo design of catalysts that mimic enzymes features, while also retaining their activity and selectivity under more demanding conditions. Here, in this Perspective, we will critically examine four key areas of catalyst design that incorporate the chemical and structural properties of enzymes into synthetic catalysts: (i) the use of confinement to enhance catalytic activity, (ii) tailoring the environment around the active site, (iii) proton transport, and (iv) bifunctionality and cooperativity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ligand-Functionalized Polymer Membranes for Selective Ion Separations

Selective ion separations are central to technologies spanning water purification, resource recovery, and clean energy. Conventional polymer membranes, which rely on steric hindrance or Donnan exclusion, struggle to discriminate between chemically similar ions in high-ionic-strength environments. Ligand-functionalized membranes offer a transformative strategy by embedding molecular recognition directly into polymer matrices, enabling selective complexation and transport. Here, this Viewpoint highlights the structure–function relationships underlying ligand-mediated ion separation, emphasizing the interplay of dehydration penalties, ligand coordination, and nanoscale confinement. We discuss design principles, denticity, donor identity, rigidity, and spatial organization, alongside the permeability–selectivity trade-off, multicomponent effects, and stability challenges. Finally, we outline emerging strategies, from bioinspired ligands to computationally guided design, that chart a path toward next-generation membranes for precise and energy-efficient ion separations.

ions↗
DOE OSTI2025

Bio-inspired multiscale design for perovskite solar cells

Metal halide perovskite semiconductors have attractive light-harvesting and charge-carrier transport properties for photovoltaics. Perovskite solar cells (PSCs) and modules have demonstrated their commercial promise with high power conversion efficiencies, but still face stability challenges. In this Review, we explore how biomaterials offer design inspiration for the development of durable and efficient PSCs at three different scales. At the molecular level, bio-inspired molecular interactions are harnessed towards crystallization control and degradation prevention, which offers an enhancement in long-term maximum-power-point tracking stability. At the microstructural level, self-healing and strength-enhancing strategies, utilizing dynamic bonds and interfacial reinforcement, can help PSCs to recover from physical damage and maintain high performance. At the device level, macroscopic functionalities, such as moth-eye-inspired structures tailored to different layers, can collectively enable antireflection, radiative cooling and self-cleaning to optimize light management, heat dissipation and encapsulation in PSCs. Bio-inspired PSC research can combine improved efficiency and lifetime, with abundant, biocompatible alternatives to conventional stabilizers. Future efforts should focus on screening bioinspired molecules to optimize film crystallization and stability, developing self-healing mechanisms triggered by operational stress, designing cost-efficient biomicrostructures, and integrating multifunctional encapsulation to enhance the efficiency and lifespan of PSCs.

Duan, Tianwei↗
DOE OSTI2023

Ultrastrong Ionotronic Films Showing Electrochemical Osmotic Actuation

Abstract A multifunctional soft material with high ionic and electrical conductivity, combined with high mechanical properties and the ability to change shape can enable bioinspired responsive devices and systems. The incorporation of all these characteristics in a single material is very challenging, as the improvement of one property tends to reduce other properties. Here, a nanocomposite film based on charged, high‐aspect‐ratio 1D flexible nanocellulose fibrils, and 2D Ti 3 C 2 T x MXene is presented. The self‐assembly process results in a stratified structure with the nanoparticles aligned in‐plane, providing high ionotronic conductivity and mechanical strength, as well as large water uptake. In hydrogel form with 20 wt% liquid, the electrical conductivity is over 200 S cm −1 and the in‐plane tensile strength is close to 100 MPa. This multifunctional performance results from the uniquely layered composite structure at nano‐ and mesoscales. A new type of electrical soft actuator is assembled where voltage as low as ±1 V resulted in osmotic effects and giant reversible out‐of‐plane swelling, reaching 85% strain.

Chemistry↗
DOE OSTI2021

Microbial production of megadalton titin yields fibers with advantageous mechanical properties

Manmade high-performance polymers are typically non-biodegradable and derived from petroleum feedstock through energy intensive processes involving toxic solvents and byproducts. While engineered microbes have been used for renewable production of many small molecules, direct microbial synthesis of high-performance polymeric materials remains a major challenge. Here we engineer microbial production of megadalton muscle titin polymers yielding high-performance fibers that not only recapture highly desirable properties of natural titin (i.e., high damping capacity and mechanical recovery) but also exhibit high strength, toughness, and damping energy — outperforming many synthetic and natural polymers. Structural analyses and molecular modeling suggest these properties derive from unique inter-chain crystallization of folded immunoglobulin-like domains that resists inter-chain slippage while permitting intra-chain unfolding. These fibers have potential applications in areas from biomedicine to textiles, and the developed approach, coupled with the structure-function insights, promises to accelerate further innovation in microbial production of high-performance materials.

36 MATERIALS SCIENCE↗