Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BUTANOLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Low and High Temperature Combustion Chemistry of Butanol Isomers in Premixed Flames and Autoignition Systems

Butanol is a fuel that has been proposed as a bio-derived alternative to conventional petroleum derived fuels. The structural isomer in traditional 'bio-butanol' fuel is n-butanol, but newer conversion technologies produce iso-butanol as a fuel. In order to better understand the combustion chemistry of bio-butanol, this study presents a comprehensive chemical kinetic model for all the four isomers of butanol (e.g., 1-, 2-, iso- and tert-butanol). The proposed model includes detailed high temperature and low temperature reaction pathways. In this study, the primary experimental validation target for the model is premixed flat low-pressure flame species profiles obtained using molecular beam mass spectrometry (MBMS). The model is also validated against previously published data for premixed flame velocity and n-butanol rapid compression machine and shock tube ignition delay. The agreement with these data sets is reasonably good. The dominant reaction pathways at the various pressures and temperatures studied are elucidated. At low temperature conditions, we found that the reaction of alphahydroxybutyl with O{sub 2} was important in controlling the reactivity of the system, and for correctly predicting C{sub 4} aldehyde profiles in low pressure premixed flames. Enol-keto isomerization reactions assisted by HO{sub 2} were also found to be important in converting enols to aldehydes and ketones in the low pressure premixed flames. In the paper, we describe how the structural features of the four different butanol isomers lead to differences in the combustion properties of each isomer.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Metabolic process engineering of Clostridium tyrobutyricum Δ ack – adhE2 for enhanced n‐butanol production from glucose: Effects of methyl viologen on NADH availability, flux distribution, and fermentation kinetics

ABSTRACT Butanol biosynthesis through aldehyde/alcohol dehydrogenase ( adhE2 ) is usually limited by NADH availability, resulting in low butanol titer, yield, and productivity. To alleviate this limitation and improve n‐butanol production by Clostridium tyrobutyricum Δ ack – adhE2 overexpressing adhE2 , the NADH availability was increased by using methyl viologen (MV) as an artificial electron carrier to divert electrons from ferredoxin normally used for H 2 production. In the batch fermentation with the addition of 500 μM MV, H 2 , acetate, and butyrate production was reduced by more than 80–90%, while butanol production increased more than 40% to 14.5 g/L. Metabolic flux analysis revealed that butanol production increased in the fermentation with MV because of increased NADH availability as a result of reduced H 2 production. Furthermore, continuous butanol production of ∼55 g/L with a high yield of ∼0.33 g/g glucose and extremely low ethanol, acetate, and butyrate production was obtained in fed‐batch fermentation with gas stripping for in situ butanol recovery. This study demonstrated a stable and reliable process for high‐yield and high‐titer n‐butanol production by metabolically engineered C. tyrobutyricum by applying MV as an electron carrier to increase butanol biosynthesis. Biotechnol. Bioeng. 2015;112: 705–715. © 2014 Wiley Periodicals, Inc.

Du, Yinming↗

Engineering Clostridium cellulovorans for highly selective n ‐butanol production from cellulose in consolidated bioprocessing

Abstract Cellulosic n ‐butanol from renewable lignocellulosic biomass has gained increased interest. Previously, we have engineered Clostridium cellulovorans , a cellulolytic acidogen, to overexpress the bifunctional butyraldehyde/butanol dehydrogenase gene adh E2 from C. acetobutylicum for n ‐butanol production from crystalline cellulose. However, butanol production by this engineered strain had a relatively low yield of approximately 0.22 g/g cellulose due to the coproduction of ethanol and acids. We hypothesized that strengthening the carbon flux through the central butyryl‐CoA biosynthesis pathway and increasing intracellular NADH availability in C. cellulovorans adh E2 would enhance n ‐butanol production. In this study, thiolase ( thl A CA ) from C. acetobutylicum and 3‐hydroxybutyryl‐CoA dehydrogenase ( hbd CT ) from C. tyrobutyricum were overexpressed in C. cellulovorans adh E2 to increase the flux from acetyl‐CoA to butyryl‐CoA. In addition, ferredoxin‐NAD(P) + oxidoreductase ( fnr ), which can regenerate the intracellular NAD(P)H and thus increase butanol biosynthesis, was also overexpressed. Metabolic flux analyses showed that mutants overexpressing these genes had a significantly increased carbon flux toward butyryl‐CoA, which resulted in increased production of butyrate and butanol. The addition of methyl viologen as an electron carrier in batch fermentation further directed more carbon flux towards n ‐butanol biosynthesis due to increased reducing equivalent or NADH. The engineered strain C. cellulovorans adh E2‐ fnr CA ‐ thl A CA ‐ hbd CT produced n ‐butanol from cellulose at a 50% higher yield (0.34 g/g), the highest ever obtained in batch fermentation by any known bacterial strain. The engineered C. cellulovorans is thus a promising host for n ‐butanol production from cellulosic biomass in consolidated bioprocessing.

Bao, Teng↗

Comparative Study of the Effect of Defects on Selective Adsorption of Butanol from Butanol/Water Binary Vapor Mixtures in Silicalite-1 Films

A promising route for sustainable 1-butanol (butanol) production is ABE (acetone, butanol, ethanol) fermentation. However, recovery of the products is challenging because of the low concentrations obtained in the aqueous solution, thus hampering large-scale production of biobutanol. Membrane and adsorbent-based technologies using hydrophobic zeolites are interesting alternatives to traditional separation techniques (e.g., distillation) for energy-efficient separation of butanol from aqueous mixtures. To maximize the butanol over water selectivity of the material, it is important to reduce the number of hydrophilic adsorption sites. This can, for instance, be achieved by reducing the density of lattice defect sites where polar silanol groups are found. The density of silanol defects can be reduced by preparing the zeolite at neutral pH instead of using traditional synthesis solutions with high pH. In this work, binary adsorption of butanol and water in two silicalite-1 films was studied using in situ attenuated total reflectance–Fourier transform infrared (ATR-FTIR) spectroscopy under equal experimental conditions. One of the films was prepared in fluoride medium, whereas the other one was prepared at high pH using traditional synthesis conditions. The amounts of water and butanol adsorbed from binary vapor mixtures of varying composition were determined at 35 and 50 °C, and the corresponding adsorption selectivities were also obtained. Both samples showed very high selectivities (100–23 000) toward butanol under the conditions studied. The sample having low density of defects, in general, showed ca. a factor 10 times higher butanol selectivity than the sample having a higher density of defects at the same experimental conditions. This difference was due to a much lower adsorption of water in the sample with low density of internal defects. Analysis of molecular simulation trajectories provides insights on the local selectivities in the zeolite channel network and at the film surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An integrated process for butanol production from cellulosic biomass and CO 2 using engineered clostridia in a linear immobilized bioreactor

Engineered platforms using mixed microbial consortia to consolidate multiple reaction steps and perform disparate conversions simultaneously can substantially enhance the carbon efficiency of biomass conversion processes and lower the biofuel cost to an economically competitive level. In this project, an integrated process will be developed to produce n-butanol from cellulosic biomass and waste gas streams using two engineered clostridial strains, one butanol-tolerant solventogenic strain and one carboxydotrophic acetogen, co-immobilized in a “Linear Immobilized Bioreactor” (LIBR). The CO 2 and H 2 produced by the solventogenic strain will be used by the carboxydotrophic strain to produce acetate (and butyrate) that in turns can be used by the solventogenic strain to produce more butanol. Such a co-cultured fermentation has the potential to increase butanol production from biomass hydrolysate sugars by up to 50% with 100% reduction in CO 2 emission. Butanol produced in the fermentation will be stripped by the rising bubbles of fermentation produced gases (CO 2 and H 2 ) in the LIBR and separated via a condenser, alleviating butanol inhibition while achieving continuous butanol production at a high productivity and product titer, which can reduce both water and energy consumptions by over 50% compared to conventional ethanol and ABE fermentation processes. Phase I study proved the new bioprocess concept and verified our hypothesis that the proposed LIBR and co-cultured fermentation can enhance the conversion of lignocellulosic sugars to butanol with higher butanol yield, productivity and titer, leading to reduced biobutanol cost to compete more favorably with bioethanol and fossil fuels. A prototype lab-scale LIBR for multiphase fermentation was constructed to investigate and demonstrate the technical feasibility and advantages of the LIBR for multiphase fermentation involving sugars and gaseous substrates. The LIBR will be optimized and evaluated for its economic feasibility for biobutanol production from lignocellulosic biomass and industrial waste gases in Phase II.

09 BIOMASS FUELS↗

Bioalcohol production from acidogenic products via a two-step process: A case study of butyric acid to butanol

This article presents the full study (lab-scale experimental study and large-scale techno-economic analysis) results of a two-step catalytic process for the conversion of organic waste–derived butyric acid to butanol. Butanol from biomass resources like organic waste promise to become an attractive and sustainable fuel and industrial precursor due to an increase in greenhouse gas content in the atmosphere. Therefore, research in this field is important for energy applications and reduction in greenhouse gas emissions. In this regard, a two-step process was applied in this study to produce butanol from butyric acid that can potentially be derived from organic waste. The two-step process consists of the (1) esterification of butyric acid to methyl butyrate and (2) hydrogenolysis of this methyl butyrate to butanol. The first reaction, esterification of butyric acid, was optimized using carbon-based catalysts. The production of butanol from methyl butyrate via hydrogenolysis was investigated using bimetallic Pt–Co catalysts. The hydrogenolysis of methyl butyrate on these catalysts under optimal conditions of 250 °C, 5 MPa H 2 , and a feed/catalyst weight ratio of 11.2 led to 54.1% selectivity toward 1-butanol. Based on the experimental results, an integrated process simulation model was developed to determine the economic potential of the two-step production of butanol from butyric acid. Using this model, the techno-economic feasibility of the two-step process was analyzed. Here, the minimum selling price (MSP) of 1-butanol produced from butyric acid using this process was US dollars 3.388 per gallon of gasoline equivalent (GGE). This MSP is in the range of recent biofuel market prices of US dollars 2.03/GGE to US dollars 3.83/GGE.

09 BIOMASS FUELS↗

Reduced Chemistry for Butanol Isomers at Engine-Relevant Conditions

Butanol has received significant research attention as a second-generation biofuel in the past few years. In the present study, skeletal mechanisms for four butanol isomers were generated from two widely accepted, well-validated detailed chemical kinetic models for the butanol isomers. The detailed models were reduced using a two-stage approach consisting of the directed relation graph with error propagation and sensitivity analysis. During the reduction process, issues were encountered with pressure-dependent reactions formulated using the logarithmic pressure interpolation approach; these issues are discussed and recommendations are made to avoid ambiguity in its future implementation in mechanism development. The performance of the skeletal mechanisms generated here was compared with that of detailed mechanisms in simulations of autoignition delay times, laminar flame speeds, and perfectly stirred reactor temperature response curves and extinction residence times, over a wide range of pressures, temperatures, and equivalence ratios. Good agreement was observed between the detailed and skeletal mechanisms, demonstrating the adequacy of the resulting reduced chemistry for all the butanol isomers in predicting global combustion phenomena. In addition, the skeletal mechanisms closely predicted the time-histories of fuel mass fractions in homogeneous compression-ignition engine simulations. The performance of each butanol isomer was additionally compared with that of a gasoline surrogate with an antiknock index of 87 in a homogeneous compression-ignition engine simulation. The gasoline surrogate was consumed faster than any of the butanol isomers, with tert -butanol exhibiting the slowest fuel consumption rate. As a result, while n -butanol and isobutanol displayed the most similar consumption profiles relative to the gasoline surrogate, the two literature chemical kinetic models predicted different orderings.

09 BIOMASS FUELS↗

Comparative genomic and proteomic analyses of Clostridium acetobutylicum Rh8 and its parent strain DSM 1731 revealed new understandings on butanol tolerance

Highlights: • Genomes of a butanol tolerant strain and its parent strain were deciphered. • Comparative genomic and proteomic was applied to understand butanol tolerance. • None differentially expressed proteins have mutations in its corresponding genes. • Mutations in ribosome might be responsible for the global difference of proteomics. - Abstract: Clostridium acetobutylicum strain Rh8 is a butanol-tolerant mutant which can tolerate up to 19 g/L butanol, 46% higher than that of its parent strain DSM 1731. We previously performed comparative cytoplasm- and membrane-proteomic analyses to understand the mechanism underlying the improved butanol tolerance of strain Rh8. In this work, we further extended this comparison to the genomic level. Compared with the genome of the parent strain DSM 1731, two insertion sites, four deletion sites, and 67 single nucleotide variations (SNVs) are distributed throughout the genome of strain Rh8. Among the 67 SNVs, 16 SNVs are located in the predicted promoters and intergenic regions; while 29 SNVs are located in the coding sequence, affecting a total of 21 proteins involved in transport, cell structure, DNA replication, and protein translation. The remaining 22 SNVs are located in the ribosomal genes, affecting a total of 12 rRNA genes in different operons. Analysis of previous comparative proteomic data indicated that none of the differentially expressed proteins have mutations in its corresponding genes. Rchange Algorithms analysis indicated that the mutations occurred in the ribosomal genes might change the ribosome RNA thermodynamic characteristics, thus affect the translation strength of these proteins. Take together, the improved butanol tolerance of C. acetobutylicum strain Rh8 might be acquired through regulating the translational process to achieve different expression strength of genes involved in butanol tolerance.

60 APPLIED LIFE SCIENCES↗

n -Butanol and ethanol production from cellulose by Clostridium cellulovorans overexpressing heterologous aldehyde/alcohol dehydrogenases

With high cellulolytic and acetic/butyric acids production abilities, Clostridium cellulovorans is promising for use to produce cellulosic n -butanol. Here, we introduced three different aldehyde/alcohol dehydrogenases encoded by bdh B, adh E1, and adh E2 from Clostridium acetobutylicum into C. cellulovorans and studied their effects on ethanol and n-butanol production. Compared to AdhE2, AdhE1 was more specific for n -butanol biosynthesis over ethanol. Co-expressing adh E1 with bdh B produced a comparable amount of butanol but significantly less ethanol, leading to a high butanol/ethanol ratio of 7.0 and 5.6 (g/g) in glucose and cellulose fermentation, respectively. Co-expressing adh E1 or adh E2 with bdh B did not increase butanol production because the activity of BdhB was limited by the NADPH availability in C. cellulovorans . Altogether, the strain overexpressing adhE2 alone produced the most n -butanol (4.0 g/L, yield: 0.22 ± 0.01 g/g). Based on the insights from this study, further metabolic engineering of C. cellulovorans for cellulosic n -butanol production is suggested.

09 BIOMASS FUELS↗

An experimental and kinetic modeling study of n-butanol combustion

n-Butanol is a fuel that has been proposed as an alternative to conventional gasoline and diesel fuels. In order to better understand the combustion characteristics of n-butanol, this study presents new experimental data for n-butanol in three experimental configurations. Species concentration profiles are presented in jet stirred reactor (JSR) at atmospheric conditions and a range of equivalence ratios. The laminar flame speed obtained in an n-butanol premixed laminar flame is also provided. In addition, species concentration profiles for n-butanol and n-butane in an opposed-flow diffusion flame are presented. The oxidation of n-butanol in the aforementioned experimental configurations has been modeled using an improved detailed chemical kinetic mechanism (878 reactions involving 118 species) derived from a previously proposed scheme in the literature. The proposed mechanism shows good qualitative agreement with the various experimental data. Sensitivity analyses and reaction path analyses have been conducted to interpret the results from the JSR and opposed-flow diffusion flame. It is shown that the main reaction pathway in both configurations is via H-atom abstraction from the fuel followed by {beta}-scission of the resulting fuel radicals. Several unimolecular decomposition reactions are important as well. This study gives a better understanding of n-butanol combustion and the product species distribution. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation of 1-butanol and a mixture of n-heptane/1-butanol in a motored engine

The oxidation of neat 1-butanol and a mixture of n-heptane and 1-butanol was studied in a modified CFR engine at an equivalence ratio of 0.25 and an intake temperature of 120 C. The engine compression ratio was gradually increased from the lowest point to the point where significant high temperature heat release was observed. Heat release analyses showed that no noticeable low temperature heat release behavior was observed from the oxidation of neat 1-butanol while the n-heptane/1-butanol mixture exhibited pronounced cool flame behavior. Species concentration profiles were obtained via GC-MS and GC-FID/TCD. Quantitative analyses of the reaction products from the oxidation of neat 1-butanol indicate that 1-butanol is consumed mainly through H-atom abstraction. Among the H-atom abstraction reactions, it is observed that the H-atom abstraction from the {alpha}-carbon of 1-butanol is particularly favored. The investigation on the oxidation of the mixture of n-heptane/1-butanol showed that the oxidation of 1-butanol is facilitated at low temperatures through the radical pool generated from the oxidation of n-heptane. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comparison of ethanol and butanol as oxygenates using a direct-injection, spark-ignition (DISI) engine.

This study was designed to evaluate a 'what if' scenario in terms of using butanol as an oxygenate in place of ethanol in an engine calibrated for gasoline operation. No changes to the stock engine calibration were performed for this study. Combustion analysis, efficiency, and emissions of pure gasoline, 10% ethanol, and 10% butanol blends in a modern direct-injection four-cylinder spark-ignition engine were analyzed. Data were taken at engine speeds of 1000 rpm up to 4000 rpm with load varying from 0 N m (idle) to 150 N m. Relatively minor differences existed between the three fuels for the combustion characteristics such as heat release rate, 50% mass fraction burned, and coefficient of variation in indicated mean effective pressure at low and medium engine loads. However at high engine loads the reduced knock resistance of the butanol blend forced the engine control unit to retard the ignition timing substantially, compared with the gasoline baseline and, even more pronounced, compared with the ethanol blend. Brake specific volumetric fuel consumption, which represented a normalized volumetric fuel flow rate, was lowest for the gasoline baseline fuel due to the higher energy density. The 10% butanol blend had a lower volumetric fuel consumption compared with the ethanol blend, as expected, based on energy density differences. The results showed little difference in regulated emissions between 10% ethanol and 10% butanol. The ethanol blend produced the highest peak specific NO{sub x} due to the high octane rating of ethanol and effective antiknock characteristics. Overall, the ability of butanol to perform equally as well as ethanol from an emissions and combustion standpoint, with a decrease in fuel consumption, initially appears promising. Further experiments are planned to explore the full operating range of the engine and the potential benefits of higher blend ratios of butanol.

02 PETROLEUM↗

Discovery and implementation of a novel pathway for n-butanol production via 2-oxoglutarate

Background: One of the European Union directives indicates that 10% of all fuels must be bio-synthesized by 2020. In this regard, biobutanol—natively produced by clostridial strains—poses as a promising alternative biofuel. One possible approach to overcome the difculties of the industrial exploration of the native producers is the expression of more suitable pathways in robust microorganisms such as Escherichia coli. The enumeration of novel pathways is a powerful tool, allowing to identify non-obvious combinations of enzymes to produce a target compound. Results: This work describes the in silico driven design of E. coli strains able to produce butanol via 2-oxoglutarate by a novel pathway. This butanol pathway was generated by a hypergraph algorithm and selected from an initial set of 105,954 diferent routes by successively applying diferent flters, such as stoichiometric feasibility, size and novelty. The implementation of this pathway involved seven catalytic steps and required the insertion of nine heterologous genes from various sources in E. coli distributed in three plasmids. Expressing butanol genes in E. coli K12 and cultivation in High-Density Medium formulation seem to favor butanol accumulation via the 2-oxoglutarate pathway. The maximum butanol titer obtained was 85±1 mg L-1 by cultivating the cells in bioreactors. Conclusions: In this work, we were able to successfully translate the computational analysis into in vivo applications, designing novel strains of E. coli able to produce n-butanol via an innovative pathway. Our results demonstrate that enumeration algorithms can broad the spectrum of butanol producing pathways. This validation encourages further research to other target compounds.

09 BIOMASS FUELS↗

Metabolic engineering of Thermoanaerobacterium saccharolyticum for n-butanol production

The thermophilic anaerobe Thermoanaerobacterium saccharolyticum JW/SL-YS485 was investigated as a host for n-butanol production. A systematic approach was taken to demonstrate functionality of heterologous components of the clostridial n-butanol pathway via gene expression and enzymatic activity assays in this organism. Subsequently, integration of the entire pathway in the wild-type strain resulted in n-butanol production of 0.85 g/L from 10 g/L xylose, corresponding to 21% of the theoretical maximum yield. We were unable to integrate the n-butanol pathway in strains lacking the ability to produce acetate, despite the theoretical overall redox neutrality of n-butanol formation. However, integration of the n-butanol pathway in lactate deficient strains resulted in n-butanol production of 1.05 g/L from 10 g/L xylose, corresponding to 26% of the theoretical maximum.

Bhandiwad, Ashwini↗

Increasing bacterial tolerance and metabolism of the biofuel, n-butanol using community-level evolution and functional genomics

n-butanol is a strong biofuel candidate since it is more energy dense and less volatile than ethanol. The bottleneck for industrial production of biobutanol is the toxicity; most microbes cannot survive about 1.5% v/v. We propose to develop bioremediation capability along with the biofuel technology to mitigate future spills and their consequences. Two main approaches were used: community-level screening and functional genomics, both followed by directed evolution to increase biodegradation. For the first approach, a bacterial library from historic bioremediation projects was re-isolated and re-characterized, then mixed into artificial communities of ~20 strains (“master mixes”). These master mixes were screened for tolerance to butanol, and continuously exposed to increase tolerance. Promising communities were then tested for growth with butanol as the sole carbon source. Secondly, we looked for bacteria with alcohol dehydrogenase enzymes and looked to increase butanol metabolism. We found that the tolerance for n-butanol may be improved with repeated exposure, but it was difficult to switch from tolerance to metabolism. Bacterial community dynamics may be influenced by n-butanol concentration, and there was putative butanol metabolism found with both research approaches.

09 BIOMASS FUELS↗

Development of a High Temperature Microbial Fermentation Processfor Butanol Production

Transforming renewable biomass into cost competitive high-performance biofuels and bioproducts is key to US energy security. Butanol production by microbial fermentation and chemical conversion to polyolefins, elastomers, drop-in jet or diesel fuel, and other chemicals is a promising solution. A high temperature fermentation process can facilitate butanol recovery up to 40%, by using gas stripping. Other benefits of fermentation at high temperatures are optimal hydrolysis rates in the saccharification of biomass which leads to maximized butanol production, decrease in energy costs associated with reactor cooling and capital cost associated with reactor design, and a decrease in contamination and cost for maintaining a sterile environment. Butanol stripping at elevated temperatures gives higher butanol production through constant removal and continuous fermentation. We describe methods used in an attempt to genetically prepare Geobacillus caldoxylosiliticus for insertion of a butanol pathway. Methods used were electroporation of electrocompetent cells, ternary conjugation with E. coli, and protoplast fusion.

09 BIOMASS FUELS↗

Hydrogenation of butanal over silica-supported Shvo’s catalyst and its use for the gas-phase conversion of propene to butanol via tandem hydroformylation and hydrogenation

The objective of the present study was to develop a heterogeneous catalyst for the hydrogenation of butanal that could function in the presence of CO and propene and, hence, could be used in a tandem reactor to enable the gas-phase conversion of propene and synthesis gas to butanol. To this end, we investigated the activity of silica-supported Shvo's catalyst (Shvo/SiO 2 ) for the gas-phase hydrogenation of butanal. Experiments were performed to determine the kinetics of n- and iso-butanal hydrogenation. The apparent activation energies and the apparent partial pressure dependencies of n - and iso-butanal, H 2 , and CO on the rates of n- and iso-butanol formation were determined. A mechanism for butanal hydrogenation was proposed to rationalize the observed kinetics and some of the reaction intermediates were observed by in situ infrared and 31 P MAS NMR spectroscopy. It was found that Shvo/SiO 2 was inhibited by SX (SX = sulfoxanthphos) and CO, and is inactive for alkene hydrogenation. The tandem catalytic conversion of propene and synthesis gas to butanol was then carried out using a SX-Rh supported ionic liquid phase (SILP) catalyst to promote the hydroformylation of propene to butanal and Shvo/SiO 2 to promote the hydrogenation of butanal to butanol. The rate expressions describing the kinetics of each of the catalysts were then used to predict operating conditions required to achieve high conversion of propene to butanol. Under the most favorable conditions examined (H 2 /CO = 10), an overall yield of 13% to butanol was achieved with 15% propene conversion and 90% aldehyde conversion at a temperature of 413 K.

Butanal↗

Experimental and computational investigation of the influence of iso -butanol on autoignition of n -decane and n -heptane in non-premixed flows

Experimental and computational investigation is carried out to elucidate the influence of iso-butanol on critical conditions of autoignition of n-decane and n-heptane. The counterflow configuration is employed. In this configuration an axisymmetric stream of air is directed over the surface of an evaporating pool of a liquid fuel. A stagnation plane is established. The temperature of the air is increased until autoignition is achieved in the mixing layer in the vicinity of the stagnation plane. The temperature of the air stream at autoignition, T ig , is measured at various values of the strain rate, which is defined as the axial gradient of the axial component of the flow velocity at the stagnation plane. Fuels tested are n-decane, n-heptane, iso-butanol and various mixtures of n-decane/iso-butanol and n-heptane/iso-butanol. Kinetic modeling is carried out using the recently updated version of the comprehensive CRECK chemical-kinetic mechanism. Critical conditions of autoignition are predicted for all fuels and fuel mixtures and the results are compared with the measurements. Computations show that low-temperature chemistry plays a significant role in promoting autoignition of n-decane and n-heptane, and the influence of low-temperature chemistry decreases with increasing strain rates because there is insufficient residence for the low-temperature reactions to take place. Experimental data and numerical simulations show that addition of even small amounts of iso-butanol to n-decane or n-heptane increases the value of T ig at low strain rates indicating that iso-butanol strongly inhibits the low-temperature chemistry of n-decane and n-heptane. Furthermore, the simulations show that when iso-butanol is present in the liquid fuel, only a small amount of n-decane is available in the gas phase and its low concentration cannot effectively sustain the low temperature degenerate branching oxidation process. Here, predicted flame structures show that the peak values of mole fraction of ketohydroperoxide are significantly reduced when iso-butanol is added to n-decane indicating that the kinetic pathway to low temperature ignition is blocked. This observation is confirmed from sensitivity analysis.

42 ENGINEERING↗