Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BOUNDARY LAYER FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Computer program to calculate three-dimensional boundary layer flows over wings with wall mass transfer

A system of computer programs for calculating three dimensional transonic flow over wings, including details of the three dimensional viscous boundary layer flow, was developed. The flow is calculated in two overlapping regions: an outer potential flow region, and a boundary layer region in which the first order, three dimensional boundary layer equations are numerically solved. A consistent matching of the two solutions is achieved iteratively, thus taking into account viscous-inviscid interaction. For the inviscid outer flow calculations, the Jameson-Caughey transonic wing program FLO 27 is used, and the boundary layer calculations are performed by a finite difference boundary layer prediction program. Interface programs provide communication between the two basic flow analysis programs. Computed results are presented for the NASA F8 research wing, both with and without distributed surface suction.

Mclean, J. D.↗
NASA NTRS1977

Turbulence measurements in axisymmetric supersonic boundary layer flow in adverse pressure gradients

Mean flow and turbulence measurements are presented for adiabatic compressible turbulent boundary layer flow in adverse pressure gradients. The gradients were induced on the wall of an axially symmetric wind tunnel by contoured centerbodies mounted on the wind tunnel centerline. The boundary layer turbulence downstream of a boundary layer bleed section in a zero pressure gradient was also examined. The measurements were obtained using a constant temperature hot-wire anemometer. The adverse pressure gradients were found to significantly alter the turbulence properties of the boundary layer. With flow through the bleed holes there was a measureable decrease in the rms longitudinal velocity fluctuations near the wall and the turbulent shear stress in the boundary layer was reduced.

Gootzait, E.↗
NASA NTRS2016

Experimental Investigation of Subsonic Turbulent Boundary Layer Flow Over a Wall-Mounted Axisymmetric Hill

An important goal for modern fluid mechanics experiments is to provide datasets which present a challenge for Computational Fluid Dynamics simulations to reproduce. Such "CFD validation experiments" should be well-characterized and well-documented, and should investigate flows which are difficult for CFD to calculate. It is also often convenient for the experiment to be challenging for CFD in some aspects while simple in others. This report is part of the continuing documentation of a series of experiments conducted to characterize the flow around an axisymmetric, modified-cosine-shaped, wall-mounted hill named "FAITH" (Fundamental Aero Investigates The Hill). Computation of this flow is easy in some ways - subsonic flow over a simple shape - while being complex in others - separated flow and boundary layer interactions. The primary set of experiments were performed on a 15.2 cm high, 45.7 cm base diameter machined aluminum model that was tested at mean speeds of 50 m/s (Reynolds Number based on height = 500,000). The ratio of model height to boundary later height was approximately 3. The flow was characterized using surface oil flow visualization, Cobra probe to determine point-wise steady and unsteady 3D velocities, Particle Image Velocimetry (PIV) to determine 3D velocities and turbulence statistics along specified planes, Pressure Sensitive Paint (PSP) to determine mean surface pressures, and Fringe Imaging Skin Friction (FISF) to determine surface skin friction magnitude and direction. A set of pathfinder experiments were also performed in a water channel on a smaller scale (5.1 cm high, 15.2 cm base diameter) sintered nylon model. The water channel test was conducted at a mean test section speed of 3 cm/s (Reynolds Number of 1500), but at the same ratio of model height to boundary layer thickness. Dye injection from both the model and an upstream rake was used to visualize the flow. This report summarizes the experimental set-up, techniques used, and data acquired. It also describes some details of the dataset that is being constructed for use by other researchers, especially the CFD community.

fluid machanics cfd validation wind tunnel↗
NASA NTRS1985

Drag characteristics of unsteady, perturbed boundary layer flows

A series of time-dependent numerical computations have been performed for the flow of an unsteady boundary layer over an embedded cavity, which is aligned normal to the flow direction. The unsteady flow is the result of the imposition of a Stuart vortex, at the inflow boundary of the computational domain, onto an otherwise unperturbed two-dimensional laminar boundary layer flow. This produces a strongly vortical, but spatially monochromatic, motion at inflow which is allowed to evolve downstream through the time-dependent numerical solution of appropriate conservation equations. As the imposed vortex evolves over the solid boundary, a weaker induced vortical motion is produced and together these perturbing motions interact with the fluid motion in the embedded cavity. An analysis of the pertinent dynamic variables as well as the time-dependent drag characteristics for this type of non-planar geometry is performed; with particular emphasis on the relative contribution of both pressure drag and frictional drag at various times in the evolution process.

Gatski, T. B.↗
NASA NTRS1977

Turbulence modeling of shock separated boundary-layer flows

Computations of transonic and hypersonic shock-separated boundary-layer flows using zero-equation (algebraic), one-equation (kinetic energy), and two-equation (kinetic energy plus length scale) turbulence eddy viscosity models are described and compared with measurements. The computations make use of a new Navier-Stokes computer algorithm that has reduced computing times by one to two orders of magnitude. The algorithm, and how the turbulence models are incorporated into it, are described. Results for the transonic flow show that the unmodified one-equation model is superior to the zero-equation model in skin-friction predictions. For the hypersonic flow, a highly modified one-equation model that accurately predicts surface pressure and heat transfer is described. Preliminary two-equation model results are also presented.

Coakley, T. J.↗
NASA NTRS1993

Measurements Of Turbulence In Boundary-Layer Flows

Report describes experimental study of turbulence in two boundary-layer flows with adverse gradients of pressure. Flows produced about cylinder oriented with axis along that of low-speed wind tunnel of rectangular cross section. Fluctuations of velocities analyzed with respect to various mathematical models of turbulence.

Driver, David M.↗
NASA NTRS1977

Numerical investigation of turbulence models for shock separated boundary-layer flows

Numerical solutions of the Navier-Stokes equations for shock separated turbulent boundary-layer flows are presented. Several turbulence models are investigated and assessed by their ability to predict the physical phenomena associated with two extensively documented experiments. The experimental flows consist of shock-wave boundary-layer interactions in axisymmetric internal and external geometries at Mach numbers of 1.5 and 7, respectively. Algebraic and one-equation eddy viscosity models are used to describe the Reynolds shear stress. Calculated values of skin friction, wall pressure distribution, kinetic energy of turbulence, and heat transfer are compared with measurements.

Viegas, J. R.↗
NASA NTRS1995

Active control of panel vibrations induced by a boundary layer flow

The problems of active and passive control of sound and vibration has been investigated by many researchers for a number of years. However, few of the articles are concerned with the sound and vibration with flow-structure interaction. Experimental and numerical studies on the coupling between panel vibration and acoustic radiation due to flow excitation have been done by Maestrello and his associates at NASA/Langley Research Center. Since the coupled system of nonlinear partial differential equations is formidable, an analytical solution to the full problem seems impossible. For this reason, we have to simplify the problem to that of the nonlinear panel vibration induced by a uniform flow or a boundary-layer flow with a given wall pressure distribution. Based on this simplified model, we have been able to consider the control and stabilization of the nonlinear panel vibration, which have not been treated satisfactorily by other authors. Although the sound radiation has not been included, the vibration suppression will clearly reduce the sound radiation power from the panel. The major research findings are presented in three sections. In section two we describe results on the boundary control of nonlinear panel vibration, with or without flow excitation. Sections three and four are concerned with some analytical and numerical results in the optimal control of the linear and nonlinear panel vibrations, respectively, excited by the flow pressure fluctuations. Finally, in section five, we draw some conclusions from research findings.

Chow, Pao-Liu↗
NASA NTRS1959

Some Basic Aspects of Magnetohydrodynamic Boundary-Layer Flows

An appraisal is made of existing solutions of magnetohydrodynamic boundary-layer equations for stagnation flow and flat-plate flow, and some new solutions are given. Since an exact solution of the equations of magnetohydrodynamics requires complicated simultaneous treatment of the equations of fluid flow and of electromagnetism, certain simplifying assumptions are generally introduced. The full implications of these assumptions have not been brought out properly in several recent papers. It is shown in the present report that for the particular law of deformation which the magnetic lines are assumed to follow in these papers a magnet situated inside the missile nose would not be able to take up any drag forces; to do so it would have to be placed in the flow away from the nose. It is also shown that for the assumption that potential flow is maintained outside the boundary layer, the deformation of the magnetic lines is restricted to small values. The literature contains serious disagreements with regard to reductions in heat-transfer rates due to magnetic action at the nose of a missile, and these disagreements are shown to be mainly due to different interpretations of reentry conditions rather than more complicated effects. In the present paper the magnetohydrodynamic boundary-layer equation is also expressed in a simple form that is especially convenient for physical interpretation. This is done by adapting methods to magnetic forces which in the past have been used for forces due to gravitational or centrifugal action. The simplified approach is used to develop some new solutions of boundary-layer flow and to reinterpret certain solutions existing in the literature. An asymptotic boundary-layer solution representing a fixed velocity profile and shear is found. Special emphasis is put on estimating skin friction and heat-transfer rates.

Hess, Robert V.↗
NASA NTRS1978

Thermal response behavior of boundary-layer flows

This paper presents an approximate, but general, analysis for the thermal response behavior of incompressible, constant property, laminar boundary layer flow over a smooth object of arbitrary shape. It encompasses the classic time-dependent Leveque problem as its special case. Comparisons with available data show that, for fluids with Prandtl number of the order of unity or larger, this analytical solution is able to provide reasonably accurate results for most engineering applications. Under certain restrictive conditions, it can also be used to predict the thermal response of a compressible boundary layer flow.

Lin, F. N.↗
NASA NTRS1998

Active Control of Panel Vibrations Induced by a Boundary Layer Flow

In recent years, active and passive control of sound and vibration in aeroelastic structures have received a great deal of attention due to many potential applications to aerospace and other industries. There exists a great deal of research work done in this area. Recent advances in the control of sound and vibration can be found in the several conference proceedings. In this report we will summarize our research findings supported by the NASA grant NAG-1-1175. The problems of active and passive control of sound and vibration has been investigated by many researchers for a number of years. However, few of the articles are concerned with the sound and vibration with flow-structure interaction. Experimental and numerical studies on the coupling between panel vibration and acoustic radiation due to flow excitation have been done by Maestrello and his associates at NASA/Langley Research Center. Since the coupled system of nonlinear partial differential equations is formidable, an analytical solution to the full problem seems impossible. For this reason, we have to simplify the problem to that of the nonlinear panel vibration induced by a uniform flow or a boundary-layer flow with a given wall pressure distribution. Based on this simplified model, we have been able to study the control and stabilization of the nonlinear panel vibration, which have not been treated satisfactorily by other authors. The vibration suppression will clearly reduce the sound radiation power from the panel. The major research findings will be presented in the next three sections. In Section II we shall describe our results on the boundary control of nonlinear panel vibration, with or without flow excitation. Section III is concerned with active control of the vibration and sound radiation from a nonlinear elastic panel. A detailed description of our work on the parametric vibrational control of nonlinear elastic panel will be presented in Section IV. This paper will be submitted to the Journal of Acoustic Society of America for publication.

Chow, Pao-Liu↗
NASA NTRS1976

Turbulence measurements in axisymmetric supersonic boundary layer flow in adverse pressure gradients

Measurements have been made of the mean-flow and turbulence properties in adiabatic turbulent boundary layer flows subjected to adverse pressure gradients. In the freestream region upstream of the adverse pressure gradient the Mach number was 3.86, the unit Reynolds number 5.3 million per foot. The boundary layer developed on the wall of an axisymmetric nozzle and straight test section. The pressure gradients at the test section wall were induced by contoured centerbodies mounted on the wind tunnel centerline. The flow under study simulated that which might be found in an axially symmetric engine inlet of a supersonic aircraft. The results obtained have shown good agreement to exist between the measured normalized turbulent velocity fluctuations and the results from other recent investigations of compressible boundary layers.

Gootzait, E.↗
NASA NTRS1993

On the accurate prediction of the wall-normal velocity in compressible boundary-layer flow

A method for predicting the wall-normal velocity in compressible boundary layer flow is presented which is the extension of the fully implicit, spectral collocation method developed by Pruett and Streett (1991). The spectrally accurate method under consideration is capable of extracting the wall-normal velocity from the transformation from the physical plane to a computational plane, without interpolation, leaving the continuity equation free as a check on the quality of the solution. When used in conjunction with a highly accurate spectral collocation method for the compressible boundary-layer equations, the method gives a discrete solution which satisfies the continuity equation nearly to machine precision.

Pruett, C. D.↗
NASA NTRS1971

Laminar or turbulent boundary-layer flows of perfect gases or reacting gas mixtures in chemical equilibrium

Turbulent boundary layer flows of non-reacting gases are predicted for both interal (nozzle) and external flows. Effects of favorable pressure gradients on two eddy viscosity models were studied in rocket and hypervelocity wind tunnel flows. Nozzle flows of equilibrium air with stagnation temperatures up to 10,000 K were computed. Predictions of equilibrium nitrogen flows through hypervelocity nozzles were compared with experimental data. A slender spherically blunted cone was studied at 70,000 ft altitude and 19,000 ft/sec. in the earth's atmosphere. Comparisons with available experimental data showed good agreement. A computer program was developed and fully documented during this investigation for use by interested individuals.

Anderson, E. C.↗
NASA NTRS1973

The use of Levy-Lees variables in three-dimensional boundary-layer flows

A method for solving a general class of three-dimensional boundary layer flows is developed. In the development, Levy-Lees variables are extended to three dimensions and equations are placed in these similarity variables. An implicit finite difference scheme which is stable for negative transverse velocities is used to solve these equations. The method developed is applied to obtain solutions for sharp and spherically blunted circular cones at angle of attack. Longitudinal and transverse distributions are presented for these cases. Good agreement is found with the results obtained by other numerical schemes and the experimental data of Tracy, for sharp circular cones at angle of attack. For spherically blunted cones at angle of attack, the results are in good agreement with axisymmetric sphere results up to the region where spherical symmetry holds.

Vatsa, V. N.↗
NASA NTRS1973

Some problems of the calculation of three-dimensional boundary layer flows on general configurations

An accurate solution of the three-dimensional boundary layer equations over general configurations such as those encountered in aircraft and space shuttle design requires a very efficient, fast, and accurate numerical method with suitable turbulence models for the Reynolds stresses. The efficiency, speed, and accuracy of a three-dimensional numerical method together with the turbulence models for the Reynolds stresses are examined. The numerical method is the implicit two-point finite difference approach (Box Method) developed by Keller and applied to the boundary layer equations by Keller and Cebeci. In addition, a study of some of the problems that may arise in the solution of these equations for three-dimensional boundary layer flows over general configurations.

Cebeci, T.↗