Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Atomic fine structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Local rare-earth dopant structure in a complex-oxide/semiconductor heterojunction: Molecular beam epitaxy grown Yb-doped SrTiO3 on Si(001)

We have investigated the structural and electronic properties of Yb-doped SrTiO3/Si(001) grown by molecular beam epitaxy. Other rare-earth donor dopants that result in n-type conductivity typically substitute for Sr at the A-sites in the perovskite lattice. In contrast, Yb has been found to substitute predominantly for Ti at the perovskite B-sites based on data from atomically resolved scanning transmission electron microscopy and spectroscopy, as well as extended x-ray absorption fine structure. Yb exhibits two distinct charge states as determined by x-ray absorption spectroscopy and associated modeling, +2.7 and +2.1. These aliovalent substitutional dopants are compensated by donor electrons from oxygen vacancies that form during epitaxial film growth. An atom beam flux mismatch was present during film depositions because it was assumed that Yb would occupy A-sites, leading to a flux matching formula given by Yb + Sr = Ti. However, the formation of YbTi rather than YbSr results in Sr vacancies and extraneous (i.e. non-lattice) Ti atoms in the films, or on the film surfaces. The presence of these defects, together with oxygen vacancies, leads to deep-level electron traps that were detected by resonant photoemission and much higher sheet resistance than that associated with, for instance, La-doped films.

Chambers, Scott A. (ORCID:000000025415043X)↗

A Mechanistic Understanding of Nonclassical Crystal Growth in Hydrothermally Synthesized Sodium Yttrium Fluoride Nanowires

Sodium yttrium fluoride (NaYF 4 ) is an important upconverting material with many potential uses in chemistry, materials science, and biology, which can be synthesized hydrothermally in both cubic (α) and hexagonal (β) crystallographic polymorphs. Understanding the mechanisms underlying the phase conversion between the cubic and hexagonal polymorphs is of great interest to help inform future synthetic efforts, for example in the design of atomically precise quantum materials with well-defined sizes and morphologies. In this work, we use a combination of analytical transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), powder X-ray diffraction (XRD), in situ liquid cell TEM, atom probe tomography (APT), and extended X-ray absorption fine structure (EXAFS) measurements to show that the hexagonal NaYF 4 nanowires form through a nonclassical crystal growth mechanism involving the formation and subsequent oriented attachment of mesocrystals consisting of cubic (α) phase units. Additionally, EXAFS measurements suggest that substitutional Yb 3+ point defects within NaYF 4 are distributed evenly throughout the crystal lattice without clustering and also that they may exhibit selective substitution into one of the two possible trivalent yttrium sites in the unit cell for hydrothermally synthesized β-NaYF 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Composition dependence of atomic order in strain-relaxed, metastable GeSn alloys

Extended x-ray absorption fine structure (EXAFS) measurements of single-crystal Ge/GeSn radial heterostructure nanowires are used to examine the effects of composition on both short-range order (SRO) and longer-range disorder in GeSn alloys. GeSn has prompted significant interest because it can achieve a direct band gap for sufficient Sn concentrations beyond the equilibrium solid solubility limit in an all-group IV system. Short-range order in this material is particularly interesting as it has been predicted to affect the band gap independent of average composition or strain effects. By independently controlling the Sn composition and GeSn thickness during chemical vapor deposition of misfitting GeSn shells around ultrathin, elastically compliant, Ge core nanowires, the elastic misfit strain in the GeSn is minimized for Sn compositions over the studied range ≈Ge 0.96 Sn 0.04 to Ge 0.88 Sn 0.12 . The degree of SRO was found to decrease with increasing Sn composition. Additionally, damping of the EXAFS signal was observed as the Sn content increased, particularly for increasingly distant atomic shells about the absorbing atom, even for scattering paths not involving Sn atoms. This result is quantified as an increase in the mean-squared relative displacement parameters of the shells. These measurements reveal the accommodation of local strain due to the presence of the highly size-mismatched Sn atoms in the Ge diamond cubic lattice (≈14%), which may have effects on the band structure of the material in addition to the influence of short-range atomic order. Comparison among the nanowire samples allows for calculation of the topological rigidity parameter, a ∗∗ , for the first-neighbor bond lengths. Furthermore, these exhibit chemically distinct values for Ge-Ge, Ge-Sn, and Sn-Sn, and they are consistent with the value a ∗∗ = 0.75 ± 0.07 confirming the general applicability of the model to alloys with both large amounts of natural misfit strain and the potential for short-range order.

Crystal structure Semiconductors Transmission elec↗

Optical design and efficiency measurement of an extreme ultraviolet high-resolution spectrometer for unresolved transition array research

Understanding the structures of the unresolved transition array (UTA) observed in extreme ultraviolet (EUV) spectra from many-electron atoms is crucial for various applications, including fusion science and nanolithography. Here, to measure the fine structure of the UTA from tungsten and tin at around 5 and 13.5 nm at the Tokyo electron beam ion trap, we developed a high-resolution EUV spectrometer. The designed spectrometer achieves a resolving power of λ/dλ > 5000 at 5 and 13.5 nm. The fabricated large-area grating was experimentally examined at beamline BL5B of the UVSOR synchrotron facility to evaluate the diffraction efficiencies and their variation across the ruled area. The measured diffraction efficiencies are 0.65% ± 0.07% at 5 nm (second order) and 7.9% ± 0.2% at 13.5 nm (first order). The variation in the diffraction efficiency across the ruled area is 2.2%, 13.6%, and 10.0% in zeroth, first, and second order diffractions, respectively. The discrepancies in diffraction efficiencies between the experiments and the calculations were 5.2%, 29%, and 35% for the zeroth, first, and second diffraction orders, respectively.

47 OTHER INSTRUMENTATION↗

Vibrational response and temperature of shock-compressed Pt: In situ extended x-ray absorption fine structure measurements to 325 GPa

Single pulse (~100 ps duration) extended x-ray absorption fine structure (EXAFS) measurements were obtained in laser shocked Pt to examine atomic vibrational properties and to determine temperatures for shock pressures from 72-325 GPa. Pt x-ray absorption spectra were recorded while a planar shock wave was propagating through the Pt sample. The absorption spectrum corresponding to the shocked Pt was obtained by subtracting the ambient Pt contribution from the measured absorption spectrum. Fits to the shocked state EXAFS data provided Pt lattice parameters consistent with the known Pt Hugoniot and the mean squared relative displacements (MSRDs) for nearest neighbor Pt atoms. Pt temperatures in the shocked state, estimated from the MSRDs using the correlated Debye model and correlated Einstein models, were consistent with both the Hugoniot temperatures calculated by integration along the Hugoniot and with the Hugoniot temperatures from published first-principles calculations. However, the agreement between the Hugoniot temperatures from EXAFS measurements and the calculated Hugoniot temperatures is not as good above 200 GPa, likely due to anharmonic effects. Furthermore, the present results demonstrate that single-pulse synchrotron EXAFS measurements in laser-shocked solids are useful for quantitative temperature determination and for examination of vibrational properties, including anharmonicity, at extreme pressure-temperature conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transformation of atomically dispersed platinum in SAPO-37 into platinum clusters: catalyst for ethylene hydrogenation

Atomically dispersed supported platinum catalysts were synthesized by the reaction of Pt(acac) 2 (acac = acetylacetonato) with the silicoaluminophosphate molecular sieve SAPO-37, with infrared spectra showing that the reaction involved SAPO OH groups. Extended X-ray absorption fine structure (EXAFS) spectra show that, after heating in air to 623 K, each platinum atom on average was bonded to approximately two oxygen atoms of the SAPO support, with no evidence of platinum clusters. X-ray absorption near edge spectra (XANES) indicate a platinum formal oxidation state of approximately +2. Here, these supported mononuclear species lacked catalytic activity for ethylene hydrogenation at 1 bar and room temperature, but activity arose during catalysis in a once-through flow reactor/X-ray absorption spectroscopy cell, as the XANES white line intensity decreased, indicating reduction of the platinum, and the EXAFS-determined Pt–Pt coordination number (CN) increased from essentially zero to 2.7 ± 0.5 after 2 h, indicating the formation of platinum clusters of only a few atoms each. The data indicate the almost instantaneous formation of the clusters and identify them as the catalytically active species. Subsequent exposure of the catalyst to ethylene as in situ EXAFS and XANES data were recorded led to a decrease in the Pt–Pt coordination number to 1.6 ± 0.3 and an increase in the white line intensity, indicating partial oxidative fragmentation of the clusters by ethylene. Platinum clusters in SAPO-37 formed in separate experiments by exposure to H 2 prior to catalysis were also catalytically active for ethylene hydrogenation. Here, the data thus show how to dial in the catalytic activity by forming platinum clusters by exposure of mononuclear platinum to H 2 and how to dial back the activity by oxidative fragmentation of the clusters by reaction with ethylene, all under mild conditions; the ethylene : H 2 ratio of the reactant gas determines the average platinum nuclearity and thus the catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ligand-coordination effects on the selective hydrogenation of acetylene in single-site Pd-ligand supported catalysts

The selective hydrogenation of acetylene to ethylene is a critical step in the synthesis of polyethylenes. Achieving high conversion to ethylene without over-hydrogenation to ethane is a challenge that requires control of the transition metal site, which we achieve through a ligand-coordinated supported catalyst (LCSC) strategy. Using Pd catalysts coordinated to 1,10-phenanthroline-5,6-dione (PDO) ligands on CeO2 supports, we have discovered that the reaction selectivity depends strongly on the ligand:metal ratio with higher selectivity when more ligand is present in the catalyst. Catalyst structure was examined by extended X-ray absorption fine structure spectroscopy, transmission electron microscopy, and CO adsorption, which indicate single-atom character of the Pd. The ligand:metal ratio is determined by Xray photoelectron spectroscopy measurements and correlated with hydrogenation reactions under steady-state flow conditions to examine trends in hydrogenation activity and selectivity. Those trends can be better understood by density functional theory calculations that indicate hydrogen binding on the ligand to guide reaction selectivity toward the desired ethylene hydrogenation product. Here these results demonstrate the importance of considering the dynamic character of LCSCs and inform the design of future single-site heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalous Behavior in the Atomic Structure of Nb$^{3}$Sn under High Pressure

In the present study, the local atomic structure of a Nb3Sn superconductor sample has been probed by X-ray absorption fine structure (XAFS) as a function of hydrostatic pressure (from ambient up to 26 GPa) using a diamond anvil cell set-up. The analysis of the Nb-K edge extended X-ray absorption fine structure (EXAFS) data was carried out combining standard multi shell structural refinement and reverse Monte Carlo method to provide detailed in situ characterization of the pressure-induced evolution of the Nb local structure in Nb3Sn. The results highlight a complex evolution of Nb chains at the local atomic scale, with a peculiar correlated displacement of Nb–Nb and Nb–Nb–Nb configurations. Such a local effect appears related to anomalies evidenced by X-ray diffraction in other superconductors belonging to the same A15 crystallographic structure.

36 MATERIALS SCIENCE↗

PbI 2 Nanocrystal Growth by Atomic Layer Deposition from Pb(tmhd) 2 and HI

Atomic layer deposition (ALD) allows for fine control over the thickness, stoichiometry, and structural defects of materials. ALD provides a suitable route to deposit lead halides, which can further be converted to perovskites for photovoltaics, photoemission, and photodetection, among other applications. Deposition of lead halides by ALD has already begun to be explored; however, the precursors used in published processes are highly hazardous, require expensive fabrication processes, or contain impurities that can jeopardize the optoelectronic properties of metal halide perovskites after conversion. In this work, we deposited lead iodide (PbI 2 ) by a facile ALD process involving only two readily accessible and low-cost precursors. PbI 2 nanocrystals were grown on soda-lime glass (SLG), silicon dioxide support grids, and silicon wafer substrates and provided the groundwork for further investigation into developing lead halide perovskite processes by ALD. Further, the ALD-grown PbI 2 was characterized by annular dark-field scanning transmission electron microscopy (ADF-STEM), atomic force microscopy (AFM), high resolution transmission electron microscopy (HRTEM), X-ray fluorescence (XRF), and X-ray photoemission spectroscopy (XPS), among other methods. This work presents the first step to synthesize lead halide perovskites with atomic control for applications such as interfacial layers in photovoltaics and for deposition in microcavities for lasing.

36 MATERIALS SCIENCE↗

Ultrahigh Oxygen Evolution Reaction Activity Achieved Using Ir Single Atoms on Amorphous CoO x Nanosheets

Developing efficient electrocatalysts for an oxygen evolution reaction (OER) is important for renewable energy storage. Here, we design high-density Ir single-atom catalysts supported by CoO x amorphous nanosheets (ANSs) for the OER. Experimental results show that Ir single atoms are anchored by abundant surface-absorbed O in CoO x ANSs. Ir single-atom catalysts possess ultrahigh mass activity that is 160-fold of commercial IrO 2 . The OER of IrCoO x ANSs reached a record low onset overpotential of less than 30 mV. In situ X-ray absorption spectroscopy reveals that Ir-O-Co pairs directly boosted the OER efficiency and enhanced the Ir stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Linearized Pair-Density Functional Theory with Spin–Orbit Coupling

Here, we include spin–orbit coupling (SOC) effects in linearized pair-density functional theory (L-PDFT), which is a multistate extension of multiconfiguration pair-density functional theory (MC-PDFT). Both 1-electron and 2-electron SOC integrals are computed using Breit-Pauli and Douglas–Kroll–Hess Hamiltonians in the atomic mean-field approximation. SO-L-PDFT removes the unphysical J-symmetry breaking observed in MC-PDFT. The accuracy of SO-L-PDFT is validated by calculations of zero-field splittings, fine-structure excitation energies, and low-energy excited-state spectra for a diverse group of atoms and molecules spanning the whole range of the periodic table, including atoms of groups 3, 11, and 13–17, the Ce 3+ and U 5+ ions, group 16 monohydrides, group 17 monoxides, lanthanide hexachlorides ([CeCl 6 ] 3− , [PrCl 6 ] 3− , and [NdCl 6 ] 3− ), actinyl ions ([UO 2 ] + , [NpO 2 ] 2+ ), and tricarbonatoactinyl complexes ([UO 2 (CO 3 ) 3 ] 5− , [NpO 2 (CO 3 ) 3 ] 4− ). We also compare the results to new spin–orbit-inclusive calculations by single-state and multistate multireference perturbation theory.

Hamiltonians↗

Binding energies, charge radii, spins, and moments: Odd-odd Ag isotopes and discovery of a new isomer

We report on the masses and hyperfine structure of ground and isomeric states in 114,116,118,120 Ag isotopes, measured with the phase-imaging ion-cyclotron-resonance technique (PI-ICR) with the JYFLTRAP mass spectrometer and the collinear laser spectroscopy beamline at the Ion Guide Isotope Separator On-Line facility, Jyväskylä, Finland. We measured the masses and excitation energies, electromagnetic moments, and charge radii, and firmly established the nuclear spins of the long-lived states. A new isomer was discovered in 118 Ag and the half-lives of 118 Ag long-lived states were reevaluated. We unambiguously pinned down the level ordering of all long-lived states, placing the inversion of the 𝐼 = 0 − and 𝐼 = 4 + states at 𝐴 = 118 (𝑁 = 71). As a result, we compared the electromagnetic moments of each state to empirical single-particle moments to identify the dominant configuration where possible.

90 ≤ A ≤ 149↗

Influence of gadolinium doping on structural, optical, and electronic properties of polymeric graphitic carbon nitride

Polymeric graphitic carbon nitride (gCN) materials have received great attention in the fields of photo and electrocatalysis due to their distinct properties in metal-free systems with high physicochemical stability. Nevertheless, the activity of undoped gCN is limited due to its relatively low specific surface area, low conductivity, and poor dispersibility. Doping Gd atoms in a gCN matrix is an efficient strategy to fine-tune its catalytic activity and its electronic structure. Herein, the influence of various wt% of gadolinium (Gd) doped in melon-type carbon nitride was systematically investigated. Gadolinium-doped graphitic carbon nitride (GdgCN) was synthesized by adding gadolinium nitrate to dicyandiamide during polymerization. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) results revealed that the crystallinity and the morphological properties are influenced by the % of Gd doping. Furthermore, X-ray photoelectron spectroscopy (XPS) studies revealed that the gadolinium ions bonded with nitrogen atoms. Complementary density functional theory (DFT) calculations illustrate possible bonding configurations of Gd ions both in bulk material and on ultrathin melon layers and provide evidence for the corresponding bandgap modifications induced by gadolinium doping.

36 MATERIALS SCIENCE↗

Local Structure of Sulfur Vacancies on the Basal Plane of Monolayer MoS 2

We report the nature of the S-vacancy is central to controlling the electronic properties of monolayer MoS 2 . Understanding the geometric and electronic structures of the S-vacancy on the basal plane of monolayer MoS 2 remains elusive. Here, operando S K-edge X-ray absorption spectroscopy shows the formation of clustered S-vacancies on the basal plane of monolayer MoS 2 under reaction conditions (H 2 atmosphere, 100–600 °C). First-principles calculations predict spectral fingerprints consistent with the experimental results. The Mo K-edge extended X-ray absorption fine structure shows the local structure as coordinatively unsaturated Mo with 4.1 ± 0.4 S atoms as nearest neighbors (above 400 °C in an H 2 atmosphere). Conversely, the 6-fold Mo–Mo coordination in the crystal remains unchanged. Electrochemistry confirms similar active sites for hydrogen evolution. The identity of the S-vacancy defect on the basal plane of monolayer MoS 2 is herein elucidated for applications in optoelectronics and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing fundamental constant oscillation in the Galactic Center with S-Star Spectroscopy

Astrophysical spectroscopy provides a powerful probe of spacetime variations of fundamental constants, as atomic and ionic emission and absorption lines depend sensitively on the fine-structure constant. In particular, coherent temporal oscillations induced by an ultralight scalar background produce characteristic, time-resolved signatures that can be robustly disentangled from intrinsic variability. In the Galactic Center, such scalar backgrounds can be substantially enhanced, either through the formation of dense scalar clouds powered by black hole rotational energy extraction or as ultralight scalar dark matter forming a soliton-like core. These scalar configurations generically induce oscillations of the fine-structure constant, with periods set by the scalar mass and spatial profiles determined by the scalar wavefunction and its coupling to the electromagnetic sector. We show that precise, time-resolved spectroscopy of S-stars orbiting the supermassive black hole Sgr A^* provides a sensitive test of these effects, enabling constraints on quadratic scalar-photon couplings in the exceptionally high boson-density environment of the Galactic Center.

Bai, Zhaoyu [Weizmann Inst.] (ORCID:00000002075815↗

Entanglement Generation in Weakly Driven Arrays of Multilevel Atoms via Dipolar Interactions

We investigate the driven-dissipative dynamics of multilevel atomic arrays interacting via dipolar interactions at subwavelength spacings. Unlike two-level atoms in the weakly excited regime, multilevel atoms can become strongly entangled. Here, the entanglement manifests as the growth of spin waves in the ground-state manifold and survives after turning off the drive. We propose the 2.9 μ⁢m transition between 3 P 2 ↔ 3 D 3 in 88 Sr with 389 nm trapping light as a platform to test our predictions and explore many-body physics with light-matter interactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multielectronic and multiatomic effects in the U O 4,5 x-ray absorption spectroscopy of uranium dioxide

In order to explain all of the spectral features observed in the U O 4,5 x-ray absorption spectrum of uranium dioxide (UO 2 ), it is necessary to include both multielectron effects and multiatomic effects. The 5d (core hole)-5f (electron) angular momentum coupling that gives rise to the giant resonance has been treated within ligand field density functional theory, and the electron scattering that generates the extended x-ray absorption fine structure has been included via the spectral simulation program FEFF: both within a UO 8 fluorite cluster picture. An atomic model is insufficient to explain all of the observed spectral features.

36 MATERIALS SCIENCE↗