Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Algal biomass”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Conceptual Basis and Techno-Economic Modeling for Integrated Algal Biorefinery Conversion of Microalgae to Fuels and Products (2019 NREL TEA Update: Highlighting Paths to Future Cost Goals via a New Pathway for Combined Algal Processing)

The report documents the conceptual basis for a new potential Combined Algal Processing design strategy which may allow more flexibility in accommodating different algal biomass feedstock compositions, by enabling upgrading of both protein and carbohydrates in a single step, without a strict requirement for either component to be in soluble or monomeric form, while maintaining effective wet lipid extraction techniques to enable high lipid recoveries. In light of previously-established constraints around algal biomass costs (which are significantly higher than lignocellulosic terrestrial biomass), the present CAP processing strategy reflects an integrated biorefinery concept producing both fuels and value-added chemical coproducts as a means to improve profitability and generate coproduct revenues to help drive down the minimum fuel selling price (MFSP) towards economically viable levels. Namely, this report highlights an integrated CAP biorefinery process and associated technical targets that would be required to achieve U.S. Department of Energy target MFSP goals of $2.5/gallon gasoline equivalent by 2030. This is accomplished by a process involving low-cost seasonal storage of algal biomass during high-growth seasons, rapid flash hydrolysis pretreatment of the biomass, solvent extraction of pretreated biomass, cleanup and fractionation of lipids into triglyceride and free fatty acid fractions, and a series of thermochemical conversion steps to upgrade carbohydrates and protein to hydrocarbon fuels. These steps include mild oxidative treatment (MOT), a process originally investigated at NREL for upgrading lignin, followed by catalytic ketonization and hydrotreating of MOT products to fuels. Isolated triglycerides are sent to a coproduct train, with the base case focused on upgrading to polyurethane foams as a high-value, high-market-volume coproduct.

09 BIOMASS FUELS↗
DOE OSTI2022

Enabling Production of Algal Biofuels by Techno-Economic Optimization of Co-Product Suites

Recent techno-economic analysis (TEA) has underscored that for algal biofuels to be cost competitive with petroleum fuels, co-products are necessary to offset the cost of fuel production. The co-product suite must scale with fuel production while also maximizing value from the non-fuel precursor components. The co-product suite also depends on algal biomass composition, which is highly dynamic and depends on environmental conditions during cultivation. Intentional shifts in composition during cultivation are often associated with reduced biomass productivity, which can increase feedstock production costs for the algae-based biorefinery. The optimal algae-based biorefinery configuration is thus a function of many factors. We have found that comprehensive TEA, which requires the construction of process models with detailed mass and energy balances, along with a complete accounting of capital and operating expenditures for a commercial-scale production facility, provides invaluable insight into the viability of a proposed biorefinery configuration. This insight is reflected in improved viability for one biorefining approach that we have developed over the last 10 years, namely, the Combined Algal Processing (CAP) approach. This approach fractionates algal biomass into carbohydrate-, lipid-, and protein-rich fractions, and tailors upgrading chemistry to the composition of each fraction. In particular, transitioning from valorization of only the lipids to a co-product suite from multiple components of high-carbohydrate algal biomass can reduce the minimum fuel selling price (MFSP) from more than $8/gallon of gasoline equivalent (GGE) to $2.50/GGE. This paper summarizes that progress and discusses several surprising implications in this optimization approach.

09 BIOMASS FUELS↗
DOE OSTI2025

Hydrothermal liquefaction of wastewater-grown algae to produce synthetic aviation fuel: A combined experimental study and techno-economic assessment

Large-scale algae farms may someday become a consistent source of biomass feedstock for biofuels. Near-term supplies of algal biomass are available at certain water resource recovery facilities as algae cultivation is used as a method for nutrient recovery from specific effluent streams. Algae grown as a service shifts the value to the service rather than its sole use as a feedstock, which could enable the provision of algal biomass at low to no cost to biofuel producers. Hydrothermal liquefaction (HTL) can readily upgrade wet feedstock slurries, such as algae, to produce a carbon-enriched biocrude. The HTL biocrude can be hydrotreated and distilled, producing a variety of distillate fuels, including synthetic aviation fuel (SAF). We present a pathway, showing the experimental production of SAF from wastewater-grown algae via HTL, along with a techno-economic assessment to identify opportunities for process improvements. Critical quality attributes of the SAF, such as density, viscosity, surface tension, and freeze point, were estimated within the expected fuel experience ranges when compared against petroleum jet fuel. The average minimum fuel selling price of fuels from wastewater-grown algae for breakeven economics was $\$9.04$ per gasoline gallon equivalent (GGE). The sale of co-products such as struvite fertilizers and cement additives can add revenue to reduce the net cost. Ultimately, the selling price is influenced by the scale of the HTL processing facility. Adjusting estimations in the process scale, algae yield, and capital cost estimation can lower the price to $\$6.51$/GGE or raise it to $13.07/GGE.

Biofuels↗
DOE OSTI2022

Muconic Acid Production from P. putida Using High Protein Algae Hydrolysate

The composition of algal biomass is highly dynamic, with protein, lipid, and carbohydrate contents varying in response to nutrient and environmental conditions during cultivation. Because shifts in biomass composition are often associated with reduced biomass productivity, production costs can often increase if targeting higher biomass compositional quality (enriched in carbohydrates or lipids at reduced protein content) as input for the algal biorefinery. The optimal algal biorefinery configuration is thus a function of many factors. One of the key strengths of the Combined Algal Processing (CAP) process is the versatility of feedstocks and products produced. The concept has been demonstrated with ethanol and a variety of carboxylic acids (succinic, butyric, muconic) as coproducts along with lipid upgrading to biofuel. Modification of the approaches, processes and downstream upgrading to fuels has allowed the CAP process to reduce costs and improve efficiency. Muconic acid is a high-value, potential fermentation coproduct of interest because it can be easily converted to adipic acid, a high-volume monomer for the production of nylon and other valuable consumer plastics. As such, the production of muconic acid through CAP was explored to expand the suite of products from algal biomass and to begin exploring the valorization of high protein content biomass from rapidly grown algae biomass. We have established initial performance parameters and shown that the range of substrates consumed by the muconic acid-producing microbe, Pseudomonas putida, includes at least glucose, mannose, glycerol, and lactic acid. We achieved complete utilization of these four major hydrolysate substrates achieving productivities of 0.037 (g/L/h) from Scenedesmus obliquus and 0.029 (g/L/h) from Monoraphidium minutum hydrolysates. Final titer and process yield (mol of muconic acid per mol of substrate (molP/molS)) were 0.99 g/L and 0.42 molP/molS from S. obliquus hydrolysate and 0.75 g/L and 0.23 molP/molS from M. minutum hydrolysate, respectively.

BIOMASS FUELS↗
DOE OSTI2022

Regionalized Life-Cycle Water Impacts of Microalgal-Based Biofuels in the United States

While algal biofuels have the potential to reduce the national reliance on fossil fuels, high water consumption associated with algal biomass cultivation represents a major concern potentially compromising the sustainable commercialization of this technology. This study focuses on quantifying the water footprint (WF) and water scarcity footprint (WSF) of renewable diesel derived from algal biomass and provides insights into where algal cultivation is less water-intensive than traditional ethanol and biodiesel feedstocks. Results are generated with an engineering process model developed to predict the life-cycle water consumption, considering green, blue, and gray water, of algae facilities across the United States at a high spatiotemporal resolution. The total WFs for Florida and Arizona are determined to be 13.1 and 17.6 m 3 GJ –1 , respectively. The blue WF in Arizona is shown to be 8.5 times larger than in Florida, while the green WF is 4.5 times smaller, but when combined into a total WF, there is just a 26% difference between the two locations. The analysis reveals that the total life-cycle WFs of algal renewable diesel are smaller than the optimal WFs of corn ethanol and soybean biodiesel. Algal systems benefit from higher growth rates and offer the opportunity to manage wastewater streams, therefore generating smaller green and gray WFs than those of conventional biofuels. Here, the WSF analysis identifies the Gulf Coast as the most suitable region for algal cultivation, with cultivation in the western US shown to exacerbate local water stress levels.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Pretreatment of Algae for the Production of Fuels and Chemical Coproducts

Algal biomass is a promising resource for producing renewable fuels and chemicals, but despite decades of research, algal biorefining remains in a pre-commercial state. Recent economic analyses have indicated that high-value co-products are necessary to offset the cost of fuel production, implying the need for algae fractionation technology. One promising fractionation approach is Combined Algal Processing (CAP), which pretreats and extracts algal biomass to produce a fermentable aqueous hydrolysate, an organic lipid fraction, and a residual solids fraction. The CAP approach has historically employed a dilute acid pretreatment to lyse cells and solubilize algal carbohydrates for fermentation of the hydrolysate phase, but we recently identified alternative pretreatments with the potential to decrease costs and environmental impacts, including different implementations of dilute acid pretreatment, dilute alkali pretreatment, enzymatic pretreatment, and flash hydrolysis. We conducted a screening of six different pretreatment approaches across nine algae strains of varying composition, and measured pretreatment effectiveness as a combination of carbon and nitrogen solubilization, lipid extraction yield, and lipid speciation. In this screening, we found traditional dilute acid pretreatment to provide the most robust pretreatment performance, though other pretreatments were competitive, and some performed better for certain strains of algae. These results highlight the interplay between algae composition and pretreatment effectiveness.

algae↗
DOE OSTI2024

Marine Algae Industrialization Consortium (MAGIC): Combining biofuel and high-value bioproducts to meet the RFS

The Marine Algae Industrialization Consortium (MAGIC) was formed to address pressing challenges in the commercialization of microalgae as a source of biofuel. The “Marine Algae Industrialization Consortium (MAGIC): Combining biofuel and high-value bioproducts to meet the RFS” project formally addressed two US Department of Energy Bioenergy Technologies Office (BETO) goals: (1) Model the sustainable supply of 1 million metric tonnes ash free dry weight (AFDW) cultivated algal biomass and (2) Demonstrate valuable co-products produced along with biofuel intermediates to increase value of algal biomass by 30%. To achieve these goals, the project demonstrated and validated high-value co-products to drive down the cost of biofuel by increasing the value of algae “co-products” towards increasing the selling price of total algae biomass as one of the key drivers of economics and adoption. This was accomplished through five core, interdependent tasks including: (1) strain selection to identify and deliver strains for mass culture, (2) mass culture using a hybrid cultivation system and following key operating parameters for downstream applications to provide algae feedstock, (3) recovery and conversion to evaluate two alternative methods to separate dry algae biomass into oil and residuals for downstream testing, (4) product assessment to determine biofuel, aquafeed or poultry feed product efficacy using algae biomass fractions as well as to provide critical performance data for valuation and (5) commercialization to use technoeconomic and life cycle assessments (TEA/LCA) as iterative design and assessment tools including consideration of target markets, competitors, and distribution channels to guide product assessment, development and valuation. A total of 46 peer-review publications, many open-access, provide detail of much of the work carried out and the results of the tasks. Additional reports and presentations provide other technical and public engagement material. At a high level, using a variety of approaches, more than 1000 marine microalgae strains were evaluated to ultimately identify the seven winners that were down-selected to be grown in mass culture. Strain selection demonstrated that there were no ‘super strains’ and that each candidate had strengths and limitations for specific products, growth conditions or operational considerations. Mass culture growth of these seven strains at >5000 L / 29 m 2 scale found that four them were suitable for product assessment. More than 250 kg of biomass was produced across hundreds of pond runs along with thousands of cultivation entries on the growth and biomass characteristics as well as environmental parameters. In the process, dozens of standard operating procedures were generated as was custom software to process and analyze cultivation data. Recovery and conversion of algae biomass demonstrated that a hexane solvent based extraction protocol was most effective at recovering oil (biocrude) from algae and four strains were processed to produce oil and lipid extracted algae (residuals) for downstream testing. Membrane-based oil separation was less successful, but may still be applicable to other commercial applications in the future. Product testing demonstrated that algae biocrude is of high quality and hydrotreating generated numerous fractions of high quality composition for fuel and lubricate based applications. Aquafeed studies performed at a variety of scales showed that both whole and defatted (lipid extracted algae) microalgae were suitable as a feed ingredient, but that the specifics of the fed animal and biochemical composition of the algae are critical factors when determining formulation. Similarly, poultry studies on whole and defatted microalgae generally showed positive outcomes on animal growth and health, with some microalgae providing enhanced nutritional composition of the animal product. Economic and life cycle assessments covered a wide range of possible commercialization and sustainability scenarios. Replacement value, improved product value added, consumer values marketing added valuation and improved animal health were considered as alternatives for microalgae valuation. Using the open pond system, algae productivity was identified as the key driver of commercialization economics, but combination of co-products (e.g. animal feed) with biofuel production substantially increased the total selling price of algae. Modeled microalgae selling price exceeded $\$$1500/tonne and could generate competitive biofuel selling prices below $\$$5 gallon gas equivalents using realistic algal productivities. Short (process scale) and longer (decadal trends) sustainability assessments show that marine microalgae can enhance the sustainability of energy production and lead to other realized benefits in water, fertilizer and land use for other sectors (e.g. agriculture). This project successfully demonstrated all of the components of an end-to-end process from mass microalgae cultivation and dewatering, to recovery and conversion of algae biomass components, to final product demonstration and process valuation; the combined results provide a framework for future commercialization of algae based biofuels.

09 BIOMASS FUELS↗
DOE OSTI2022

Improving the Economic Viability of Biological Utilization of Coal Power Plant CO 2 by Improved Algae Productivity and Integration with Wastewater Treatment

The overall goal of this project was to improve the cost-effectiveness of systems using algae to capture and beneficially utilize CO 2 from the flue gas of coal-fired power plants. Algal biomass cultivation is an attractive alternative for carbon capture and utilization because it can uptake more CO 2 per land area than any other photosynthetic crop. Also, the resulting biomass can be used to make valuable large-market commodity products, such as biofuels and animal feed. However, the use of algal carbon capture has been limited by several factors including: (1) high costs for growing algae (>$\$1,300$/ton), (2) large land requirements for algae cultivation, and (3) environmental concerns about the large amount of water and nutrient inputs needed for growing algae. This project has taken direct aim at resolving these key limitations and demonstrated several viable approaches to improve the economic and environmental feasibility of algal carbon capture. In particular, this project demonstrated a significant increase in average annual algal productivity from baseline values of 8 g/m 2 -day to above 20 g/m 2 -day. This supports a much lower projected cost of algae production (<$\$500$/ton) and reduces land requirements by more than 50%. Additionally, this project confirmed the ability to grow multiple algae species with wastewater nutrients, which facilitates the potential for substantial new revenue streams for algae cultivation based on tipping fees for nutrient laden wastewater. This study highlighted that there is more potential value in wastewater nutrient treatment credits than in the primary commodity products made from algae. The use of wastewater inputs also mitigates the concerns associated with the large amount of water needed for growing algae. The algal biomass grown for this project using wastewater and simulated flue gas inputs were characterized for potential use as an animal feed ingredient. The algae had a protein content in the range of 35-40%, which is between some common commodity animal feed products— distiller’s grains (~25-30% protein) and soybean meal (45-50% protein). In-vitro digestion tests using cattle rumen fluids, showed that this algae biomass was best suited for use as “bypass protein”, which is digested in the animal intestine. Based on the protein content and amino acid profile of the algae grown in this study, it was estimated to have market value in the range of $\$190$-$\$280$/ton. There is potential for higher value feed products if the algae content of omega-3 fatty acids or antioxidants is accounted for. This project also did small scale demonstration of forward osmosis algae dewatering and nanofiltration of hydrothermal liquefaction aqueous products, which were shown to improve the cost and energy balance for producing algal products. When all the improvements demonstrated in this study were included in techno-economic analysis, it showed there was a viable pathway to profitable algal CO 2 utilization with a payback period in the range of six to ten years.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Chapter 7.1: Microalgae

Microalgae is a unique biomass resource that does not need to compete for land and water with other biomass feedstocks because it can be cultivated on low-quality unencumbered land using noncompetitive water types including saline and wastewater. It is included as a complementary resource alongside other biomass feedstocks reported in this study, albeit at higher biomass production costs reflective of more capital-intensive farming operations than typical for terrestrial biomass. Higher biomass costs can be offset by the potential to produce value-added coproducts unique to compositional constituents of microalgae. Relative to BT16, this chapter reflects the latest analysis from the 2022 Algae Harmonization Update, which uses the latest parameterized and high-performing saline algal strain, second-generation carbon capture of point-source waste CO2 and high-pressure pipeline transport resolved to specific point-source types, saline water sourcing up to 40,000 mg/L total dissolved solids for source and makeup water salinity, blowdown water treatment and recycle, and brine disposal handling. National-scale algal biomass availability potential was calculated at 152 million tons/yr ash-free dry weight (AFDW) (191 million tons/yr dry weight) at an average biomass productivity of 26.2 g/m2 -day AFDW (about 50 tons/acre/yr dry weight).1 The algal biomass was cultivated on 3.9 million acres of multi-criteria screened and potentially available land for CONUS and fixed 268 million tons of waste CO2 based on biomass uptake. The algae biomass can be produced at an average MBSP of $674/ton AFDW ($536/ton dry weight) in 2020 dollars,2 corresponding to a total energy potential of 3.3 quads/yr at an average MBSP of $31.2/MMBtu (higher-heating-value [HHV] basis).

algae↗
DOE OSTI2021

Techno-Economic Assessment for Opportunities to Integrate Algae Farming with Wastewater Treatment

This report investigates the economic and scalability potential for algal biomass production based on opportunities to couple algae farming with wastewater treatment (WWT). This activity was motivated in part by a recent influx of technology developers who are currently in various stages of planning, construction, and operation of algae facilities for treating municipal wastewater, all making claims of tremendous economic potential for algal WWT relative to other more traditional WWT methods when viewing treated wastewater as the primary product output and algal biomass as a secondary coproduct. In addition to solving for minimum biomass selling price (MBSP) for a farm configured to maximize biomass production while minimizing water footprint (when sourcing makeup water from local groundwater resources at added cost), the algal WWT cases evaluated here also solved for MBSP while assigning a treatment credit as a means to valorize the treated water as a coproduct in the farm model. This enables a consistent comparison against the National Renewable Energy Laboratory’s standard algae farm models.

09 BIOMASS FUELS↗
DOE OSTI2021

BETO 2021 Peer Review - Algal Biofuels Techno-Economic Analysis 1.3.5.200

The objective of NREL's Algal Biofuel Techno-Economic Analysis (TEA) project is to provide process modeling and analysis to support Algae Program activities, utilizing TEA models to relate key process parameters with overall economics for cultivation, processing, and conversion of algal biomass to fuels and coproducts. By quantifying economic implications of key process metrics, TEA models highlight the technical requirements to achieve future program cost goals as well as enabling a means to track progress towards these goals. This project provides high impact and relevance though generation of critical cost data tied to funded research, with our analyses subsequently exercised by BETO to guide program plans, FOA priorities, and other directives. This includes costs for both algal biomass production and downstream conversion, most notably to support BETO's fuel cost targets below $2.5/GGE by 2030. To mitigate a key risk/challenge in constraining our work to academic analyses rooted only in future projections, our work also seeks to provide near-term value to today's algae industry through frequent industry engagement, while maintaining close ties with other BETO collaborators. This project has made numerous accomplishments since the 2019 peer review, including a continued focus on opportunities for value-added products, with related analyses for new pathway opportunities to achieve BETO cost goals and notable State-of-Technology (SOT) improvements over prior cost benchmarks.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1986

Satellite detection of phytoplankton export from the mid-Atlantic Bight during the 1979 spring bloom

Analysis of Coastal Zone Color Scanner (CZCS) imagery confirms shipboard and in situ moored fluorometer observations of resuspension of near-bottom chlorophyll within surface waters (1 to 10 m) by northwesterly wind events in the mid-Atlantic Bight. As much as 8 to 16 micrograms chl/l are found during these wind events from March to May, with a seasonal increase of algal biomass until onset of stratification of the water column. Rapid sinking or downwelling apparently occurs after subsequent wind events, however, such that the predominant surface chlorophyll pattern is approx. 0.5 to 1.5 micrograms/l over the continental shelf during most of the spring bloom. Perhaps half of the chlorophyll increase observed by satellite during a wind resuspension event represents in-situ production during the 4 to 5 day interval, with the remainder attributed to accumulation of algal biomass previously produced and temporarily stored within near-bottom water. Present calculations suggest that about 10% of the primary production of the spring bloom may be exported as ungrazed phytoplankton carbon from mid-Atlantic shelf waters to those of the continental slope.

Walsh, J. J.↗
DOE OSTI2021

A combined biological and chemical flue gas utilization system towards carbon dioxide capture from coal-fired power plants (Final Report)

Photosynthetic algal cultivation has been intensively studied for CO 2 capture and utilization for several decades. The footprint for using algae to capture CO 2 emitted from carbon-intensive industrial processes (power plants, cement plants, and fermentation processes) is extremely large, which creates serious technical and economic hurdles that must be cleared if algal technologies are to be commercially implemented. Fortunately, algal biomass is rich in proteins, carbohydrates, and lipids, providing a good chemical source for organic absorbents and other value-added chemical feedstocks. In particular, amino acids from algal protein can be used to generate amino acid salt solutions that have been proven to be effective for capturing CO 2 . In order to take advantage of both algal cultivation and biomass utilization, the goal of the proposed project is to develop a combined biological and chemical system for coal-fired power plants for sequestering CO 2 in biological absorbents and generating value-added products. This approach significantly reduces the land and energy footprint of CO 2 capture, and minimizes capital and operational expenses. Three specific objectives are targeted: 1) optimizing the growth of the selected algal strain to maximize biomass accumulation from the coal-fired flue gas; 2) developing a cascade biomass utilization to produce amino acid absorbents, polyurethanes, biodiesel, and methane; and 3) conducting techno-economic analysis (TEA) and life cycle assessment (LCA) of the proposed process. Three key technical outcomes were achieved: (1) With the selected robust algal strain and unique photobioreactor design, long-term culture stability can be extended, and algal biomass productivity reached 0.5 g dry biomass/L/day year-round at a biomass concentration of 1.2 g/L in the pilot photobioreactor; (2) The biomass utilization process led to complete utilization of the algal biomass to produce amino acid salt absorbent, polyurethanes, and methane; and (3) The combined biological and chemical flue gas utilization process concluded a technically and economically feasible commercial-scale system that completely captures CO 2 in coal-fired flue gas with greatly reduced energy consumption.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Viability of Reclaiming Municipal Wastewater for Potential Microalgae-Based Biofuel Production in the U.S.

Reclaimed municipal wastewater is a crucial component in biofuel production, especially in regions experiencing increasing freshwater scarcity. However, accurately estimating the potential for fuel production is challenging because of the uneven distribution of biofuel feedstock regions and wastewater treatment plants (WWTPs). This study assesses the viability of using reclaimed municipal water for algal biomass production in pond systems co-located with WWTPs under scenarios driven by biomass production and based on water transport logistics. We performed state- and county-level analysis of reclaimed water resources throughout the United States based on WWTP facility data. We overlaid these data onto estimated algae facility sites and examined the temporal resource availability to address seasonal variations in cultivation demand. Our findings reveal that 2694 billion liters per year of reclaimed water could potentially be used to produce 42.2 million metric tons (ash-free dry weight) of algal biomass, equivalent to 29.2 billion liters of renewable diesel equivalent (RDe). The use of reclaimed water would double current national water reuse and expand such reuse significantly in 455 counties across the United States. However, when we limit the construction of algae facilities to counties that can fully meet their water demand in order to minimize water transport burdens, the available supply decreases by 80%, to 512 billion liters, resulting in annual production of 12.2 billion liters of RDe, which still doubles current biodiesel production. Our analysis highlights the degree to which the location and flow of WWTPs and water transport affect the deployment of algae biofuel facilities and tradeoffs. These findings underscore the importance of improving the current WWTP infrastructure for reclaimed water reuse, especially in southern states.

09 BIOMASS FUELS↗
DOE OSTI2020

Production of Biocrude in an Advanced Photobioreactor-Based Biorefinery

Algenol Biotech, the National Renewable Energy Laboratory (NREL), Georgia Institute of Technology, Arizona State University, and Reliance Industries formed a team to advance the state of the art in algal biomass production and downstream processing technologies, with the end goal of a sustainable, economically viable biofuel intermediate (BFI, biocrude) product. The project included examination of high value co-product production as a market entry strategy and for enhancing the economics of a biorefinery for BFI production. The project targeted innovations in biology, operations, and engineering. The goals of the project were: BFI productivity greater than 4,000 gal-BFI/acre-yr on an annualized basis; energy efficient innovations in downstream operations resulting in an energy expenditure less than 10% of the BFI energy content and a carbon footprint reduction of more than 60% compared to fossil alternatives; and a comprehensive Techno-Economic Analysis (TEA) that identifies limiting factors for commercial viability of a photobioreactor (PBR)-based biofuel product. The project achieved the overall objectives. Strain development efforts led to the identification of a strain (Cyanobacterium sp. AB1166) that, relative to the previous best strain (Cyanobacterium sp. AB1), exhibited a ~10% increase in productivity under commercially-relevant cultivation conditions and also resulted in cultures with a >50% reduction in viscosity such that harvesting efficiency was improved; these results represent achievement of key project milestones. Progress was also made at NREL in altering the biochemical composition of algal biomass to improve the yield of BFI produced via HTL. These strain enhancements coupled with improved outdoor cultivation practices, including semi-continuous operation, increased areal biomass productivity by nearly 80% over the established baseline productivity. The annualized productivity achieved (26.8 g/m2-d), paired with HTL conversion yields realized at NREL and RIL (38% ± 2% BFI), translates to 4,100 gal-BFI/acre-yr, exceeding the FY20 BETO goal of 3,700 gal-BFI/acre-yr. Significant progress was also demonstrated in large scale PBR-based production system design, operability, and cost reduction. A 24,000-L production module comprised of 240 interlinked PBRs was constructed and successfully operated outdoors for over one year in Fort Myers, Florida. Aided by a state-of-the-art productivity model, the productivities achieved convincingly demonstrated scalability of laboratory results determined at the mL to L scale to large-scale outdoor operations exceeding 20,000 L. The system was used to cultivate Arthrospira platensis (Spirulina), an industrially-relevant cyanobacterium and source for phycocyanin, an approved blue food colorant that Algenol is developing as a risk reduction strategy for future biofuel projects and as a potential business opportunity. A key project milestone to develop phycocyanin extraction and purification technologies was achieved ahead of schedule, and product samples received positive feedback from potential customers. The production and downstream operations data generated in this project were used to conduct and refine Techno-Economic and Life Cycle Assessments to provide research guidance for reducing the costs and environmental footprint of algal biofuel and co-product manufacturing plants. Several CO 2 supply scenarios for an algal biorefinery were identified as being capable of providing a large (>60%) reduction in carbon footprint in comparison to gasoline. The TEA assessments incorporated detailed comparisons of PBR versus open pond production systems, yielding a 3-fold higher areal productivity for PBRs and suggesting overall production cost parity for the two systems. The progress in this ABY2 project addressed many of the the barriers identified for the Advanced Algal Systems R&D Program and are directly relevant to achieving the established BETO goals associated with large scale biofuel production and cost reduction.

09 BIOMASS FUELS↗
DOE OSTI2021

The Influence of Bacteria on the Growth, Lipid Production, and Extracellular Metabolite Accumulation by Phaeodactylum tricornutum (Bacillariophyceae)

Here, to examine the impact of heterotrophic bacteria on microalgal physiology, we co-cultured the diatom Phaeodactylum tricornutum with six bacterial strains to quantify bacteria-mediated differences in algal biomass, total intracellular lipids, and for a subset, extracellular metabolite accumulation. A Marinobacter isolate significantly increased algal cell concentrations, dry biomass, and lipid content compared to axenic algal cultures. Two other bacterial strains from the Bacteroidetes order, of the genera Algoriphagus and Muricauda, significantly lowered P. tricornutum biomass, leading to overall decreased lipid accumulation. These three bacterial co-cultures (one mutualistic, two competitive) were analyzed for extracellular metabolites via untargeted liquid chromatography mass spectrometry to compare against bacteria-free cultures. Over 80% of the extracellular metabolites differentially abundant in at least one treatment were in higher concentrations in the axenic cultures, in agreement with the hypothesis that the co-cultured bacteria incorporated algal-derived organic compounds for growth. Furthermore, the extracellular metabolite profiles of the two growth-inhibiting cultures were more similar to one another than the growth-promoting co-culture, linking metabolite patterns to ecological role. Our results show that algal–bacterial interactions can influence the accumulation of intracellular lipids and extracellular metabolites, and suggest that utilization and accumulation of compounds outside the cell play a role in regulating microbial interactions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

A bloom of a single bacterium shapes the microbiome during outdoor diatom cultivation collapse

Algae-dominated ecosystems are fundamentally influenced by their microbiome. We lack information on the identity and function of bacteria that specialize in consuming algal-derived dissolved organic matter in high algal density ecosystems such as outdoor algal ponds used for biofuel production. Here, we describe the metagenomic and metaproteomic signatures of a single bacterial strain that bloomed during a population-wide crash of the diatom, Phaeodactylum tricornutum, grown in outdoor ponds. 16S rRNA gene data indicated that a single Kordia sp. strain (family Flavobacteriaceae) contributed up to 93% of the bacterial community during P. tricornutum demise. Kordia sp. expressed proteins linked to microbial antagonism and biopolymer breakdown, which likely contributed to its dominance over other microbial taxa during diatom demise. Analysis of accompanying downstream microbiota (primarily of the Rhodobacteraceae family) provided evidence that cross-feeding may be a pathway supporting microbial diversity during diatom demise. In situ and laboratory data with a different strain suggested that Kordia was a primary degrader of biopolymers during algal demise, and co-occurring Rhodobacteraceae exploited degradation molecules for carbon. An analysis of 30 Rhodobacteraceae metagenome assembled genomes suggested that algal pond Rhodobacteraceae commonly harbored pathways to use diverse carbon and energy sources, including carbon monoxide, which may have contributed to the prevalence of this taxonomic group within the ponds. These observations further constrain the roles of functionally distinct heterotrophic bacteria in algal microbiomes, demonstrating how a single dominant bacterium, specialized in processing senescing or dead algal biomass, shapes the microbial community of outdoor algal biofuel ponds.

Kordia↗