Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AlC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Synthesis of Ti 3 C 2 T z MXene from low-cost and environmentally friendly precursors

Herein we report an approach to synthesis Ti 3 AlC 2 MAX phase and Ti 3 C 2 T z MXene from low-cost precursors, viz. recycled carbon recovered from waste tire, recycled aluminum scrap, and titanium oxide. By adjusting the ratios of the initial materials, we determined that 3TiO 2 +6Al+1.9C resulted in the purest sample of Ti 3 AlC 2 when heated at 1,350 °C for 1 h. The MXene phase was synthesized by modified minimally intensive layer delamination and acid etching under N2 purging. The final Ti 3 C 2 T z films demonstrated conductivity of 5857 ± 680 S/cm and capacitance of 285 F/g (1,012 F/cm 3 ) at 20 mV/s scan rates, which are comparable with that produced from MAX phase of high-purity elemental precursors (viz. Ti, Al and C). Choosing readily available and inexpensive precursor materials such as these allows for a drastic reduction in production cost of the MXene, as well as reducing the environmental impact of the industry.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Modeling of thermal pressurization in tight claystone using sequential THM coupling: Benchmarking and validation against in-situ heating experiments in COx claystone

We apply thermoporoelasticity and a sequentially coupling technique for modeling thermally-driven coupled Thermo-Hydro-Mechanical (THM) processes in tight claystone. A THM benchmark case with a corresponding analytic solution for thermoporoelasticity under a constant heat loading verifies the model. Thereafter, two in situ heating experiments are simulated for model validation: a smaller-scale heating experiment (TED experiment) and a larger-scale experiment (ALC experiment) in Callovo-Oxfordian (COx) claystone at the Meuse/Haute-Marne underground research laboratory in France. The model exhibits good performance to match the observed temperature and pore pressure evolution for the smaller-scale TED experiment. For the larger-scale ALC experiment, general trends of thermal-pressurization are captured in the modeling, but pressure is underestimated at some monitoring points during cool-down. This indicates that the THM response in the field may be affected by the variability of rock's properties or irreversible or time-dependent mechanical processes that are not included in the current thermoporoelastic model. The main contributions of this work are as follows: (1) we verify and validate the numerical simulator, TOUGH-FLAC, to be a valuable coupled THM modeling tool; (2) prove that the laboratory determined material parameters can be used as reference values for upscaling experiments. However, to better identify and quantify THM processes with modeling of in situ tests, more emphasize should be dedicated to obtaining high-quality mechanical deformation data.

58 GEOSCIENCES↗
DOE OSTI2020

Materials Data on Zr3Al3C5 by Materials Project

Zr3Al3C5 crystallizes in the hexagonal P6_3/mmc space group. The structure is two-dimensional and consists of two AlC sheets oriented in the (0, 0, 1) direction and two Zr3(AlC2)2 sheets oriented in the (0, 0, 1) direction. In each AlC sheet, Al3+ is bonded in a trigonal planar geometry to three equivalent C4- atoms. All Al–C bond lengths are 1.91 Å. C4- is bonded in a trigonal planar geometry to three equivalent Al3+ atoms. In each Zr3(AlC2)2 sheet, there are two inequivalent Zr+3.67+ sites. In the first Zr+3.67+ site, Zr+3.67+ is bonded to six equivalent C4- atoms to form a mixture of corner and edge-sharing ZrC6 octahedra. The corner-sharing octahedral tilt angles are 3°. All Zr–C bond lengths are 2.37 Å. In the second Zr+3.67+ site, Zr+3.67+ is bonded to six C4- atoms to form a mixture of corner and edge-sharing ZrC6 octahedra. The corner-sharing octahedral tilt angles are 3°. There are three shorter (2.29 Å) and three longer (2.59 Å) Zr–C bond lengths. Al3+ is bonded in a trigonal non-coplanar geometry to three equivalent C4- atoms. All Al–C bond lengths are 2.09 Å. There are two inequivalent C4- sites. In the first C4- site, C4- is bonded in a 3-coordinate geometry to three equivalent Zr+3.67+ and three equivalent Al3+ atoms. In the second C4- site, C4- is bonded to six Zr+3.67+ atoms to form a mixture of corner and edge-sharing CZr6 octahedra. The corner-sharing octahedral tilt angles are 0°.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on CsAl by Materials Project

AlCs is Zintl Phase structured and crystallizes in the tetragonal I4_1/amd space group. The structure is three-dimensional and consists of two AlCs frameworks. Cs is bonded to four equivalent Al atoms to form distorted corner-sharing CsAl4 tetrahedra. All Cs–Al bond lengths are 3.62 Å. Al is bonded to four equivalent Cs atoms to form distorted corner-sharing AlCs4 tetrahedra.

36 MATERIALS SCIENCE↗
NASA NTRS1994

The Automated Aircraft Rework System (AARS): A system integration approach

The Mercer Engineering Research Center (MERC), under contract to the United States Air Force (USAF) since 1989, has been actively involved in providing the Warner Robins Air Logistics Center (WR-ALC) with a robotic workcell designed to perform rework automated defastening and hole location/transfer operations on F-15 wings. This paper describes the activities required to develop and implement this workcell, known as the Automated Aircraft Rework System (AARS). AARS is scheduled to be completely installed and in operation at WR-ALC by September 1994.

Benoit, Michael J.↗
NASA NTRS2014

MODIS NDVI Change Detection Techniques and Products Used in the Near Real Time ForWarn System for Detecting, Monitoring, and Analyzing Regional Forest Disturbances

This presentation discusses MODIS NDVI change detection methods and products used in the ForWarn Early Warning System (EWS) for near real time (NRT) recognition and tracking of regionally evident forest disturbances throughout the conterminous US (CONUS). The latter has provided NRT forest change products to the forest health protection community since 2010, using temporally processed MODIS Aqua and Terra NDVI time series data to currently compute and post 6 different forest change products for CONUS every 8 days. Multiple change products are required to improve detectability and to more fully assess the nature of apparent disturbances. Each type of forest change product reports per pixel percent change in NDVI for a given 24 day interval, comparing current versus a given historical baseline NDVI. EMODIS 7 day expedited MODIS MOD13 data are used to obtain current and historical NDVIs, respectively. Historical NDVI data is processed with Time Series Product Tool (TSPT); and 2) the Phenological Parameters Estimation Tool (PPET) software. While each change products employ maximum value compositing (MVC) of NDVI, the design of specific products primarily differs in terms of the historical baseline. The three main change products use either 1, 3, or all previous years of MVC NDVI as a baseline. Another product uses an Adaptive Length Compositing (ALC) version of MVC to derive an alternative current NDVI that is the freshest quality NDVI as opposed to merely the MVC NDVI across a 24 day time frame. The ALC approach can improve detection speed by 8 to 16 days. ForWarn also includes 2 change products that improve detectability of forest disturbances in lieu of climatic fluctuations, especially in the spring and fall. One compares current MVC NDVI to the zonal maximum under the curve NDVI per pheno-region cluster class, considering all previous years in the MODIS record. The other compares current maximum NDVI to the mean of maximum NDVI for all previous MODIS years.

Spruce, Joseph P.↗
DOE OSTI2020

Trace Chemical Detection Using Intercalated MXenes as a Signal Enhancing Substrate in Optical Probes

MXenes are 2D materials composed of layered transition metal nitrides or carbides. These materials are synthesized by HF exfoliation from MAX phases (Ti{sub 3}AlC{sub 2}). The 2D nanomaterial was synthesized by the removal of the 'A' element, resulting in a Mxene product (Ti{sub 3}C{sub 2}). MXenes have the general formula M{sub n+1}X{sub n}T{sub x}, where M is an early transition metal, X is Carbon and/or Nitrogen, and T accounts for surface terminated functional groups such as Fluoride, hydroxyl, and oxygen. These materials have very unique properties, similar to graphene, that allows them to be applied in a variety of trace detection techniques including surface-enhanced Raman spectroscopy (SERS). MXenes have also been demonstrated to selectively uptake uranyl ion, UO{sub 2}{sup 2+}. If this property can be combined with SERS or fluorescence detection, it may be possible to use MXenes as the basis for an alternative method to kinetic phosphorescence analysis (KPA) for trace uranyl measurements. Objectives: To confirm that MXene Nano materials are suitable substrates for SERS and sensor development by enhancing Raman signaling. To determine if certain MXene preparation methods yield materials that are more suitable for trace sensing methods. To determine uranyl uptake properties of these MXene materials and test them for analytical signals. Sample Preparation: Preparation of Ti{sub 3}C{sub 2}MXene (at FSU). MXenes were prepared by etching Al from Ti{sub 3}AlC{sub 2} (MAX phase)material. Two etching techniques yield different MXene products: LiF/HCl: Milder reaction, larger MXene flakes. HF: Harsher reaction, smaller flakes, larger layer separation. Products washed to remove etchant, vacuum filtered, and dried. Dried MXene flakes are air-stable. Film preparation for sensor testing (at SRNL): Suspend powder in diH{sub 2}O, purge with Ar, sonicate for 30 min. Centrifuge and collect supernate with suspended particles. Observed LiF-etched Mxene yielded a higher density of particles and darker collected solution. Drop-cast (4 ml) supernate onto slides and dried with Ar. For Rhodamine B (RhB) testing, drop-cast 4 ml drops onto Mxene spots and dried with Ar. Scanning Electron Microscopy conditions: 10 kV Beam energy, high vacuum; Working distance of 8 mm; beam penetration depth appx. 4 microns, beam spot size appx. 2 nanometers. Results: Detection of aluminum correlates with bright spots on image. Presence of aluminum shows that LiF/HCl etching was less thorough than HF etching. Trace Cl detection in LiF images suggests incomplete rinsing. HF has smaller feature size, more layer structure, and increased homogeneity, consistent with expectations. Macroscopic Raman spectroscopy measurements: 532 nm excitation, ∼50 mW with a ∼100 micron spot size (InPhotonics RPB probe). Kaiser Optical Holospec f/1.8 spectrometer with cooled (-60 deg.C) Andor iDus OE420 CCD. LiF 1x supernate showed good signal for trace measurements of Rhodamine B. HF and 1/4x LiF supernates showed little Mxene or Rhodamine B signal. Low deposition densities led to excess background signal from glass slides. For LiF film, response is linear with Rhodamine B concentration over range tested. Will retest with Raman microscope (∼1 micron spot size) to characterize SERS of more dilute LiF and HF etched Mxenes. Conclusions: The LiF etched material was more suitable for macroscopic SERS measurements because it was more concentrated, resulting in a thicker film than the HF etched Mxene and diluted LiF sample. However, the other materials may give greater SERS enhancements, which we hope to determine from measurements with the Raman microscope. From characterization with SEM we concluded that the HF etched Mxene is more uniform/homogenous and has smaller particle size than the LiF etched Mxene. There is still aluminum present in both samples indicating that etching wasn't complete, but the removal of the aluminum was more efficient in the HF method. Path Forward: Observe SERS with Raman microscopy, to obtain better signals for the more diluted samples and be able to compare enhancement effects for the different MXenes. Characterize uranyl sorption into MXene films and test Raman and fluorescence signals. Revisit the etching conditions to improve removal of aluminum. FSU and SRNL will continue to collaborate to create and characterize different Mxene materials and test their usefulness for sensor applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synthesis of new two-dimensional titanium carbonitride Ti 2 C 0.5 N 0.5 T x MXene and its performance as an electrode material for sodium-ion battery

Two-dimensional (2D) layered transition metal carbides/nitrides, called MXenes, are attractive alternative electrode materials for electrochemical energy storage. Owing to their metallic electrical conductivity and low ion diffusion barrier, MXenes are promising anode materials for sodium-ion batteries (SIBs). Herein, we report on a new 2D carbonitride MXene, viz ., Ti 2 C 0.5 N 0.5 T x (T x stands for surface terminations), and the only second carbonitride after Ti 3 CNT x so far. A new type of in situ HF (HCl/KF) etching condition was employed to synthesize multilayer Ti 2 C 0.5 N 0.5 T x powders from Ti 2 AlC 0.5 N 0.5 . Spontaneous intercalation of tetramethylammonium followed by sonication in water allowed for large-scale delamination of this new titanium carbonitride into 2D sheets. Multilayer Ti 2 C 0.5 N 0.5 T x powders showed higher specific capacities and larger electroactive surface area than those of Ti 2 CT x powders. Multilayer Ti 2 C 0.5 N 0.5 T x powders show a specific capacity of 182 mAh g -1 at 20 mA g -1 , the highest among all reported MXene electrodes as SIBs with excellent cycling stability.

25 ENERGY STORAGE↗
DOE OSTI2025

Multiscale Characterization of Additive Manufacturing Components with Computed Tomography, 3D X-ray Microscopy, and Deep Learning

Additive manufacturing (AM) facilitates the creation of complex-geometry parts, driving advancements in lightweight aerospace components, high-efficiency engine cooling channels, and customized medical implants. However, ensuring the quality and reliability of AM parts remains challenging due to internal defects, surface irregularities, porosity, and residual trapped powder, which are often inaccessible to traditional inspection methods. Recent developments in X-ray computed tomography (XCT) and 3D X-ray microscopy (XRM), particularly systems equipped with resolution-at-a-distance (RaaD™) capabilities, enable high-resolution, non-destructive evaluation of AM components across multiple scales, from sub-micrometer to macroscopic levels. This paper explores modern XCT and XRM techniques for multiscale characterization of AM parts, focusing on their ability to detect and analyze defects such as porosity, cracks, inclusions, and surface roughness, while offering insights into defect formation mechanisms, material properties, and process-induced variations. The integration of deep learning (DL) frameworks, including Simurgh, DeepRecon, and DeepScout, enhances XCT/XRM workflows by reducing scan times, improving resolution recovery, and enabling accurate defect detection even with limited projection data. These DL-based methods overcome limitations of traditional reconstruction techniques, enabling faster, more reliable characterization of dense materials like Inconel 718 and novel alloys such as AlCe. Applications include process parameter optimization, high-throughput quality control, and multistage AM process evaluation, with DL-enhanced workflows accelerating analysis times from weeks to days. Correlative imaging approaches further validate XCT and XRM data against scanning electron microscopy (SEM) images of physically sectioned samples, confirming the accuracy of DL-based reconstructions and enabling comprehensive defect analysis. While challenges remain in generalizing DL models to diverse materials and imaging conditions, improvements in resolution, noise reduction, and defect detection highlight the transformative potential of these methods. This multiscale and correlative approach enables precise identification and correlation of microstructural features with the overall performance of AM components. By integrating advanced XCT, XRM, and DL techniques, this paper demonstrates a significant leap forward in AM characterization, offering valuable insights into the relationships between processing parameters, microstructure, and part performance, and driving innovations that enhance the quality and reliability of AM products for demanding industrial applications.

Additive manufacturing↗
DOE OSTI2020

Thermodynamic Modeling of the Al-Ce-Cu-Mg-Si System and Its Application to Aluminum-Cerium Alloy Design

Recently discovered AlCe alloys have shown promise in a number of applications, but the propensity of Ce to react with Al and other alloying elements can complicate the phase equilibria and design approach. To solve this, the CALPHAD method is used to explore an alloy within the quinary Al-Ce-Cu-Mg-Si system by developing a thermodynamic database with self-consistent parameters. The database includes a description of all 10 binary systems and 8 ternary systems consisting of: (i) 6 Al-containing ternaries (Al-Ce-Cu, Al-Ce-Mg, Al-Ce-Si, Al-Cu-Mg, Al-Cu-Si and Al-Mg-Si); and (ii) 2 additional ternaries that include Mg and Si (i.e., Ce-Mg-Si and Cu-Mg-Si). The thermodynamic description for the Al-Ce-Mg and Al-Mg-Si systems were reassessed to ensure consistency with the binary systems and the Ce-Mg-Si system is presented for the first time and compared to theoretical data from DFT (Density Functional Theory). In addition to the ternary interactions, the quaternary compound Al3Cu2Mg9Si7 and solid solution extending from the ternary Al2CuMg phase (Al,Si)2CuMg are incorporated. The CALPHAD method is employed and leveraged through the use of a Materials Design Simulator (MDS) to accelerate the design of novel aluminum-cerium-based alloys. The combination of a CALPHAD-based framework with experimental efforts and industrial insight permits the development of three new Al-Ce alloys: Al-3.5Ce-0.4Mg-7Si (Ce-modified A356), Al-5Ce-1Cu-0.5Mg-10Si and Al-19Ce-0.9Mg-1.1Si.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Engineering phonon transport through cation disorder in dimensionally constricted high entropy MXene

Designing materials with low thermal conductivity is a crucial objective for applications in thermal insulation and thermoelectrics. Traditional methods such as doping, mechanical strain and introducing defects in perfect crystals have been widely explored to impede the flow of heat. Here, this work introduces dimensional constriction and cationic disorder as novel avenues to manipulate lattice thermal conductivity (LTC). High entropy materials characterized by random distribution of multiple elements, creates a suitable environment for thermal insulation due to its configurational disorder and local lattice distortions. On the other hand, MXenes, derived from MAX-phase, have garnered considerable attention due to their unique structural attributes, leading to potential applications in catalysis and energy storage. Ti 2 AlC MAX-phase is examined to understand the impact of dimensional constriction on phonon transport of Ti 2 C with cationic disorder, i.e., (Ti 0.25 Nb 0.25 Cr 0.25 Ta 0.25 ) 2 C. The exponential reduction in LTC of HE-MXene is attributed to disorder scattering that significantly limits phonon mean free path (MFP) and relaxation time. The spread of mode-resolved LTC with MFP highlights the influence of disorder on phonon scattering. This work provides a systematic approach to engineer LTC through dimensional constriction and cationic disorder, laying the foundation for tailored materials with desired thermal properties.

2D materials↗
DOE OSTI2025

Bulk-scale stress–strain hysteresis in layered crystalline solids: A study of graphite and Ti 3 SiC 2

Polycrystalline graphite and the MAX phase Ti 3 SiC 2 are layered crystalline solids with similar deformation mechanisms, including basal slip, ripplocation boundaries (RBs), kink boundaries (KBs), and cracking. The interplay of these mechanisms, notably in energy dissipation, has been much discussed in the past twenty-five years. This study builds upon previous work, investigating deformation with a renewed emphasis on the bulk-scale and given recent findings concerning RBs. Our investigation compares the evolution of energy dissipation, nonlinear recoverable and irrecoverable strain, and damage upon increasing stress for graphite and Ti 3 SiC 2 . Benitez et al.’s (2016) methodology of compressive cyclic loading and post-mortem electron backscatter diffraction (EBSD) to assess the prevalence of kinking based on low-angle grain boundaries (LAGBs) was used. Strains were measured with digital image correlation and EBSD was conducted on Ti 3 SiC 2 leveraging dictionary indexing, which was necessary herein to identify LAGBs accurately. The stress–strain stages of Ti 3 SiC 2 agree with literature on Ti 2 AlC. Damage and energy dissipation were more accelerated in graphite. No significant difference was observed in the fraction of LAGBs between pristine and unloaded Ti 3 SiC 2 . Trends observed and EBSD evidence that KBs were not dominant suggest that RBs are the primary dissipator of energy in both materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Circulating Lymphocyte Counts Early During Radiation Therapy Are Associated With Recurrence in Pediatric Medulloblastoma

Decreased peripheral lymphocyte counts are associated with survival after radiation therapy (RT) in several solid tumors, although they appear late during or after the radiation course and often correlate with other clinical factors. Here we investigate if absolute lymphocyte counts (ALCs) are independently associated with recurrence in pediatric medulloblastoma early during RT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2021

Ab-initio predictions of phase stability, electronic structure, and optical properties of (0001)-MAX surfaces in M 2 AC (M = Cr, Zr, Hf; A = Al, Ga)

In this work, we report MAX phases' surface properties, which are essential for thin-film technology due to their excellent resistance to high-temperature oxidation, corrosion, and wear. The surface stability, electronic, and optical properties of 0001-surfaces in M 2 AC (M = Zr, Hf, Cr; A = Al, Ga) are investigated and compared with their bulk counterparts. The interplay between chemical bonding and charge distribution is discussed from electronic structure, including the Fermi surfaces. Four possible (0001)-terminated surfaces are considered by breaking M - C and M-A bonds in which cleavage energy of M - C is higher than M-A. The Cr–Al bond in Cr 2 AlC is stronger than other M-A bonds. The charge density of valance A-p electrons redistributes in the surface area, distinct from that of the bulk. The A- and M(C)-terminated (0001)-surfaces are the most stable and energetically favorable terminations due to lower surface energies. The optical properties of the most stable (0001)-surfaces were also investigated to understand the dielectric and photoconductive behavior in the (0001)-terminated surfaces of M 2 AC.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ingeniously enhanced ferromagnetism in chemically-reduced 2D Ti 3 C 2 T X MXene

Chemical reduction is a facile and cost-effective technique for the modulation of the physical and chemical properties of nanomaterials. In this work, we demonstrate an enhancement of the magnetic behavior of Ti 3 C 2 T x MXene after its chemical reduction via l-ascorbic acid treatment. Small ferromagnetic loops have been observed below 50 K for Ti 3 C 2 T x prepared by hydrofluoric acid (HF) etching of Al layers from Ti 3 AlC 2 . Such a ferromagnetic ordering of spins was significantly enhanced via a chemical reduction of Ti 3 C 2 T x with l-ascorbic acid. Ferromagnetic hysteresis loops were observed for reduced Ti 3 C 2 T x (r-Ti 3 C 2 T x ) up to 150 K indicating a significant upshift of the paramagnetic to the ferromagnetic transition temperature, pushing towards room temperature. The enhancement of ferromagnetism and upshift of the ferromagnetic transition temperature could be attributed to the localized unpaired electron in Ti-3d orbital of the r-Ti 3 C 2 T x crystal and increase in the number of unsaturated Ti atoms upon l-ascorbic acid treatment. Chemical reduction via l-ascorbic acid treatment shows a promising pathway towards the modulation and enhancement of magnetism in various MXene materials for the development of 2D metallic soft ferromagnets and spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Accelerated radiation tolerance testing of Ti-based MAX phases

MAX phases have recently attracted significant attention for potential nuclear applications due to their novel properties such as unique hexagonal-compact nanolayered crystal structure, high-machinability due to lower hardness levels compared to conventional ceramics, and high-chemical inertness. In order for MAX phases to be used in nuclear reactors, two aspects deserve detailed investigations: (i) their phase stability at high-temperatures and (ii) microstructural defect formation and recovery induced by energetic particle irradiation. To date, degradation mechanisms of MAX phases at high-temperatures and following irradiation are largely unexplored fields of research. This work focuses on the evaluation of two Ti-based MAX phases – Ti 2 AlC and Ti 3 SiC 2 – within the context of extreme environments. To accomplish this, a one-of-a-kind comparison between neutron irradiations, performed over a decade of research at the High Flux Isotope Reactor (HFIR), and heavy-ion irradiations, carried out in situ in a Transmission Electron Microscope (TEM) at the MIAMI-2 facility, has been conducted. The results show Ti-based MAX phases are prone to accelerated decomposition under the conditions investigated. This questions the hypothesis that MAX phases exhibit high phase stability, especially when used in future nuclear energy systems where energetic particle irradiation is a dominating degradation mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Interplay of electronic structure, magnetism, strain, and defects in carbide $\mathrm{MX}$enes

We report the two-dimensional (2D) magnetic and semiconducting materials, including carbide MXenes, are in high demand for magneto-electronic devices and applications. Here, we report a first-principles study of electronic structure and magnetism of a Ti 2 C MXene, its derivatives Ti 2 CT 2 (T = -F, -O, -OH, -H), and the effect of single vacancy defects (25% C, 12.5% O, and 12.5% and 5.5% Ti) and transition metal (V, Cr, Mn, and Co) dopings. The MAX phase Ti 2 AlC is a non-magnetic (NM) metal which upon removal of Al layer forms a pristine Ti 2 C MXene with A-type antiferromagnetic (AFM) semiconductor having reliable transition temperature (T N = 41K) predicted by the Heisenberg model. All the functionalized MXenes are stable as NM metal except for Ti 2 CO 2 which remains semiconducting with NM ground state. The significant effect of spin–orbit coupling (SOC) is evident in the band structure forming Dirac-like cones and band inversions near the Fermi level. Depending upon the type of vacancy defects Ti 2 CO 2 is NM metal and ferromagnetic (FM) metal. The transition metal (TM) doped MXenes fulfill FM Stoner criterion. The V- and Co-doped MXenes are metals, whereas Cr- and Mn-doped are half-metal and semiconductor.

2D magnetism↗
DOE OSTI2023

Ice Recrystallization Inhibition Activity of Soy Protein Hydrolysates

Identifying and developing ice recrystallization inhibitors from sustainable food proteins such as soy protein isolate (SPI) can lead to practical applications in both pharmaceutical and food industries. Here, the objective of this study was to investigate the ice recrystallization inhibition (IRI) activity of SPI hydrolysates, and this was achieved by using an IRI activity-guided fractionation approach and relating IRI activity to interfacial molecular activity measured by vibrational sum frequency generation (VSFG). In addition, the impact of molecular weight (MW) and enzyme specificity was analyzed using three different proteases (Alcalase, trypsin, and pancreatin) and varying hydrolysis times. Using preparative chromatography, hydrolysates from each enzyme treatment were fractionated into five different MW fractions (F1–F5), which were then characterized by high-performance liquid chromatography (HPLC). All SPI hydrolysates had IRI activity, resulting in a 57–29% ice crystal diameter reduction when compared to native SPI. The F1 fraction (of 4–14 kDa) was most effective among all tested hydrolysates, while the lower MW peptide fractions lacked activity. One sample (SPI-ALC 20-F1) had a 52% reduction of ice crystal size at a lower concentration of 2% compared to the typical 4% used. SFG showed a difference in H-bonding and hydrophobic interactions of the molecules on the water/air interface, which may be linked to IRI activity. This study demonstrates for the first time the ability of SPI hydrolysates to inhibit ice crystal growth and the potential application of SFG to study molecular interaction at the interface that may help illustrate the mechanism of action.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗