Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATOMIC RECOMBINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Influence of probe contamination on recombination of atomic hydrogen

Atomic hydrogen concentration profiles were measured through a screen-stabilized one-dimensional propane/oxygen front using a specially modified electron spin resonance (ESR) spectrometer. The ESR line occurring at 3075.5 G at 9261.2 MHz was monitored in the presence and absence of various halogenated hydrocarbons. A significant cumulative decrease in peak intensity occurred with addition of any halogenated compound. Further results suggest that the effect is due to inhibitor action on the transport tube walls followed by changes in atomic hydrogen interaction with the walls, and that hydrogen decay is nonlinear in the halogenated tube.

Collins, L. W.↗
NASA NTRS1978

Metastable oxygen emission bands

Recombination of ground-state oxygen atoms populates six different bound electronic states of molecular oxygen. Of the six optical transitions expected between the three upper states at 4 to 4.5 electron volts and the two lowest states, five have been observed in the afterglow of a conventional helium-oxygen microwave discharge in both (O-16)2 and (O-18)2, three of them for the first time in gas-phase spectra. Generation of these emissions from oxygen atoms in a system free of molecular oxygen establishes that atom recombination is the production mechanism.

Slanger, T. G.↗
NASA NTRS1985

Adsorption and recombination of hydrogen atoms on a model graphite surface

The adsorption and recombination of atomic hydrogen on a model graphite grain have been examined in a series of calculations in which a modified, iterative, extended Hueckel program was used. The hydrogen atom is found to be chemisorbed at a site with a zero-point binding energy of 0.7 eV and at an equilibrium distance of 2.25 A above the site. Despite a barrier of about 0.4 eV between adjacent sites, calculations suggest that at temperatures as low as 10 K, an H atom will tunnel through to adjacent sites in less than one nanosecond. However, a potential barrier to the recombination of two hydrogen atoms has been found which displays high sensitivity to the mutual arrangement of the two hydrogen atoms with respect to the graphite surface. Results show that at very low temperatures, recombinations can occur only by tunneling. Consistent with experiment, the region in which H2 begins to form exhibits a repulsive potential with respect to possible chemisorption of the incipient H2 entity.

Aronowitz, S.↗
NASA NTRS1961

Stability of Titanium Nitride and Titanium Carbide When Exposed to Hydrogen Atoms from 298 to 1950 K

Titanium nitride and titanium carbide deposited on tungsten wires were exposed to hydrogen atoms (10(exp -4) atm pressure) produced by the action of microwave radiation on molecular hydrogen. The results of these experiments in the temperature range 298 to 1950 K indicate that no appreciable reaction takes place between atomic hydrogen and TiN or TiC. The formation of reaction products (NH3, CH4, C2H2) should be favored at lower temperatures. However, because of the high catalytic activity of Ti for H atom recombination, the rate of such reactions with H atoms is controlled by the rate of evaporation of Ti from the surface, this rate being low at temperatures below 1200 K. In order to interpret the stability of TiN and TiC in H atoms more fully, the stability of TiN and TiC in vacuum and H2 gas was also studied. The thermodynamic computations conform in order of magnitude to the experimentally found rates of decomposition of TiN and TiC in vacuum and are also consistent with the fact that no appreciable reaction is found with these compounds in molecular H2 at a pressure of 10(exp -3) atmosphere in the temperature range 2980 to 2060 K. When TiN or TiC was heated in atomic H or molecular H2, no reaction products other than those obtained from the simple decomposition of the nitride and carbide were observed. The gaseous products were analyzed in a mass spectrometer.

Philipp, Warren H.↗
NASA NTRS1989

Arc jet diagnostics tests

Two objectives were addressed during a 10 week 1988 NASA/ASEE summer faculty fellowship at the Johnson Space Center Atmospheric Reentry Materials Structures Evaluation Facility (ARMSEF). These objectives were the evaluation of mass spectrometry for the measurement of atomic and molecular species in an arc jet environment, and the determination of atomic recombination coefficients for reaction cured glass (RCG) coated high temperature surface insulation (HRSI) materials subjected to simulated reentry conditions. Evaluation of mass spectrometry for the measurement of atomic and molecular species provided some of the first measurements of point compositions in arc jet tunnel environments. A major objective of this project centered around the sampling residence time. A three staged vacuum sampling system pulled the molecules and atoms from the arc jet to a quadrupole ionization mass spectrometer in 400 milliseconds. Conditions investigated included a composition survey across the nozzle exit at 3 cm z-distance from the nozzle exit for 3 different currents. Also, a point composition survey was taken around a shock created by the presence of a blunt body.

Willey, Ronald J.↗
NASA NTRS1987

Nitrogen recombination on high-temperature reusable surface insulation and the analysis of its effect on surface catalysis

The energy transfer catalytic recombination coefficients for nitrogen and oxygen on a borosilicate glass are determined in nitrogen and air hypersonic arc jet streams. These data, obtained from a reacting boundary-layer analysis with first-order surface reaction kinetics, compare well with earlier results from a Goulard frozen boundary-layer model up to 1600 K. The apparent surface recombination rates increase up to 1600 K, then begin to decrease. To illustrate the effects of temperature and nitrogen dissociation on energy transfer to the glass, a diffusional heat-flux is calculated using the present results from 1450 K up to 1850 K. This diffusional heat-flux is the contribution to the total heating rate by atom recombination, and is used to compare the present results with coefficients from three previous studies.

Kolodziej, Paul↗
NASA NTRS1987

The study of excited oxygen molecule gas species production and quenching on thermal protection system materials

The detection of excited oxygen and ozone molecules formed by surface catalyzed oxygen atom recombination and reaction was investigated by laser induced fluorescence (LIF), molecular beam mass spectrometric (MBMS), and field ionization (FI) techniques. The experiment used partially dissociated oxygen flows from a microwave discharge at pressures in the range from 60 to 400 Pa or from an inductively coupled RF discharge at atmospheric pressure. The catalyst materials investigated were nickel and the reaction cured glass coating used for Space Shuttle reusable surface insulation tiles. Nonradiative loss processes for the laser excited states makes LIF detection of O2 difficult such that formation of excited oxygen molecules could not be detected in the flow from the microwave discharge or in the gaseous products of atom loss on nickel. MBMS experiments showed that ozone was a product of heterogeneous O atom loss on nickel and tile surfaces at low temperatures and that ozone is lost on these materials at elevated temperatures. FI was separately investigated as a method by which excited oxygen molecules may be conveniently detected. Partial O2 dissociation decreases the current produced by FI of the gas.

Nordine, Paul C.↗
NASA NTRS1979

Associative ionization of N/2D/ and O

Recent laboratory measurements have shown that N(2P) atoms, and thus probably hot N(2D) atoms, will recombine with atomic oxygen via an associative ionization process at the gas kinetic rate. In the present paper the likelihood of the associative ionization of N(2D) and O playing a significant role in the normal ionosphere is investigated in the light of several recent studies. It is concluded that the associative ionization process is not an important factor and that a more probable cause for disagreements in the various determinations of the recombination coefficient, is the difference in excited states of the ions in the various experiments.

Torr, M. R.↗
NASA NTRS1960

Variation with Temperature of the Recombination of Oxygen Atoms on a Platinum Surface

The development of vehicles capable of flight at high Mach speeds and at extreme altitudes has re-stimulated interest in the "catalytic efficiency" of metals for recombination of atomic species of hydrogen, oxygen, and nitrogen. Most of the work to date has been of an exploratory nature, comparing the relative efficiencies of the different metals.

Fryburg, George C.↗
DOE OSTI2025

Measurement and Modeling of Electron Temperature in Laboratory Photoionized Plasmas Relevant to Astrophysics

The electron temperature of photoionized plasmas characterizes the thermalization of photoelectrons, impacts the charge-state distribution, emissivity, and opacity through atomic recombination processes, and is needed to perform detailed comparisons with theory predictions. We discuss temperature measurements in laboratory photoionized plasmas and a comparison with model calculations done with several theory approximations and codes. These include a radiation-hydrodynamics simulation and two nonequilibrium heating and ionization models that tracked the evolution of the internal energy of the electrons. Furthermore, for the same physics model and X-ray flux time history, calculations were performed assuming steady-state or time-dependent conditions. The time history of steady-state results correlates with that of the X-ray flux, while that of the time-dependent cases does not, and it is qualitatively and quantitatively different from the steady-state case. Steady-state results significantly overestimated temperature measurements, while time-dependent results produced better approximations, which suggests the importance of transient effects in the experiment and also the need for time-resolved measurements.

Laboratory astrophysics↗