SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A slow positron flux generator for positron annihilation spectroscopic measurements in thin polymer films is described. The advantages of this generator include operability at room temperature and atmospheric pressure without special test film preparaton requirements.
Rapid exciton–exciton annihilation (EEA) in two-dimensional semiconductors limits access to high-density excitonic regimes essential for efficient optoelectronic operation under strong excitation. Here, we show that EEA is strongly suppressed in rhombohedral (3R)-stacked MoS 2 bilayers relative to nonpolar 2H bilayers, and that this suppression is quantitatively consistent with repulsive dipole–dipole interactions between layer-polarized excitons induced by spontaneous polarization. Using ultrafast pump–probe spectroscopy, we measure an EEA rate of γ EEA = (5.03 ± 0.99) × 10 –3 cm 2 s –1 in 3R bilayers, which is approximately 18.2-fold smaller than that in monolayers and 2.9-fold smaller than that in nonpolar 2H bilayers. Despite the higher exciton diffusivity recently reported for 3R relative to 2H bilayers, the reduced EEA rate in 3R indicates a rate-limited regime governed by the close-encounter annihilation probability rather than diffusion. A rate-limited annihilation model incorporating a dipole–dipole repulsive potential captures the observed ratio γ EEA,3R /γ EEA,2H ≈ 0.35 for an exciton–exciton encounter distance of ∼1.3 nm, consistent with the bilayer exciton Bohr radius. These results indicate that spontaneous polarization in 3R-stacked bilayers can suppress nonlinear excitonic losses and provide a route toward high-density excitonics.
Important aspects of quantum chromodynamics (QCD) factorization theorems are the properties of the objects involved that can be identified as universal. One example is that the definitions of parton densities and fragmentation functions for different types of hadrons differ only in the identity of the nonperturbative states that form the matrix elements, but are otherwise the same. This leads to independence of perturbative calculations on nonperturbative details of external states. It also lends support to interpretations of correlation functions as encapsulations of intrinsic nonperturbative properties. These characteristics have usually been presumed to still hold true in fragmentation functions even when the observed nonperturbative state is a small-mass cluster of n hadrons rather than simply a single isolated hadron. However, the multidifferential aspect of cross sections that rely on these latter types of fragmentation functions complicates the treatment of kinematical approximations in factorization derivations. That has led to recent claims that the operator definitions for fragmentation functions need to be modified from the single hadron case with nonuniversal prefactors. With such concerns as our motivation, we retrace the steps for factorizing the unpolarized semi-inclusive e + e − annihilation cross section and confirm that they do apply without modification to the case of a small-mass multihadron observed in the final state. In particular, we verify that the standard operator definition from single hadron fragmentation, with its usual prefactor, remains equally valid for the small-mass n -hadron case with the same hard parts and evolution kernels, whereas the more recently proposed definitions with nonuniversal prefactors do not. Our results reaffirm the reliability of most past phenomenological applications of dihadron fragmentation functions. Published by the American Physical Society 2025
A search has been performed for the semileptonic decays D 0 → K S 0 K − e + ν e , D + → K S 0 K S 0 e + ν e , and D + → K + K − e + ν e , using 7.9 fb − 1 of e + e − annihilation data collected at the center-of-mass energy s = 3.773 GeV by the BESIII detector operating at the BEPCII collider. No significant signals are observed, and upper limits are set at the 90% confidence level of 2.13 × 10 − 5 , 1.54 × 10 − 5 , and 2.10 × 10 − 5 for the branching fractions of D 0 → K S 0 K − e + ν e , D + → K S 0 K S 0 e + ν e , and D + → K + K − e + ν e , respectively. Published by the American Physical Society 2024
The basic theory of aeroacoustics of homentropic fluid media is applied to the problems of sound scattering, production, and stimulated emission. A general theory of scattering from low speed three-dimensional vortex flows is presented. Specific results are given for the horseshoe vortex and vortex ring. The noise of an elementary corotating vortex pair in various flows is calculated. It is shown that a potential flow and shear flow can substantially increase the basic pair noise. Small reverse shears can annihilate vortex pairs and eliminate the pair noise mechanism. The pair results are used to explain qualitatively the operation of noise suppression devices. The stimulated emission of a single vortex pair and four and six vortex arrays is demonstrated. The results for six vortices illustrate how external pure tones can amplify the broadband noise of a jet in agreement with recent experimental evidence.
This is a personal account of the development of our buffer-gas positron trap and the new generation of cold beams that these traps enabled. Dick Drachman provided much appreciated advice to us from the time we started the project. The physics underlying trap operation is related to resonances (or apparent resonances) in positron-molecule interactions. Amusingly, experiments enabled by the trap allowed us to understand these processes. The positron-resonance "box score" to date is one resounding "yes," namely vibrational Feshbach resonances in positron annihilation on hydrocarbons; a "probably" for positron-impact electronic excitation of CO and NZ;an d a "maybe" for vibrational excitation of selected molecules. Two of these processes enabled the efficient operation of the trap, and one almost killed it in infancy. We conclude with a brief overview of further applications of the trapping technology discussed here, such as "massive" positron storage and beams with meV energy resolution.
The concept of competitiveness is considered as a function of both high quality and low cost, and the techniques which drive a design simultaneously in both directions. In order to examine these techniques, the term 'genopersistation', which is derived from the words 'genesis' and 'persistence' and defined to mean the bringing forth, sustaining, and eventual annihilation of something. For a product, the term includes the conceptual design, design development, test and evaluation, production, deployment, operation, support, evolution, and retirement of product. The techniques are summarized which can be used to simultaneously genopersistate both the high quality and low cost into a product. Attention is given to Taguchi (1986) methods, the response surface methodology (Montgomery, 1984), Quality Function Deployment (Akao, 1990), Hoshin Kanari (Akao, 1991), activity based costing (O'Guin, 1991), concurrent engineering (Carter and Baker, 1991), and multidisciplinary optimization (Evans, 1984).
Designed to support parallel discrete-event simulation, TWOS is complete implementation of Time Warp mechanism - distributed protocol for virtual time synchronization based on process rollback and message annihilation.
Matter-antimatter annihilation releases more energy per unit mass than any other method of energy production, making it an attractive energy source for spacecraft propulsion. In the magnetically confined plasma engine, antiproton beams are injected axially into a pulsed magnetic mirror system, where they annihilate with an initially neutral hydrogen gas. The resulting charged annihilation products transfer energy to the hydrogen propellant, which is then exhausted through one end of the pulsed mirror system to provide thrust. The calculated energy transfer efficiencies for a low number density (10(14)/cu cm) hydrogen propellant are insufficient to warrant operating the engine in this mode. Efficiencies are improved using moderate propellant number densities (10(16)/cu cm), but the energy transferred to the plasma in a realistic magnetic mirror system is generally limited to less than 2 percent of the initial proton-antiproton annihilation energy. The energy transfer efficiencies are highest for high number density (10(18)/cu cm) propellants, but plasma temperatures are reduced by excessive radiation losses. Low to moderate thrust over a wide range of specific impulse can be generated with moderate propellant number densities, while higher thrust but lower specific impulse may be generated using high propellant number densities. Significant mass will be required to shield the superconducting magnet coils from the high energy gamma radiation emitted by neutral pion decay. The mass of such a radiation shield may dominate the total engine mass, and could severely diminish the performance of antiproton powered engines which utilize magnetic confinement. The problem is compounded in the antiproton powered plasma engine, where lower energy plasma bremsstrahlung radiation may cause shield surface ablation and degradation.
The motivation for studying close vortex interactions is briefly discussed in the light of turbulence and coherent structures. Particular attention is given to the interaction known as reconnection. Two reconnection mechanisms are discussed. One is annihilation of vorticity by cross-diffusion, the other is an inviscid head-tail formation. At intermediate Reynolds numbers both mechanisms are operating.
Abstract Methylammonium lead tribromide (MAPbBr 3 ) stands out as the most easily grown wide‐band‐gap metal halide perovskite. It is a promising semiconductor for room‐temperature gamma‐ray ( γ ‐ray) spectroscopic detectors, but no operational devices are realized. This can be largely attributed to a lack of understanding of point defects and their influence on detector performance. Here, through a combination of crystal growth design and defect characterization, including positron annihilation and impedance spectroscopy, the presence of specific point defects are identified and correlated to detector performance. Methylammonium (MA) vacancies, MA interstitials, and Pb vacancies are identified as the dominant charge‐trapping defects in MAPbBr 3 crystals, while Br vacancies caused doping. The addition of excess MABr reduces the MA and Br defects and so enables the detection of energy‐resolved γ ‐ray spectra using a MAPbBr 3 single‐crystal device. Interestingly, the addition of formamidinium (FA) cations, which converted to methylformamidinium (MFA) cations by reaction with MA + during crystal growth further reduced MA defects. This enabled an energy resolution of 3.9% for the 662 keV 137 Cs line using a low bias of 100 V. The work provides direction toward enabling further improvements in wide‐bandgap perovskite‐based device performance by reducing detrimental defects.
Reconnection is one of the key nonlinear processes in a plasma, in which great amounts of magnetic energy can be rapidly transformed and released via a change in magnetic topology. Field lines of opposite polarity flow together, annihilate, and release pent-up magnetic stress. Snapshots from one of our 2D test simulations (Fig 1) demonstrate key stages in magnetic reconnection. First, antiparallel magnetic field lines are brought together by an inflow in the z direction (the “upstream”). Second, the field lines begin reconnecting and an outflow forms in the x direction (the “downstream”). Finally, in the fully nonlinear stage, structures known as plasmoids are formed.
The present discussion is based on a study of the magnetic field data obtained with the aid of the magnetic field satellite Magsat, deployed in October 1979, over most of the earth during a 7.5-month mission. Inversions using spherical harmonic coefficients are considered along with the inversion of residual fields. In order to perform the correct operation, it is necessary to add on to the source function produced by the inversion process a magnetization function which has no external field. Such a function is known as an annihilator. The use of the annihilator for Pacific Ocean anomalies is discussed. Attention is given to models of oceanic crustal magnetization, and continental long-wavelength anomalies. It is found that in continental regions the annihilator is also useful if induced magnetizations are thought to be responsible for the long-wavelength anomaly.
This report summarized work carried out to investigate mechanisms relevant to fragmentation of high burnup UO 2 fuel. High pressure bubbles that form in high burnup structure are thought to be responsible for fragmentation and pulverization, when exposed to a temperature ramp during a transient. The over-pressurization of the bubbles during normal operation is a pre-requisite for this mechanism to occur. Therefore, in this work we investigate the role of interstitials, produced through irradiation, in over-pressurizing the bubbles by using a combined molecular dynamics (MD) and cluster dynamics approach. Firstly, the energies for the annihilation of interstitials and vacancies at bubbles have been determined from MD as a function of bubble pressure. Secondly, these reaction energies have been implemented in the cluster dynamics code Centipede to determine the steady-state defect concentrations and bubble pressure under irradiation. It was found that there is a transition from low pressure bubbles, at high temperature, to high pressure bubbles, at low temperatures. This indicates the formation of over-pressurized bubbles in the low temperature periphery of the pellet, where high burnup structure forms. This result supports the hypothesis that over-pressurized bubbles form during steady-state operation and can then contribute to fragmentation during a transient. Future work will examine the influence of bubble pressure on Xe diffusion and study the impact of other sinks (e.g. grain boundaries and dislocations) that are relevant to high burnup structure. Ultimately, the goal is to provide predictions of the bubble pressure as a function of burnup that can be used to derive a more mechanistic fragmentation threshold for use in BISON.
We report thatpProbing is a general technique that is used to reduce the variance of the Hutchinson stochastic estimator for the trace of the inverse of a large, sparse matrix A. The variance of the estimator is the sum of the squares of the off-diagonal elements of A -1 . Therefore, this technique computes probing vectors that when used in the estimator annihilate the largest off-diagonal elements. For matrices that display decay of the magnitude of |A$^{-1}_{ij}$| with the graph distance between nodes i and j, this is achieved through graph coloring of increasing powers A k . Equivalently, when a matrix stems from a lattice discretization, it is computationally beneficial to find a distance-k coloring of the lattice. Previously, a hierarchical coloring was proposed so that k can be increased at runtime as needed without discarding previous work. In this work, we study probing for the more general problem of computing the trace of a permutation of A -1 , say PA -1 . The motivation comes from lattice quantum chromodynamics (QCD), where we need to construct “disconnected diagrams” to extract flavor-separated generalized parton functions. In lattice QCD, where the matrix has a four-dimensional toroidal lattice structure, these nonlocal operators correspond to a PA -1 , where P is the permutation relating to some displacement $\vec{p}$ in one or more dimensions. We focus on a single dimension displacement (p), but our methods are general. We show that probing on A k or (PA) k does not annihilate the largest magnitude elements. To resolve this issue, our displacement-based probing works on PA k using a new coloring scheme that works directly on appropriately displaced neighborhoods on the lattice. We prove lower bounds on the number of colors needed and study the effect of this scheme on variance reduction, both theoretically and experimentally on a real-world lattice QCD calculation. We achieve orders of magnitude speedup over the unprobed or the naively probed methods.
Photochemical upconversion (UC) through triplet–triplet annihilation (TTA), which employs a visible absorbing triplet photosensitizer and an annihilator, is a process that generates a high energy photon from two lower energy photons. TTA-UC has been largely developed in pure organic solvents and solid-state polymeric constructs while featuring near exclusive use of rare and expensive metals within the photosensitizer. In this current investigation, we demonstrate that TTA-UC from the long lifetime earth-abundant photosensitizer [Cu(dsbtmp) 2 ](PF) 6 (dsbtmp = 2,9-di(sec-butyl)-3,4,7,8-tetramethyl-1,10-phenanthroline), abbreviated as Cu-PS, functions in water through encapsulation within a cationic-based assembly. Cetyltrimethylammonium bromide was the surfactant of choice as it electrostatically binds the negatively charged water-soluble 10-phenylanthracene-9-carboxylate (PAC) acceptor/annihilator and ultimately facilitates energy transfer across the interface. Efficient triplet–triplet energy transfer (TTET) from Cu-PS to the PAC acceptor was achieved in this aqueous assembly. Unfortunately, the hindered mobility of the PAC moieties ultimately hampered the annihilation process, and this was reflected in attenuated TTA rates and efficiencies. The combined experimental data illustrated that the water-soluble PAC acceptor was able to vectorially deliver the excited-state energy stored in Cu-PS across the interface into the bulk aqueous solution by engaging in excited-state electron transfer with methyl viologen acceptors. Lastly, these results are important for remotely operating photoredox reactions in water while rendering a photosensitizer spatially isolated in the hydrophobic core of a micelle.
Hadronic matter makes about 14% of the known universe. The remaining 86% is Dark Matter (DM). Since it does not interact with the ordinary matter via electromagnetic force, DM is not visible and, to date, it escaped detection. The search for Dark Matter (DM) is one of the hottest topic in modern physics. Despite the increasing number of astrophysical and cosmological observations proving the existence, so far no particle physics experiment has detected DM yet. Up to now, most of the experimental efforts have been focused on the so called WIMP (Weakly Interacting Massive Particle) paradigm, which predicts heavy DM (10 GeV-10 TeV mass range) interacting with Standard Model (SM) particles via the weak force mediators (W or Z bosons). More recently, due to the lack of clear evidence of WIMPs, other models of DM gained the interest of the physics community. These models consider Light DM particles (LDM), in MeV-GeV mass range. Among LDM theories, the Dark Photon theory predicts the existence of a Dark Sector interacting with SM particles via a new massive vector boson (Dark Photon, Heavy Photon or A0), mediator of a new force. This scenario, despite being theoretically well motivated, is remarkably experimentally unexplored. The Beam Dump eXperiment (BDX), is an approved experiment at Jefferson Lab (JLab), aiming to discover the DM predicted witihn the Dark Photon theory. The experiment uses the CEBAF (Continuous Electron Beam Accelerator Facility) 11 GeV electron beam, impinging on the JLab Hall-A beam-dump, to produce a beam of DM particles, detected by a ~ 1 m3 detector made of thallium doped cesium iodide (CsI(Tl)) crystals located ~ 20 m downstream. In order to achieve excellent background rejection, the experimental setup includes active vetos and passive shielding surrounding CsI(Tl) crystals. Given the weakness of the DM-SM interaction, the scattering of a DM particle in the BDX detector is a rare event. Therefore, the characterization of the expected background is a critical aspect of the experiment. Both cosmogenic and penetrating SM particles produced by the beam interaction in the dump contribute to the background of the experiment. While the cosmogenic contribution can be measured during the experiment when the beam is off, beam-related background can only be estimated via Monte Carlo (MC) simulations. Therefore, a careful assessment of possible systematics introduced by the MC is needed. The beam-correlated background characterization was made by measuring the muon flux produced by the interaction of the CEBAF beam with Hall-A dump in a dedicated experimental campaign in spring 2018 [1]. The comparison to the ?ux predicted by MC allowed us to validate the BDX simulation framework. The reach of BDX, i.e. the region that the experiment can probe in the LDM theory parameter space, depends critically on the background rejection capability and signal detection effciency. For this reason, the detector setup was fine-tuned through a dedicated study. The response to LDM and background events was evaluated for different setups and selection cuts. As a result of this procedure, the configuration resulting in the best sensitivity was selected [2]. The reach calculation was performed taking into account the different LDM production mechanisms, including the contribution of secondary particles produced in the beam-dump. In particular, the effect of the secondary positrons annihilation was found to be extremely significant. In the majority of the sensitivity studies, this contribution is neglected, but recent results [3] [4] demonstrated that this process significantly enhances the sensitivity of lepton beam-dump experiments. Currently, the BDX collaboration is focused on the deployment and operation of a small detector, called BDX-MINI, built to perform a preliminary physics measurement searching for LDM at JLab. This test will pave the way to the realization of the full BDX experiment. The measurement is currently ongoing but results are expected by the end of this year. During my PhD I was involved in all aspects of the BDX experiment: design, simulation, prototyping and data analysis. The main results of my work are reported in this thesis. This manuscript is organized as follows: the first Chapter provides an introduction to the theory of LDM, with particular attention to the Dark Photon paradigm; the second Chapter illustrates the BDX experimental setup, the LDM production and detection mechanisms and the expected backgrounds; Chapter 3 and 4 describe, respectively, the BDX-HODO measurement, with a detailed description of the simulations, and the BDX experimental setup and analysis cuts optimization. Chapter 5 reports about BDXMINI detector characterization, calibration and sensitivity estimate. Finally, Chapter 6 describes in detail the calculation of the secondary positron annihilation contribution to the sensitivity of BDX and other electron-beam thick-target experiment.
Spontaneous orientational polarization (SOP) in the electron-transport layer (ETL) of organic light-emitting diodes (OLEDs) is increasingly recognized as a key factor influencing their performance. Here, we show that SOP is dramatically reduced in the common electron-transport material 2,2',2"-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) by coevaporating it together with medium-density polyethylene. Eliminating SOP from the ETL of blue fluorescent OLEDs in this manner reduces their operating voltage by 0.5 V, increases their external quantum efficiency (EQE) by 30%, and leads to a threefold increase in device lifetime. We show that the EQE and lifetime improvements both originate from reduced exciton-polaron annihilation in the emissive layer, and that this leads to a functional relationship between the two quantities that can be used to quantify the rate of annihilation-induced degradation in the device. Furthermore, these results highlight a substantial opportunity to improve OLED performance by controlling SOP through semiconductor dilution and suggest that this capability can be used to systematically isolate and understand exciton-polaron degradation in the pursuit of stable blue OLEDs.