Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALTITUDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1954

Altitude Performance and Operational Characteristics of an XT38-A-2 Turboprop Engine

The overall engine performance and the starting and windmilling characteristics of an XT38-A-2 turboprop engine have been investigated in the NACA Lewis altitude wind tunnel. The simulated flight conditions ranged from altitudes of 5000 to 45,000 feet at a flight Mach number of 0.30 and from Mach numbers of 0.301 to 0.557 at an altitude of 35,000 feet. The engine, equipped with a standard-area exhaust nozzle, was operated with independent control of fuel flow and propeller pitch; operation was thereby allowed over a wide range of engine conditions. Windmilling characteristics were obtained at altitudes of 15,000 feet and 35,000 feet. Analysis of the performance maps obtained at each flight condition revealed that both altitude and flight Mach number had a major effect on corrected engine variables. The large reductions in corrected shaft horsepower occurring when the altitude was increased were the result of decreases in compressor and turbine efficiencies. Windmilling engine starts were made at altitudes as high as 35,000 feet at an engine speed of 2000 rpm.

Essig, R H↗
NASA NTRS1927

Tables for calibrating altimeters and computing altitudes based on the standard atmosphere

During 1925 the assumption of an isothermal atmosphere which was in general use as the standard for the calibration of altimeters in the United States was replaced by a standard atmosphere which assumes an altitude-temperature relation closely corresponding to the average of upper air observations at latitude 40 degrees in this country. The same standard atmosphere had already been adopted somewhat earlier in the United States as the aircraft performance standard. National Advisory Committee for Aeronautics Technical Reports nos. 147 and 218 give necessary constants, tables, and information. However, neither of these reports includes all of the tables required for the computation of actual altitudes nor those readily suitable for use in calibrating altimeters, since the altitude intervals for which data are given are not sufficiently small. The present report has been prepared specifically for these purposes. The formulas which define the standard atmosphere are given in this report, together with other formulas giving the corrections to be applied to the standard altitude in order to obtain the actual altitude when the necessary observations of pressure and temperature are available. The tables necessary for the use of this standard atmosphere in calibrating altimeters and in computing altitudes form the principal part of this report. An example of the computation of actual altitudes from observed pressures and temperatures are given in table IV.

Brombacher, W G↗
NASA NTRS1994

Height and altitude distribution of large volcanoes on Venus

Magellan data reveal 156 large volcanoes on Venus (greater than 100 km in diameter) which range in height from 300 m to 5.55 km, with an average height of 1.42 km. On the basis of theory it has been predicted that the development of neutral buoyancy zones (NBZ) on Venus and thus the resulting volcanic deposits are strongly influenced by the altitude-controlled variations in surface pressure. The distribution and height of these large volcanoes as a function of altitude was examined to begin to test these predications. Although large volcanoes are relatively uniformly distributed in altitude, there may be a slight paucity of volcanoes at the lowest elevations and a slight surplus at mid-altitudes. In addition, it is observed that the volcanoes at the highest altitudes tend to be the tallest. The observed distributions at low-mid altitudes is consistent with the prediction of NBZ theory. The high altitude distribution and heights, however, emphasize the necessity of considering other factors, such as tectonic setting, edifice age, magma supply, and thermal gradient, in describing the location and development of large volcanoes on Venus.

Keddie, S. T.↗
NASA NTRS2003

High Altitude Launch for a Practical SSTO

Existing engineering materials allow the construction of towers to heights of many kilometers. Orbital launch from a high altitude has significant advantages over sea-level launch due to the reduced atmospheric pressure, resulting in lower atmospheric drag on the vehicle and allowing higher rocket engine performance. High-altitude launch sites are particularly advantageous for single-stage to orbit (SSTO) vehicles, where the payload is typically 2% of the initial launch mass. An earlier paper enumerated some of the advantages of high altitude launch of SSTO vehicles. In this paper, we calculate launch trajectories for a candidate SSTO vehicle, and calculate the advantage of launch at launch altitudes 5 to 25 kilometer altitudes above sea level. The performance increase can be directly translated into increased payload capability to orbit, ranging from 5 to 20% increase in the mass to orbit. For a candidate vehicle with an initial payload fraction of 2% of gross lift-off weight, this corresponds to 31% increase in payload (for 5-km launch altitude) to 122% additional payload (for 25-km launch altitude).

Landis, Geoffrey A.↗
NASA NTRS2007

A Start Toward Micronucleus-Based Decompression Models; Altitude Decompression

Do gaseous micronuclei trigger the formation of bubbles in decompression sickness (DCS)? Most previous instructions for DCS prevention have been oriented toward supersaturated gas in tissue. We are developing a mathematical model that is oriented toward the expected behavior of micronuclei. The issue is simplified in altitude decompressions because the aviator or astronaut is exposed only to decompression, whereas in diving there is a compression before the decompression. The model deals with four variables: duration of breathing of 100% oxygen before going to altitude (O2 prebreathing), altitude of the exposure, exposure duration, and rate of ascent. Assumptions: a) there is a population of micronuclei of various sizes having a range of characteristics, b) micronuclei are stable until they grow to a certain critical nucleation radius, c) it takes time for gas to diffuse in or out of micronuclei, and d) all other variables being equal, growth of micronuclei upon decompression is more rapid at high altitude because of the rarified gas in the micronuclei. To estimate parameters, we use a dataset of 4,756 men in altitude chambers exposed to various combinations of the model s variables. The model predicts occurrence of DCS symptoms quite well. It is notable that both the altitude chamber data and the model show little effect of O2 prebreathing until it lasts more than 60 minutes; this is in contrast to a conventional idea that the benefit of prebreathing is directly due to exponential washout of tissue nitrogen. The delay in response to O2 prebreathing can be interpreted as time required for outward diffusion of nitrogen; when the micronuclei become small enough, they are disabled, either by crushing or because they cannot expand to a critical nucleation size when the subject ascends to altitude.

Van Liew, H. D.↗
NASA NTRS1947

Performance Investigation of TG-180 Combustor: I - Instrumentation, Altitude Operational Limits and Combustion Efficiency

A brief investigation has been made of the performance of a single combustor of the TG-180 turboJet engine to determine (a) the altitude operational limits of the engine for two fuels (AN-F-32 and AN-F-28), (b) combustion efficiencies at various simulated conditions of altitude and engine speeds, (c) combustion-outlet temperature distribution for several altitudes at constant engine speed, and (d) the combustor total pressure drop The limits with AN-83-F-32 fuel were found to be approximately 60,000 feet for an engine speed of 6000 rpm and approximately 38,000 feet for an engine speed of 1000 rpm. The results indicated that the altitude operational limits with AN-F-32 fuel are higher over the largest part of the engine-speed range than with AN-F-28 fuel, A combination efficiency of 22 percent was obtained at rated engine speed (7600 rpm) and an altitude of 20,000 feet with AN-F-32 fuel. A change in altitude from 20,000 tm 60,000 feet showed a 20-percent decrease in combustion efficiency while the engine was operating at 760G rpm whereas, at an engine speed of 4000 rpm a change of altitude from 10,000 to 40,000 feet showed a 52-percent decrease in combustion efficiency .

Zettle, Eugene V.↗
NASA NTRS1954

Preliminary Altitude Operational Characteristics of a J57-P1 Turbojet Engine

The operational characteristics of a J57-P1 turbojet engine have been investigated at altitudes between 15,000 and 66,000 feet in the Lewis altitude wind tunnel. Included in this study is a discussion of fuel nozzle coking, the altitude operating limits with and without the standard engine control, the compressor surge characteristics, and the engine starting and windmilling characteristics. Severe circumferential turbine outlet temperature gradients which occurred at high altitude as a result of fuel nozzle coking were alleviated by the manufacturer's change in the fuel flow divider schedule and in a nozzle gasket material. Compressor air bleed is required to prevent surge of the outboard compressor in the low engine speed region. The maximum altitude at which the engine was operated without the control was about 66,000 feet at 0.8 flight Mach number and at a reduced engine speed to avoid compressor surge; with the engine control in operation, the altitude operating limit is reduced to approximately 59,000 feet. The maximum altitude at which the engine was started was about 40,000 feet.

Wallner, Lewis E.↗
NASA NTRS2003

High Altitude Launch for a Practical SSTO

Existing engineering materials allow the construction of towers to heights of many kilometers. Orbital launch from a high altitude has significant advantages over sea-level launch due to the reduced atmospheric pressure, resulting in lower atmospheric drag on the vehicle and allowing higher rocket engine performance. high-altitude launch sites are particularly advantageous for single-stage to orbit (SSTO) vehicles, where the payload is typically 2% of the initial launch mass. An earlier paper enumerated some of the advantages of high altitude launch of SSTO vehicles. In this paper, we calculate launch trajectories for a candidate SSTO vehicle, and calculate the advantage of launch at launch altitudes 5 to 25 kilometer altitudes above sea level. The performance increase can be directly translated in to increased payload capability to orbit, ranging from 5 to 20% increase in the mass to orbit. For a candidate vehicle with an initial payload fraction of 2% of gross lift-off weight, this corresponds to 31 % increase in payload (for 5-km launch altitude) to 122% additional payload (for 25-km launch altitude).

Landis, Geoffrey A.↗
NASA NTRS2003

High Altitude Launch for a Practical SSTO

Existing engineering materials allow the construction of towers to heights of many kilometers. Orbital launch from a high altitude has significant advantages over sea-level launch due to the reduced atmospheric pressure, resulting in lower atmospheric drag on the vehicle and allowing higher rocket engine performance. High-altitude launch sites are particularly advantageous for single-stage to orbit (SSTO) vehicles, where the payload is typically 2 percent of the initial launch mass. An earlier paper enumerated some of the advantages of high altitude launch of SSTO vehicles. In this paper, we calculate launch trajectories for a candidate SSTO vehicle, and calculate the advantage of launch at launch altitudes 5 to 25 kilometer altitudes above sea level. The performance increase can be directly translated into increased payload capability to orbit, ranging from 5 to 20 percent increase in the mass to orbit. For a candidate vehicle with an initial payload fraction of 2 percent of gross lift-off weight, this corresponds to 31 percent increase in payload (for 5-kilometer launch altitude) to 122 percent additional payload (for 25-kilometer launch altitude).

Landis, Geoffrey A.↗
NASA NTRS2016

Unmanned Aerial Systems Traffic Management (UTM): Safely Enabling UAS Operations in Low-Altitude Airspace

Currently, there is no established infrastructure to enable and safely manage the widespread use of low-altitude airspace and UAS flight operations. Given this, and understanding that the FAA faces a mandate to modernize the present air traffic management system through computer automation and significantly reduce the number of air traffic controllers by FY 2020, the FAA maintains that a comprehensive, yet fully automated UAS traffic management (UTM) system for low-altitude airspace is needed. The concept of UTM is to begin by leveraging concepts from the system of roads, lanes, stop signs, rules and lights that govern vehicles on the ground today. Building on its legacy of work in air traffic management (ATM), NASA is working with industry to develop prototype technologies for a UAS Traffic Management (UTM) system that would evolve airspace integration procedures for enabling safe, efficient low-altitude flight operations that autonomously manage UAS operating in an approved low-altitude airspace environment. UTM is a cloud-based system that will autonomously manage all traffic at low altitudes to include UASs being operated beyond visual line of sight of an operator. UTM would thus enable safe and efficient flight operations by providing fully integrated traffic management services such as airspace design, corridors, dynamic geofencing, severe weather and wind avoidance, congestion management, terrain avoidance, route planning re-routing, separation management, sequencing spacing, and contingency management. UTM removes the need for human operators to continuously monitor aircraft operating in approved areas. NASA envisions concepts for two types of UTM systems. The first would be a small portable system, which could be moved between geographical areas in support of operations such as precision agriculture and public safety. The second would be a Persistent system, which would support low-altitude operations in an approved area by providing continuous automated coverage. Both would require persistent communication, navigation, and surveillance (CNS) coverage to track, ensure, and monitor conformance. UTM is creating an airspace management tool that allows the ATM system to accommodate the number of UAS that will operate in the low altitude airspace. The analogy is just because we have a car, whether its autonomous or someone is driving, does not diminish the need for a road or road signs or rules of the road.

traffic management↗
NASA NTRS2018

Exploring the Limits of High Altitude GPS for Future Lunar Missions

An increasing number of spacecraft are relying on the Global Positioning System (GPS) for navigation at altitudes near or above the GPS constellation itself - the region known as the Space Service Volume (SSV). While the formal definition of the SSV ends at geostationary altitude, the practical limit of high-altitude space usage is not known, and recent missions have demonstrated that signal availability is sufficient for operational navigation at altitudes halfway to the moon. This paper presents simulation results based on a high-fidelity model of the GPS constellation, calibrated and validated through comparisons of simulated GPS signal availability and strength with flight data from recent high-altitude missions including the Geostationary Operational Environmental Satellite 16 (GOES-16) and the Magnetospheric Multiscale (MMS) mission. This improved model is applied to the transfer to a lunar near-rectilinear halo orbit (NRHO) of the class being considered for the international Deep Space Gateway concept. The number of GPS signals visible and their received signal strengths are presented as a function of receiver altitude in order to explore the practical upper limit of high-altitude space usage of GPS.

Deep Spac↗
NASA NTRS2018

Exploring the Limits of High Altitude GPS for Future Lunar Missions

An increasing number of spacecraft are relying on the Global Positioning System (GPS) for navigation at altitudes near or above the GPS constellation itself - the region known as the Space Service Volume (SSV). While the formal definition of the SSV ends at geostationary altitude, the practical limit of high-altitude space usage is not known, and recent missions have demonstrated that signal availability is sufficient for operational navigation at altitudes halfway to the moon. This paper presents simulation results based on a high-fidelity model of the GPS constellation, calibrated and validated through comparisons of simulated GPS signal availability and strength with flight data from recent high-altitude missions including the Geostationary Operational Environmental Satellite 16 (GOES-16) and the Magnetospheric Multiscale (MMS) mission. This improved model is applied to the transfer to a lunar near-rectilinear halo orbit (NRHO) of the class being con- sidered for the international Deep Space Gateway concept. The number of GPS signals visible and their received signal strengths are presented as a function of receiver altitude in order to explore the practical upper limit of high-altitude space usage of GPS.

Deep Spac↗
NASA NTRS2019

Analysis of At-Altitude LTE Power Spectra for C2 Communications for UAS Traffic Management

The National Aeronautics and Space Administration’s (NASA) Unmanned Aircraft Systems Traffic Management (UTM) project works to develop tools and technologies essential for safely enabling civilian low-altitude small Unmanned Aerial Systems (sUAS, also known as drones) operations. This paper presents results of work completed in the paper [1] presented at the 2018 ICNS conference where proposed approaches were explored for evaluating and analyzing sUAS Command and Control (C2) links based on commercial cellular networks. This paper focuses on the UTM Project’s Technology Capability Level 3 (TCL-3) test results which address the communications portion identified within the same paper. A software defined radio (SDR) was flown as a sUAS payload to capture received signal spectrum in Long Term Evolution (LTE) frequency bands of interest. The purpose was to measure the RF environment at UTM altitudes to characterize the interference potential. The SDR payload was flown at various stationary altitudes where the LTE over-the-air complex (I/Q) samples were captured by the SDR and later post-processed. The SDR received inputs through an omnidirectional antenna. The complex samples captured were an aggregate of transmissions received from all line-of-sight (LOS) towers within the geographic area for the specific radio frequency bandwidth the SDR is programmed to capture. Using this approach, the complex samples captured do not distinguish between the various eNodeB's (Long Term Evolution (LTE) transmitting towers). The complex samples were post processed via a Discrete Fourier Transform (DFT) algorithm to view the captured spectrum along with the power levels across the captured LTE bandwidth. This SDR payload process of capturing complex samples was done at two different regions within the US: 1) NASA's Ames Research Center (ARC) in Moffett Field, CA, and 2) Griffiss Airfield in Rome, NY. The data capture at the ARC site was done at two physical locations within the Ames campus where many stationary altitude captures where done as high as 800 ft. above ground level (AGL). The data captured at the Griffiss Airport (also known as the NY Corridor Site) were acquired at one location with three specific stationary altitude levels – {Ground Level (GL), 300 ft., and 400 ft.}. The LTE spectrum power levels were captured for two LTE carriers, AT&T and Verizon, at both sites where their respective spectra and power levels were measured and compared at various altitudes. The overall results show that there is an increase in LTE spectrum power levels at higher altitudes for drones. A detailed analysis of this data and conclusions drawn from the results are presented in this paper.

Kerczewski, Robert J.↗
NASA NTRSDate not supplied

RadBREAD: Radiation Biology Research at an Elevated Altitude through Dosimetry – A student-designed payload

NASA uses extreme environment platforms (ground testing facilities, high-altitude balloons and aircraft, and CubeSats) to provide greater understanding of the conditions and limitations of extra-terrestrial environments. As part of a two-week flight planned for summer 2021, RadBREAD (Radiation Biology Research at an Elevated Altitude through Dosimetry) will fly as a secondary payload consisting of a M-42C (German Aerospace Center, DLR) ionizing radiation dosimeter, UV micro-logger, and multiple desiccated yeast samples. The platform is a novel high-altitude solar-powered aircraft: the Swift Engineering High-Altitude samples. The platform is a novel high-altitude solar-powered aircraft: the Swift Engineering High-Altitude Long-Endurance Unmanned Aircraft System (HALE UAS), which offers significantly longer flight durations than other high-altitude platforms. The yeast Saccharomyces cerevisiae will provide meaningful biological correlation for the sensor readings, due to its resistance to extremely low temperature and pressure when desiccated, ease of genetic manipulation, and homology to human genes. The RadBREAD team comprises the 2020 cohort of NASA’s Space Life Sciences Training Program (SLSTP) research associates as well as NASA scientists, engineers and radiation experts from NASA and the DLR. Yeast survival, metabolic, and transcriptomic changes will be correlated with environmental data collected during long-term exposure to the upper atmosphere. Additionally, the team will evaluate the upper atmospheric environment (radiation, pressure, and temperature) provided by the HALE UAS platform as a Mars surface analog for biological payloads. We hypothesize that exposure to upper atmospheric conditions during the HALE UAS flight will alter the survival, metabolism, and transcriptome of desiccated wild-type S. cerevisiae upon rehydration compared to sensitive and tolerant yeast strains exposed to the same conditions, and between the flight samples compared to asynchronous ground controls.

radiation exposure↗
NASA NTRSDate not supplied

High-Altitude ADS-B/GPS LPV Flight Tests on a NASA ER-2 Research Airplane

The research presented in this paper describes the conceptual design of a system architecture that integrates Automatic Dependent Surveillance-Broadcast (ADS-B) and Global Positioning System (GPS) Localizer Performance Vertical (LPV) guidance technology onto a unique high-altitude research airplane: a United States Air Force (USAF) / Lockheed Martin (Bethesda, Maryland) Aeronautics U-2S airplane. The design features modern display capabilities to provide air-to-air surveillance and precision navigation, to adhere to Federal Aviation Administration (FAA) certification standards for operations in upper Class E airspace. The National Aeronautics and Space Administration (NASA) variant of the U-2S, now called the Earth Resources (ER-2) airplane, remains unrivaled in the art of sustained high-altitude flight for scientific expeditions. Capable of routinely cruising above flight level (FL) 650 that had been considered, at inception, the domain of only the most elite experimental research aircraft types. Nicknamed the Dragon Lady, this U-2S research testbed is still one of the most advanced aircraft in the world. The exceptional military design of the vehicle, security guidelines, and the performance envelope of the ER-2 posed unique challenges to the integration of modern civilian avionics. ADS-B epitomizes the next generation of surveillance technology, incorporating both air and ground aspects. ADS-B provides air traffic control (ATC) with a more accurate picture of the three-dimensional positioning of aircraft in various phases of flight, including en route, terminal, approach, and ground operations. The airborne surveillance system broadcasts its identification, position, altitude, velocity, and other information. GPS LPV represents a significant advancement in aviation technology, emphasizing the pivotal role that GPS and Performance-Based Navigation concepts will play in the foreseeable future. This technology represents a shift from sensor-based navigation to performance-based navigation, allowing for more flexible and efficient use of airspace. This research described herein is structured as follows: Section II, “Systems Background,” provides a systems background and description of an ADS-B and GPS LPV system equipped on the high-altitude ER-2 research airplane to satisfy the FAA airworthiness requirements for high-altitude flight operations. Section III, “Flight Test System,” describes the flight-test airplane systems. Section IV, “Analysis of GPS SBAS, Safety, and Ground Tests,” provides an overview of the GPS Satellite-Based Augmentation System (SBAS) and an analysis of the GPS LPV metrics, safety, and ground tests. Section V, “High-Altitude Flight Tests,” describes the high-altitude flight tests, including 3 flight-test results, analysis, human factors, and lessons learned. Section VI, the conclusion, draws insights from the lessons learned, discusses the design challenges associated with ADS-B and GPS LPV, and showcases the paramount significance of these pivotal technologies in aircraft surveillance and navigation.

Ricardo A. Arteaga↗
NASA NTRS1979

Wind study for high altitude platform design

An analysis of upper air winds was performed to define the wind environment at potential operating altitudes for high altitude powered platform concepts. Wind conditions of the continental United States, Pacific area (Alaska to Sea of Japan), and European area (Norwegian and Mediterranean Sea) were obtained using a representative network of sites selected based upon adequate high altitude sampling, geographic dispersion, and observed upper wind patterns. A data base of twenty plus years of rawinsonde gathered wind information was used in the analysis. Annual variations from surface to 10 mb pressure altitude were investigated to encompass the practical operating range for the platform concepts. Parametric analysis for the United States and foreign areas was performed to provide a basis for vehicle system design tradeoffs. This analysis of wind magnitudes indicates the feasibility of annual operation at a majority of sites and more selective seasonal operation for the extreme conditions between the pressure altitudes of 100 to 25 mb based upon the assumed design speeds.

High altitude powered platform studies↗
NASA NTRS1951

Effects of Altitude on Turbojet Engine Performance

Component and over-all performance characteristics of several turbojet engines investigated in the altitude facilities of the NACA Lewis Laboratory during the last several years are summarized to indicate the effects of altitude on turbojet engine performance. Data presented show that failure of turbojet engine performance to generalize for all altitudes can be traced to reductions in compressor efficiency, corrected air flow, and combustion efficiency at altitude. In addition, it is shown that although engines of different design may have equal thrusts at sea level, the thrusts at altitude may vary widely because of differences in compressor performance characteristics from one engine to another.

COMPRESSORS - EFFICIENCY↗
DOE OSTI2022

The Illumination of Thunderclouds by Lightning: 3. Retrieving Optical Source Altitude

Abstract Optical space‐based lightning sensors such as the Geostationary Lightning Mapper (GLM) detect and geolocate lightning by recording rapid changes in cloud top illumination. While lightning locations can be determined to within a pixel on the GLM imaging array, these instruments are not individually able to natively report lightning altitude. It has previously been shown that thunderclouds are illuminated differently based on the altitude of the optical source. In this study, we examine how altitude information can be extracted from the spatial distributions of GLM energy recorded from each optical pulse. We match GLM “groups” with Lightning Mapping Array (LMA) source data that accurately report the 3‐D positions of coincident Radio‐Frequency (RF) emitters. We then use machine learning methods to predict the mean LMA source altitudes matched to GLM groups using metrics from the optical data that describe the amplitude, breadth, and texture of the group spatial energy distribution. The resulting model can predict the LMA mean source altitude from GLM group data with a median absolute error of <1.5 km, which is sufficient to determine the location of the charge layer where the optical energy originated. This model is able to capture changes to the source altitude distribution in response to convective processes in the thunderstorm, and the GLM predictions can reveal the vertical structure of individual flashes ‐ enabling 3‐D flash geolocation with GLM for the first time. Future work will account for differences in thunderstorm charge/precipitation structures and viewing angle across the GLM Field of View.

54 ENVIRONMENTAL SCIENCES↗