SEARCH · Engineering Papers

Results for “1D”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Inducing Ferrimagnetic Exchange in 1D-FeSe 2 Chains Using Heteroleptic Amine Complexes: [Fe(en)(tren)][FeSe 2 ] 2

[Fe(en)(tren)][FeSe 2 ] 2 (en = ethylenediamine, C 2 H 8 N 2 , tren = tris(2-aminoethyl)amine, C 6 H 18 N 4 ) has been synthesized by a mixed-ligand solvothermal method. Its crystal structure contains heteroleptic [Fe(en)(tren)] 2+ complexes with distorted octahedral coordination, incorporated between 1D-FeSe 2 chains composed of edge–sharing FeSe 4 tetrahedra. The twisted octahedral coordination environment of the Fe–amine complex leads to partial dimerization of Fe–Fe distances in the FeSe 2 chains so that the FeSe 4 polyhedra deviate strongly from the regular tetrahedral geometry. 57 Fe Mössbauer spectroscopy reveals oxidation states of +3 for the Fe chain atoms and +2 for the Fe complex atoms. The close proximity of Fe atoms in the chains promotes ferromagnetic nearest neighbor interactions, as indicated by a positive Weiss constant, θ = +53.8(6) K, derived from the Curie–Weiss fitting. Magnetometry and heat capacity reveal two consecutive magnetic transitions below 10 K. DFT calculations suggest that the ordering observed at 4 K is due to antiferromagnetic intrachain interactions in the 1D-FeSe 2 chains. The combination of two different ligands creates an asymmetric coordination environment that induces changes in the structure of the Fe–Se fragments. Finally, this synthetic strategy opens new ways to explore the effects of ligand field strength on the structure of both Fe-amine complexes and surrounding Fe–Se chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Tuning the Charge Transport Property and Photocatalytic Activity of Anthracene-Based 1D π–d Conjugated Coordination Polymers by Interlayer Stacking

One-dimensional (1D) π–d-conjugated coordination polymers (CCPs) with charge delocalization have attracted significant attention due to their potential application in energy conversion and storage. However, the fundamental understanding of the correlation of their structural parameters with photophysical and photocatalytic properties remains underexplored. Herein, we report three novel Cu-node anthracene-based 1D π–d CCPs with systematic variation of steric groups (Ph > Me > H) at the 9 and 10 position of anthracene (denoted as An Ph , An Me , and An H ), which is aimed at altering the stacking of the polymer chains and its impact on the inter-chain charge transport property. Here, by using the combination of steady-state X-ray absorption spectroscopy, optical transient absorption spectroscopy, X-ray transient absorption spectroscopy, and electrochemical impedance spectroscopy, we show that the linear ligands (An Ph , An Me , and An H ) with different degrees of steric groups (Ph > Me > H) introduced at the 9 and 10 position of anthracene can alter the stacking of the polymer chains and thus impact their crystallinity, charge separation, and charge transport property, which in turn impacts their photocatalytic performance for hydrogen evolution reaction.

1-D-polymer↗

DOE OSTI2021

Flat epitaxial quasi-1D phosphorene chains

The emergence of peculiar phenomena in 1D phosphorene chains (P chains) has been proposed in theoretical studies, notably the Stark and Seebeck effects, room temperature magnetism, and topological phase transitions. Attempts so far to fabricate P chains, using the top-down approach starting from a few layers of bulk black phosphorus, have failed to produce reliably precise control of P chains. We show that molecular beam epitaxy gives a controllable bottom-up approach to grow atomically thin, crystalline 1D flat P chains on a Ag(111) substrate. Scanning tunneling microscopy, angle-resolved photoemission spectroscopy, and density functional theory calculations reveal that the armchair-shaped chains are semiconducting with an intrinsic 1.80 ± 0.20 eV band gap. This could make these P chains an ideal material for opto-electronic devices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Designing 1D multiheme peptide amphiphile assemblies reminiscent of natural systems

We discuss protein assemblies that bind and organize ordered arrays of cofactors yield function structures. Multiheme assemblies found in nature yield electronically conductivity 1D nanoscale fibers and are employed in anaerobic respiration. To understand the fundamental characteristics of these organized arrays, the design of peptide amphiphiles that assemble into 1D nanostructures and yield metalloporphyrin binding sites is presented. One challenge with this class of peptide amphiphiles is identifying the correct sequence composition for high affinity binding with high heme density. Here, the peptide c16-AH(Kx)n-CO 2 H is explored to identify the impact of sequence length (n) and amino acid identity (x = L, I, or F) on binding affinity and midpoint potential. When n = 2, the peptide assembly yields the greatest affinity. The resulting nanoscale assemblies yield ordered arrays of the redox active molecule heme and have potential utility in the development of supramolecular bioelectronic materials useful in sensing as well as the development of enzymatic materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2021

Coupling 1D xRAGE simulations with machine learning for graded inner shell design optimization in double shell capsules

Advances in machine learning provide the ability to leverage data from expensive simulations of high-energy-density experiments to significantly cut down on computational time and costs associated with the search for optimal target designs. This study presents an application of cutting-edge Bayesian optimization methods to the one-dimensional (1D) design optimization of double shell graded layer targets for inertial confinement fusion experiments. This investigation attempts to reduce hydrodynamic instabilities while retaining high yields for future NIF experiments. Machine learning methods can use predictive physics simulations to identify graded layer designs from within the vast design space that demonstrate high predicted performance, including novel designs with high uncertainty in performance that may hold unexpected promise. By applying machine learning tools to the simulation design, we map the trade-off between 1D yield and instability, specifically isolating parameter ranges, which maintain high performance while showing significantly improved Rayleigh–Taylor stability over the point design. Furthermore, the groundwork laid in this study will be a useful design tool for future NIF experiments with graded layer targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

A New 1D Model for Thermal Mixing and Stratification in Advanced Reactor Transients

Thermal mixing and stratification in large pools and enclosures play a critical role in the safety and performance of pool-type nuclear reactors, particularly during transient scenarios involving significant temperature differences between incoming and bulk coolant. Accurate modeling of these phenomena is essential for predicting system behavior and supporting passive safety features such as natural circulation. Here, this paper presents a new 1D model for thermal mixing and stratification, developed and implemented in the SAM code. The model represents a large pool as 1D coolant jet channels and zero-dimensional bulk pool volumes, enabling the simulation of a wide range of flow configurations, including hot and cold jet interactions, stratified layers, and the influence of complex geometries such as ceilings, free surfaces, and internal obstacles. Heat exchange between jet and pool regions is governed by closure relations calibrated against 3D computational fluid dynamics (CFD) simulations. The model improves upon earlier approaches by incorporating time-dependent jet characteristics and capturing the associated delay effects more accurately. Code-to-code comparisons and validation against experimental data from the Thermal Stratification Test Facility demonstrate the model’s accuracy and flexibility. This work offers two key contributions: (1) an efficient and robust method for simulating thermal mixing and stratification at the system level, eliminating the need for external coupling between system analysis codes and CFD, and (2) a significant enhancement of SAM’s capabilities to analyze thermal stratification phenomena in advanced reactor systems.

SAM↗

DOE OSTI2024

1D modeling of plasma streamers at ammonia-air flame conditions

Abstract Self-consistent 1D modeling of streamers in ammonia-oxygen-nitrogen-water mixtures has been performed in this work. A fluid model that includes species transport, electrostatic potential, and detailed chemistry was developed and verified. This model is then used to simulate the avalanche, streamer formation and propagation phases, driven by a nanosecond voltage pulse, at different thermochemical conditions derived from a 1D laminar premixed ammonia-air flame. The applicability of the Meek’s criterion in predicting the streamer inception location was successfully confirmed. Streamer formation and propagation duration were found to vary significantly with different thermochemical conditions, due to the difference in ionization rates. The thermochemical state also affected the breakdown characteristics which was tested by maintaining the background reduced electric field constant. Detailed kinetic analyses revealed the importance of O ( 1 D ) in the production of key radicals, such as O, OH, and NH 2 . Furthermore, the contributions of the dissociative electronic excitation of NH 3 towards the production of H and NH 2 radicals have also been reported. Spatial and temporal evolution of the electron energy loss fractions for various inelastic collision processes at different thermochemical states uncovered the input plasma energy spent of fuel dissociation and the large variability in the dominant processes during the avalanche and streamer propagation phases. The methodology and analyses reported in this work are key towards developing effective strategies for controlled nanosecond-pulsed non-equilibrium plasma sources used for ammonia ignition and flame stabilization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

1D model of SOL with self consistent calculation of non-coronalradiation and applications to shallow field line angles

A 1D model of the scrape off layer (SOL) is created with a physics based calculation of the impurity radiation and the inclusion of the perpendicular heat flux q ⊥ compared to previous 1D models. The calculation of the impurity radiation includes the addition of a model using parallel and perpendicular motion to calculate the impurity confinement time τ and the inclusion of charge exchange between neutral hydrogen and impurity ions. Reasonable agreement is found between the model and the 2D fluid code SOLPS-ITER. Additionally, an improvement is shown over the constant τ used in previous works The model is used to examine the effects of shallow field line angles at ITER levels of parallel heat flux (q || ). A large increase in radiation results in an increase in the upstream parallel heat flux which can still be in detachment at shallow field line angles for both q ⊥ and the calculated τ for traditional impurities (argon and nitrogen) as well as boron. The physics behind this increase in radiation at shallow field line angles is shown to be a decrease in τ and a change in the temperature profile with the inclusion of q ⊥ .

ITER↗

DOE OSTI2025

Band-Selective Spin-Charge Separation across the Charge Density Wave Transition in Quasi-1D NbSe 3

Non-Fermi liquid (non-FL) phase is a pivotal enigma in understanding intriguing quantum phases in strongly correlated systems, such as high-temperature superconductivity. Tomonaga-Luttinger liquid (TLL) theory, designed for one-dimensional (1D) systems, serves as one of the microscopic frameworks that elucidates non-FL behavior. Despite its theoretical concreteness, comprehensive experimental verification has remained incomplete. In particular, addressing the persistence of the TLL nature within ordered phases, such as charge density wave (CDW), has posed a significant challenge. We report the observation of TLL characteristics across the CDW transitions in a quasi-1D material NbSe 3 using angle-resolved photoemission spectroscopy. Spin-charge separation, a disentanglement of spin and charge degrees of freedom of electrons, is clearly observed within the band, accompanied by the suppression of spectral weight following a power-law behavior with anticipated temperature scaling. Surprisingly, the spin-charge separation persists even below the CDW transition temperatures, indicating the validity of the TLL nature in the CDW phase. In conclusion, our findings offer a unique opportunity to explore the interplay between the TLL and ordered phases, which could be connected to the interplay between non-FL and ordered phases in strongly correlated systems.

1-dimensional systems↗

DOE OSTI2026

Prognostic simulations of mixed-phase clouds with model AC-1D v1.0: the impact of aerosol types and freezing parameterizations on ice crystal budgets

Mixed-phase clouds at high latitudes contribute to the uncertainty in predicting cloud feedbacks and climate sensitivity, mainly due to the complexity of microphysical processes that influence the partitioning between the supercooled liquid and ice phases, and hence, cloud radiative effects on regional scales. Particularly in Arctic mixed-phase clouds, the activation of ice-nucleating particles (INPs) from various aerosol populations remains a leading source of uncertainty. We developed an aerosol-cloud one-dimensional (AC-1D) model, which provides a novel framework to prognostically treat INP and ice crystal budgets while explicitly accounting for polydisperse and multicomponent aerosol that activate INPs following different freezing parameterizations. The AC-1D model is informed by large-eddy simulations to probe the impact of INP representation on predicted ice crystal number concentrations (N i ) and ice crystal budgets in mixed-phase Arctic stratus. We apply three immersion freezing (IMF) parameterizations, two time-independent (singular) and one time-dependent (classical nucleation theory), to predict the evolution of the INP reservoir and resulting ice crystal budget from polydisperse mineral dust, organic (humic-like substances), and sea spray aerosol particle size distributions. Our analysis focuses on how variations in aerosol number concentration and cloud system parameters such as cloud cooling rate, cloud-top entrainment rate, and ice crystal fall speed influence the INP reservoir and ice crystal budgets. Furthermore, this study investigates the competitive ice nucleation dynamics in mixed aerosol environments and provides a process-level quantification of the INP budget terms, which directly controls ice crystal budgets. For all studied case scenarios, the aerosol types and associated particle size distributions significantly impact INP and N i , and the choice between a time-dependent and a singular freezing description yields orders-of-magnitude differences in the predicted INP and N i over the 10 h simulation time, reflecting typical cloud lifetimes. Our results show that the influence of cloud cooling, INP entrainment, and sedimentation varies significantly depending on the chosen freezing parameterization. These findings underscore the critical need for robust IMF parameterizations and precise cloud system observations to enhance the accuracy of models in predicting mixed-phase cloud structure and evolution.

Arctic clouds↗

DOE OSTI2026

Lyman-$α$ forest holography: 3D predictions from 1D measurements

Cosmological analyses of Lyman-$α$ forest clustering rely on either one-dimensional correlations along individual sightlines or three-dimensional correlations between different sightlines. Because these observables probe the matter distribution on very different scales, they have traditionally been analyzed independently. In this work, we bridge this gap using ForestFlow, an emulator trained on a suite of cosmological hydrodynamical simulations that provides a unified description of Lyman-$α$ forest clustering from linear to nonlinear scales. This framework enables us to determine the range of three-dimensional clustering models compatible with the DESI one-dimensional flux power spectrum ($P_{\rm 1D}$). The resulting predictions successfully reproduce the large-scale clustering measured by the DESI BAO analysis and provide physically motivated priors on nonlinear clustering that are used in a companion paper presenting the full-shape analysis of the DESI DR2 Lyman-$α$ forest. We validate our methodology using the large-volume, high-resolution hydrodynamical simulation ACCEL-2, demonstrating excellent agreement across the full range of scales considered. Finally, we combine constraints from the $P_{\rm 1D}$ and BAO analyses on the parameter combinations $b_δσ_8$ and $b_ηf σ_8$, finding that the two probes provide comparable constraining power while exhibiting complementary parameter degeneracies. Our results establish a direct connection between one- and three-dimensional Lyman-$α$ forest measurements through ForestFlow, an approach we term Lyman-$α$ holography by analogy with the reconstruction of higher-dimensional structure from lower-dimensional information.

Chaves-Montero, J. [Barcelona, IFAE] (ORCID:000000↗

DOE OSTI2024

Infrared Optical Anisotropy in Quasi‐1D Hexagonal Chalcogenide BaTiSe 3

Polarimetric infrared (IR) detection bolsters IR thermography by leveraging the polarization of light. Optical anisotropy, i.e., birefringence and dichroism, can be leveraged to achieve polarimetric detection. Recently, giant optical anisotropy is discovered in quasi-1D narrow-bandgap hexagonal perovskite sulfides, A 1+x TiS 3 , specifically BaTiS 3 and Sr 9/8 TiS 3 . In these materials, the critical role of atomic-scale structure modulations in the unconventional electrical, optical, and thermal properties raises the broader question of the nature of other materials that belong to this family. To address this issue, for the first time, high-quality single crystals of a largely unexplored member of the A 1+x TiX 3 (X = S, Se) family, BaTiSe 3 are synthesized. Single-crystal X-ray diffraction determined the room-temperature structure with the P31c space group, which is a superstructure of the earlier reported P6 3 /mmc structure. The crystal structure of BaTiSe 3 features antiparallel c-axis displacements similar to but of lower symmetry than BaTiS 3 , verified by the polarization dependent Raman spectroscopy. Fourier transform infrared (FTIR) spectroscopy is used to characterize the optical anisotropy of BaTiSe 3 , whose refractive index along the ordinary (E ⊥ c) and extraordinary (E ‖ c) optical axes is quantitatively determined by combining ellipsometry studies with FTIR. With a giant birefringence Δn ∼ 0.9, BaTiSe 3 emerges as a new candidate for miniaturized birefringent optics for mid-wave infrared to long-wave infrared imaging.

optical anisotropy↗

DOE OSTI2026

Design and simulation of n -type solar cells based on an iodine-doped CdTe absorber using SCAPS-1D

The performance of conventional p-type CdTe solar cells has plateaued in recent years, motivating exploration of n-type absorbers. Here, we evaluate a homojunction solar cell employing iodine-doped CdTe (CdTe:I) as the absorber in a Ti 3 C 2 T x MXene/p-CdTe:As/n-CdTe:I/indium structure through SCAPS-1D simulations and prototype devices. Optimized simulations predict efficiencies above 25% for thin CdTe:I absorbers (~0.7 μm). In contrast, the first prototype achieved only ~1.36% efficiency with V OC = 0.48 V, J SC = 6.45 mA/cm 2 and FF = 43.8%. When the simulation is adjusted to match the actual device structure, and the effective illumination is reduced to account for front-side light loss, the predicted V OC (0.48 V) and JSC (6.74 mA/cm 2 ) closely reproduce the experimental values. This suggests that the device performance is primarily limited by reduced front-side photon transmission and other material non-idealities. These results highlight the promise of iodine-doped n-type CdTe and identify clear pathways for further efficiency improvement.

14 SOLAR ENERGY↗

DOE OSTI2023

Ti‐Modified Imogolite Nanotubes as Promising Photocatalyst 1D Nanostructures for H 2 Production

Imogolite nanotubes (INTs) are predicted as a unique 1D material with spatial separation of conduction and valence band edges but their large band gaps have inhibited their use as photocatalysts. The first step toward using these NTs in photocatalysis and exploiting the polarization-promoted charge separation across their walls is to reduce their band gap. Here, the modification of double-walled aluminogermanate INTs by incorporation of titanium into the NT walls is explored. The precursor ratio x = [Ti]/([Ge]+[Ti]) is modulated between 0 and 1. Structural and optical properties are determined at different scales and the photocatalytic performance is evaluated for H 2 production. Although the incorporation of Ti atoms into the structure remains limited, the optimal condition is found around x = 0.4 for which the resulting NTs reveal a remarkable hydrogen production of ≈1500 µmol g −1 after 5 h for a noble metal-free photocatalyst, a 65-fold increase relative to a commercial TiO 2 -P25. This is correlated to a lowering of the recombination rate of photogenerated charge carriers for the most active structures. These results confirm the theoretical predictions regarding the potential of modified INTs as photoactive nanoreactors and pave the way for investigating and exploiting their polarization properties for energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Effective climate sensitivity distributions from a 1D model of global ocean and land temperature trends, 1970–2021

Abstract Current theoretically based Earth system models (ESMs) produce Effective Climate Sensitivities (EffCS) that range over a factor of three, with 80% of those models producing stronger global warming trends for 1970–2021 than do observations. To make a more observationally based estimate of EffCS, a 1D time-dependent forcing-feedback model of temperature departures from energy equilibrium is used to match measured ranges of global-average surface and sub-surface land and ocean temperature trends during 1970–2021. In response to two different radiative forcing scenarios, a full range of three model free parameters are evaluated to produce fits to a range of observed surface temperature trends (± 2σ) from four different land datasets and three ocean datasets, as well as deep-ocean temperature trends and borehole-based trend retrievals over land. Land-derived EffCS are larger than over the ocean, and EffCS is lower using the newer Shared Socioeconomic Pathways (SSP245, 1.86 °C global EffCS, ± 34% range 1.48–2.15 °C) than the older Representative Concentration Pathway forcing (RCP6, 2.49 °C global average EffCS, ± 34% range 2.04–2.87 °C). The strongest dependence of the EffCS results is on the assumed radiative forcing dataset, underscoring the role of radiative forcing uncertainty in determining the sensitivity of the climate system to increasing greenhouse gas concentrations from observations alone. The results are consistent with previous observation-based studies that concluded EffCS during the observational period is on the low end of the range produced by current ESMs.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

On the validity and limitations of 1D model for heat and mass transfer performance evaluation in a multilayer binder-free desiccant dehumidifier: isothermal dehumidification with internal cooling

Efficient humidity control is essential for maintaining indoor thermal comfort, yet conventional vapor-compression-based dehumidifiers are energy-intensive. Employing separate sensible and latent cooling through desiccant-coated heat exchangers (DCHEs) combined with evaporative coolers offers energy savings of up to 80 % compared to conventional systems. However, the dehumidification performance of DCHEs remains limited due to the use of polymer binders for coating desiccant materials onto heat exchange surfaces. In our previous study, we developed a multilayer fixed-bed binder-free desiccant dehumidifier (MFBDD) that demonstrated high dehumidification capacity and low pressure drop compared to rotary desiccant wheels. Nevertheless, its potential for further enhancement through internal cooling and the use of step-shaped adsorption isotherms has not been explored. In this study, a physics-based one-dimensional (1D) transient model is developed and validated to capture the coupled heat and mass transfer processes in the MFBDD and extended to simulate internal cooling using a high-capacity composite metal–organic framework, MIL-101/GO-6 (water uptake ≈1.6 g/g within 35–47 % RH). The model enables detailed analysis of local air and bed temperature dynamics and quantifies how internal cooling affects the dehumidification performance under a wide range of operating conditions. Results show that integrating internal cooling and using MIL-101/GO-6 enhance mass adsorbed, moisture removal capacity, and dehumidification effectiveness by 50 %–99 % compared with the M.S. Gel baseline. The study further reveals that achieving near-isothermal operation requires simultaneous enhancement of the convective heat transfer coefficient and heat exchange surface area. In conclusion, this work provides the first detailed physical insight into the interplay between internal cooling and step-shaped isotherms in a binder-free desiccant device and establishes a validated modeling framework for scaling up and system-level performance evaluation of next-generation energy-efficient dehumidification systems.

Heat and mass transfer↗

DOE OSTI2022

RF-transpond: A 1D coupled cold plasma wave and plasma transport model for ponderomotive force driven density modification parallel to B

The RF-Transpond code couples a fluid plasma transport solver with a frequency domain cold plasma RF wave solver in a 1D domain parallel to a strong background magnetic field. A ponderomotive force term proportional to parallel gradients in the electric field strength is included in the transport model in order to describe ponderomotive effects in the scrape-off layer (SOL) of fusion plasmas. The transport and wave codes are verified independently and a coupled case corresponding to experimental parameters from the LArge Plasma Device (LAPD) is presented. The density perturbation ratio R n , calculated to describe ponderomotive force driven modifications, is up to 20% for the simulation inputs used.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Battery anode design: From 1D nanostructure to 3D nanoarchitecture – Enabling next-generation energy storage technology

Recently, many studies have reported the efficacy of 1D silicon nanostructures as anode materials (mostly nanowires) due to their large surface to volume ratio which could be an advantage in terms of charging kinetics. Anode design is a crucial factor for the further development of lithium-ion battery (LIB) technology, especially in terms of achieving the high charging rate performance, as typically needed in electric vehicles (EV). 3D nanostructures have been identified as the key to dramatically enhanced charging rate of LIB, in addition to the change of materials (from carbon-based anode to silicon-based). However, existing fabrication methodologies for 3D nanostructures are inherently expensive – using advanced lithography techniques or other nanopatterning methodologies, as well as using additive manufacturing approaches. Electrospinning (as an integrated additive manufacturing methodology) may be used to produce low-cost 3D-printed fiber structures. Here, in the present study, we demonstrate the groundwork in this field of research in the past 3–4 years, which would allow the extension of this special additive manufacturing approach to reach nanoscale 3D-printed fiber structures more economically and with scalability for manufacturing. This would pave the way to achieve the order of magnitude increase in battery charging rate as needed to realize the vision of the electrification of mobility/transportation.

25 ENERGY STORAGE↗