Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “variance estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Assimilation of TOPEX Sea Level Measurements with a Reduced-Gravity, Shallow Water Model of the Tropical Pacific Ocean

Sea surface height variability measured by TOPEX is analyzed in the tropical Pacific Ocean by way of assimilation into a wind-driven, reduced-gravity, shallow water model using an approximate Kalman filter and smoother. The analysis results in an optimal fit of the dynamic model to the observations, providing it dynamically consistent interpolation of sea level and estimation of the circulation. Nearly 80% of the expected signal variance is accounted for by the model within 20 deg of the equator, and estimation uncertainty is substantially reduced by the voluminous observation. Notable features resolved by the analysis include seasonal changes associated with the North Equatorial Countercurrent and equatorial Kelvin and Rossby waves. Significant discrepancies are also found between the estimate and TOPEX measurements, especially near the eastern boundary. Improvements in the estimate made by the assimilation are validated by comparisons with independent tide gauge and current meter observations. The employed filter and smoother are based on approximately computed estimation error covariance matrices, utilizing a spatial transformation and an symptotic approximation. The analysis demonstrates the practical utility of a quasi-optimal filter and smoother.

Fukumori, Ichiro↗
NASA NTRS2016

Modeling SMAP Spacecraft Attitude Control Estimation Error Using Signal Generation Model

Two ground simulation software are used to model the SMAP spacecraft dynamics. The CAST software uses a higher fidelity model than the ADAMS software. The ADAMS software models the spacecraft plant, controller and actuator models, and assumes a perfect sensor and estimator model. In this simulation study, the spacecraft dynamics results from the ADAMS software are used as CAST software is unavailable. The main source of spacecraft dynamics error in the higher fidelity CAST software is due to the estimation error. A signal generation model is developed to capture the effect of this estimation error in the overall spacecraft dynamics. Then, this signal generation model is included in the ADAMS software spacecraft dynamics estimate such that the results are similar to CAST. This signal generation model has similar characteristics mean, variance and power spectral density as the true CAST estimation error. In this way, ADAMS software can still be used while capturing the higher fidelity spacecraft dynamics modeling from CAST software.

Soil Moisture Active Passive↗
DOE OSTI2015

Online technique for detecting state of onboard fiber optic gyroscope

Although angle random walk (ARW) of fiber optic gyroscope (FOG) has been well modeled and identified before being integrated into the high-accuracy attitude control system of satellite, aging and unexpected failures can affect the performance of FOG after launch, resulting in the variation of ARW coefficient. Therefore, the ARW coefficient can be regarded as an indicator of “state of health” for FOG diagnosis in some sense. The Allan variance method can be used to estimate ARW coefficient of FOG, however, it requires a large amount of data to be stored. Moreover, the procedure of drawing slope lines for estimation is painful. To overcome the barriers, a weighted state-space model that directly models the ARW to obtain a nonlinear state-space model was established for FOG. Then, a neural extended-Kalman filter algorithm was implemented to estimate and track the variation of ARW in real time. The results of experiment show that the proposed approach is valid to detect the state of FOG. Moreover, the proposed technique effectively avoids the storage of data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

A stochastic approach to quantifying the blur with uncertainty estimation for high-energy X-ray imaging systems

One of the primary causes of blur in a high-energy X-ray imaging system is the shape and extent of the radiation source, or ‘spot’. It is important to be able to quantify the size of the spot as it provides a lower bound on the recoverable resolution for a radiograph, and penumbral imaging methods – which involve the analysis of blur caused by a structured aperture – can be used to obtain the spot’s spatial profile. We present a Bayesian approach for estimating the spot shape that, unlike variational methods, is robust to the initial choice of parameters. The posterior is obtained from a normal likelihood, which was constructed from a weighted least squares approximation to a Poisson noise model, and prior assumptions that enforce both smoothness and non-negativity constraints. A Markov chain Monte Carlo algorithm is used to obtain samples from the target posterior, and the reconstruction and uncertainty estimates are the computed mean and variance of the samples, respectively. Lastly, synthetic data-sets are used to demonstrate accurate reconstruction, while real data taken with high-energy X-ray imaging systems are used to demonstrate applicability and feasibility.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2014

Likelihood-informed dimension reduction for nonlinear inverse problems

The intrinsic dimensionality of an inverse problem is affected by prior information, the accuracy and number of observations, and the smoothing properties of the forward operator. From a Bayesian perspective, changes from the prior to the posterior may, in many problems, be confined to a relatively low-dimensional subspace of the parameter space. We present a dimension reduction approach that defines and identifies such a subspace, called the 'likelihood-informed subspace' (LIS), by characterizing the relative influences of the prior and the likelihood over the support of the posterior distribution. This identification enables new and more efficient computational methods for Bayesian inference with nonlinear forward models and Gaussian priors. In particular, we approximate the posterior distribution as the product of a lower-dimensional posterior defined on the LIS and the prior distribution marginalized onto the complementary subspace. Markov chain Monte Carlo sampling can then proceed in lower dimensions, with significant gains in computational efficiency. We also introduce a Rao–Blackwellization strategy that de-randomizes Monte Carlo estimates of posterior expectations for additional variance reduction. We demonstrate the efficiency of our methods using two numerical examples: inference of permeability in a groundwater system governed by an elliptic PDE, and an atmospheric remote sensing problem based on Global Ozone Monitoring System (GOMOS) observations.

42 ENGINEERING↗
DOE OSTI2023

Graph Sparsification by Approximate matrix Multiplication

Graphs arising in statistical problems, signal processing, large networks, combinatorial optimization, and data analysis are often dense, which causes both computational and storage bottlenecks. One way of sparsifying a weighted graph, while sharing the same vertices as the original graph but reducing the number of edges, is through spectral sparsification. We study this problem through the perspective of RandNLA. Specifically, we utilize randomized matrix multiplication to give a clean and simple analysis of how sampling according to edge weights gives a spectral approximation to graph Laplacians, without requiring spectral information. Through the CR–MM algorithm, we attain a simple and computationally efficient sparsifier whose resulting Laplacian estimate is unbiased and of minimum variance. Here, we define a new notion of additive spectral sparsifiers, which has not been considered in the literature.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1972

A Bayesian approach to parameter and reliability estimation in the Poisson distribution.

For life testing procedures, a Bayesian analysis is developed with respect to a random intensity parameter in the Poisson distribution. Bayes estimators are derived for the Poisson parameter and the reliability function based on uniform and gamma prior distributions of that parameter. A Monte Carlo procedure is implemented to make possible an empirical mean-squared error comparison between Bayes and existing minimum variance unbiased, as well as maximum likelihood, estimators. As expected, the Bayes estimators have mean-squared errors that are appreciably smaller than those of the other two.

Canavos, G. C.↗
NASA NTRS1978

Rain-rate estimates for an attenuating radar

An iterative method has been used to produce rain-rate estimates for an attenuating frequency radar. An infinite number of higher-order estimates are shown to converge in the limit to the Hitschfeld-Bordan solution under certain conditions. An error analysis was performed by a model accounting for the randomness of the radar return power, the k-Z, Z-R relations, and offsets in the radar calibration constant. Since the behavior of the estimates strongly depends on system errors, the choice of the best estimate requires a knowledge of the variance and range of offsets in meteorological data and the calibration constant. As the errors increase, the use of the lower orders avoids significant overpredictions. In order to obtain reliable rain-rate predictions in the presence of realistic errors, an antenna pointing angles away from the horizontal at frequencies in the lower end of the X-band may be used. Such antenna configurations insure low attenuation.

Meneghini, R.↗
NASA NTRS1990

Modeling bidirectional reflectance of forests and woodlands using Boolean models and geometric optics

Geometric-optical discrete-element mathematical models for forest canopies have been developed using the Boolean logic and models of Serra. The geometric-optical approach is considered to be particularly well suited to describing the bidirectional reflectance of forest woodland canopies, where the concentration of leaf material within crowns and the resulting between-tree gaps make plane-parallel, radiative-transfer models inappropriate. The approach leads to invertible formulations, in which the spatial and directional variance provides the means for remote estimation of tree crown size, shape, and total cover from remotedly sensed imagery.

Strahler, Alan H.↗
NASA NTRS2019

Predicting Cancer Risk from Ionizing Radiation

The ability to predict cancer risk associated with exposure to low doses of high-LET ionizing radiation (IR) remains a challenge. Epidemiological methods lack the sensitivity and power to provide detailed risk estimates for cancer and ignore individual variance in IR sensitivity. We have hypothesized that DNA repair capacity can be used as a marker to evaluate and differentiate individual radiation sensitivity. More specifically, this work is based on the concept that the combined time-dose dependence of radiation-induced foci (RIF) of p53-binding protein 1 (53BP1) following low-LET exposure contains sufficient information to infer sensitivity to any other LET. Our hypothesis was tested in 15 different mouse strains as well as in primary human immune cells. We first approached individual ionizing radiation sensitivity in a mouse model by culturing primary skin fibroblasts extracted from 76 mice of 15 different genetic backgrounds and exposing them to HZE particles and X-rays. This work is one of the most extensive studies on the kinetics and possible genetic underpinnings of radiation-induced DNA damage and repair. Our results is in agreement with a DNA repair model we previously postulated, where nearby DNA double strand breaks (DSB) in the nucleus are brought together for more efficient repair, leading to RIF clustering. Such mechanism was evidenced by a specific dose and LET dependence of RIF numbers. Briefly, RIF quantification after low-LET X-ray exposure showed an asymptotic saturation for doses between 1 Gy and 4 Gy 4 hours post-irradiation across all 15 strains. The clustering of DSB across all strains also led to more RIF/Gy for lower LET (X-ray and 350 MeV/n Ar) than for higher LET (600 MeV/n Fe) 4 hours post-exposure. Considering the fact that the number of DSB/Gy should be independent of LET, our data suggest there are more DSB in individual RIF as the LET increases. RIF numbers for 24 and 48 hours post-exposure led to the inverse trend, with more remaining RIF/Gy for higher LET (by 600 MeV/n Fe). This result suggests cells have more difficulty resolving RIF from higher LET as they the number DSB/RIF increases. Note that for most conditions, the variance of RIF/Gy was small within individual animals of the same strain and large between strains, suggesting a strong genetics component. Furthermore, we present our preliminary data from an ongoing study on human genetic associations with IR sensitivity. To address the human variability in responses to HZE particle irradiation in a maximally comprehensive manner, we are in the process of collecting and isolating primary blood mononuclear cells from 768 healthy subjects of European descent, 18-75 years of age, 50/50 male/female distribution. We have analyzed 53BP1+ RIF formation as well as oxidative stress and cell death in primary cells from 192 subjects in response to the same HZE particles as used in mice: 600 MeV/n Fe, 350 MeV/n Ar and 350 MeV/n Si, 1.1 and 3 particles/100m2, 4 and 24 hours after irradiation. We will next complete the quantification of HZE particle-induced DNA and cellular damage in the remaining subjects and compare it to their responses to low-LET irradiation. Finally, we will perform GWAS analysis to identify human genomic associations with IR sensitivity and potential targets for biomarker development.

High-LET radiation↗
DOE OSTI2017

An assessment of total depletion uncertainties for a GBC-32 dry storage cask with PLUS7 fuels using Monte Carlo sampling and two-way ANOVA F-test

It is important to accurately evaluate depletion uncertainties that exist due to the limitations of a computer code on accuracy in a nuclear depletion calculation for criticality safety analysis. In this work, the bias and bias uncertainty in the effective neutron multiplication factor (k{sub eff}) for the generic 32 PWR-assembly burnup credit (GBC-32) cask system were assessed using the Monte Carlo uncertainty sampling method for three different burnups and the isotopic biases and uncertainties obtained with the calculated and measured isotopic concentrations. The PLUS7 used nuclear fuel assemblies discharged from the Hanbit Nuclear Power Plant Unit 3 were assumed to be loaded into the GBC-32 cask. In addition, the statistical F-test in the two-way analysis of variance (ANOVA) was suggested to efficiently estimate the statistically converged total depletion uncertainty in k{sub eff}, with a significant reduction of computing efforts in the Monte Carlo criticality calculations, and it was applied to the GBC-32 cask system after a sensitivity analysis was performed to select the important nuclides having significant contributions to the total depletion uncertainty. With the statistical F-tests in the two-way ANOVA, 100 criticality calculations were needed to get a statistically converged total depletion uncertainty for 10 and 30 GWD/MTU, while 120 criticality calculations were needed for 50 GWD/MTU. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2013

Is the assumption of normality or log-normality for continuous response data critical for benchmark dose estimation?

Continuous responses (e.g. body weight) are widely used in risk assessment for determining the benchmark dose (BMD) which is used to derive a U.S. EPA reference dose. One critical question that is not often addressed in dose–response assessments is whether to model the continuous data as normally or log-normally distributed. Additionally, if lognormality is assumed, and only summarized response data (i.e., mean ± standard deviation) are available as is usual in the peer-reviewed literature, the BMD can only be approximated. In this study, using the “hybrid” method and relative deviation approach, we first evaluate six representative continuous dose–response datasets reporting individual animal responses to investigate the impact on BMD/BMDL estimates of (1) the distribution assumption and (2) the use of summarized versus individual animal data when a log-normal distribution is assumed. We also conduct simulation studies evaluating model fits to various known distributions to investigate whether the distribution assumption has influence on BMD/BMDL estimates. Our results indicate that BMDs estimated using the hybrid method are more sensitive to the distribution assumption than counterpart BMDs estimated using the relative deviation approach. The choice of distribution assumption has limited impact on the BMD/BMDL estimates when the within dose-group variance is small, while the lognormality assumption is a better choice for relative deviation method when data are more skewed because of its appropriateness in describing the relationship between mean and standard deviation. Additionally, the results suggest that the use of summarized data versus individual response data to characterize log-normal distributions has minimal impact on BMD estimates. - Highlights: • We investigate to what extent the distribution assumption can affect BMD estimates. • Both real data analysis and simulation study are conducted. • BMDs estimated using hybrid method are more sensitive to distribution assumption. • Summarized continuous data are adequate for BMD estimation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2014

OPACITY BROADENING OF {sup 13}CO LINEWIDTHS AND ITS EFFECT ON THE VARIANCE-SONIC MACH NUMBER RELATION

We study how the estimation of the sonic Mach number (M{sub s} ) from {sup 13}CO linewidths relates to the actual three-dimensional sonic Mach number. For this purpose we analyze MHD simulations that include post-processing to take radiative transfer effects into account. As expected, we find very good agreement between the linewidth estimated sonic Mach number and the actual sonic Mach number of the simulations for optically thin tracers. However, we find that opacity broadening causes M{sub s} to be overestimated by a factor of ≈1.16-1.3 when calculated from optically thick {sup 13}CO lines. We also find that there is a dependence on the magnetic field: super-Alfvénic turbulence shows increased line broadening compared with sub-Alfvénic turbulence for all values of optical depth for supersonic turbulence. Our results have implications for the observationally derived sonic Mach number-density standard deviation (σ{sub ρ/(ρ)}) relationship, σ{sub ρ/〈ρ〉}{sup 2}=b{sup 2}M{sub s}{sup 2}, and the related column density standard deviation (σ {sub N/(N)}) sonic Mach number relationship. In particular, we find that the parameter b, as an indicator of solenoidal versus compressive driving, will be underestimated as a result of opacity broadening. We compare the σ {sub N/(N)}-M{sub s} relation derived from synthetic dust extinction maps and {sup 13}CO linewidths with recent observational studies and find that solenoidally driven MHD turbulence simulations have values of σ {sub N/(N)}which are lower than real molecular clouds. This may be due to the influence of self-gravity which should be included in simulations of molecular cloud dynamics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Uncertainty analysis for infrasound waveform inversion: Application to explosion yield estimation

While the acoustic waveform inversion method is increasingly used in geophysical acoustics to constrain source parameters, the inversion results are often provided without any uncertainty analysis. Here, this study presents a probabilistic representation for acoustic waveform inversion and method to evaluate the inversion uncertainty using ground-truth data. A posteriori probability distribution of source estimate is described by a priori waveform misfit covariance and the variance of acoustic source model. The probabilistic framework is applied to local explosion infrasound to estimate the yields of explosions and uncertainty. Estimated yields showed overall good agreement with the true yields (less than 25% errors). The uncertainty of the estimated yield is represented by the sum of the waveform inversion uncertainty and source model uncertainty. It is shown that the yield uncertainty attributed to local infrasound inversion (within 10 km) is as small as the uncertainty caused by 10% prediction errors in the acoustic source model. Finally, these results indicate that the acoustic source model uncertainty should also be considered for accurate yield estimation and that local infrasound can be a valuable tool to understand the magnitude of the source uncertainty.

58 GEOSCIENCES↗
DOE OSTI2022

Anomalies of cosmic anisotropy from holographic universality of great-circle variance

We examine all-sky cosmic microwave background temperature maps on large angular scales to compare their consistency with two scenarios: the standard inflationary quantum picture, and a distribution constrained to have a universal variance of primordial curvature perturbations on great circles. The latter symmetry is not a property of standard quantum inflation, but may be a symmetry of holographic models with causal quantum coherence on null surfaces. Since the variation of great-circle variance is dominated by the largest angular scale modes, in the latter case the amplitude and direction of the unobserved intrinsic dipole (that is, the ℓ = 1 harmonics) can be estimated from measured ℓ = 2, 3 harmonics by minimizing the variance of great-circle variances including only ℓ = 1, 2, 3 modes. It is found that including the estimated intrinsic dipole leads to a nearly-null angular correlation function over a wide range of angles, in agreement with a null anti-hemispherical symmetry independently motivated by holographic causal arguments, but highly anomalous in standard cosmology. Simulations are used here to show that simultaneously imposing the constraints of universal great-circle variance and the vanishing of the angular correlation function over a wide range of angles tends to require patterns that are unusual in the standard picture, such as anomalously high sectorality of the ℓ = 3 components, and a close alignment of principal axes of ℓ = 2 and ℓ = 3 components, that have been previously noted on the actual sky. The precision of these results appears to be primarily limited by errors introduced by models of Galactic foregrounds.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1974

Model optimization using statistical estimation

Program revises initial or prior estimate of stiffness and mass parameters to parameters yielding frequency and mode characteristics in agreement with test data. Variances are also calculated and consequently define uncertainties of final estimates.

Collins, J. D.↗
NASA NTRS1991

Terrestrial water storage and polar motion

This study compares observed polar motion for the period 1900-1985 with meteorologic and hydrologic data for the world over the same period, in an effort to determine whether water storage, in combination with air mass redistribution, can account for the observed variance of polar motion. Monthly time series of estimated continental water storage and air mass excitation functions have been compared at the annual frequency and at the Chandler frequency using power, coherence, multiple coherence, and phase spectra. There is a discrepancy in accounting for more than half the variance of polar motion across a broad range of frequencies. Similar results have been obtained in recent studies of polar motion at frequencies above 1 cycle per year using modem space geodetic determinations of polar motion. The persistence of the discrepancey at the annual frequency and its broadband nature suggest a source of polar motion excitation due to air and water motion which has either not been correctly estimated or not yet identified.

Kuehne, John↗