Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “topography”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Ring furrows - Inversion of topography in Martian highland terrains

Viking Orbiter images showing ring furrows (as defined by De Hon, 1984) and related structures on the Martian highlands are presented and analyzed. It is pointed out that ring furrows occur only on modified or dissected plains and plains within hilly or cratered terrain, that all ring furrows are breached in some way, and that they appear to arise at the same time as nearby valley systems (although they do not contain small valleys themselves). A number of features with some similarities to ring furrows are discussed, and it is suggested that the furrows arise as a result of a sequence of processes including crater formation on a plains surface, partial burial by plains-forming materials, and preferential water/ice erosion of the exposed rim. The presence of significant ground-water/ice storage systems near ring furrows is inferred.

De Hon, Rene A.↗
NASA NTRS1989

Effects of lateral viscosity variations on long-wavelength geoid anomalies and topography

The effects of lateral variations in the earth mantle viscosity, due to temperature- or stress-dependent rheology, on the long-wavelength geoid anomalies are examined. Results from simple perturbation theory combined with findings from numerical models for convective flow led to a conclusion that the geoid due to the very longest wavelength convective patterns (l = 2,3) on earth is probably not seriously contaminated by lateral variations due either to temperature or stress dependence. Considerable contamination of the higher-degree geoid (l value of no less than 4) is to be expected due to lateral viscosity variations in phase with the fundamental convection scale length.

Richards, Mark A.↗
NASA NTRS1989

Surface topography of the Greenland Ice Sheet from satellite radar altimetry

Surface elevation maps of the southern half of the Greenland subcontinent are produced from radar altimeter data acquired by the Seasat satellite. A summary of the processing procedure and examples of return waveform data are given. The elevation data are used to generate a regular grid which is then computer contoured to provide an elevation contour map. Ancillary maps show the statistical quality of the elevation data and various characteristics of the surface. The elevation map is used to define ice flow directions and delineate the major drainage basins. Regular maps of the Jakobshavns Glacier drainage basin and the ice divide in the vicinity of Crete Station are presented. Altimeter derived elevations are compared with elevations measured both by satellite geoceivers and optical surveying.

Bindschadler, Robert A.↗
NASA NTRS1989

Dynamical diffraction imaging (topography) with X-ray synchrotron radiation

By contrast to electron microscopy, which yields information on the location of features in small regions of materials, X-ray diffraction imaging can portray minute deviations from perfect crystalline order over larger areas. Synchrotron radiation-based X-ray optics technology uses a highly parallel incident beam to eliminate ambiguities in the interpretation of image details; scattering phenomena previously unobserved are now readily detected. Synchrotron diffraction imaging renders high-resolution, real-time, in situ observations of materials under pertinent environmental conditions possible.

Kuriyama, M.↗
NASA NTRS1990

High-resolution topography and albedo of the South Polar layered deposits on Mars

Using a new photoclinometric technique with high-resolution Mariner 9 images, maximum slopes of 10 - 20 deg are found to occur on an exposure of layered deposits within the south polar residual cap of Mars. Stereophotogrammetry is used to constrain the photoclinometric solutions, which resolve layer thicknesses of 100-300 m. Albedo variations are correlated with slope, indicating that frost is present on level areas. There is evidence for temporal changes in frost distribution in the seven days between the to images used in this study. The magnitude of the slopes derived here and consideration of the stability of water ice at the surface of the layered deposits strongly suggest the presence of a competent weathering rind. The weathered surface may be composed of dark filamentary sublimation residue particles that protect the underlying ice from solar heating. This hypothesis is consistent with previous studies of the regional color and albedo of the layered deposits, which indicate that the deposits are slightly darker and less red than the bright dust that mantles much of the south polar region. Furthermore, the proposed weathering mechanism provides a plausible source of dark, saltating material for the Martian polar dune fields.

Herkenhoff, Ken E.↗
NASA NTRS1991

High-resolution measurements of surface topography with airborne laser altimetry and the global positioning system

Recently, an airborne lidar system that measures laser pulse time-of-flight and the distortion of the pulse waveform upon reflection from earth surface terrain features was developed and is now operational. This instrument is combined with Global Positioning System (GPS) receivers and a two-axis gyroscope for accurate recovery of aircraft position and pointing attitude. The laser altimeter system is mounted on a high-altitude aircraft platform and operated in a repetitively-pulsed mode for measurements of surface elevation profiles at nadir. The laser transmitter makes use of recently developed short-pulse diode-pumped solid-state laser technology in Q-switched Nd:YAG operating at its fundamental wavelength of 1064 nm. A reflector telescope and silicon avalanche photodiode are the basis of the optical receiver. A high-speed time-interval unit and a separate high-bandwidth waveform digitizer under microcomputer control are used to process the backscattered pulses for measurements of terrain. Other aspects of the lidar system are briefly discussed.

Garvin, James B.↗
NASA NTRS1991

Airborne lidar for profiling of surface topography

A lidar system is described that measures laser pulse time-of-flight and the distortion of the pulse waveform for reflection from earth surface terrain features. This instrument system is mounted on a high-altitude aircraft platform and operated in a repetitively pulsed mode for measurements of surface elevation profiles. The laser transmitter makes use of recently developed short-pulse diode-pumped solid-state laser technology. Aircraft position in three dimensions is measured to submeter accuracy by use of differential Global Positioning System receivers. Instrument construction and performance are detailed.

Bufton, Jack L.↗
NASA NTRS1991

Topex/Poseidon - The ocean topography experiment

The technology and objectives of the satellite are delineated with emphasis given to the implications of sea-level measurements and the importance of large-scale oceanic circulation. The satellite altimeter system is described which comprises radar altimetry and orbit determination, and the utility of the system is discussed relative to the GEOS-3 and Seasat. A radiometer measures the sea-surface microwave-brightness temperature at three frequencies, and the laser-reflector array provides orbit determination. The three-year primary mission is expected to collect sea-level data to a precision of a few cm and interpret the in situ data to present a 4D global description of oceanic circulation. The data can be used to assess wind-forcing, heat-transport, and wave-interaction algorithms, as well as to assess large-scale meteorological parameters.

Fu, Lee-Lueng↗
NASA NTRS1992

Topography of Apollinaris Patera and Ma'adim Vallis

Digital elevation models of the northern part of Ma'adim Vallis (603a41 607m/pix, 639a91 721m/pix), and Apollinaris Patera (603a42 612m/pix, 639a92 717m/pix), covering the area between 180 degrees to 190 degrees long and -2 degrees to -20 degrees lat. were obtained using a method described here. The results for the Ma'adim Vallis area show broad agreement with the United States Geological Survey (USGS) topographic map of the area with a channel depth of 1 to 2 km. A detailed study of the variations in the channel depth along its course and calculations of its discharge rate from channel cross section and slope are currently being undertaken. Results for Apollinaris Patera have been obtained, although the absolute heights relative to the Mars datum are not well constrained. However, the relative heights are sufficient for some analysis. Again, the topographic map is in reasonable agreement with the USGS map of the area, although there are significant differences.

Thornhill, G. D.↗
NASA NTRS1991

Stress analysis of Tellus Regio, Venus, based on gravity and topography - Comparison with Venera 15/16 radar images

The tectonics of the Tellus Region highland on Venus is examined using the altimetry and gravity data collected by Pioneer Venus, which were incorporated into a thin elastic shell model to calculate both the global (long-wavelength) and the regional (short-wavelength) stresses for various assumed values of crust, lithosphere, and mantle thickness and modes of compensation. The resultant stress fields were compared to the surface morphology observed in the Venera 15/16 radar images and interpreted in terms of stress history of Tellus Regio. The best fitting parameters were found to be consistent with minor amounts of lithospheric flexure being necessary to produce the observed surface features of this region.

Williams, David R.↗
NASA NTRS1992

The effect of magnetic topography on high-latitude radio emission at Neptune

Occultation by a local elevation on the surface of constant magnetic field is proposed as a new interpretation for the unusual properties of Neptune high-latitude emission. Abrupt changes in intensity and polarization of this broadband smooth radio emission were observed as the Voyager 2 spacecraft passed near the north magnetic pole before closest approach. The observed sequence of cutoffs with polarization reversal would not occur during descent of the spacecraft through regular surfaces of increasing magnetic field. The sequence can be understood in terms of constant-frequency (constant-field) surfaces that are not only offset from the planet center but are locally highly distorted by an elevation that occults the outgoing extraordinary-mode beam. The required occulter is similar to the field enhancement observed directly by the magnetometer team when Voyager reached lower altitude farther to the west. Evidence is presented that the sources of the high-altitude emission are located near the longitude of the minimum-B anomaly associated with the dipole offset and that the local elevation of constant-B surfaces extends eastward from the longitude where it is directly measured by the magnetometer to the longitude where occultation of the remote radio source is observed. Together, the radio and magnetometer experiments indicate that the constant-frequency surfaces are distorted by an elevation that extends 0.3 rad in the longitudinal direction.

Sawyer, C. B.↗
NASA NTRS1991

TOPEX/Poseidon - The ocean topography experiment

The configuration of the TOPEX/Poseidon mission is discussed in an overview of the launch and experimental objectives related to the deployment planned for 1992. The spacecraft carries equipment for radar altimetry and precise orbit determination, and the instruments are expected to provide precise observations of global ocean dynamics. Six scientific instruments are described including the Laser Retroreflector Array, the Tracking System Receiver, and GPS Demonstration Receiver. Also described are the orbit configuration of the satellite, verification of system performance, and the techniques for data processing. The observations from the TOPEX/Poseidon experiment can provide data that is free of sea-level variabilities and describes the general circulation of the ocean and its variability.

Fu, Lee-Lueng↗
NASA NTRS1992

Finite amplitude gravity waves in the Venus atmosphere generated by surface topography

A two-dimensional, fully nonlinear, nonhydrostatic, gravity wave model is used to study the evolution of gravity waves generated near the surface of Venus. The model extends from near the surface to well above the cloud layers. Waves are forced by applying a vertical wind at the bottom boundary. The boundary vertical wind is determined by the product of the horizontal wind and the gradient of the surface height. When wave amplitudes are small, the near-surface horizontal wind is the zonally averaged basic-state zonal wind, and the length scales of the forcing that results are characteristic of the surface height variation. When the forcing becomes larger and wave amplitudes affect the near-surface horizontal wind field, the forcing spectrum becomes more complicated, and a spectrum of waves is generated that is not a direct reflection of the spectrum of the surface height variation. Model spatial resolution required depends on the amplitude of forcing; for very nonlinear cases considered, vertical resolution was 250 m, and horizontal resolution was slightly greater than 1 km. For smaller forcing amplitudes, spatial resolution was much coarser, being 1 km in the vertical and about 10 km in the horizontal. Background static stability and mean wind are typical of those observed in the Venus atmosphere.

Young, R. E.↗
NASA NTRS1991

Studies of tropical ocean dynamics using the TOPEX/Poseidon altimeter-derived sea surface topography

Our primary objective is to carry out studies of tropical ocean dynamics using the TOPEX/POSEIDON altimeter-derived sea level data set in conjunction with the large in situ sea level data set available at the Tropical Ocean Global Atmosphere (TOGA) Sea Level Center. These studies will be supported by an interaction with numerical model simulations of tropical ocean variability. Five specific objectives can be identified: (1) research products; (2) short-term climate variations; (3) tropical-current variations; (4) synoptic-scale variability; and (5) model simulations.

Lukas, Roger↗
NASA NTRS1991

Ocean topography mapping, improvement of the marine geoid, and global permanent ocean circulation studies from TOPEX/Poseidon altimeter data

The TOPEX/POSEIDON altimeter measurements will be the first global observations of the sea surface with accuracy sufficient to make quantitative determinations of the ocean's general circulation and its variations. These measurements are an important step to understanding global change in the ocean and its impact on the climate. Our investigation will focus on the examination of features in the sea surface elevation at the largest spatial and temporal scales. TOPEX/POSEIDON altimeter measurements will be used in conjunction with observations from past satellite-altimeter missions, such as NASA's GEOS-3 and Seasat, the U.S. Navy's Geosat and SALT, and the European Remote Sensing satellite in order to address the following issues: (1) Improve models of the marine geoid, especially at wavelengths needed to understand the basin-scale ocean dynamic topograpy. (2) Measure directly from the altimeter data the expression of the mean global ocean circulation in the sea surface at the largest scales through a simultaneous solution for gravity, orbital, and oceanographic parameters. (3) Examine the sea surface measurements for changes in global ocean mass or volume, interannual variations in the basin-scale ocean circulation, and annual changes in the heating and cooling of the upper ocean.

Marsh, James G.↗
NASA NTRS1992

Topography from shading and stereo

Methods exploiting photometric information in images that have been developed in machine vision can be applied to planetary imagery. Present techniques, however, focus on one visual cue, such as shading or binocular stereo, and produce results that are either not very accurate in an absolute sense or provide information only at few points on the surface. We plan to integrate shape from shading, binocular stereo and photometric stereo to yield a robust system for recovering detailed surface shape and surface reflectance information. Such a system will be useful in producing quantitative information from the vast volume of imagery being received, as well as in helping visualize the underlying surface. The work will be carried out on a popular computing platform so that it will be easily accessible to other workers.

Horn, Berthold P.↗