Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Antimony-Doped Tin(II) Sulfide Thin Films

Thin-film solar cells made from earth-abundant, inexpensive, and nontoxic materials are needed to replace the current technologies whose widespread use is limited by their use of scarce, costly, and toxic elements.(1) Tin monosulfide (SnS) is a promising candidate for making absorber layers in scalable, inexpensive, and nontoxic solar cells. SnS has always been observed to be a p-type semiconductor. Doping SnS to form an n-type semiconductor would permit the construction of solar cells with p-n homojunctions. In this paper, we report doping SnS films with antimony, a potential n-type dopant. Small amounts of antimony (~1%) were found to greatly increase the electrical resistance of the SnS. The resulting intrinsic SnS(Sb) films could be used for the insulating layer in a p-i-n design for solar cells. Higher concentrations (~5%) of antimony did not convert the SnS(Sb) to low-resistivity n-type conductivity, but instead the films retain such a high resistance that the conductivity type could not be determined. Lastly, extended X-ray absorption fine structure analysis reveals that the highly doped films contain precipitates of a secondary phase that has chemical bonds characteristic of metallic antimony, rather than the antimony–sulfur bonds found in films with lower concentrations of antimony.

36 MATERIALS SCIENCE↗

Enhanced electron collection in TiO{sub 2} nanoparticle-based dye-sensitized solar cells by an array of metal micropillars on a planar fluorinated tin oxide anode.

Charge collection efficiency exhibits a strong influence on the overall efficiency of nanocrystalline dye-sensitized solar cells. It highly depends on the quality of the TiO{sub 2} nanoparticulate layer in the photoanode, and hence most efforts have been directed on the improvement and deliberate optimization of the quality the TiO{sub 2} nanocrystalline layer. In this work, we aim to reduce the electron collection distance between the place of origin in the TiO{sub 2} layer to the electron-collecting TCO anode as an alternative way to enhance the charge collection efficiency. We use an array of metal micropillars on fluorine-doped tin oxide (FTO) as the collecting anode. Under the same conditions, the Ni micropillar-on-FTO-based dye-sensitized solar cells (DSSCs) exhibit a remarkably enhanced current density, which is approximately 1.8 times greater compared with the bare FTO-based DSSCs. Electron transport was investigated using the electrochemical impedance spectroscopy technique. Our results reveal that the electron collection time in Ni micropillar-on-FTO-based DSSCs is much shorter than that of bare FTO-based DSSCs, indicating faster electron collection due to the Ni micropillars buried in TiO{sub 2} nanoparticulate layer that serve as electron transport shortcuts. As a result, the charge collection efficiency was enhanced by 15?20% with respect to that of the bare FTO-based DSSCs. Consequently, the overall energy conversion efficiency was found to increase from 2.6% in bare FTO-based DSSCs to 4.8% in Ni micropillar-on-FTO-based DSSCs for a 6 {micro}m-thick TiO{sub 2} NP film.

14 SOLAR ENERGY↗

Indium-Tin-Oxide-Based Transparent Conducting Layers for Highly Efficient Photovoltaic Devices

Additional hydrogen (H{sub 2}) annealing and subsequent electrochemical treatment are found to make tin-doped indium oxide (ITO)-based photoelectrodes suitable for highly efficient dye sensitized solar cells. The additional H{sub 2} annealing process recovered the electrical conductivity of the ITO film the same as its initial high conductivity, which enhanced the charge collecting property. Moreover, the employment of electrochemical oxidation of TiO{sub 2}/ITO photoelectrode improved the energy conversion efficiency of the ITO-based dye-sensitized solar cells (DSSC), higher than that of a conventional FTO-based DSSC. Electrochemical impedance analysis showed that the H2 annealing process reduced the internal resistance of the cell, i.e., the resistance of the ITO and the Schottky barrier at the TiO{sub 2}/ITO interface were reduced, and that the electrochemical treatment recovered the diodelike characteristics of the DSSC by retarding back electron transfer from the photoelectrode to the electrolyte. The present work demonstrates that thermally and electrochemically modified ITO-based photoelectrode is another alternative to the conventionally used FTO-based photoelectrode.

14 SOLAR ENERGY↗

Thermally evaporated methylammonium tin triiodide thin films for lead-free perovskite solar cell fabrication

Here, we report on the synthesis of methylammonium tin triiodide (MASnI 3 ) thin films at room temperature by a hybrid thermal evaporation method and their application in fabricating lead (Pb)-free perovskite solar cells. The as-deposited MASnI 3 thin films exhibit smooth surfaces, uniform coverage across the entire substrate, and strong crystallographic preferred orientation along the < 100 > direction. By incorporating this film with an inverted planar device architecture, our Pb-free perovskite solar cells are able to achieve an open-circuit voltage ( V oc ) up to 494 mV. The relatively high V oc is mainly ascribed to the excellent surface coverage, the compact morphology, the good stoichiometry control of the MASnI 3 thin films, and the effective passivation of the electron-blocking and hole-blocking layers. Finally, our results demonstrate the potential capability of the hybrid evaporation method to prepare high-quality Pb-free MASnI 3 perovskite thin films which can be used to fabricate efficient Pb-free perovskite solar cells.

14 SOLAR ENERGY↗

Cooperative tin oxide fullerene electron selective layers for high-performance planar perovskite solar cells

Both tin oxide (SnO 2 ) and fullerenes have been reported as electron selective layers (ESLs) for producing efficient lead halide perovskite solar cells. Here, we report that SnO 2 and fullerenes can work cooperatively to further boost the performance of perovskite solar cells. We find that fullerenes can be redissolved during perovskite deposition, allowing ultra-thin fullerenes to be retained at the interface and some dissolved fullerenes infiltrate into perovskite grain boundaries. The SnO 2 layer blocks holes effectively; whereas, the fullerenes promote electron transfer and passivate both the SnO 2 /perovskite interface and perovskite grain boundaries. With careful device optimization, the best-performing planar perovskite solar cell using a fullerene passivated SnO 2 ESL has achieved a steady-state efficiency of 17.75% and a power conversion efficiency of 19.12% with an open circuit voltage of 1.12 V, a short-circuit current density of 22.61 mA cm -2 , and a fill factor of 75.8% when measured under reverse voltage scanning. In conclusion, we find that the partial dissolving of fullerenes during perovskite deposition is the key for fabricating high-performance perovskite solar cells based on metal oxide/fullerene ESLs.

14 SOLAR ENERGY↗

Large-scale patterning of indium tin oxide electrodes for guided mode extraction from organic light-emitting diodes

We describe a cost-efficient and large area scalable production process of organic light-emitting diodes (OLEDs) with photonic crystals (PCs) as extraction elements for guided modes. Using laser interference lithography and physical plasma etching, we texture the indium tin oxide (ITO) electrode layer of an OLED with one- and two-dimensional PC gratings. By optical transmission measurements, the resonant mode of the grating is shown to have a drift of only 0.4% over the 5 mm length of the ITO grating. By changing the lattice constant between 300 and 600 nm, the OLED emission angle of enhanced light outcoupling is tailored from -24.25 deg. to 37 deg. At these angles, the TE emission is enhanced up to a factor of 2.14.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ferromagnetism of manganese-doped indium tin oxide films deposited on polyethylene naphthalate substrates

Mn-doped indium tin oxide (ITO) films were deposited on polyethylene naphthalate (PEN) substrates using radio-frequency magnetron sputtering. The magnetic, electrical, and optical properties of the films deposited on PEN substrates were investigated by comparing with the properties of films grown on glass substrates at the same growth conditions. Thin films on PEN substrates exhibited low electrical resistivity of the order of 10{sup -4} {omega} cm and high optical transmittance between 75% and 90% in the visible region. Ferromagnetic hysteresis loops were observed at room temperature for the samples grown on PEN substrates. Mn-doped ITO films can be one of the most promising candidates of transparent ferromagnetic materials for flexible spintronic devices.

36 MATERIALS SCIENCE↗

Thermal transport properties of polycrystalline tin-doped indium oxide films

Thermal diffusivity of polycrystalline tin-doped indium oxide (ITO) films with a thickness of 200 nm has been characterized quantitatively by subnanosecond laser pulse irradiation and thermoreflectance measurement. ITO films sandwiched by molybdenum (Mo) films were prepared on a fused silica substrate by dc magnetron sputtering using an oxide ceramic ITO target (90 wt %In{sub 2}O{sub 3} and 10 wt %SnO{sub 2}). The resistivity and carrier density of the ITO films ranged from 2.9x10{sup -4} to 3.2x10{sup -3} {omega} cm and from 1.9x10{sup 20} to 1.2x10{sup 21} cm{sup -3}, respectively. The thermal diffusivity of the ITO films was (1.5-2.2)x10{sup -6} m{sup 2}/s, depending on the electrical conductivity. The thermal conductivity carried by free electrons was estimated using the Wiedemann-Franz law. The phonon contribution to the heat transfer in ITO films with various resistivities was found to be almost constant ({lambda}{sub ph}=3.95 W/m K), which was about twice that for amorphous indium zinc oxide films.

36 MATERIALS SCIENCE↗

Effect of thermal processing on silver thin films of varying thickness deposited on zinc oxide and indium tin oxide

Silver films of varying thicknesses (25, 45, and 60 nm) were deposited on indium tin oxide (ITO) on silicon and zinc oxide (ZnO) on silicon. The films were annealed in vacuum for 1 h at different temperatures (300-650 deg. C). Four-point-probe measurements were used to determine the resistivity of the films. All films showed an abrupt change in resistivity beyond an onset temperature that varied with thickness. Rutherford backscattering spectrometry measurements revealed agglomeration of the Ag films upon annealing as being responsible for the resistivity change. X-ray pole figure analysis determined that the annealed films took on a preferential <111> texturing; however, the degree of texturing was significantly higher in Ag/ZnO/Si than in Ag/ITO/Si samples. This observation was accounted for by interface energy minimization. Atomic force microscopy (AFM) measurements revealed an increasing surface roughness of the annealed films with temperature. The resistivity behavior was explained by the counterbalancing effects of increasing crystallinity and surface roughness. Average surface roughness obtained from the AFM measurements were also used to model the agglomeration of Ag based on Ostwald ripening theory.

36 MATERIALS SCIENCE↗

GaN-based light-emitting diode with textured indium tin oxide transparent layer coated with Al{sub 2}O{sub 3} powder

Surface-textured InGaN/GaN light-emitting diodes (LEDs) coated with transparent Al{sub 2}O{sub 3} powder were fabricated by natural lithography combined with inductively coupled plasma etching. For surface texturing, 300 nm size Al{sub 2}O{sub 3} powder is used as an etching mask by simply coating the surface using a spin-coating process. Also, the powders are left on the surface after surface texturing to further increase extraction efficiency. At 20 mA, the light output power of the textured indium tin oxide (ITO) InGaN/GaN LEDs coated with the Al{sub 2}O{sub 3} powder is enhanced by {approx}112% compared with the conventional nontextured ITO LED. The enhanced light output power is attributed to the improved extraction efficiency resulting from an overall decrease in the total internal reflection due to the textured surface and the Al{sub 2}O{sub 3} powder coating.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

In situ formation of tin nanocrystals embedded in silicon nitride matrix

Tin (Sn) nanocrystals (NCs) embedded in a silicon nitride (Si{sub 3}N{sub 4}) matrix have been fabricated in a cosputtering process employing low temperature (100 deg. C) substrate heating. Transmission electron microscopy (TEM) showed the formation of uniformly sized Sn NCs of 5.2+-0.9 nm evenly distributed in the Si{sub 3}N{sub 4} matrix. Both TEM and x-ray diffraction measurements showed that the Sn NCs adopted the semimetallic tetragonal beta-Sn structure rather than the cubic semiconducting alpha-Sn structure. X-ray photoelectron spectroscopy revealed that the semimetallic state (Sn{sup 0}) is the major component of Sn in the sample films. Our investigation demonstrates a pronounced effect of the substrate temperature on the formation of Sn NCs. The mechanism of in situ formation of Sn NCs is discussed. We suggest that the formation of uniformly sized Sn NCs is correlated with lowering the surface mobility of the nuclei due to the presence of the cosputtered Si{sub 3}N{sub 4}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microporous SiO{sub 2} with huge electric-double-layer capacitance for low-voltage indium tin oxide thin-film transistors

Electric-double-layer (EDL) effect is observed in microporous SiO{sub 2} dielectric films deposited at room temperature by plasma-enhanced chemical vapor deposition method. Indium tin oxide thin-film transistors gated by such microporous SiO{sub 2} gate dielectric are fabricated at room temperature, and a low operating voltage of 1.5 V is obtained due to the huge EDL specific capacitance (2.14 {mu}F/cm{sup 2}). The field-effect electron mobility is estimated to be 118 cm{sup 2} V{sup -1} s{sup -1}. Current on/off ratio and subthreshold gate voltage swing are estimated to be 5x10{sup 6} and 92 mV/decade, respectively. Room-temperature deposited microporous SiO{sub 2} dielectric is promising for low-power field-effect transistors on temperature sensitive substrates.

36 MATERIALS SCIENCE↗

The effect of excitation wavelength on dynamics of laser-produced tin plasma

We investigated the effect of the excitation wavelength on the density evolution of laser-produced tin plasmas, both experimentally and numerically. For producing plasmas, Sn targets were excited with either 10.6 {mu}m CO{sub 2} laser or 1.06 {mu}m Nd:yttrium aluminum garnet laser; both are considered to be potential excitation lasers for extreme ultraviolet lithography laser-produced plasma light sources. The electron density of the plasma during the isothermal expansion regime was estimated using an interferometric technique. The Stark broadening of isolated singly-ionized emission was employed for deducing the density during the plasma adiabatic expansion regime. Our results indicate that the excitation source wavelength determines the initial density of the plasma, as well the plume expansion dynamics. Numerical simulation using HEIGHTS simulation package agrees well with the experimentally measured density profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of particle velocity in a laser-produced tin plasma extreme ultraviolet source

In connection with fast heating in a laser produced plasma (LPP) extreme ultraviolet (EUV) source, the superheating behavior of bulk tin (Sn) at high heating rates is investigated. A constant temperature and pressure molecular dynamics simulation using modified Lennard-Jones and Coulomb potentials suitable for studying the liquid structure of Sn is employed in order to derive the caloric curves of the solid and liquid phases. The results have shown transient effects on the phase transitions. Superheating is observed during the melting and vaporizing processes. The velocity distribution of Sn particles against typical laser fluence in a LPP EUV light source has been numerically investigated using a simplified method including a one-dimensional, two-temperature, molecular dynamics, and steady-state ionization model. In the framework of our model, it was found that ejected Sn particles have a maximum velocity on the order of 10 to 40 km/s in plasma created using a nanosecond pre-pulse neodymium-doped yttrium aluminum garnet (Nd:YAG, 1.06 {mu}m) laser in EUV lithography experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Indium-tin-oxide-free tris(8-hydroxyquinoline) Al organic light-emitting diodes with 80% enhanced power efficiency

Efficient indium tin oxide (ITO)-free small molecule organic light-emitting diodes (SMOLEDs) with multilayered highly conductive poly(3,4-ethylenedioxy thiophene):poly(styrenesulfonate) (PEDOT:PSS) as the anode are demonstrated. PEDOT:PSS/MoO{sub 3}/N,N'-diphenyl- N,N'-bis(1-naphthylphenyl)-1,1'-biphenyl-4,4'-diamine (NPD)/tris(8-hydroxyquinoline) Al (Alq{sub 3})/4,7-diphenyl-1,10-phenanthroline (BPhen)/LiF/Al SMOLEDs exhibited a peak power efficiency of 3.82 lm/W, 81% higher than that of similar ITO-based SMOLEDs (2.11 lm/W). The improved performance is believed to be due to the higher work function, lower refractive index, and decreased surface roughness of PEDOT:PSS vs ITO, and to Ohmic hole injection from PEDOT:PSS to the NPD layer via the MoO{sub 3} interlayer. The results demonstrate that PEDOT:PSS can substitute ITO in SMOLEDs with strongly improved device performance.

14 SOLAR ENERGY↗

Electronic states at the interface between indium tin oxide and silicon

Electronic properties and thermal stability of interfacial states between indium tin oxide (ITO) and monocrystalline silicon (Si) have been investigated. ITO films with thicknesses of about 300 nm were deposited by dc magnetron sputtering on n- and p-type (100) Si at room temperature. The samples were then annealed for 30 min at different temperatures in the range 100-600 deg. C, and the ITO-Si junction was found to exhibit rectifying behavior. Current-voltage (IV), capacitance-voltage (CV), and deep-level transient spectroscopy (DLTS) measurements have been used to electrically characterize the ITO-Si interface. DLTS measurements on p-type Si samples reveal a dominant hole trap at around 0.37 eV above the valence band edge. In the n-type samples, a broad band of electron traps occur in the range 0.1-0.2 eV below the conduction band edge. These electron traps display wide DLTS peaks, indicating a band of electronic energy levels rather than well-defined states originating from isolated point defects. All the traps in both the p- and n-type samples are found to be located near the ITO-Si interface. Investigations of the thermal stability of the observed electronic states show that the dominant hole trap anneal out after 30 min at 250 deg. C, while the dominant electron traps can be stable up to 500 deg. C. IV and DLTS measurements demonstrate a clear correlation between the annealing of the dominant electronic states and increase in the junction rectification.

36 MATERIALS SCIENCE↗

The electronic structure of co-sputtered zinc indium tin oxide thin films

Zinc indium tin oxide (ZITO) transparent conductive oxide layers were deposited via radio frequency (RF) magnetron co-sputtering at room temperature. A series of samples with gradually varying zinc content was investigated. The samples were characterized with x-ray and ultraviolet photoemission spectroscopy (XPS, UPS) to determine the electronic structure of the surface. Valence and conduction bands maxima (VBM, CBM), and work function were determined. The experiments indicate that increasing Zn content results in films with a higher defect rate at the surface leading to the formation of a degenerately doped surface layer if the Zn content surpasses {approx}50%. Furthermore, the experiments demonstrate that ZITO is susceptible to ultraviolet light induced work function reduction, similar to what was earlier observed on ITO and TiO{sub 2} films.

36 MATERIALS SCIENCE↗