Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “theoretical models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Aircraft wake dissipation by sinusoidal instability and vortex breakdown.

Sinusoidal instability of aircraft trailing vortices was induced by differentially oscillating inboard and outboard flaps on a model wing in a ship towing tank. Measured amplification rates qualitatively agree with theoretical predictions. Axial velocities in the vortex core were directed towards the wing and measured to be approximately 25% of the tow speed. Vortex breakdown was observed to occur along trailers undergoing sinusoidal instability near but ahead (towards the wing) of positions of maximum trailer separation. It is shown that axisymmetric pressure gradients are imposed along the vortex core by the other sinusoidally deformed trailer and are responsible for the observed changes in core diameter. A theoretical model predicts the short-time behavior of the vortex core and shows that the response of the vortex depends crucially on the axial velocity in the vortex.

Bilanin, A. J.↗

Ion-induced nucleation in a binary mixture

Recent ion-induced nucleation studies in a binary mixture of H2O and H2SO4 vapors indicate that conventional classical nucleation theories cannot account for the experimentally observed ion-H2O-H2SO4 microcluster spectra. An empirical-analytical, semi-molecular theory of nucleation of a binary mixture of vapors on ions has been developed. This theory includes molecular approach to ion-induced changes in dielectric properties in the immediate neighborhood of an ion core as well as the size dependence of the surface tension of the microcluster. In addition to gaseous sulfuric acid and water molecules, the effect of ion-hydrates and sulfuric acid hydrates has also been considered. This theory is further simplified by using an empirical correction factor for the electrostatic term. This correction factor has been obtained by comparing the simplified model with the molecular dynamics calculations for selected ion hydrate formation. These two theoretical models are then compared with the classical theory for a variety of experimental conditions.

Smith, A. C.↗

Ab initio study of the alkali and alkaline-earth monohydroxides

A systematic study of the structures and dissociation energies of all the alkali and alkaline-earth monohydroxides is conducted. A theoretical model for determining accurate dissociation energies of ionic molecules is discussed. The obtained theoretical structures and dissociation energies of the alkali and alkaline-earth monohydroxides, respectively, are compared with experimental data. It is found that the theoretical studies of the bending potentials of BeOH, MgOH, and CaOH reveal the different admixture of covalent character in these systems. The BeOH molecule with the largest degree of covalent character is found to be bent (theta equals 147 deg). The MgOH is also linear. The theoretical dissociation energies for the alkali and akaline-earth hydroxides are thought to be accurate to 0.1 eV.

Bauschlicher, C. W., Jr.↗

Direct solar-pumped iodine laser amplifier

The improvement on the collection system of the Tarmarack Solar Simulator beam was attemped. The basic study of evaluating the solid state laser materials for the solar pumping and also the work to construct a kinetic model algorithm for the flashlamp pumped iodine lasers were carried out. It was observed that the collector cone worked better than the lens assembly in order to collect the solar simulator beam and to focus it down to a strong power density. The study on the various laser materials and their lasing characteristics shows that the neodymium and chromium co-doped gadolinium scandium gallium garnet (Nr:Cr:GSGG) may be a strong candidate for the high power solar pumped solid state laser crystal. On the other hand the improved kinetic modeling for the flashlamp pumped iodine laser provides a good agreement between the theoretical model and the experimental data on the laser power output, and predicts the output parameters of a solar pumped iodine laser.

Han, Kwang S.↗

Vibrationally excited molecular hydrogen in the upper atmosphere of Jupiter

A comprehensive theoretical model for vibrationally excited H2 in the upper atmosphere of Jupiter is presented. Theoretical calculations demonstrate the probable existence of significantly enhanced populations of vibrationally excited H2 in the Jovian upper atmosphere, especially in the auroral regions. It is also shown that this H2 is an important chemical sink of H(+) ions in the Jovian ionosphere and thus has a significant effect on the calculated ionospheric electron densities.

Cravens, T. E.↗

The development and analysis of geopotential coefficient models to spherical harmonic degree 360

Two new geopotential coefficient models to spherical harmonic degree 360 are developed using recent advances made in theoretical modeling methods, satellite gravitational models, and expanded and improved terrestrial data. The new models are based on the combination of a satellite potential coefficient model (GEM-T2) to degree 50 with 30-arc mean gravity anomalies, yielding an adjusted set of coefficients and gravity anomalies, which were then harmonically analyzed to yield a set of potential coefficients to degree 360. The models were verified in several ways including satellite orbit residual analysis, demonstrating a substantial improvement over previous high-degree expansions.

Rapp, Richard H.↗

Remote sensing of Earth terrain

Progress report on remote sensing of Earth terrain covering the period from Jan. to June 1993 is presented. Areas of research include: radiative transfer model for active and passive remote sensing of vegetation canopy; polarimetric thermal emission from rough ocean surfaces; polarimetric passive remote sensing of ocean wind vectors; polarimetric thermal emission from periodic water surfaces; layer model with tandom spheriodal scatterers for remote sensing of vegetation canopy; application of theoretical models to active and passive remote sensing of saline ice; radiative transfer theory for polarimetric remote sensing of pine forest; scattering of electromagnetic waves from a dense medium consisting of correlated mie scatterers with size distributions and applications to dry snow; variance of phase fluctuations of waves propagating through a random medium; polarimetric signatures of a canopy of dielectric cylinders based on first and second order vector radiative transfer theory; branching model for vegetation; polarimetric passive remote sensing of periodic surfaces; composite volume and surface scattering model; and radar image classification.

Kong, J. A.↗

The Rb 780-nanometer Faraday anomalous dispersion optical filter: Theory and experiment

The Faraday anomalous dispersion optical filter may provide ultra-high background noise rejection for free-space laser communications systems. The theoretical model for the filter is reported. The experimental measurements and their comparison with theoretical results are discussed. The results show that the filter can provide a 56-dB solar background noise rejection with about a 2-GHz transmission bandwidth and no image degradation. To further increase the background noise rejection, a composite Zeeman and Faraday anomalous dispersion optical filter is designed and experimentally demonstrated.

Yin, B.↗

Solute Nucleation and Growth in Supercritical Fluid Mixtures

This research effort is directed toward two primary scientific objectives: (1) to determine the gravitational effect on the measurement of nucleation and growth rates near a critical point and (2) to investigate the nucleation process in supercritical fluids to aid in the evaluation and development of existing theoretical models and practical applications. A nucleation pulse method will be employed for this investigation using a rapid expansion to a supersaturated state that is maintained for approximately 1 ms followed by a rapid recompression to a less supersaturated state that effectively terminates nucleation while permitting growth to continue. Nucleation, which occurs during the initial supersaturated state, is decoupled from growth by producing rapid pressure changes. Thermodynamic analysis, condensation modeling, apparatus design, and optical diagnostic design necessary for the initiation of a theoretical and experimental investigation of naphthalene nucleation from supercritical CO2 have been completed.

Smedley, Gregory T.↗

The Magellan Evolution of Galaxies Spectroscopic and Ultraviolet Reference Atlas (MegaSaura). II. Stacked Spectra

We stack the rest-frame ultraviolet spectra of N = 14 highly magnified gravitationally lensed galaxies at redshifts 1.6 < z < 3.6. The resulting new composite spans 900 < lambda rest < 3000 Angstrom, with a peak signal-to-noise ratio of 103 per spectral resolution element (approximately 100 km s (exp -1)). It is the highest signalto-noise ratio, highest spectral resolution composite spectrum of z approximately 2-3 galaxies yet published. The composite reveals numerous weak nebular emission lines and stellar photospheric absorption lines that can serve as new physical diagnostics, particularly at high redshift with the James Webb Space Telescope (JWST). We report equivalent widths to aid in proposing for and interpreting JWST spectra. We examine the velocity profiles of strong absorption features in the composite, and in a matched composite of z approximately 0 COS/HST galaxy spectra. We find remarkable similarity in the velocity profiles at z approximately 0 and z approximately 2, suggesting that similar physical processes control the outflows across cosmic time. While the maximum outflow velocity depends strongly on ionization potential, the absorptionweighted mean velocity does not. As such, the bulk of the high-ionization absorption traces the low-ionization gas, with an additional blueshifted absorption tail extending to at least approximately 2000 km s (exp -1). We interpret this tail as arising from the stellar wind and photospheres of massive stars. Starburst99 models are able to replicate this high-velocity absorption tail. However, these theoretical models poorly reproduce several of the photospheric absorption features, indicating that improvements are needed to match observational constraints on the massive stellar content of star-forming galaxies at z approximately 2. We publicly release our composite spectra.

Rigby, J. R.↗

An exactly solvable model for calculating critical misfit and thickness in epitaxial superlattices. II - Layers of unequal elastic constants and thicknesses

The theoretical model developed by van der Merwe and Jesser (1988) is extended to permit the exact determination of the critical misfit and critical thickness of an epitaxially grown superlattice made up of layers with differing elastic constants and thicknesses. Lateral force balances are maintained by means of an explicit relationship between the homogeneous misfit strains and the thicknesses and moduli. A number of simplifying approximations are introduced, and sample numerical results are presented in graphs.

Jesser, W. A.↗

Comparison of Integrated Radiation Transport Models with TEPC Measurements for the Average Quality Factors in Spaceflights

The purpose of this work is to test our theoretical model for the interpretation of radiation data measured in space. During the space missions astronauts are exposed to the complex field of radiation type and kinetic energies from galactic cosmic rays (GCR), trapped protons, and sometimes solar particle events (SPEs). The tissue equivalent proportional counter (TEPC) is a simple time-dependent approach for radiation monitoring for astronauts on board the International Space Station. Another and a newer approach to Microdosimetry is the use of silicon-on-insulator (SOI) technology launched on the MidSTAR-1 mission in low Earth orbit (LEO). In the radiation protection practice, the average quality factor of a radiation field is defined as a function of linear energy transfer (LET), Q(sub ave)(LET). However, TEPC measures the average quality factor as a function of the lineal energy y, Q(sub ave)(y), defined as the average energy deposition in a volume divided by the average chord length of the volume. Lineal energy, y, deviates from LET due to energy straggling, delta-ray escape or entry, and nuclear fragments produced in the detector volume. Monte Carlo track structure simulation was employed to obtain the response of a TEPC irradiated with charged particle for an equivalent site diameter of 1 micron of wall-less counter. The calculated data of the energy absorption in the wall-less counter were compiled for various y values for several ion types at various discrete projectile energy levels. For the simulation of TEPC response from the mixed radiation environments inside a spacecraft, such as, Space Shuttle and International Space Station, the complete microdosimetric TEPC response, f( y, E, Z), were calculated with the Monte Carlo theoretical results by using the first order Lagrangian interpolation for a monovariate function at a given y value (y = 0.1 keV/micron 5000 keV/micron) at any projectile energy level (E = 0.01 MeV/u to 50,000 MeV/u) of each specific radiation type (Z = 1 to 28). Because the anomalous response has been observed at large event sizes in the experiment due to the escape of energy out of sensitive volume by delta-rays and the entry of delta-rays from the high-density wall into the low-density gas-volume cavity, Monte Carlo simulation was also made for the response of a walled-TEPC with wall thickness 2 mm and density 1 g/cm(exp 3). The radius of cavity was set to 6.35 mm and a gas density 7.874 x 10(exp -5) g/cm(exp 3). The response of the walled- and the wall-less counters were compared. The average quality factor Q(sub ave)(y) for trapped protons on STS-89 demonstrated the good agreement between the model calculations and flight TEPC data as shown. Using an integrated space radiation model (this includes the transport codes HZETRN and BRYNTRN, the quantum nuclear interaction model QMSFRG) and the resultant response distribution functions of walled-TEPC from Monte-Carlo track simulations, we compared model calculations with walled-TEPC measurements from NASA missions in LEO and made predictions for the lunar and the Mars missions. The Q(sub ave)(y) values for the trapped or the solar protons ranged from 1.9-2.5. This over-estimates the Qave(LET) values which ranged from 1.4-1.6. Both quantities increase with shield thickness due to nuclear fragmentation. The Q(sub ave)(LET) for the complete GCR spectra was found to be 3.5-4.5, while flight TEPCs measured 2.9-3.4 for Q(sub ave)(y). The GCR values are decreasing with the shield thickness. Our analysis for a proper interpretation of data supports the use of TEPCs for monitoring space radiation environment.

Kim, Myung-Hee Y.↗

A Computationally-Efficient, Multi-Mechanism Based Framework for the Comprehensive Modeling of the Evolutionary Behavior of Shape Memory Alloys

The report summarizes the accomplishments made during the 4-year duration of the project. Here, the major emphasis is placed on the different tasks performed by the two research teams; i.e., the modeling activities by the University of Akron (UA) team and the experimental and neutron diffraction studies conducted by the University of Central Florida (UCF) team, during this 4-year period. Further technical details are given in the upcoming sections by UA and UCF for each of the milestones/years (together with the corresponding figures and captions).The project majorly involved the development, validation, and application of a general theoretical model that is capable of capturing the nonlinear hysteretic responses, including pseudoelasticity, shape memory effect, rate-dependency, multi-axiality, asymmetry in tension versus compression response of shape memory alloys. Among the targeted goals for the SMA model was its ability to account for the evolutionary character response (including transient and long term behavior under sustained cycles) for both conventional and high temperature (HT) SMAs, as well as being able to simulate some of the devices which exploit these unique material systems. This required extensive (uniaxial and multi-axial) experiments needed to guide us in calibrating and characterizing the model. Moreover, since the model is formulated on the theoretical notion of internal state variables (ISVs), neutron diffraction experiments were needed to establish the linkage between the micromechanical changes and these ISVs. In addition, the design of the model should allow easy implementation in large scale finite element application to study the behavior of devices making use of these SMA materials under different loading controls. Summary of the activities, progress/achievements made during this period is given below in details for the University of Akron and the University (Section 2.0) of Central Florida (Section 3.0).

Alloys↗

Data analysis and interpretation related to space system/environment interactions at LEO altitude

Several studies made on the interaction of active systems with the LEO space environment experienced from orbital or suborbital platforms are covered. The issue of high voltage space interaction is covered by theoretical modeling studies of the interaction of charged solar cell arrays with the ionospheric plasma. The theoretical studies were complemented by experimental measurements made in a vacuum chamber. The other active system studied was the emission of effluent from a space platform. In one study the emission of plasma into the LEO environment was studied by using initially a 2-D model, and then extending this model to 3-D to correctly take account of plasma motion parallel to the geomagnetic field. The other effluent studies related to the releases of neutral gas from an orbiting platform. One model which was extended and used determined the density, velocity, and energy of both an effluent gas and the ambient upper atmospheric gases over a large volume around the platform. This model was adapted to study both ambient and contaminant distributions around smaller objects in the orbital frame of reference with scale sizes of 1 m. The other effluent studies related to the interaction of the released neutral gas with the ambient ionospheric plasma. An electrostatic model was used to help understand anomalously high plasma densities measured at times in the vicinity of the space shuttle orbiter.

Raitt, W. John↗

CNO abundances and hydrodynamic models of the Nova outbursts. 4: Comparison with observations

A variety of observations of novae are discussed in light of theoretical models. It is proposed that the nearly constant bolometric luminosity of FH Ser originates in the non-degenerate hydrogen-burning region at the bottom of the hydrogen-rich envelope which remains after the primary ejection. The shift of the wavelength of peak emission from the visual to shortward of the ultraviolet is caused by the decrease of the photospheric radius of the remnant envelope as the bolometric luminosity stays nearly constant. The oscillations in the light curve of GK Per during the transition stage can be explained by a pulsation of the remnant envelope when it is the size of the Roche lobe. The CNO over-abundances in novae reported by various observers are strongly suggestive of this nova mechanism. Finally, the implications of the upper limits of C-13 and N-15 in DQ Her are discussed.

Sparks, W. M.↗

CNO abundances and hydrodynamic models of the nova outburst. IV - Comparison with observations

A variety of observations of novae are discussed in light of theoretical models. It is proposed that the nearly constant bolometric luminosity of FH Ser originates in the nondegenerate hydrogen-burning region at the bottom of the hydrogen-rich envelope which remains after the primary ejection. The shift of the wavelength of peak emission from the visual to shortward of the ultraviolet is caused by the decrease of the photospheric radius of the remnant envelope as the bolometric luminosity stays nearly constant. The oscillations in the light curve of GK Per during the transition stage can be explained by a pulsation of the remnant envelope when it is larger than the semimajor axis of the binary system. The CNO overabundances in novae reported by various observers are strongly suggestive of the proposed nova mechanism. Implications of the upper limits on C-13 and N-15 found in DQ Her are discussed.

Sparks, W. M.↗

Comparison of GSFC and JPL VLBI modeling software: Benchmark

The Very Long Base Interferometry. The VLBI modeling software packages CALC 6.0 (GSFC) and MASTERFIT (JPL) are compared in some detail. Theoretical model delays are calculated for a set of 120 fictitious observations which involve a variety of sources, baselines, and antennas. Discrepancies between the total delays given by the two programs are of the order of 2 cm (RMS). The modeling of antenna offsets appears to account for approximately half of this difference. Relativistic bending contributions to the delay differ by 3 cm (RMS), and the there appears to be some mutual cancellation of errors involving antenna offsets, bending, and the effects of the two different Solar System ephemerides employed by CALC and MASTERFIT. This cancellation has not been completely characterized here.

Sovers, O. J.↗

Modeling and data analysis of the NASA-WSTF frictional heating apparatus - Effects of test parameters on friction coefficient

A theoretical model is being developed jointly by the NASA White Sands Test Facility (WSTF) and the University of California at Santa Barbara (UCSB) to analyze data generated from the WSTF frictional heating test facility. Analyses of the data generated in the first seconds of the frictional heating test are shown to be effective in determining the friction coefficient between the rubbing interfaces. Different friction coefficients for carobn steel and Monel K-500 are observed. The initial condition of the surface is shown to affect only the initial value of the friction coefficient but to have no significant influence on the average steady-state friction coefficient. Rotational speed and the formation of oxide film on the rotating surfaces are shown to have a significant effect on the friction coefficient.

Zhu, Sheng-Hu↗