Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “telerobotic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Automation, robotics, and inflight training for manned Mars missions

The automation, robotics, and inflight training requirements of manned Mars missions will be supported by similar capabilities developed for the space station program. Evolutionary space station onboard training facilities will allow the crewmembers to minimize the amount of training received on the ground by providing extensive onboard access to system and experiment malfunction procedures, maintenance procedures, repair procedures, and associated video sequences. Considerable on-the-job training will also be conducted for space station management, mobile remote manipulator operations, proximity operations with the Orbital Maneuvering Vehicle (and later the Orbit Transfer Vehicle), and telerobotics and mobile robots. A similar approach could be used for manned Mars mission training with significant additions such as high fidelity image generation and simulation systems such as holographic projection systems for Mars landing, ascent, and rendezvous training. In addition, a substantial increase in the use of automation and robotics for hazardous and tedious tasks would be expected for Mars mission. Mobile robots may be used to assist in the assembly, test and checkout of the Mars spacecraft, in the handling of nuclear components and hazardous chemical propellent transfer operations, in major spacecraft repair tasks which might be needed (repair of a micrometeroid penetration, for example), in the construction of a Mars base, and for routine maintenance of the base when unmanned.

Holt, Alan C.↗
NASA NTRS1986

The evolution of automation and robotics in manned spaceflight

The evolution of automation on all manned spacecraft including the Space Shuttle is reviewed, and a concept for increasing automation and robotics from the current Shuttle Remote Manipulator System (RMS) to an autonomous system is presented. The requirements for robotic elements are identified for various functions on the Space Station, including extravehicular functions and functions within laboratory and habitation modules which expand man's capacity in space and allow selected teleoperation from the ground. The initial Space Station will employ a telerobot and necessary knowledge based systems as an advisory to the crew on monitoring, fault diagnosis, and short term planning and scheduling.

Moser, T. L.↗
NASA NTRS1986

Space Station as a vital focus for advancing the technologies of automation and robotics

The application of robotics and automation technologies to the Space Station design is examined. Experiments being conducted in the fields of autonomy and robotics, and the benefits provided by these technologies are discussed. The use of automation and robotics in the operation management, the power system, and telerobot of the Space Station is described.

Varsi, G.↗
NASA NTRS1986

Technologies for affordable access to space

NASA plans for advanced research and technology programs aimed at reducing operating costs and extending the capability of future space systems are described. The evolution of an almost entirely space-based mode is discussed, including the role of earth launch, servicing, fabrication and assembly and communications. The development of technology for affordable access to space is examined, taking into account progress in the areas of telerobotics, machine autonomy, human autonomy, space-based manufacturing and construction, electric power, and space-based propulsion.

Colladay, R. S.↗
NASA NTRS1986

New shape in the sky

The 'dual keel' design currently under consideration for NASA's Space Station program is of rectangular configuration to yield greater space along the truss structure for the attachment of payloads, by comparison with a previously considered single-keel truss design. The placing of the pressurized modules much nearer the center of gravity of this station configuration allows accelerations that are closer to 1 micro-g than the earlier alternative. The U.S. Servicing Facility and Telerobotic System, and the Canadian Mobile Servicing Center, will be incorporated in order to meet a large variety of Space Station servicing requirements.

Aaron, J. W.↗
NASA NTRS1986

Virtual interface environment

A head-mounted, wide-angle, stereoscopic display system controlled by operator position, voice and gesture has been developed for use as a multipurpose interface environment. The system provides a multisensory, interactive display environment in which a user can virtually explore a 360-degree synthesized or remotely sensed environment and can viscerally interact with its components. Primary applications of the system are in telerobotics, management of large-scale integrated information systems, and human factors research. System configuration, application scenarios, and research directions are described.

Fisher, Scott S.↗
NASA NTRS1985

Overview of the NASA automation and robotics research program

NASA studies over the last eight years have identified five opportunities for the application of automation and robotics technology: (1) satellite servicing; (2) system monitoring, control, sequencing and diagnosis; (3) space manufacturing; (4) space structure assembly; and (5) planetary rovers. The development of these opportunities entails two technology R&D thrusts: telerobotics and system autonomy; both encompass such concerns as operator interface, task planning and reasoning, control execution, sensing, and systems integration.

Holcomb, Lee↗
NASA NTRS1987

Manned spacecraft automation and robotics

The Space Station holds promise of being a showcase user and driver of advanced automation and robotics technology. The author addresses the advances in automation and robotics from the Space Shuttle - with its high-reliability redundancy management and fault tolerance design and its remote manipulator system - to the projected knowledge-based systems for monitoring, control, fault diagnosis, planning, and scheduling, and the telerobotic systems of the future Space Station.

Erickson, Jon D.↗
NASA NTRS1986

The NASA automation and robotics technology program

The development and objectives of the NASA automation and robotics technology program are reviewed. The objectives of the program are to utilize AI and robotics to increase the probability of mission success; decrease the cost of ground control; and increase the capability and flexibility of space operations. There is a need for real-time computational capability; an effective man-machine interface; and techniques to validate automated systems. Current programs in the areas of sensing and perception, task planning and reasoning, control execution, operator interface, and system architecture and integration are described. Programs aimed at demonstrating the capabilities of telerobotics and system autonomy are discussed.

Holcomb, Lee B.↗
NASA NTRS1987

Autonomous control procedures for shuttle rendezvous proximity operations

The results are presented of a study which uses fuzzy sets to model a Space Shuttle pilot's reasoning and actions while performing rendezvous proximity operation maneuvers. In this model fuzzy sets are used to simulate smooth and continuous actions as would be expected from an experienced pilot and to simulate common sense reasoning in the decision process. The present model assumes visual information available to the Shuttle pilot from the Shuttle Crew Optical Alignment Sighting (COAS) device and the overhead window and rendezvous radar sensor information available to him from an onboard display. This model will be used in a flight analysis simulator to perform studies requiring a large number of runs, each of which currently needs an engineer in the loop to supply the piloting decisions. This work has much broader implications in control of robots such as the Flight Telerobotic Servicer, in automated pilot control and attitude control, and in advisory and evaluation functions that could be used for flight data monitoring or for testing of various rule sets in flight preparation.

Lea, Robert N.↗
NASA NTRS1988

Space station mobile transporter

The first quarter of the next century will see an operational space station that will provide a permanently manned base for satellite servicing, multiple strategic scientific and commercial payload deployment, and Orbital Maneuvering Vehicle/Orbital Transfer Vehicle (OMV/OTV) retrieval replenishment and deployment. The space station, as conceived, is constructed in orbit and will be maintained in orbit. The construction, servicing, maintenance and deployment tasks, when coupled with the size of the station, dictate that some form of transportation and manipulation device be conceived. The Transporter described will work in conjunction with the Orbiter and an Assembly Work Platform (AWP) to construct the Work Station. The Transporter will also work in conjunction with the Mobile Remote Servicer to service and install payloads, retrieve, service and deploy satellites, and service and maintain the station itself. The Transporter involved in station construction when mounted on the AWP and later supporting a maintenance or inspection task with the Mobile Remote Servicer and the Flight Telerobotic Servicer is shown.

Renshall, James↗
NASA NTRS1988

Roller drive materials performance

Roller traction performance basics, a test program to measure performance, and the need for and typical use of the information are outlined. A test rig was designed and fabricated to develop this information. Parametric conditions and specimen materials were chosen so that the resulting data will be valuable to the design and development of advanced, roller-driven space mechanisms, from precision positioning devices to telerobot joints.

Rohn, Douglas A.↗
NASA NTRS1988

Virtual interface environment

A head-mounted, wide-angle, stereoscopic display system controlled by operator position, voice and gesture is under development for use as a multipurpose interface environment. Initial applications of the system are in telerobotics, data-management and human factors research. System configuration and research directions are described.

Fisher, Scott S.↗
NASA NTRS1988

Diagnosing faults in autonomous robot plan execution

A major requirement for an autonomous robot is the capability to diagnose faults during plan execution in an uncertain environment. Many diagnostic researches concentrate only on hardware failures within an autonomous robot. Taking a different approach, the implementation of a Telerobot Diagnostic System that addresses, in addition to the hardware failures, failures caused by unexpected event changes in the environment or failures due to plan errors, is described. One feature of the system is the utilization of task-plan knowledge and context information to deduce fault symptoms. This forward deduction provides valuable information on past activities and the current expectations of a robotic event, both of which can guide the plan-execution inference process. The inference process adopts a model-based technique to recreate the plan-execution process and to confirm fault-source hypotheses. This technique allows the system to diagnose multiple faults due to either unexpected plan failures or hardware errors. This research initiates a major effort to investigate relationships between hardware faults and plan errors, relationships which were not addressed in the past. The results of this research will provide a clear understanding of how to generate a better task planner for an autonomous robot and how to recover the robot from faults in a critical environment.

Lam, Raymond K.↗
NASA NTRS1987

Implementation of RCCL, a robot control C library on a microVAX II

The robot control C library (RCCL), a high-level robot programing system which enables a progammer to employ a set of system calls to specify robot manipulator tasks, is discussed. The general structure of RCCL is described, and the implementation of RCCL on a microVAX II is examined. Proposed extensions and improvements of RCCL relevant to NASA's telerobotic system are addressed.

Lee, Jin S.↗
NASA NTRS1987

Virtual workstation - A multimodal, stereoscopic display environment

A head-mounted, wide-angle, stereoscopic display system controlled by operator position, voice and gesture has been developed for use in a multipurpose interface environment. The system provides a multisensory, interactive display environment in which a user can virtually explore a 360-degree synthesized or remotely sensed environment and can viscerally interact with its components. Primary applications of the system are in telerobotics, management of large-scale integrated information systems, and human factors research. System configuration, application scenarios, and research directions are described.

Fisher, S. S.↗
NASA NTRS1987

The use of computer graphic simulation in the development of on-orbit tele-robotic systems

This paper describes the use of computer graphic simulation techniques to resolve critical design and operational issues for robotic systems used for on-orbit operations. These issues are robot motion control, robot path-planning/verification, and robot dynamics. The major design issues in developing effective telerobotic systems are discussed, and the use of ROBOSIM, a NASA-developed computer graphic simulation tool, to address these issues is presented. Simulation plans for the Space Station and the Orbital Maneuvering Vehicle are presented and discussed.

Fernandez, Ken↗
NASA NTRS1988

Space Station user Servicing System architecture and operational aspects

The structure of the Space Station Servicing System architecture, operational aspects of the system, and the potential evolution of the servicing capabilities to accomodate a variety of missions are disscussed. Services to be performed include replacement or repair of failed modules, subsystems or parts, replacement or upgrading of spacecraft or instrument subsystems, replacement of limited lifetime subsystems or components, replenishment of consumables, and assembly of attached payloads and instruments. Elements of the system discussed include intravehicular servicing, the flight telerobotic servicer, and the mobile servicing center. Ground, preservicing, extravehicular and intravehicular servicing, and postservicing operations are examined. Also, a typical mission scenario for mature servicing operations is given.

Cline, Helmut P.↗