Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “suspensions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Change in the coil distribution of electrodynamic suspension system

At the Miyazaki Maglev Test Center, the initial test runs were completed using a system design that required the superconducting coils to be parallel with the ground levitation coils. Recently, the coil distribution was changed to a system such that the two types of coils were perpendicular to each other. Further system changes will lead to the construction of a side wall levitation system. It is hoped that the development will culminate in a system whereby a superconducting coil will maintain all the functions: levitation, propulsion, and guidance.

Tanaka, Hisashi↗
NASA NTRS1992

Muscle sarcomere lesions and thrombosis after spaceflight and suspension unloading

Data obtained during Cosmos 2044 bisatellite mission are reviewed and found to be consistent with the results of previous rodent spaceflight experiments. Investigation was carried out of hindlimb muscles from flight rats killed as close to land as possible so that changes induced by spaceflight and early readaptation to weight bearing could be distinguished from the changes that resulted from the two-day postflight period during Cosmos 1887. Results presented pertain to muscle atrophy and fiber type changes, eccentric contraction-like lesions, microcirculatory changes and interstitial edema, and tissue damage.

Riley, D. A.↗
NASA NTRS1993

Magnetic Actuators and Suspension for Space Vibration Control

The research on microgravity vibration isolation performed at the University of Virginia is summarized. This research on microgravity vibration isolation was focused in three areas: (1) the development of new actuators for use in microgravity isolation; (2) the design of controllers for multiple-degree-of-freedom active isolation; and (3) the construction of a single-degree-of-freedom test rig with umbilicals. Described are the design and testing of a large stroke linear actuator; the conceptual design and analysis of a redundant coarse-fine six-degree-of-freedom actuator; an investigation of the control issues of active microgravity isolation; a methodology for the design of multiple-degree-of-freedom isolation control systems using modern control theory; and the design and testing of a single-degree-of-freedom test rig with umbilicals.

Knospe, Carl R.↗
NASA NTRS1993

Muscle glucose uptake in the rat after suspension with single hindlimb weight bearing

An examination is conducted of the effect of nonweight-bearing conditions, and the systemic influences of simulated microgravity on rat hindlimb muscles. The results obtained suggest that the increases in hindlimb muscle glucose uptake and extracellular space associated with simulated microgravity persist with hindlimb weightbearing, despite the prevention of muscle atrophy. The mechanism (or mechanisms) responsible for these effects are currently unknown.

Stump, Craig S.↗
NASA NTRS1954

Study of Some Dielectric Properties of Suspensions of Magnesium Particles in Mineral Oil

The variation of dielectric constant has been measured as a function of the concentration of magnesium particles; the shape, size, and degree of oxidation of the particles; the temperature; and the frequency of oscillation. The variation of dielectric constant and settling rate was investigated as a function of time. Also investigated were the effects of particle concentration, shape and time on dielectric losses.

Altshuller, Aubrey P↗
NASA NTRS1994

Third order LPF type compensator for flexible rotor suspension

The tuning job of the compensator for levitating flexible rotors supported by active magnetic bearings (AMB) concerns providing a good damping effect to the critical speed modes while avoiding the spillover problem on the instability of higher bending modes. In this paper, an idea for design of the control law of the compensator based on utilizing a third order low pass filter (LPF) is proposed to essentially enable elimination of the spillover instability. According to the proposed design method, good damping effects for the critical speeds are obtained by the usual phase lead/lag function. Stabilization for all of higher bending modes is completed by the additional function of the 3rd order LPF due to its phase lag approaching about -270 degrees in the high frequency domain. This idea is made clear by experiments and simulations.

Matsushita, Osami↗
NASA NTRS1994

Electrokinetic transport of heterogeneous particles in suspension

The Smoluchowski equation for electrophoresis predicts that the electrophoretic velocity of a particle is proportional to its zeta potential but not its size, shape, or orientation. Furthermore, the equation predicts that the rotation rate is identically zero. The Smoluchowski equation fails for heterogeneous particles (i.e., those with nonuniform zeta potentials). Recent theories and experiments show that particles with a dipole moment of zeta potential rotate into alignment with an externally applied electric field. For doublets (particles composed of two spheres) the rotation rate depends on (1) whether the spheres are rigidly rocked or freely rotating, and (2) the gap distance between the spheres. The relative configuration of two coagulated spheres is determined by the colloidal forces of the system. The goal of our research is to use measurements of electrophoretic rotation to determine the gap between two spheres of a colloidal doublet and also to determine whether or not the doublet is rigid.

Velegol, D.↗
NASA NTRS1994

Development of the dynamic motion simulator of 3D micro-gravity with a combined passive/active suspension system

The establishment of those in-orbit operations like 'Rendez-Vous/Docking' and 'Manipulator Berthing' with the assistance of robotics or autonomous control technology, is essential for the near future space programs. In order to study the control methods, develop the flight models, and verify how the system works, we need a tool or a testbed which enables us to simulate mechanically the micro-gravity environment. There have been many attempts to develop the micro-gravity testbeds, but once the simulation goes into the docking and berthing operation that involves mechanical contacts among multi bodies, the requirement becomes critical. A group at the Tokyo Institute of Technology has proposed a method that can simulate the 3D micro-gravity producing a smooth response to the impact phenomena with relatively simple apparatus. Recently the group carried out basic experiments successfully using a prototype hardware model of the testbed. This paper will present our idea of the 3D micro-gravity simulator and report the results of our initial experiments.

Yoshida, Kazuya↗
NASA NTRS1995

Long-Lived Linear-Motion Suspension For Cryogenic Instrument

Mechanism suspends optical component in cryogenic instrument in such way to allow component to translate smoothly along one axis, without vibration. Bearings located outside cooled instrument chamber for longer life. Thermal isolators separate bearings from cryogenic environment inside instrument chamber.

Packard, Douglas T.↗
NASA NTRS1996

Fabrication of Large Domain YBa2Cu3O(x) for Magnetic Suspension Applications

Large domain YBa2Cu3O(x) levitators have been fabricated using a seeded melt processing technique. Depending upon the seed, either a single or five domained sample can be obtained. The grain boundaries separating each domains in the five domain levitator are found to be 90 degrees. Similar levitation forces can be observed for single and five domained samples. After thermal cycling, however, a small decrease in the levitation force of the five domain levitator was observed as a function of thermal cycles while nearly no change in force was observed in the single domain levitator. Finally, it is shown that both, single and five domain YBCO, behave similarly as a function of sample thickness.

Sengupta, S.↗
NASA NTRS1998

Suspension of SiC Powders in Allyhydridopolycarbosilane (AHPCS): Control of Rheology

Inert particulate fillers can be blended with preceramic polymers prior to infiltration of composite preforms to increase pyrolysis yield and decrease shrinkage, thus reducing the number of infiltration/ pyrolysis cycles required for densification. However, particulate filler loadings and concentration of added dispersants necessary to maintain low viscosity (< 0.50 N.s/sq m) slurries vary with the characteristics of the particular AHPCS polymer batch. These batch to batch variations occur with alterations in the synthesis process and method of allyl substitution, which in turn alter polymer structure and molecular weight distribution. A number of different polymer batches were characterized by NMR, GPC and thermal analysis, and the influence of polymer structure on rheology of filled systems determined. When the high molecular weight fraction increased to too great a level, suitably fluid slurries could no longer be attained.

Hurwitz, Frances I.↗
NASA NTRS2002

Nanodiamond in Colloidal Suspension: Electrophoresis; Other Observations

Selective laser extraction has demonstrated that meteoritic diamonds may consist of subpopulations with different optical absorption properties, but it is not clear what makes them optically different. More work is needed to understand the mechanism for selective laser extraction. Additional information is contained in the original extended abstract.

Meshik, A. P.↗
NASA NTRS2004

The Effect of Feeding Purified versus Chow Diet on Bone Changes Produced by Hindlimb Suspension of Female Rats

Spaceflight simulation studies use chow diets while spaceflight studies use a semi-purified &et. To determine whether the differences in these diets would affect the changes in unweighted bone, we compared the effects of purified vs chow diet on bone parameters, urinary calcium, plasma estradiol, and urinary corticosterone (CORT) in sexually mature female Sprague-Dawley rats. Rats fed purified AIN-93G or chow diet were kept ambulatory (AMB) or subjected to a spaceflight simulation model of unweighted hindlimbs (HLS) for 38 days. Body mass of treatment groups was similar although food intake and caloric density of the diets differed. Both HLS diet groups showed similar decreases in bone mineral content and mechanical strength in unweighted femurs compared to AMB (p<0.05). However, femur length was lower (p<0.05) in the chow-fed than AIN-93G fed groups. Urinary calcium excretion was greater in chow than AIN-93G fed rats, consistent with the higher level of calcium in the diet. Plasma estradiol was lower in HLS than in AMB fed AIN-93G, but similar in HLS and AMB chow fed groups. Femur mineral content was related to plasma estradiol (r(sup 2) =0.91, p<0.00l). Urinary CORT excretion was increased during initial HLS and elevated in HLS/chow-fed rats. Diets did not appear to affect the osteopenia induced by unweighting, but effects on bone growth, calcium excretion, plasma estradiol and urinary CORT do not support the view that these diets can by used interchangeably in bone studies.

Tou, Janet↗
NASA NTRS1998

Magnetic Suspension for Dynamic Spin Rig

NASA Lewis Research Center's Dynamic Spin Rig, located in Building 5, Test Cell CW-18, is used to test turbomachinery blades and components by rotating them in a vacuum chamber. A team from Lewis' Machine Dynamics Branch successfully integrated a magnetic bearing and control system into the Dynamic Spin Rig. The magnetic bearing worked very well both to support and shake the shaft. It was demonstrated that the magnetic bearing can transmit more vibrational energy into the shaft and excite some blade modes to larger amplitudes than the existing electromagnetic shakers can.

Johnson, Dexter↗