Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

An Analysis of the Environments of Intense Convective Systems in West Africa in 2003

We investigated the local- and regional-scale thermodynamical and dynamical environments associated with intense convective systems in West Africa during 2003. We identified convective system cases from TRMM microwave imagery, classifying each case by the system minimum 85-GHz brightness temperature and by the estimated elapsed time of propagation from high terrain. The speed of the mid-level jet, the magnitude of the low-level shear, and the surface equivalent potential temperature (theta(sub e)) were greater for the intense cases compared to the non-intense cases, although the differences between the means tended to be small, less than 3K for surface theta(sub e). Hypothesis testing of a series of commonly used intensity prediction metrics resulted in significant results only for low-level metrics such as convective available potential energy and not for any of the mid- or upper-level metrics such as 700-hPa theta(sub e). None of the environmental variables or intensity metrics by themselves or in combination appeared to be reliable direct predictors of intensity. In the regional scale analysis, the majority of intense convective systems occurred in the surface baroclinic zone where surface theta(sub e) exceeded 344 K and the 700-hPa zonal wind speeds were less than -6/ms. Fewer intense cases compared to non-intense cases were associated with African easterly wave troughs. Fewer than 25% of our cases occurred in environments with detectable Saharan dust loads, and the results for intense and non-intense cases were similar. Our results for the regional analysis were consistent with the seasonal movement of the WAM and the intertropical front, regional differences in topography, and AEW energetics.

Nicholls, Stephen D.↗
NASA NTRS1975

Interior noise considerations for powered-lift STOL aircraft

Powered-jet configuration which are under development for use on STOL aircraft involve impingement of the jet engine exhaust onto wing and flap surfaces. The impinging jet produces higher noise levels at lower frequencies than does the jet alone. These higher levels, together with the close proximity of the engine and flap noise sources to the fuselage sidewall, suggest that the noise levels in these aircraft may be high enough to interfere with passenger comfort. To investigate this possibility, interior noise levels were estimated for both an upper surface blown and an externally blown flap configuration. This paper describes the procedure used to estimate the interior noise levels is described these levels are compared with levels on existing jet aircraft and on ground transportation vehicles. These estimates indicate high levels in the STOL aircraft; therefore, areas of possible improvements in technology for control of STOL interior noise are also discussed.

Barton, C. K.↗
NASA NTRS2022

High-Vacuum Triboelectric Charging of Space Materials

In the high-vacuum environment of space and the surface of the moon, static electricity on surfaces lacks the atmospheric dissipation mechanisms found on earth. As a result, the ubiquitous triboelectric charging mechanism can lead to high levels of charge on surfaces. This static charge can result in damage to sensitive devices, interfere with communications, and electrostatic levitation of lunar dust. At the NASA Electrostatics and Surface Physics Laboratory (ESPL), we use different apparatuses and techniques to tribo-charge materials in high-vacuum (10-5 torr), including a tribo-robot and a triboelectric regolith-material stage (TRMS). The tribo-robot is used to rub two materials together, and fieldmeters and electrometers can be used to determine how much charge is on the materials. The TRMS is used to drag different materials onto a bed of lunar simulant. This system is used to characterize how materials may interact with lunar dust using fieldmeters, electrometers, and laser scattering. Using these methods, we are building a database of how different space materials charge when contacting each other at high-vacuum, and how materials triboelectrically interact with the lunar surface.

Joseph Toth↗
NASA NTRS1979

Experimental study of acoustic loads on an upper-surface-blown STOL airplane configuration

Fluctuating pressure levels were measured on the flap and fuselage of an upper-surface-blown jet-flap airplane configuration in a wind tunnel. The model tested had turbofan engines with a bypass ratio of 3 and a thrust rating of 10 kN. Rectangular nozzles were mounted flush with the upper surface at 35 percent of the wing chord. Test parameters were flap deflection angle, jet impingement angle, angle of attack, free-stream velocity, spanwise location of the engine, and jet dynamic pressure. Load levels were high throughout the jet impingement region, with the highest levels (about 159 dB) occurring on the fuselage and near the knee of the flap. The magnitude of the forward-velocity effect appeared to depend upon the ratio of free-stream and jet velocities. Good agreement was obtained between fluctuating pressure spectra measured at jet dynamic pressures of 7 and 22 kPa when the spectra were scaled by nondimensional functions of dynamic pressure, velocity, and the empirical relationship between dynamic pressure and overall fluctuating pressure level.

Willis, C. M.↗
NASA NTRS2000

BOREAS Level-4c AVHRR-LAC Ten-Day Composite Images: Surface Parameters

The BOReal Ecosystem-Atmosphere Study (BOREAS) Staff Science Satellite Data Acquisition Program focused on providing the research teams with the remotely sensed satellite data products they needed to compare and spatially extend point results. Manitoba Remote Sensing Center (MRSC) and BOREAS Information System (BORIS) personnel acquired, processed, and archived data from the Advanced Very High Resolution Radiometer (AVHRR) instruments on the NOAA-11 and -14 satellites. The AVHRR data were acquired by CCRS and were provided to BORIS for use by BOREAS researchers. These AVHRR level-4c data are gridded, 10-day composites of surface parameters produced from sets of single-day images. Temporally, the 10-day compositing periods begin 11-Apr-1994 and end 10-Sep-1994. Spatially, the data cover the entire BOREAS region. The data are stored in binary image format files. Note: Some of the data files on the BOREAS CD-ROMs have been compressed using the Gzip program.

Cihlar, Josef↗
NASA NTRS1992

Genesis of mobile troughs in the upper westerlies

Stability calculations on basic-state velocity profiles representative of the preferred regions for the development of the upper-level disturbances active in Type B cyclogenesis show that conditions in these regions (weak low-level baroclinicity, large low-level static stability, and large surface roughness) are favorable for the growth of baroclinic waves with maximum amplitude near the tropopause. The structure of these waves compares favorably with observations of developing short-wavelength upper-level troughs in the atmosphere. Basic states characteristic of the storm track regions (strong low-level baroclinicity and small surface roughness) favor the development of baroclinic waves with maximum amplitude at the surface. The dynamics of both the surface-trapped and the upper-tropospheric waves can be interpreted concisely using concepts of potential vorticity. Based on these results, a possible mechanism for Type B cyclogenesis in the storm track regions is proposed that involves the propagation and structural modification of baroclinic wave packets in a zonally varying basic flow.

Whitaker, Jeffrey S.↗
NASA NTRS2019

A Control Framework for Autonomous Smart Grids for Space Power Applications

With the National Aeronautics and Space Administration's (NASA) rising interest in lunar surface operations and deep space exploration, there is a growing need to move from traditional ground-based mission operations to more autonomous vehicle level operations. In lunar surface operations, there are periods of time where communications with ground-based mission control could not occur, forcing vehicles and a lunar base to completely operate independent of the ground. For deep space exploration missions, communication latency times increase to greater than 15 minutes making real-time control of critical systems difficult, if not near impossible. These challenges are driving the need for an autonomous power control system that has the capability to manage power and energy. This will ensure that critical loads have the necessary power to support life systems and carry out critical mission objectives. This paper presents a flexible, hierarchical, distributed control methodology that enables autonomous operation of smart grids and can integrate into a higher level autonomous architecture.

Csank, Jeffrey T.↗
NASA NTRS2019

A Control Framework for Autonomous Smart Grids for Space Power Applications

With the National Aeronautics and Space Administration's (NASA) rising interest in lunar surface operations and deep space exploration, there is a growing need to move from traditional ground-based mission operations to more autonomous vehicle level operations. In lunar surface operations, there are periods of time where communications with ground-based mission control could not occur, forcing vehicles and a lunar base to completely operate independent of the ground. For deep space exploration missions, communication latency times increase to greater than 15 minutes making real-time control of critical systems difficult, if not near impossible. These challenges are driving the need for an autonomous power control system that has the capability to manage power and energy. This will ensure that critical loads have the necessary power to support life systems and carry out critical mission objectives. This paper presents a flexible, hierarchical, distributed control methodology that enables autonomous operation of smart grids and can integrate into a higher level autonomous architecture.

Carbone, Marc A.↗
NASA NTRS2001

Simulation of Supersonic Jet Noise with the Adaptation of Overflow CFD Code and Kirchhoff Surface Integral

An acoustic prediction capability for supersonic axisymmetric jets was developed on the basis of OVERFLOW Navier-Stokes CFD (Computational Fluid Dynamics) code of NASA Langley Research Center. Reynolds-averaged turbulent stresses in the flow field are modeled with the aid of Spalart-Allmaras one-equation turbulence model. Appropriate acoustic and outflow boundary conditions were implemented to compute time-dependent acoustic pressure in the nonlinear source-field. Based on the specification of acoustic pressure, its temporal and normal derivatives on the Kirchhoff surface, the near-field and the far-field sound pressure levels are computed via Kirchhoff surface integral, with the Kirchhoff surface chosen to enclose the nonlinear sound source region described by the CFD code. The methods are validated by a comparison of the predictions of sound pressure levels with the available data for an axisymmetric turbulent supersonic (Mach 2) perfectly expanded jet.

Kandula, Max↗
NASA NTRS2002

Simulation of Jet Noise with OVERFLOW CFD Code and Kirchhoff Surface Integral

An acoustic prediction capability for supersonic axisymmetric jets was developed on the basis of OVERFLOW Navier-Stokes CFD (Computational Fluid Dynamics) code of NASA Langley Research Center. Reynolds-averaged turbulent stresses in the flow field are modeled with the aid of Spalart-Allmaras one-equation turbulence model. Appropriate acoustic and outflow boundary conditions were implemented to compute time-dependent acoustic pressure in the nonlinear source-field. Based on the specification of acoustic pressure, its temporal and normal derivatives on the Kirchhoff surface, the near-field and the far-field sound pressure levels are computed via Kirchhoff surface integral, with the Kirchhoff surface chosen to enclose the nonlinear sound source region described by the CFD code. The methods are validated by a comparison of the predictions of sound pressure levels with the available data for an axisymmetric turbulent supersonic (Mach 2) perfectly expanded jet.

Kandula, M.↗
NASA NTRS2006

Advanced Seal Rig Experiments and Analysis

Compliant Seals eg. Brush Seals, Finger Seals: a) 3-5X flow reduction; b) developing higher surface speed, temperature, and pressure levels; c) interference/debris/durability issues. Non Contact Seals eg. Aspirating, Film Riding: a) 5-10X flow reduction but still improving surface speed, temperature, and delta pressure levels; b) limited applications; c) interference issues. Labyrinth Seals still the workhorse seal in gas turbine engines: a) long history of use in compressors, turbines, around bearing compartments; b) cheaper to make than many other seals; c) small improvement x many seals (up to 50*) = big gain in performance/operability; d) well and still investigated by academia & industry; e) with a proper abradable seal land can handle interference.

Paolillo, Roger↗
NASA NTRS2016

Evaluating Secondary Inorganic Aerosols in Three Dimensions

The spatial distribution of aerosols and their chemical composition dictates whether aerosols have a cooling or a warming effect on the climate system. Hence, properly modeling the three-dimensional distribution of aerosols is a crucial step for coherent climate simulations. Since surface measurement networks only give 2-D data, and most satellites supply integrated column information, it is thus important to integrate aircraft measurements in climate model evaluations. In this study, the vertical distribution of secondary inorganic aerosol (i.e., sulfate, ammonium, and nitrate) is evaluated against a collection of 14 AMS flight campaigns and surface measurements from 2000 to 2010 in the USA and Europe. GISS ModelE2 is used with multiple aerosol microphysics (MATRIX, OMA) and thermodynamic (ISORROPIA II, EQSAM) configurations. Our results show that the MATRIX microphysical scheme improves the model performance for sulfate, but that there is a systematic underestimation of ammonium and nitrate over the USA and Europe in all model configurations. In terms of gaseous precursors, nitric acid concentrations are largely underestimated at the surface while overestimated in the higher levels of the model. Heterogeneous reactions on dust surfaces are an important sink for nitric acid, even high in the troposphere. At high altitudes, nitrate formation is calculated to be ammonia limited. The underestimation of ammonium and nitrate in polluted regions is most likely caused by a too simplified treatment of the NH3/NH4(+) partitioning which affects the HNO3/NO3(-) partitioning.

aerosols↗
NASA NTRS2019

Earth Global Reference Atmospheric Model (GRAM) Overview and Comparison to Modern-Era Retrospective Analysis for Research and Applications, Version 2 (MERRA-2)

Earth-GRAM (Earth-Global Reference Atmospheric Model) Overview: Provides monthly statistics at any point in the atmosphere; Monthly, geographic, altitude variation; Current Version - Earth-GRAM 2016, C++; Output Includes - pressure, density, temperature, horizontal and vertical winds, speed of sound, atmospheric constituents; Used by engineering community to create atmospheric dispersions at a rapid runtime; Not a forecast model. MERRA-2 (Modern-Era Retrospective Analysis for Research and Applications, Version 2) Background: Developed by NASA Goddard Modelling and Assimilation Office; Horizontal Resolution: 0.625 degrees by 0.5 degrees longitude-by-latitude grid (NCEP (National Centers for Environmental Prediction) reanalysis I vs. 2.5 degrees by 2.5 degrees currently used in Earth-GRAM); Vertical resolution: 72 model layers or interpolated to 42 pressure levels to 0.1 hectopascals (hPa) (NCEP reanalysis I, surface to 10hPa at 17 pressure levels).

White, Patrick W.↗
NASA NTRS1972

Photographic films as remote sensors for measuring albedos of terrestrial surfaces

To test the feasibility of remotely measuring the albedos of terrestrial surfaces from photographic images, an inquiry was carried out at ground level using several representative common surface targets. Problems of making such measurements with a spectrally selective sensor, such as photographic film, have been compared to previous work utilizing silicon cells. Two photographic approaches have been developed: a multispectral method which utilizes two or three photographic images made through conventional multispectral filters and a single shot method which utilizes the broad spectral sensitivity of black and white infrared film. Sensitometry related to the methods substitutes a Log Albedo scale for the conventional Log Exposure for creating characteristic curves. Certain constraints caused by illumination goemetry are discussed.

Pease, S. R.↗
NASA NTRS2014

Increase of Ozone Concentrations, Its Temperature Sensitivity and the Precursor Factor in South China

Concerns have been raised about the possible connections between the local and regional photochemical problem and global warming. The current study assesses the trend of ozone in Hong Kong and the Pearl River Delta (PRD) in South China and investigates the interannual changes of sensitivity of ozone to air temperature, as well as the trends in regional precursors. Results reveal, at the three monitoring sites from the mid-1990s to 2010, an increase in the mean ozone concentrations from 1.0 to 1.6 microgram m(exp -3) per year. The increase occurred in all seasons, with the highest rate in autumn. This is consistent with trends and temperature anomalies in the region. The increase in the sensitivity of ozone to temperature is clearly evident from the correlation between ozone (OMI [Ozone Monitoring Instrument] column amount) and surface air temperature (from the Atmospheric Infrared Sounder) displayed in the correlation maps for the PRD during the prominently high ozone period of July September. It is observed to have increased from 2005 to 2010, the latter being the hottest year on record globally. To verify this temporal change in sensitivity, the ground-level trends of correlation coefficients/regression slopes are analysed. As expected, results reveal a statistically significant upward trend over a 14-year period (19972010). While the correlation revealed in the correlation maps is in agreement with the corresponding OMI ozone maps when juxtaposed, temperature sensitivity of surface ozone also shows an association with ozone concentration, with R0.5. These characteristics of ozone sensitivity are believed to have adverse implications for the region. As shown by ground measurements and/or satellite analyses, the decrease in nitrogen oxides (NO2) and NO(sub x) in Hong Kong is not statistically significant whileNO2 of thePRD has only very slightly changed. However, carbon dioxide has remarkably declined in the whole region. While these observations concerning precursors do not seem to adequately support an increasing ozone trend, measured surface levels of formaldehyde, a proxy for volatile organic compound (VOC) emissions, have risen significantly in the PRD (20042010). Hence, the reactive VOCs in the PRD are likely to be the main culprit for the increase of ozone, as far as precursors are concerned. Despite the prevailing problem, model simulations suggest prospects for improvement in the future.

South China↗
NASA NTRS1977

Molecular cluster theory of CO chemisorption on a nickel /100/ surface

Self-consistent Hartree-Fock-Slater molecular cluster models for the chemisorption of carbon monoxide on a (100) transition metal surface are presented. Energy levels and charge distribution for the CO:Ni5 cluster in C sub 4v symmetry are obtained, and the variation of binding energies with height of the CO molecule above the surface of nickel is studied in detail. Comparison is made with experimental binding energy spectra and with the multiple-scattering results of Batra and Bagus. The redistribution in energy of free-atom valence levels is studied by means of local-densities-of-states diagrams.

Ellis, D. E.↗