Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stability properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Synthesis and Characterization, Thermal Stability and Magnetic Properties of Metallic Glass Free Layer of Magnetic Tunnel Junctions

Ferromagnetic CoFeSiB and NiFeSiB metallic glasses were produced to study the thermal and magnetic properties of glassy alloys which show the good performance for free layers in the Magnetic tunnel junctions (MTJs). The characters of amorphous materials are compared with crystalline materials composed of CoFe and NiFe. X-ray diffraction pattern was used to confirm the amorphous and crystalline state of melt-spun ribbons. The thermal stability and crystallization processes were investigated by differential scanning calorimeter (DSC). The thermal properties of amorphous alloys represent by the parameters; glass transition temperature (>580 deg. K), crystallization temperature (<830 deg. K), the large supercooled liquid region ({delta}T = Tx-Tg), the reduced glass transition temperature (Trg = Tg/Tm). The alloys exhibit the soft magnet properties of high saturated magnetization (Ms), low coercive force (Hc) and high effective permeability ({mu}e) represented to the hyeteresis loops. The magnetic characters for all alloys are measured by vibrating sample magnetometer (VSM). Amorphous ferromagnetic free layers in MTJs have a lower Ms and a higher anisotropy constant than crystalline layers. The experimental results explain how the metallic glass for free layer performs better than crystal. The good combination of thermal and magnetic properties in the amorphous material indicates the possibility of application as the glassy magnetic material.

36 MATERIALS SCIENCE↗

Computational and Experimental Determination of the Properties, Structure, and Stability of Peptoid Nanosheets and Nanotubes

Peptoids (N-substituted glycines) are a group of highly controllable peptidomimetic polymers. Amphiphilic diblock peptoids have been engineered to assemble crystalline nanospheres, nanofibrils, nanosheets, and nanotubes with biochemical, biomedical, and bioengineering applications. The mechanical properties of peptoid nanoaggregates and their relationship to the emergent self-assembled morphologies have been relatively unexplored and are critical for the rational design of peptoid nanomaterials. In this work, we consider a family of amphiphilic diblock peptoids consisting of a prototypical tube-former (Nbrpm6Nc6, a NH 2 -capped hydrophobic block of six N-((4-bromophenyl)methyl)glycine residues conjugated to a polar NH 3 (CH 2 ) 5 CO tail), a prototypical sheet-former (Nbrpe6Nc6, where the hydrophobic block comprises six N-((4-bromophenyl)ethyl)glycine residues), and an intermediate sequence that forms mixed structures ((NbrpeNbrpm)3Nc6). We combine all-atom molecular dynamics simulations and atomic force microscopy to determine the mechanical properties of the self-assembled 2D crystalline nanosheets and relate these properties to the observed self-assembled morphologies. We find good agreement between our computational predictions and experimental measurements of Young’s modulus of crystalline nanosheets. A computational analysis of the bending modulus along the two axes of the planar crystalline nanosheets reveals bending to be more favorable along the axis in which the peptoids stack by interdigitation of the side chains compared to that in which they form columnar crystals with π-stacked side chains. Here, we construct molecular models of nanotubes of the Nbrpm6Nc6 tube-forming peptoid and predict a stability optimum in good agreement with experimental measurements. A theoretical model of nanotube stability suggests that this optimum is a free energy minimum corresponding to a “Goldilocks” tube radius at which capillary wave fluctuations in the tube wall are minimized.

36 MATERIALS SCIENCE↗

PMR-15/Layered Silicate Nanocomposites For Improved Thermal Stability And Mechanical Properties

Montmorillonite clay was organically modified by co-exchange of an aromatic diamine and a primary alkyl amine. The clay was dispersed into a PMR (Polymerization of Monomer Reactants)-15 matrix and the glass transition temperature and thermal oxidative stability of the resulting nanocomposites were evaluated. PMR-15/ silicate nanocomposites were also investigated as a matrix material for carbon fabric reinforced composites. Dispersion of the organically modified silicate into the PMR-15 matrix enhanced the thermal oxidative stability, the flexural strength, flexural modulus, and interlaminar shear strength of the polymer matrix composite.

Campbell, Sandi↗

Effect of Co on the thermal stability and magnetic properties of AlNiCo 8 alloys

The magnetic properties, microstructure, and reversible temperature coefficient of magnetic flux of Alnico 8 alloys with the different Co and Ti have been investigated in this paper. The Alnico alloys containing 34, 36, 38, and 40 mass percent cobalt were fabricated by the conventional casting method including thermomagnetic treatment. The transmission electron microscopy (TEM) testing shows that there are more α1 phases particles with the diameter of less than 10 nm appearing in the matrix with the increasing of the content of Co and Ti. The thermal stability of Alnico 8 alloys deteriorates with the increasing of the content of Co and Ti, which are caused mainly by the decrease of the degree of particle alignment and particle perfection.

36 MATERIALS SCIENCE↗

Demonstration of Machine Learning-Based Model-Independent Stabilization of Source Properties in Synchrotron Light Sources

Synchrotron light sources, arguably among the most powerful tools of modern scientific discovery, are presently undergoing a major transformation to provide orders of magnitude higher brightness and transverse coherence enabling the most demanding experiments. In these experiments, overall source stability will soon be limited by achievable levels of electron beam size stability, presently on the order of several microns, which is still 1–2 orders of magnitude larger than already demonstrated stability of source position and current. Until now source size stabilization has been achieved through corrections based on a combination of static predetermined physics models and lengthy calibration measurements, periodically repeated to counteract drift in the accelerator and instrumentation. In this paper, we now demonstrate for the first time how the application of machine learning allows for a physics- and model-independent stabilization of source size relying only on previously existing instrumentation. Such feed-forward correction based on a neural network that can be continuously online retrained achieves source size stability as low as 0.2 μm (0.4%) rms, which results in overall source stability approaching the subpercent noise floor of the most sensitive experiments.

43 PARTICLE ACCELERATORS↗

Phase stability and mechanical properties of wire + arc additively manufactured H13 tool steel at elevated temperatures

Wire + arc additive manufacturing (WAAM) is considered an innovative technology that can change the manufacturing landscape in the near future. WAAM offers the benefits of inexpensive initial system setup and a high deposition rate for fabricating medium- and large-sized parts such as die-casting tools. Here, AISI H13 tool steel, a popular die-casting tool metal, is manufactured by cold metal transfer (CMT)-based WAAM and is then comprehensively analyzed for its microstructural and mechanical properties. Location-dependent phase combinations are observed, which could be explained by nonequilibrium thermal cycles that resulted from the layer-by-layer stacking mechanism used in WAAM. In addition, remelting and reheating of the layers reduces welding anomalies (e.g., pores and voids). The metallurgical characteristics of the H13 strongly correlate with the mechanical properties. The combinations of phases at different locations of the additively manufactured part exhibit a periodic microhardness profile. Martensite, Retained Austenite, Ferrite, and Carbide phases are found in combination at different locations of the part based on the part’s temperature distribution during additive deposition. Moreover, the tensile properties at elevated temperatures (23 °C, 300 °C, and 600 °C) are comparable to those from other WAAM and additive manufacturing (AM) processes. The X-ray diffraction results verify that the microstructural stability of the fabricated parts at high temperatures would allow them to be used in high temperatures.

36 MATERIALS SCIENCE↗

The Chemical and Electronic Properties of Stability-Enhanced, Mixed Ir-TiO x Oxygen Evolution Reaction Catalysts

Iridium has emerged as the leading catalyst material for the anodic oxygen evolution reaction (OER) in acidic media. Often, iridium is mixed with more stable materials such as titanium. For these materials, the electronic structure of titanium plays a crucial role since with varying degrees of oxidation titanium transforms to semiconducting or even insulating phases. Yet, the electronic properties of mixed Ir-TiO x catalysts have never been systematically studied. In this study, we correlate the catalytic performance of mixed Ir-TiO x -based OER catalysts with the electronic structure of the surface layers. For this, a thin film material library with a 20-70 at. % Ir (Ir/[Ir + Ti]) compositional gradient was prepared. We used inductively coupled plasma mass spectrometry to test the OER activity and stability of the set of mixed Ir-TiO x catalyst candidate materials. Complementary, Ti L 2,3 - and O K-edge X-ray absorption spectroscopy and depth-dependent X-ray photoelectron spectroscopy measurements were performed to correlate the catalytic performance with the composition and electronic property profiles of these mixed Ir-TiO x OER anode catalysts. The spectroscopic analysis reveals that titanium is present as an intermixed matrix of semiconductive but stable TiO 2 , conductive but less stable titanium-suboxides (TiO x ), and highly conductive but highly unstable metallic Ti(0). The extent of the titanium oxidation strongly depends on the titanium content, with a lower degree of oxidation observed for lower titanium (and thus higher iridium) contents. For an iridium loading of 70 at. %, the respective mixed Ir-TiO x catalyst showed a similar OER activity to that of the pure metallic iridium (1.74 vs 1.59 VRHE, respectively) but with a 71% lower iridium dissolution rate relative to the pure metallic iridium. This demonstrates the stabilization effect of titanium addition while maintaining high OER activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic stability and structural properties of cluster crystals formed by amphiphilic dendrimers

We pursue the goal of finding real-world examples of macromolecular aggregates that form cluster crystals, which have been predicted on the basis of coarse-grained, ultrasoft pair potentials belonging to a particular mathematical class [B. M. Mladek et al., Phys. Rev. Lett. 46, 045701 (2006)]. For this purpose, we examine in detail the phase behavior and structural properties of model amphiphilic dendrimers of the second generation by means of monomer-resolved computer simulations. On augmenting the density of these systems, a fluid comprised of clusters that contain several overlapping and penetrating macromolecules is spontaneously formed. Upon further compression of the system, a transition to multi-occupancy crystals takes place, the thermodynamic stability of which is demonstrated by means of free-energy calculations, and where the FCC is preferred over the BCC-phase. Contrary to predictions for coarse-grained theoretical models in which the particles interact exclusively by effective pair potentials, the internal degrees of freedom of these molecules cause the lattice constant to be density-dependent. Furthermore, the mechanical stability of monodisperse BCC and FCC cluster crystals is restricted to a bounded region in the plane of cluster occupation number versus density. The structural properties of the dendrimers in the dense crystals, including their overall sizes and the distribution of monomers are also thoroughly analyzed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlation between electrical properties and thermodynamic stability of ACoO{sub 3-{delta}} perovskites (A= La, Pr, Nd, Sm, Gd)

For perovskites with the general formula ACoO{sub 3-{delta}} (A = La, Pr, Nd, Sm, and Gd) the influence of the A-site cation on the electrical conductivity, electronic structure, thermodynamic stability, and oxygen stoichiometry was studied. The perovskite oxide powders were produced by a combined citric acid and ethylenediaminetetraacetic acid complexing method. Ceramic specimens sintered at 1100 deg. C in air were single-phase perovskites. With increasing temperature, the electrical conductivity shows three discrete regimes. All compositions show semiconductivity up to a transition temperature of {approx}300 deg. C-450 deg. C and then behave like metallic conductors. The activation energies for the semiconductivity, as well as the transition temperatures to the metallic-like conduction, decrease monotonically with increasing pseudocubic lattice parameters, i.e., with increasing ionic radii of the A cation. This behavior correlates with decreasing oxygen nonstoichiometry and increased thermodynamic stability. The highest conductivity and the lowest activation energy of 0.66 eV were found for LaCoO{sub 3-{delta},} which also had the lowest semiconductor-metal transition temperature at 269 deg. C, the lowest oxygen nonstoichiometry of {delta}= 0.008, and the highest Gibbs free energy change for the decomposition reaction of 42.37 kJ/mol at 850 deg. C. GdCoO{sub 3-{delta}} had the highest oxygen nonstoichiometry with {delta}0.032, a high activation energy of 1.19 eV for the semiconductivity with a high transition temperature at 452 deg. C, and the lowest Gibbs free energy change of 26.54 kJ/mol at 850 deg. C. X-ray absorption spectroscopy data imply an increasing Co low-spin character with decreasing cation radius from La to Gd, while an increase in temperature increases the number of holes or Co 3d bandwidth. This correlates well with the electrical conductivity data.

36 MATERIALS SCIENCE↗

Low-temperature selective laser sintering 3D printing of PEEK-Nylon blends: Impact of thermal post-processing on mechanical properties and thermal stability

Herein, a high-performance polymer (HPP) (polyether ether ketone, PEEK) blended with a commercial low-temperature polymer (polyamide 12, PA-12) was fabricated using a low-temperature selective laser sintering (SLS) 3D printer. Different post-processing heat treatments were implemented after fabrication to tune the thermal and mechanical properties of printed blends. The specific mechanical modulus of the blend was increased up to 79% in comparison to printed PA-12 samples with heat treatment. Additionally, the thermal resistance of the treated blends greatly exceeded the properties observed using PA-12 alone. This research proposes a methodology to fabricate and engineer HPP using desktop SLS printers through a secondary lower melting temperature material and heat treatments.

36 MATERIALS SCIENCE↗

Vanadium Diboride (VB 2 ) Synthesized at High Pressure: Elastic, Mechanical, Electronic, and Magnetic Properties and Thermal Stability

Vanadium diboride (VB 2 ) with an AlB 2 -type structure has been synthesized at 8 GPa and 1700 K in a D-DIA-type multianvil apparatus. The obtained bulk modulus is B 0 = 262(2) GPa with fixed B' = 4.0 for VB 2 via high-pressure X-ray diffraction measurements. Meanwhile, VB 2 has also been demonstrated to possess a high Vickers hardness of 27.2 ± 1.5 GPa, a high thermal stability of 1410 K in air, among the highest for transition-metal borides, and an extremely low resistivity value (41 μΩ cm) at room temperature. Here, results from first-principles calculations regarding the mechanical and electronic properties of VB 2 are largely consistent with the experimental observations and further suggest that VB 2 possesses simultaneously the properties of a hard and refractory ceramic and those of an excellent electric conductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanical and physical properties of plasma-sprayed stabilized zirconia

Physical and mechanical properties were determined for plasma-sprayed MgO- or Y2O3-stabilized ZrO2 thermal barrier coatings. Properties were determined for the ceramic coating in both the freestanding condition and as-bonded to a metal substrate. The properties of the NiCrAlY bond coating were also investigated.

Siemers, P. A.↗

Photocatalytic property and structural stability of CuAl-based layered double hydroxides

Three types of CuMAl layered double hydroxides (LDHs, M=Mg, Zn, Ni) were successfully synthesized by coprecipitation. Powder X-ray diffraction (XRD), inductively coupled plasma atomic emission spectrometry (ICP-AES) and UV–Vis diffuse reflectance spectrum (UV–vis) were used to confirm the formation of as-synthesized solids with good crystal structure. The photocatalytic activity of those LDH materials for CO{sub 2} reduction under visible light was investigated. The experimental results show that CuNiAl-LDHs with narrowest band gap and largest surface areas behave highest efficiency for methanol generation under visible light compared with CuMgAl-LDHs and CuZnAl-LDHs. The CuNiAL-LDH showed high yield for methanol production i.e. 0.210 mmol/g h, which was high efficient. In addition, the influence of the different M{sup 2+} on the structures and stability of the CuMAl-LDHs was also investigated by analyzing the geometric parameters, electronic arrangement, charge populations, hydrogen-bonding, and binding energies by density functional theory (DFT) analysis. The theoretical calculation results show that the chemical stability of LDH materials followed the order of CuMgAl-LDHs>CuZnAl-LDHs>CuNiAl-LDHs, which is just opposite with the photocatalytic activity and band gaps of three materials. - Graphical abstract: The host–guest calculation models and XRD patterns of CuMAl-LDHs: CuMgAl-LDHs (a), CuZnAl-LDHs (b) and CuNiAl-LDHs (c). - Highlights: • Three types of CuMAl layered double hydroxides (LDHs, M=Mg, Zn, Ni) has been synthesized. • CuMgNi shows narrower band gap and more excellent textural properties than other LDHs. • The band gap: CuMgAl<CuZnAl<CuNiAl based on result from UV–vis analysis. • CuMgAl shows the highest stability and lowest photocatalytic activity, while CuNiAl just opposite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of the stability and electronic properties of carbon nanotori synthesized by a high-voltage pulsed discharge in ethanol vapor

An experimental technique for increasing the yield of carbon-nanotube nanotori using the modified arc synthesis method is proposed. New physical knowledge on the systematic features of the interrelation between the properties of nanotori and atomic-network topology are theoretically established for the first time. The experiments are performed based on new technology for synthesizing nanotori on nickel-catalyst particles by a high-voltage pulsed discharge in ethanol vapor and using atomic-force microscopy. Stability is predicted using an original procedure for calculating local atomic stresses. Simulation shows that the zigzag chirality corresponds to the most stable topology of nanotori. Using the tight binding method, it is shown that, depending on the chirality type, nanotori are divided into two classes, i.e., those with metal and semiconductor conductivity.

36 MATERIALS SCIENCE↗

Encumbering the Copper(I)-Diimine Coordination Sphere with a Benzyl Group: Impact on the Stability and Photoredox Properties

Copper(I)-bisdiimine complexes, [Cu(NN) 2 ] + (where NN represents a diimine such as phenanthroline or bipyridine derivatives), are considered promising photosensitizers for various photochemical applications. However, their effectiveness is subject to several key challenges. In particular, controlling steric strain around the copper(I) center by introducing appropriate substituents (R) at the α-position of the nitrogen atoms is crucial for optimizing the excited-state properties of the complex. In brief, increasing the size of R leads to longer emission lifetimes and higher quantum yields. Additionally, the energy of the singlet excited state rises with increasing steric bulk, enhancing photoinduced reactivity. However, excessive steric strain from bulky substituents can significantly destabilize the coordination sphere. To balance complex stability with increased steric bulk around the metal center, we have developed two novel non-symmetrical ligands featuring branched alkyl chains and benzyl groups at the α-position of the nitrogen atoms. Here, our findings demonstrate that intramolecular π-stacking interactions between the benzyl group and the opposing phenanthroline ligand contribute to stabilizing the coordination sphere. Furthermore, the flexibility of the benzyl group reinforces the tetrahedral geometry around copper(I), resulting in an increased singlet excitedstate energy compared to benchmark complexes. Notably, we show that this enhancement in excited-state energy translates into greater excited-state reactivity.

Copper(I)↗

Stability and Conservation properties of Hermite-based approximations of the Vlasov-Poisson System

Spectral approximation based on Hermite-Fourier expansion of the Vlasov-Poisson model for a collisionless plasma in the electro-static limit is provided by adding high-order artificial collision operators of Lenard-Bernstein type. These differential operators are suitably designed in order to preserve the physically-meaningful invariants (number of particles, momentum, energy). In view of time-discretization, stability results in appropriate norms are presented. In this study, necessary conditions link the magnitude of the artificial collision term, the number of spectral modes of the discretization, as well as the time-step. The analysis, carried out in full for the Hermite discretization of a simple linear problem in one-dimension, is then partly extended to cover the complete nonlinear Vlasov-Poisson model.

97 MATHEMATICS AND COMPUTING↗

Thermal stability and photoconductive properties of photosensors with an alternating multilayer structure of amorphous Se and As{sub x}Se{sub 1−x}

In this study, we fabricated a-Se based photosensors with an alternating multilayer structure of a-Se and As{sub x}Se{sub 1−x} by rotational thermal evaporation deposition. During the deposition of the amorphous As{sub x}Se{sub 1−x} layers, As diffuses into the underlying a-Se component layers, thereby improving the thermal stability of the multilayer photosensor and thus increasing the breakdown electric field. Although the As doping introduces carrier traps in the a-Se layers, the multilayer photosensors demonstrate an effective quantum efficiency comparable to the single-layered a-Se sensor under the blue light illumination but are with a lower dark current density by two orders of magnitude. In addition to the top As{sub x}Se{sub 1−x} layer being functioning as an electron blocking layer, carrier traps present in the multilayer structure may decrease the drift mobility of charge carriers and disturb electric field distribution in the photosensors, thereby suppressing the dark current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗