Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Conditions for stable operation of solid oxide electrolysis cells: oxygen electrode effects

Solid oxide electrolysis cells (SOECs) convert renewable electricity to fuels with efficiency substantially higher than other electrolysis technologies. However, questions remain regarding degradation mechanisms that limit SOEC long-term stability. One of the key degradation mechanisms is oxygen electrode delamination; although prior studies have improved the understanding of this mechanism, it is still difficult to predict how degradation depends on SOEC materials and operating conditions, i.e., temperature, voltage, and current density. Here we present a study aimed at developing a quantitative understanding of oxygen electrode delamination. Experimentally, a life test study of symmetric and full cells with yttria-stabilized zirconia (YSZ) electrolytes and Gd-doped ceria (GDC) barrier layers was done with three different perovskite oxygen electrode materials. Fracture was observed at the perovskite–GDC interface above a critical current density and below a critical operating temperature. A theory is presented that combines a calculation of the effective oxygen pressure across the electrolyte with an estimation of the pressure required for fracture. Fracture is correctly predicted for a critical oxygen partial pressure of ~7200 atm and an associated electrode overpotential of ~0.2 V, occurring at the electrode/GDC interface because of the relatively low perovskite fracture toughness. As a result, damage at the GDC/YSZ interface was also observed in some cases and explained by a peak in the oxygen pressure at this interface.

30 DIRECT ENERGY CONVERSION↗

Tuning electrochemical and transport processes to achieve extreme performance and efficiency in solid oxide cells

Solid oxide cells (SOCs) have important applications as fuel cells and electrolyzers. The application for storage of renewable electricity is also becoming increasingly relevant; however, it is difficult to meet stringent area-specific resistance (ASR) and long-term stability targets needed to achieve required efficiency and cost. Here we show a new SOC that utilizes a very thin Gd-doped ceria (GDC)/yttria-stabilized zirconia (YSZ) bi-layer electrolyte, Ni–YSZ cell support with enhanced porosity, and electrode surface modification using PrO x and GDC nanocatalysts to achieve unprecedented low ASR values < 0.1 Ω cm 2 , fuel cell power density ~3 W cm –2 , and electrolysis current density ~4 A cm –2 at 800 °C. Besides this exceptionally high performance, fuel cell and electrolysis life tests suggest very promising stability in fuel cell and steam electrolysis modes. Furthermore, electrochemical impedance spectroscopy analysis done using a novel impedance subtraction method shows how rate-limiting electrode processes are impacted by the new SOC materials and design.

25 ENERGY STORAGE↗

Impact of particle loading and phase coupling on gas–solid flow dynamics: A case study of a two-phase, gas–solid flow in an annular pipe

The present study is devoted to a two-phase, gas–solid flow in an annular pipe (hollow cylinder) at an elevated pressure of 15 bars and moderate Reynolds number of circa 6000. The influence of the particle loading, the interaction between the phases, and turbulence dispersion on the flow dynamics is systematically studied by means of computational fluid dynamics simulations, employing the Ansys FLUENT commercial package. The cases with a particle volumetric fraction of 1.2% are referred to as “high particle loading,” and those with 0.13% are denoted as “low particle loading.” The following cases are investigated: (1) pure gas flow; (2) low particle loading two-phase flow with one-way coupling and with turbulence dispersion; (3) low particle loading two-phase flow with two-way coupling but without turbulence dispersion; (4) low particle loading two-phase flow with two-way coupling and with turbulence dispersion; (5) high particle loading two-phase flow with one-way coupling and with turbulence dispersion; (6) high particle loading two-phase flow with two-way coupling but without turbulence dispersion; and (7) high particle loading two-phase flow with two-way coupling and with turbulence dispersion. Additionally, the boundary layer is found to grow without fluctuations of the turbulent kinetic energy (TKE) for cases 1, 2, and 5. For case 4, the TKE fluctuations have been identified, although they appear to be less substantial than those in cases 6 and 7. The authors attribute the semi-chaotic nature of the TKE fluctuations to the particle loading and two-way coupling. In addition, the onset and development of the flow instability have been observed at a random axial distance in cases 4, 6, and 7. Such instability is also attributed to the two-way coupling with turbulence dispersion in the flow. It is concluded that the particle loading, one-way, or two-way coupling between the phases, and the turbulence dispersion models significantly influence the development of the flow dynamics with the same inlet and boundary conditions. Consequently, it is not a trivial question, which result a user should trust. The present computational results inspire to perform verification as well as experimental validation of the simulations, so the simulation results can subsequently be used with confidence for design analysis.

42 ENGINEERING↗

The roles of kinematic constraint and diffusion in non-equilibrium solid state phase transformations of Ti-6Al-4V

A solid state phase transformation of Ti-6Al-4V was studied using high speed in situ x-ray diffraction measurements made during rapid cooling of a cold metal transfer arc weld bead deposited onto a water cooled substrate. Analysis of body centered cubic (BCC) and hexagonal close packed (HCP) lattices revealed an abrupt, nonlinear shift in the lattice parameters of both phases just after the HCP phase had nucleated. Postmortem transmission electron microscopy confirmed that V diffusion was mostly suppressed during cooling. Together, these results indicate that at this cooling rate of approximately 10 4 K/s, which is representative of cooling rates of many additive manufacturing and welding processes, kinematic coherency of the BCC–HCP interfaces gives rise to the anomalous lattice expansion and contraction behaviors of both phases during the initial nucleation and growth stages of (mostly) martensitic transformation from BCC to HCP; the role of diffusion in such lattice anomalies is shown to be minimal.

36 MATERIALS SCIENCE↗

SPIN TEMPERATURE OF WATER MOLECULES DESORBED FROM THE SURFACES OF AMORPHOUS SOLID WATER, VAPOR-DEPOSITED AND PRODUCED FROM PHOTOLYSIS OF A CH{sub 4}/O{sub 2} SOLID MIXTURE

The nuclear-spin temperature of molecules observed in interstellar space or cometary coma is an important key to understanding physical and chemical histories of the molecules. The present Letter reports measurements of nuclear-spin states and rotational temperatures of thermally desorbed H{sub 2}O molecules from amorphous solid water (ASW) by combining temperature-programmed desorption and resonance-enhanced multiphoton ionization (REMPI). REMPI spectra of desorbed H{sub 2}O molecules were measured at {approx}150 K from vapor-deposited ASW at 8 K. The nuclear-spin temperature of desorbed H{sub 2}O molecules exhibits almost an upper limit to the ortho-to-para ratio of close to 3. No discernible change was observed in the H{sub 2}O REMPI spectrum, neither after leaving the deposited ASW for 9 days in a vacuum chamber at 8 K, nor in the presence of O{sub 2} molecules, nor upon exposure of ASW to vacuum-ultraviolet (VUV) photons. Desorbed H{sub 2}O molecules were also investigated from ASW produced by VUV irradiation of a CH{sub 4}/O{sub 2} mixture at 8 K. The resulting H{sub 2}O spectrum showed a high nuclear-spin temperature. These results suggest that the nuclear-spin temperatures of gaseous H{sub 2}O molecules thermally desorbed from ice do not necessarily reflect the surface temperature at which H{sub 2}O molecules condensed or formed under some laboratory conditions. We discuss the possibility of nuclear-spin conversion of H{sub 2}O in water ice. The present study advocates the importance of further studies to give an interpretation of nuclear-spin temperatures of molecules observed in interstellar space or cometary coma.

74 ATOMIC AND MOLECULAR PHYSICS↗

Orientation dependence of temporal and spectral properties of high-order harmonics in solids [Orientation dependence of high-harmonic temporal and spectral properties in solids]

We investigate the connection between crystal symmetry and temporal and spectral properties of high-order harmonics in solids. We calculate the orientation-dependent harmonic spectrum driven by an intense, linearly polarized infrared laser field, using a momentum-space description of the generation process in terms of strong-field-driven electron dynamics on the band structure. We show that the orientation dependence of both the spectral yield and the subcycle time profile of the harmonic radiation can be understood in terms of the coupling strengths and relative curvatures of the valence band and the low-lying conduction bands. In particular, we show that in some systems this gives rise to a rapid shift of a quarter optical cycle in the timing of harmonics in the secondary plateau as the crystal is rotated relative to the laser polarization. Here, we address recent experimental results in MgO and show that the observed change in orientation dependence for the highest harmonics can be interpreted in the momentum space picture in terms of the contributions of several different conduction bands.

74 ATOMIC AND MOLECULAR PHYSICS↗

X-ray diffraction study of laser-driven solid-state diffusional mixing and new phase formation in Ni-Pt multilayers [X-ray diffraction study of laser-driven solid-state diffusional mixing and new phase formation]

An in situ optical pump and x-ray probe technique has been utilized to study photoinitiated solid-state diffusion in a Ni-Pt multilayer system. Hard x-ray diffraction has been used to follow the systematic growth of the NiPt alloy as a function of laser intensity and total energy deposited. It is observed that new phase growth can be driven in as little as one laser pulse, and that repeated photoexcitation can completely convert the entire multilayer structure into a single metallic alloy. In conclusion, the data suggest that lattice strain relaxation takes place prior to atomic diffusion and the formation of a NiPt alloy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-contrast laser acceleration of relativistic electrons in solid cone-wire targets

Optimization of electron coupling into small solid angles is of extreme importance to applications, such as Fast Ignition, that require maximum electron energy deposition within a small volume. To optimize this coupling, we use the ultra-high-contrast Trident laser, which remains below intensity of 10 11 W/cm 2 until < 0.1 ns before the main pulse, while still attaining high-energy, 75 J, and peak intensity of 5 x 10 19 W/cm 2 . Using a cone-wire target, we find that the coupling into the 40 μm diameter wire is increased by a factor of 2.7x over the low-contrast Titan laser at similar peak intensity. Full-scale simulations are used to model the laser interaction and quantitatively reproduce the experimental results. These show that increase in coupling is due to both a closer interaction, as well as the reduction of laser filamentation and self-focusing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Necessary and sufficient conditions for resonant mixing of plane waves in elastic solids with quadratic nonlinearity

This paper studies the interactions of two plane waves in elastic solids with quadratic nonlinearity. In particular, the necessary and sufficient conditions for resonant mixing of two plane waves are derived. It is shown that the conventional resonance condition for resonant mixing of plane waves is only a necessary condition, not sufficient. Based on the newly derived necessary and sufficient conditions, resonant mixing of various types of plane waves are investigated and specific conditions for generating a resonant mixed wave are obtained for each case. These results are useful for developing nonlinear ultrasonic nondestructive evaluation techniques using the wave mixing method.

Gao, Xiang↗