SEARCH · Engineering Papers

Results for “smoothing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

NASA NTRS1978

The forward scattering of microwave solar radiation from a water surface

The forward scattering of microwave solar radiation from both smooth and rough water surfaces is computed. The smooth surface is assumed specular, and the rough surface is represented by a two-scale surface, for which two small-scale perturbation parameters, 0.10 and 0.25, are considered. The contribution of the scattered sunlight to the antenna temperature is found using the scalar approximation, and the results are compared with radiometer measurements. The overall agreement is good, but in some cases the smooth-surface measurements are higher than the computations. This discrepancy possibly indicates an absolute calibration error or a slight misalignment of the antennas' boresights. The computations for the two perturbation parameters bracket the rough-surface measurements except when the sun's mirror image is far removed from the boresight direction. The small disagreement in this case may be due to a peaked large-scale slope distribution.

Wentz, F. J.↗

NASA NTRS1979

Low cost cylindrical converter for measuring lead efficiency

A low cost cylindrical thermionic converter has been designed, fabricated, and tested for use in a NASA-JPL program to directly measure converter lead efficiencies using various electrode materials and surfaces. Efficiency measurements are made using input emitter heater power, output power at the leads, and calculated values of the parasitic losses that would not be present in the application configuration. This information can be used to predict the performance characteristics of the advanced converters currently under development. A series of five converters has been tested. Both structured and smooth molybdenum collectors have been used. Emitters included smooth molybdenum, smooth rhenium, and microstructured rhenium. Cesium pressure families of current-voltage curves are presented for emitter temperatures of 1600, 1700, and 1800 K, along with measured efficiencies as a function of converter current densities for each temperature.

Hatch, G. L.↗

NASA NTRS1981

Electron reflection and secondary emission characteristics of sputter-textured pyrolytic graphite surfaces

Measurements are presented of secondary electron emission and reflected primary electron characteristics of sputter-textured pyrolitic graphite surfaces with microstructures of various sizes and densities, made with an Auger cylindrical mirror analyzer in a high-vacuum chamber at pressures below 1.33 x 10 to the -7th N/sq m (10 to the -9th torr). A dense, tall, thin, spire-like microstructure, obtained at ion energies of 1000 eV and ion current densities of 5 mA/sq cm, is the most effective. The secondary electron emission from such a surface is lower than that of soot, whose secondary emission is among the lowest of any material. At a primary electron energy of 1000 eV, the secondary electron emission yield of smooth CU is about 350% greater than the lowest value obtained for sputter-textured pyrolitic graphite. The reflected primary electron index of smooth Cu is a factor of 80 greater. If the secondary electron emission yield is reduced to 0.3, which is possible with sputter-textured pyrolitic graphite, the traveling wave tube collector efficiency could be improved by as much as 4% over that for smooth copper.

Wintucky, E. G.↗

NASA NTRS1981

Command profile for Galileo scan platform control

A recursive command profile is developed for the control of a two-degree-of-freedom scan platform mounted on a flexible structure. Perfect sensors and actuators are assumed for development and testing, and structural vibrations are minimized by actuator torque commands following a smooth torque-time profile. The integral of the smooth torque profile, the rate profile, is recursively generated by a piecewise constant second derivation, and the torque applied by the closk actuator is divided into three components. Results show that the smooth platform motion in response to the command profiles is what the Galileo control systems needs to avoid stator structural vibrations. Position, rate and acceleration profiles are also presented, and the resulting motion of the scan platform in response to command profiles is illustrated.

Man, G. K.↗

NASA NTRS1981

Apparatus for damping operator induced oscillations of a controlled system

Flight control-related apparatus for damping operator induced oscillations of a controlled system responding to an operator controlled signal is described. The device utilizes a lag-lead filter for frequency and amplitude estimation of the control input, and a rectification and smoothing filter for producing a signal proportional to the absolute value of the frequency and amplitude estimate for use in suppression of the control system output signal. In one embodiment, this is accomplished by computing a correction signal in a correction generating section. In a second embodiment, a second rectification and smoothing filter produces a signal proportional to the absolute value of the controlled input signal. A ratio of the outputs of the first and second rectification and smoothing filters is then used in a generator to generate a gain factor k sub q for the control system to reduce the gain of the output signal of the control system, thereby to provide a damped control output signal without rate limiting the controlled element.

Edwards, J. W.↗

NASA NTRS1981

Optimal spatial filtering and transfer function for SAR ocean wave spectra

The impulse response of the SAR system is not a delta function and the spectra represent the product of the underlying image spectrum with the transform of the impulse response which must be removed. A digitally computed spectrum of SEASAT imagery of the Atlantic Ocean east of Cape Hatteras was smoothed with a 5 x 5 convolution filter and the trend was sampled in a direction normal to the predominant wave direction. This yielded a transform of a noise-like process. The smoothed value of this trend is the transform of the impulse response. This trend is fit with either a second- or fourth-order polynomial which is then used to correct the entire spectrum. A 16 x 16 smoothing of the spectrum shows the presence of two distinct swells. Correction of the effects of speckle is effected by the subtraction of a bias from the spectrum.

Beal, R. C.↗

NASA NTRS1982

Feasibility of SPF/DB titanium sandwich for LFC wings

The feasibility of fabricating SPF/DB titanium structures of sufficient smoothness to be used for laminar flow wing surfaces was demonstrated. Two methods of fabricating panels which meet the surface smoothness criteria were demonstrated. The first consists of superplasticity forming/diffusion bonding a panel using steel dies, then machining the surface to the required flatness and finish after forming. This approach, however, was estimated to be more costly than the second approach, in which the panel is formed against ceramic platens which produce the desired surface smoothness without subsequent finishing. Four panels were fabricated, and their surface quality was evaluated. The specified criteria for waviness compared with actual measured values on the panels is shown. The acceptable surface quality as well as feasibility of the laminar flow control surface design, in which separate strips incorporating the boundary layer bleed provisions are bonded into slots on the surface, was also demonstrated.

Mcquilkin, F. T.↗

NASA NTRS1982

Synthesis of offset dual reflector antennas transforming a given feed illumination pattern into a specified aperture distribution

The problem of transforming a given primary feed pattern into a desired aperture field distribution through two reflections by an offset dual reflector system is investigated using the concepts of geometrical optics. A numerically rigorous solution for the reflector surfaces is developed which realizes an exact aperture phase distribution and an aperture amplitude distribution that is accurate to within an arbitrarily small numerical tolerance. However, this procedure does not always yield a smooth solution, i.e., the reflector surfaces thus realized may not be continuous or their slopes may vary too rapidly. In the event of nonexistence of a numerically rigorous smooth solution, an approximate solution that enforces the smoothness of the reflector surfaces can be obtained. In the approximate solution, only the requirement for the aperture amplitude distribution is relaxed, and the condition on the aperture phase distribution is continued to be satisfied exactly.

Mittra, R.↗

NASA NTRS1982

Regolith maturation on the earth and the moon with an example from Apollo 15

Petrographic data on twelve Apollo 15 surface samples and on twelve samples from the double drive tube 15010/011 are presented in the form of triangular AML (agglutinate-monomineralic fragments-lithic fragments) plots. The triangular AML plots for different grain sizes show smoothly varying contour lines only for the solids derived mainly from mare basalts. These contour lines are interpreted as lines of isomaturity. The AML plots with isomature contours are somewhat similar to QFR (quartz-feldspar-rock fragments) triangular plots used for terrestrial clastic sediments. Both kinds of plots are sensitive to maturity and both may be used to predict evolution paths. Soils from predominantly highland areas and from other mixed terrains at Apollo 15 sites do not make smooth contours on AML diagrams. By analogy with QFR diagrams, the lack of smooth contours may be due to mixed source rock families, or to recent mixing, or both.

Basu, A.↗

NASA NTRS1983

Forming Mirrors on Composite Materials

Smooth coatings deposited on hard-to-polish substrates. Lightweight mirror, leaning against conventional glass mirror, consists of metallic relective layer on substrate coated with polyester resin. Smooth surface of polyester resin made by covering freshly applied resin with piece of smooth glass coated with release agent.

Gauldin, R. E.↗

NASA NTRS1982

Turbulent boundary layer over solid and porous surfaces with small roughness

The wind tunnel models and instrumentation used as well as data reduction and error analysis techniques employed are described for an experimental study conducted to measure directly skin friction and obtain profiles of mean velocity, axial and normal turbulence intensity, and Reynolds stress in the untripped boundary on a large diameter axisymmetric body. Results are given for such a body with a (1) smooth, solid surface; (2) a sandpaper roughened, solid surface; (3) a sintered metal, porous surface; (4) a ""smooth'' performated titanium surface; (5) a rough, solid surface made of fine diffusion bonded screening; and (6) a rough, porous surface made of the same screening. The roughness values were in low range (k+ 5 to 7) just above what is normally considered ""hydraulically smooth''. Measurements were taken at several axial locations and tow or normal stream freestream velocities, 45.1 m/sec and 53.5 m/sec.

Kong, F. Y.↗

NASA NTRS1983

An experimental study of changes in the structure of a turbulent boundary layer due to surface geometry changes

This investigation attempts to observe changes in the flow structure of a nominally zero pressure gradient turbulent boundary layer by altering the surface of a smooth plate with small triangular riblets oriented in the direction of flow and protruding just above the viscous sublayer. Hot-wire measurements show a reduction in the local skin friction over the riblet valleys by about 40% compared to the smooth surface near the end of the plate. Local skin friction increases by about 10% over the riblet peaks. Results showing the effects of the riblets on the mean, root-mean-square and skewness factor distributions of the streamwise velocity are presented. The mean profile displays characteristics similar to those of drag reducing additives; the streamwise turbulence intensity is reduced by approximately 10-15% near the surface by the riblets; the skewness factor distribution is virtually unchanged. A comparison of results from an application of the VITA 'burst' detection technique to smooth and riblet surface data is also presented although the results are rather inconclusive. Flow visualization of 'bursting' over both surfaces, while dramatically revealing the structure, reveals little difference resulting from the presence of the riblet.

Source record↗

NASA NTRS1984

Delta wings with shock-free cross flow

In order to have a high level of maneuverability, supersonic delta wings should have a cross flow that is free of embedded shock waves. The conical cross flow sonic surface differs from that of plane transonic flow in many aspects. Well-known properties such as the monotone law are not true for conical cross flow sonic surfaces. By using a local analysis of the cross flow sonic line, relevant conditions for smooth cross flow are obtained. A technique to artificially construct a smooth sonic surface and an efficient numerical method to calculate the flow field are used to obtain cones with smooth cross flow.

Sritharan, S. S.↗

NASA NTRS1984

A comparative look at sunspot cycles

On the basis of cycles 8 through 20, spanning about 143 years, observations of sunspot number, smoothed sunspot number, and their temporal properties were used to compute means, standard deviations, ranges, and frequency of occurrence histograms for a number of sunspot cycle parameters. The resultant schematic sunspot cycle was contrasted with the mean sunspot cycle, obtained by averaging smoothed sunspot number as a function of time, tying all cycles (8 through 20) to their minimum occurence date. A relatively good approximation of the time variation of smoothed sunspot number for a given cycle is possible if sunspot cycles are regarded in terms of being either HIGH- or LOW-R(MAX) cycles or LONG- or SHORT-PERIOD cycles, especially the latter. Linear regression analyses were performed comparing late cycle parameters with early cycle parameters and solar cycle number. The early occurring cycle parameters can be used to estimate later occurring cycle parameters with relatively good success, based on cycle 21 as an example. The sunspot cycle record clearly shows that the trend for both R(MIN) and R(MAX) was toward decreasing value between cycles 8 through 14 and toward increasing value between cycles 14 through 20. Linear regression equations were also obtained for several measures of solar activity.

Wilson, R. M.↗

NASA NTRS1985

Delta wings with shock-free cross flow

Sritharan, S. S.↗

NASA NTRS1985

Test results for round-hole-pattern damper seals - Optimum configurations and dimensions for maximum net damping

Test results are presented for nine annular seals which use a roughened stator and smooth rotor to yield an increase in net damping as compared to conventional smooth-rotor/smooth-stator annular seals. Round-hole roughness patterns are used to achieve the desired stator roughness. The results presented demonstrate that the maximum net damping is achieved by (a) a hole pattern which takes up about 34 percent of the surface area, and (b) hole depths which are about three times the radial clearances. When compared to a smooth seal, the optimum configuration increases net damping by 37 percent, while reducing leakage by 46 percent and direct stiffness by 23 percent. Comparisons of experiment to theory are generally satisfactory for hole-patterns near the optimum area ratio of 34 percent. However, the theory is unsatisfactory for seals which have a substantially higher percentage of the surface area taken up by holes.

Childs, D. W.↗

NASA NTRS1987

An experimental and theoretical comparison of rotordynamic coefficients for sawtooth-pattern damper seals

A brief review of the annular seal theory as related to rotordynamics for liquid seals is presented. Also included is an overview of Childs and Kim's current theory for calculating empirical turbulence coefficients and predicting stiffness and damping coefficients for surface roughened damper seals. The designation sawtooth-pattern refers to a seal stator with a roughness pattern whose cross section normal to the seal axis resembles a sawtooth with the teeth directed against the flow. The net stiffness and damping coefficients for the eleven seals are compared to each other, a smooth seal, and the optimum-configuration damper seal previously tested. The experimental force coefficients, the net damping, and the net stiffness coefficients for four of the sawtooth seals are compared to the predictions of Childs and Kim's analysis. The sawtooth-pattern seal had less net damping than the hole-pattern seal but more than the smooth seal. The stiffness was comparable to the hole-pattern. Both the sawtooth and hole-pattern seals leaked less than the smooth seal, while the sawtooth-pattern seal with maximum damping leaked more than the hole-pattern seal. The theoretical predictions compared relatively poorly to the experimental results obtained for the rotordynamic coefficients of the seals investigation.

Nolan, Steven Anthony↗

NASA NTRS1988

A comparison of experimental and theoretical results for labyrinth gas seals with honeycomb stators

Experimental results for the rotordynamic stiffness and damping coefficients of a labyrinth -rotor honeycomb-stator seal are presented. The coefficients are compared to the coefficients of a labyrinth-rotor smooth-stator seal having the same geometry. The coefficients are compared to analytical results from a two-control-volume compressible flow model. The experimental results show that the honeycomb stator configuration is more stable than the smooth stator configuration at low rotor speeds. At high rotor speeds and low clearance, the smooth stator seal is more stable. The theoretical model predicts the cross-coupled stiffness of the honeycomb stator seal correctly within 25 percent of measured values. The model provides accurate predictions of direct damping for large clearance seals. Overall, the model does not perform as well for low clearance seals as for high clearance seals.

Hawkins, Lawrence Allen↗