Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “retrievals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Validation of the Cloud_CCI (Cloud Climate Change Initiative) cloud products in the Arctic

The role of clouds in the Arctic radiation budget is not well understood. Ground-based and airborne measurements provide valuable data to test and improve our understanding. However, the ground-based measurements are intrinsically sparse, and the airborne observations are snapshots in time and space. Passive remote sensing measurements from satellite sensors offer high spatial coverage and an evolving time series, having lengths potentially of decades. However, detecting clouds by passive satellite remote sensing sensors is challenging over the Arctic because of the brightness of snow and ice in the ultraviolet and visible spectral regions and because of the small brightness temperature contrast to the surface. Consequently, the quality of the resulting cloud data products needs to be assessed quantitatively. In this study, we validate the cloud data products retrieved from the Advanced Very High Resolution Radiometer (AVHRR) post meridiem (PM) data from the polar-orbiting NOAA-19 satellite and compare them with those derived from the ground-based instruments during the sunlit months. The AVHRR cloud data products by the European Space Agency (ESA) Cloud Climate Change Initiative (Cloud_CCI) project uses the observations in the visible and IR bands to determine cloud properties. The ground-based measurements from four high-latitude sites have been selected for this investigation: Hyytiälä (61.84°N, 24.29°E), North Slope of Alaska (NSA; 71.32°N, 156.61°W), Ny-Ålesund (Ny-Å; 78.92°N, 11.93°E), and Summit (72.59°N, 38.42°W). The liquid water path (LWP) ground-based data are retrieved from microwave radiometers, while the cloud top height (CTH) has been determined from the integrated lidar–radar measurements. The quality of the satellite products, cloud mask and cloud optical depth (COD), has been assessed using data from NSA, whereas LWP and CTH have been investigated over Hyytiälä, NSA, Ny-Å, and Summit.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

The Cloud-resolving model Radar SIMulator (CR-SIM) Version 3.3: description and applications of a virtual observatory

Ground-based observatories use multi-sensor observations to characterize cloud and precipitation properties. One of the challenges is how to design strategies to best use these observations to understand these properties and evaluate weather and climate models. This paper introduces the Cloud resolving model Radar SIMulator (CR-SIM), which uses output from high-resolution cloud resolving models (CRMs) to emulate multi-wavelength, zenith-pointing, and scanning radar observables and multi-sensor (radar and lidar) products. CR-SIM allows direct comparison between an atmospheric model simulation and remote-sensing products using a forward-modeling framework consistent with the microphysical assumptions used in the atmospheric model. CR-SIM has the flexibility to easily incorporate additional microphysical modules, such as microphysical schemes and scattering calculations, and expand the applications to simulate multi-sensor retrieval products. In this paper, we present several applications of CR-SIM for evaluating the representativeness of cloud microphysics and dynamics in a CRM, quantifying uncertainties in radar-lidar integrated cloud products and multi-Doppler wind retrievals, and optimizing radar sampling strategy using observing system simulation experiments. These applications demonstrate the application of CR-SIM as a virtual observatory operator on high-resolution model output for a consistent comparison between model results and observations to aid interpretation of the differences and improve understanding of the representativeness errors due to the sampling limitations of the ground-based measurements. CR-SIM is licensed under the GNU GPL package and both the software and the user guide are publicly available to the scientific community.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Wake-Resolving Acoustic Tomography: Advances through Numerical Covariance Methods

Acoustic tomography offers path-integrated measurements of atmospheric velocity and temperature fluctuations with high spatial resolution. Classical implementations of time-dependent stochastic inversion rely on homogeneous, isotropic covariance models that are poorly suited to the anisotropic structure of wind turbine wakes. By directly estimating heterogeneous covariances from large-eddy simulations (LESs) into the time-dependent stochastic inversion operator, we relax implicit assumptions in the analytical models used historically. Retrievals using these LES-informed models improve agreement with true fields in variance, turbulent kinetic energy, and spectral content compared to analytical and precursor-based covariance models. The results indicate that LES-informed covariance models can enhance the accuracy of acoustic tomography retrievals in complex, anisotropic flows such as wind turbine wakes in some cases and highlight instances where analytical models still offer competitive performance, despite their simplifying assumptions.

17 WIND ENERGY↗
DOE OSTI2020

US East Coast synthetic aperture radar wind atlas for offshore wind energy

We present the first synthetic aperture radar (SAR) offshore wind atlas of the US East Coast from Georgia to the Canadian border. Images from RADARSAT-1, Envisat, and Sentinel-1A/B are processed to wind maps using the geophysical model function (GMF) CMOD5.N. Extensive comparisons with 6008 collocated buoy observations of the wind speed reveal that biases of the individual systems range from -0.8 to 0.6 m s -1 . Unbiased wind retrievals are crucial for producing an accurate wind atlas, and intercalibration of the SAR observations is therefore applied. Wind retrievals from the intercalibrated SAR observations show biases in the range of to -0.2 to 0.0 m s -1 , while at the same time improving the root-mean-squared error from 1.67 to 1.46 m s -1 . The intercalibrated SAR observations are, for the first time, aggregated to create a wind atlas at the height 10 m a.s.l. (above sea level). The SAR wind atlas is used as a reference to study wind resources derived from the Wind Integration National Dataset Toolkit (WTK), which is based on 7 years of modelling output from the Weather Research and Forecasting (WRF) model. Comparisons focus on the spatial variation in wind resources and show that model outputs lead to lower coastal wind speed gradients than those derived from SAR. Areas designated for offshore wind development by the Bureau of Ocean Energy Management are investigated in more detail; the wind resources in terms of the mean wind speed show spatial variations within each designated area between 0.3 and 0.5 m s -1 for SAR and less than 0.2m s -1 for the WTK. Our findings indicate that wind speed gradients and variations might be underestimated in mesoscale model outputs along the US East Coast.

17 WIND ENERGY↗
DOE OSTI2020

CSAPR2 CMAC 2.0 level c1 data.

Raw data from ARM precipitation radars must be corrected for atmospheric phenomena and instrument characteristics (e.g., attenuation, clutter) to retrieve precipitation properties. The Corrected Moments in Antenna Coordinates Version 2 (CMAC2) value-added product (VAP) is a set of algorithms and code that does such corrections, and it also retrieves precipitation quantities from the radar measurements. Similar to the X-SAPR radars at the ARM main site, C-SAPR2 radar data also needs corrections and improvements. CMAC 2.0 has been updated to work with the ARM C-SAPR 2 radar. Data and fields that have been processed to: correct for velocity aliasing, unfold and generate a cross-polarimetric phase difference that is monotonically increasing, removing impulses caused by non-uniform beam filling and phase shift on backscatter, recalculate specific differential phase using a 20-point Sobel filter on the aforementioned phase, correct for liquid path attenuation using the polarimetric signals, estimate rainfall rates at the gate using the specific attenuation. In addition, CMAC writes the data out into a community-standard format netCDF File using the CF/Radial conventions. The data are therefore compatible with new and existing National Center for Atmospheric Research (NCAR) tools such as RadXConvert for converting to a variety of popular file formats.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Cloud Shortwave Optical Properties

The data set consists of calibrated zenith shortwave spectral radiances (400-950 nm and 940-1665 nm) and cloud optical depth (COD) retrievals every 2 seconds. The field of view is 0.5 degree. Retrievals of cloud droplet effective radius and thermodynamic phase are currently experimental and done offline. Effective radius and phase are not in this data set.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

microbasew.c1

The continuous baseline microphysical retrieval, Wacr-based (MICROBASEW) VAP is a baseline retrieval of cloud microphysical properties. MICROBASEW uses a combination of observations from the W-band, zenith pointing radar (WACR), the ceilometer, the micropulse lidar (MPL), the microwave radiometer (MWR) and a merged thermodynamic profile (MERGED SOUNDING) VAP in order to determine the profiles of liquid/ice water content (L/IWC), liquid/ice cloud particle effective radius (re) and cloud fraction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

microbase.c1

MICROBASE is a baseline retrieval of cloud microphysical properties. It uses a combination of observations from the cloud radar, ceilometer, micropulse lidar, microwave radiometer, and balloon-borne radiosonde soundings in order to produce instantaneous vertical profiles of cloud liquid water content (LWC), cloud ice water content (IWC), liquid cloud particle effective radius (LIQRE), and ice cloud particle effective radius (ICERE). Uncertainites are also produced by the VAP. The inputs are by the following VAPs: Active Remote Sensing of Clouds (ARSCL) Merged Sounding (MERGESONDE) Microwave Radiometer Retrievals (MWRRET) The output are daily files.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Tansey_MICRE_AAD_lidar_cloud_and_precip_phase_V2.0_20160406_201601120

This data file contains retrievals of cloud-base and below-cloud precipitation phase base for the MICRE campaign. The retrieved base is largely based on AAD depolarization lidar measurements. BOM cloud radar (BASTA), ARM ceilometer, and U. Canterbury ceilometer data are used to locate cloud base and below-cloud precipitation. Details on the algorithm and analysis of results are given in Tansey et al. 2023 (submitted DOI: 10.22541/essoar.168394768.89694625/v1). The data is limited to the period 20160406 to 201601120 during which both AAD lidar data and BoM radar data was collected.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Observing Arctic Sea Ice

Our understanding of Arctic sea ice and its wide-ranging influence is deeply rooted in observation. Advancing technologies have profoundly improved our ability to observe Arctic sea ice, document its processes and properties, and describe atmosphere-ice-ocean interactions with unprecedented detail. Yet, our progress toward better understanding the Arctic sea ice system is mired by the stark disparities between observations that tend to be siloed by method, scientific discipline, and application. This article presents a review and philosophical design for observing sea ice and accelerating our understanding of the Arctic sea ice system. We give a brief history of Arctic sea ice observations and showcase the 2018 melt season within the context of five observational themes: spatial heterogeneity, temporal variability, cross-disciplinary science, scalability, and retrieval uncertainty. We synthesize buoy data, optical imagery, satellite retrievals, and airborne measurements to demonstrate how disparate data sets can be woven together to transcend observational-scale issues. The results show that there are limitations to interpreting any single data set alone. However, many of these limitations can be surmounted by combining observations that cross spatial and temporal scales. We conclude the article with pathways toward coordinating across observational platforms in order to: (1) optimize the scientific, operational, and community return on observational investments, and (2) facilitate a richer understanding of Arctic sea ice and its role in the climate system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

PSU-BSEC Doppler Lidar Processed Scans

This data repository includes the processed vertically staring measurements (stare files) and the angled scans (profile files) necessary to calculate horizontal winds retrieved by the Pennsylvania State University (PSU) Doppler Lidar as a part of the Baltimore Social-Environmental Collaborative Urban Integrated Field Laboratory (BSEC UIFL). The PSU Doppler Lidar measures aerosol backscatter intensity (m-1 sr-1), signal-to-noise ratio, and radial velocity (i.e., vertical velocity in the case of stare files, units: m/s) at approximately 1 Hz temporal resolution and 30 m spatial resolution. Within the "stare_data" subdirectory there exist example figures of all retrieved data. For further information, please email Nicholas Prince, nec5299@psu.edu.

Air Quality↗
DOE OSTI2025

Projected Urban Morphology of the Los Angeles Area by the Year 2100

This dataset provides projections of urban building morphologies for the Los Angeles urban area at 30-meter spatial resolution. It contains 192 raster files that detail two primary building attributes: building footprint fractions (ranging from 0 to 1) and average building heights (ranging from 0 to 75 meters). The projections account for a wide range of future pathways, covering two Shared Socioeconomic Pathway (SSP) scenarios (SSP3 and SSP5), two population scenarios, two developed land intensification scenarios, and four distinct levels of intensification. The dataset was created using dual Generative Adversarial Networks (GANs) trained on 2015 land cover and building properties from the National Land Cover Database (NLCD) and Model America datasets. Supporting information on the dataset has been described in the LAUrbanAreaMorphologyProjections2100_README.txt file.

Pandey, Bhartendu↗
DOE OSTI2020

High performance context switching for virtualized FPGA accelerators

A hardware context manager in a field-programmable gate array (FPGA) device includes configuration logic configured to program one or more programming regions in the FPGA device based on configuration data for implementing a target configuration of the one or more programming regions. Context management logic in the hardware context manager is coupled with the configuration logic and saves a first context corresponding to the target configuration by retrieving first state information from the set of one or more programming regions, where the first state information is generated based on the target configuration, and storing the retrieved first state information in a context memory. The context management logic restores the first context by transferring the first state information from the context memory to the one or more programming regions, and causing the configuration logic to program the one or more programming regions based on the configuration data.

42 ENGINEERING↗
DOE OSTI2022

Calibration method for a spectral computerized tomography system

A calibration method for an x-ray computerized tomography system and a method of tomographic reconstruction are provided. The calibration method includes steps of measuring at least one point spread function (PSF) at each of a plurality of points, compressing each PSF, and in one or more storing operations, storing the compressed PSFs in a computer-accessible storage medium. The PSF measurements are made in a grid of calibration points in a field of view (FOV) of the system. In the measuring step, an absorber is positioned at each of the calibration points, and an x-ray projection is taken at least once at each of those absorber positions. In the method of tomographic image reconstruction, projection data from an x-ray tomographic projection system are input to an iterative image reconstruction algorithm. The algorithm retrieves and utilizes a priori system information (APSI) The APSI comprises comprising point spread functions (PSFs) of all voxels in a voxelization of the field of view that are compressed in the form of vectors of parameters. For utilization, each retrieved vector of parameters is decompressed so as to generate a discretized PSF.

Jimenez, Jr., Edward Steven↗
DOE OSTI2022

Sharing tuples across independent coordination namespace systems

A system and method for federating a tuple storage database across multiple coordinated namespace (CNS) extended memory storage systems allowing the sharing of tuples and tuple data across independent systems. The method provides a federation service for multiple coordination namespace systems. The method retrieves a tuple from connected independent CNS systems wherein a local CNS Controller sends a read request to the local gatekeeper to retrieve a first tuple and creates a local pending remote record. The local gatekeeper at a requesting node sends a broadcast query to a plurality of remote gatekeepers for the tuple and Remote gatekeepers at remote nodes query in its local CNS for the tuple. The Local gatekeeper process at the requesting node receives results from a plurality of remote gatekeepers for the said tuple and selects one remote gatekeeper to receive the requested tuple and broadcasts a read for tuple data with selected gatekeeper.

Jacob, Philip↗
DOE OSTI2023

Large Language Models (LLMs) for Energy Systems Research

The integration of Large Language Models (LLMs) in energy systems research promises transformative results, as demonstrated in this work, particularly in the realms of information retrieval and legal document analysis. We have developed a chat-based interface, specifically designed to query an extensive corpus of technical reports from the National Renewable Energy Laboratory (NREL). This interface capitalizes on the natural language processing capabilities of LLMs, providing future consumers of NREL research with a user-friendly platform to access and extract valuable information from technical documents, thus enhancing the dissemination of research to the public. In addition to information retrieval, we have employed LLMs to extract renewable energy siting ordinances from a variety of legal documents, a task traditionally driven by significant human labor. This automated extraction not only supports the ongoing development of the high-impact NREL siting ordinance database but also ensures the database's accuracy and comprehensiveness. Crucially, we have augmented the performance of LLMs through the integration of a decision tree framework, resulting in a substantial improvement in extraction accuracy. Comparative analysis with manual efforts has shown that this approach not only rivals but also significantly surpasses human accuracy, heralding increased reliability in legal document analysis for energy systems research. To democratize access to these advancements and foster collaborative research, we introduce the "Energy Language Model" (ELM), an open-source software package. ELM encapsulates the methodologies and tools developed in this work, providing researchers and practitioners with a robust toolkit to conduct similar analyses within their respective domains. Through these contributions, this work underscores the immense potential of LLMs in revolutionizing energy systems research, improving accuracy, efficiency, and accessibility in the field.

automation↗
DOE OSTI2023

Identifying location of data granules in global virtual address space

An approach is disclosed that identifies a home node of a data granule. The process is performed by an information handling system (a local node) that retrieves a global virtual address directory. The global virtual address directory maps shared virtual addresses to a number nodes that includes the local node with one of the nodes being the home node. The shared virtual addresses correspond to a plurality of memory addresses that are stored in a shared virtual memory that is shared amongst the plurality of nodes. The approach receives a selected shared virtual address, retrieves, from the global virtual address directory, the home node associated with the selected shared virtual address, and accesses the data granule corresponding to the selected shared virtual address from the home node.

Johns, Charles R.↗
DOE OSTI2023

A Ceph S3 Object Data Store for HEP

We present a novel data format design that obviates the need for data tiers by storing individual event data products in column objects. The objects are stored and retrieved through Ceph S3 technology, with a layout designed to minimize metadata volume and maximize data processing parallelism. Performance benchmarks of data storage and retrieval are presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗