Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “relaxation methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Time and temperature dependent modulus of pyrrone and polyimide moldings

A method is presented by which the modulus obtained from a stress relaxation test can be used to estimate the modulus which would be obtained from a sonic vibration test. The method was applied to stress relaxation, sonic vibration, and high speed stress-strain data which was obtained on a flexible epoxy. The modulus as measured by the three test methods was identical for identical test times, and a change of test temperature was equivalent to a shift in the logarithmic time scale. An estimate was then made of the dynamic modulus of moldings of two Pyrrones and two polyimides, using stress relaxation data and the method of analysis which was developed for the epoxy. Over the common temperature range (350 to 500 K) in which data from both types of tests were available, the estimated dynamic modulus value differed by only a few percent from the measured value. As a result, it is concluded that, over the 500 to 700 K temperature range, the estimated dynamic modulus values are accurate.

Lander, L. L.↗

Scalable Simulation of Pressure Gradient-Driven Transport of Rarefied Gases in Complex Permeable Media Using Lattice Boltzmann Method

Accurate representations of slip and transitional flow regimes present a challenge in the simulation of rarefied gas flow in confined systems with complex geometries. In these regimes, continuum-based formulations may not capture the physics correctly. This work considers a regularized multi-relaxation time lattice Boltzmann (LB) method with mixed Maxwellian diffusive and halfway bounce-back wall boundary treatments to capture flow at high Kn. The simulation results are validated against atomistic simulation results from the literature. We examine the convergence behavior of LB for confined systems as a function of inlet and outlet treatments, complexity of the geometry, and magnitude of pressure gradient and show that convergence is sensitive to all three. The inlet and outlet boundary treatments considered in this work include periodic, pressure, and a generalized periodic boundary condition. Compared to periodic and pressure treatments, simulations of complex domains using a generalized boundary treatment conserve mass but require more iterations to converge. Convergence behavior in complex domains improves at higher magnitudes of pressure gradient across the computational domain, and lowering the porosity deteriorates the convergence behavior for complex domains.

42 ENGINEERING↗

New Spectral Method for Halo Particle Definition in Intense Mis-matched Beams

An advanced spectral analysis of a mis-matched charged particle beam propagating through a periodic focusing transport lattice is utilized in particle-in-cell (PIC) simulations. It is found that the betatron frequency distribution function of a mismatched space-charge-dominated beam has a bump-on-tail structure attributed to the beam halo particles. Based on this observation, a new spectral method for halo particle definition is proposed that provides the opportunity to carry out a quantitative analysis of halo particle production by a beam mismatch. In addition, it is shown that the spectral analysis of the mismatch relaxation process provides important insights into the emittance growth attributed to the halo formation and the core relaxation processes. Finally, the spectral method is applied to the problem of space-charge transport limits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Slater transition methods for core-level electron binding energies

Methods for computing core-level ionization energies using self-consistent field (SCF) calculations are evaluated and benchmarked. These include a “full core hole” (or “ΔSCF”) approach that fully accounts for orbital relaxation upon ionization, but also methods based on Slater’s transition concept in which the binding energy is estimated from an orbital energy level that is obtained from a fractional-occupancy SCF calculation. A generalization that uses two different fractional-occupancy SCF calculations is also considered. The best of the Slater-type methods afford mean errors of 0.3–0.4 eV with respect to experiment for a dataset of K-shell ionization energies, a level of accuracy that is competitive with more expensive many-body techniques. An empirical shifting procedure with one adjustable parameter reduces the average error below 0.2 eV. Here, this shifted Slater transition method is a simple and practical way to compute core-level binding energies using only initial-state Kohn–Sham eigenvalues. It requires no more computational effort than ΔSCF and may be especially useful for simulating transient x-ray experiments where core-level spectroscopy is used to probe an excited electronic state, for which the ΔSCF approach requires a tedious state-by-state calculation of the spectrum. As an example, we use Slater-type methods to model x-ray emission spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hyperpolarized relaxometry based nuclear T 1 noise spectroscopy in diamond

The origins of spin lifetimes in quantum systems is a matter of importance in several areas of quantum information. Spectrally mapping spin relaxation processes provides insight into their origin and motivates methods to mitigate them. In this paper, we map nuclear relaxation in a prototypical system of 13 C nuclei in diamond coupled to Nitrogen Vacancy (NV) centers over a wide field range (1 mT-7 T). Nuclear hyperpolarization through optically pumped NV electrons allows signal measurement savings exceeding million-fold over conventional methods. Through a systematic study with varying substitutional electron (P1 center) and 13 C concentrations, we identify the operational relaxation channels for the nuclei at different fields as well as the dominant role played by 13 C coupling to the interacting P1 electronic spin bath. These results motivate quantum control techniques for dissipation engineering to boost spin lifetimes in diamond, with applications including engineered quantum memories and hyperpolarized 13 C imaging.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vibrational relaxation of diatomic molecules in solids at low temperatures

The application of a hemiquantal method to the specific problem of the vibrational relaxation of a diatomic molecule embedded in a one dimensional lattice is presented. The vectorization of a CYBER 205 algorithm which integrates the 1,000 to 10,000 simultaneous hemiquantal differential equations is examined with comments on optimization. Results of the simulations are briefly discussed.

Halcomb, L. L.↗

A spectral method for halo particle definition in intense mismatched beams

An advanced spectral analysis of a mismatched charged particle beam propagating through a periodic focusing transport lattice is utilized in particle-in-cell (PIC) simulations. It is found that the betatron frequency distribution function of a mismatched space-charge-dominated beam has a bump-on-tail structure attributed to the beam halo particles. Based on this observation, a new spectral method for halo particle definition is proposed that provides the opportunity to carry out a quantitative analysis of halo particle production by a beam mismatch. In addition, it is shown that the spectral analysis of the mismatch relaxation process provides important insights into the emittance growth attributed to the halo formation and the core relaxation processes. Finally, the spectral method is applied to the problem of space-charge transport limits.

43 PARTICLE ACCELERATORS↗

Three dimensional hypersonic flow simulations with the CSCM implicit upwind Navier-Stokes method

The Bardina and Lombard (1985) three-dimensional CSCM Navier-Stokes method is presently extended to the simulation of complex hypersonic reentry vehicle external flows at angle of attack. The robust stability of the method derives from the combination of conservative implicit upwind flux difference splitting with a three-dimensional diagonally-dominant approximate factorization and relaxation scheme and characteristic-based implicit boundary approximations. The method's efficiency derives from an implicit symmetric Gauss-Seidel 'method of planes' relaxation scheme with alternating directional space marching sweeps along the flow coordinate direction.

Bardina, Jorge↗

In situ magnetic compensation for potassium spin-exchange relaxation-free magnetometer considering probe beam pumping effect

A novel method to compensate the residual magnetic field for an atomic magnetometer consisting of two perpendicular beams of polarizations was demonstrated in this paper. The method can realize magnetic compensation in the case where the pumping rate of the probe beam cannot be ignored. In the experiment, the probe beam is always linearly polarized, whereas, the probe beam contains a residual circular component due to the imperfection of the polarizer, which leads to the pumping effect of the probe beam. A simulation of the probe beam's optical rotation and pumping rate was demonstrated. At the optimized points, the wavelength of the probe beam was optimized to achieve the largest optical rotation. Although, there is a small circular component in the linearly polarized probe beam, the pumping rate of the probe beam was non-negligible at the optimized wavelength which if ignored would lead to inaccuracies in the magnetic field compensation. Therefore, the dynamic equation of spin evolution was solved by considering the pumping effect of the probe beam. Based on the quasi-static solution, a novel magnetic compensation method was proposed, which contains two main steps: (1) the non-pumping compensation and (2) the sequence compensation with a very specific sequence. After these two main steps, a three-axis in situ magnetic compensation was achieved. The compensation method was suitable to design closed-loop spin-exchange relaxation-free magnetometer. By a combination of the magnetic compensation and the optimization, the magnetic field sensitivity was approximately 4 fT/Hz{sup 1/2}, which was mainly dominated by the noise of the magnetic shield.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Heat of segregation of single substitutional impurities

The method of Bozzolo, Ferrante and Smith (BFS) is applied for the calculation of the heat of segregation of single substitutional impurities in fcc metals. A simple equation for predicting the heat of segregation is derived for the rigid case (no atomic relaxations). The results of including atomic relaxation using a Monte Carlo method are also presented and the results compared with a number of experimental and theoretical results.

Bozzolo, Guillermo↗

Spin relaxation and linear-in-electric-field frequency shift in an arbitrary, time-independent magnetic field

A method is presented to calculate the spin relaxation times T 1 , T 2 due to a nonuniform magnetic field, and the linear-in-electric-field precession frequency shift δω E when an electric field is present, in the diffusion approximation for spins confined to a rectangular cell. It is found that the rectangular cell geometry admits of a general result for T 1 , T 2 , and δω E

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A novel technique for response function determination of shear sensitive cholesteric liquid crystals for boundary layer investigations

A description of the design and setup of an experimental technique for measurement of the response function in shear sensitive liquid crystals has been reported. Utilizing the selective reflection characteristics of cholesteric liquid crystals, the method is capable of measuring the delay, rise, and relaxation times in response to a given dynamic shear stress as a function of the wavelength of the incident light. Application of a step input shear stress results in a liquid crystal time response that can be described as consisting of an initial delay, a shear induced helix deformation, and a relaxation to the initial state through diffusion processes. The method has been used for quantitative calibration of a shear sensitive liquid crystal by observing the peak in reflected light intensity, at a given wavelength, as a function of the shear stress.

Parmar, D. S.↗

An improved guess for the variational calculation of charge-transfer excitations in large systems

Ab initio quantum-chemical methods that perform well for computing the electronic ground state are not straightforwardly transferable to electronically excited states, particularly in large molecular systems. Wave function theory offers high accuracy, but is often prohibitively expensive. Methods based on time-dependent density functional theory (TD-DFT) are crucially sensitive to the chosen exchange-correlation functional (XCF) parameterization, and system-specific tuning protocols were therefore proposed to address the method's robustness. Methods based on the variational relaxation of the excited-state electron density showcased promising results for the calculation of charge-transfer excitations, but the complex shape of the electronic hypersurface makes convergence to a specific excited state much more difficult than for the ground state when standard variational techniques are applied. We address the latter aspect by providing suitable initial guesses, which we obtain by two separate constrained algorithms. Combined with the squared-gradient minimization algorithm for all-electrons relaxation in a freeze-and-release scheme (FRZ-SGM), we demonstrate that orbital-optimized density functional theory (OO-DFT) calculations can reliably converge to the charge-transfer states of interest even for large molecular systems. We test the FRZ-SGM method on a phenothiazine-anthraquinone CT excitation in a supramolecular Pd(II) coordination cage complex as a function of the cage conformation. This compound has been studied experimentally prior to our work. We compare this freeze-and-release scheme to two XCF reparameterizations, which were recently proposed as low-cost TD-DFT-based alternatives to variational methods. Two dye-semiconductor complexes, which were previously investigated in the context of photovoltaic applications, serve as a second example to investigate the convergence and stability of the FRZ-SGM approach. Our results demonstrate that FRZ-SGM provides reliable convergence for charge-transfer excited states and avoids variational collapse to lower-lying electronic states, whereas time-dependent DFT calculations with an adequate tuning procedure for the range-separation parameter provide a computationally efficient initial estimate of the corresponding energies, with a computational cost comparable to that of configuration-interaction singles (CIS) calculations.

Bogo, Nicola↗

Two-Level System Spectroscopy from Correlated Multilevel Relaxation in Superconducting Qubits

Transmon qubits are a cornerstone of modern superconducting quantum computing platforms. Temporal fluctuations of energy relaxation in these qubits are widely attributed to microscopic two-level systems (TLSs) in device dielectrics and interfaces, yet isolating individual defects typically relies on tuning the qubit or the TLS into resonance. We demonstrate a novel spectroscopy method for fixed-frequency transmons based on multilevel relaxation: repeated preparation of the second excited state and simultaneous $T_1$ extraction of the first and second excited states reveals characteristic correlations in the decay rates of adjacent transitions. From these correlations we identify one or more dominant TLSs and reconstruct their frequency drift over time. Remarkably, we find that TLSs detuned by $\gtrsim 100\,\mathrm{MHz}$ from the qubit transition can still significantly influence relaxation. The proposed method provides a powerful tool for TLS spectroscopy without the need to tune the transmon frequency, either via a flux-tunable inductor or AC-Stark shifts.

Roy, Tanay [Fermilab] (ORCID:000000019442862X)↗

A Semi-Implicit Lattice Method for Simulating Flow

We propose a new semi-implicit lattice numerical method for modeling fluid flow that depends only on local primitive variable information (density, pressure, velocity) and not on relaxed upstream distribution function values. This method has the potential for reducing parallel communication and permitting larger time steps compared to the lattice Boltzmann method. The lid-driven cavity is modeled to demonstrate the accuracy of the method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Identification of important error fields in stellarators using the Hessian matrix method

Error fields are predominantly attributed to inevitable coil imperfections. Controlling error fields during coil fabrication and assembly is crucial for stellarators. Excessively tight coil tolerance increases time and cost, and, in part, led to the cancellation of the National Compact Stellarator Experiment and delay of W7-X. In this paper, we improve the recently proposed Hessian matrix method to rapidly identify important coil deviations. Two of the most common figures of merit, magnetic island size and quasi-symmetry, are analytically differentiated over coil parameters. By extracting the eigenvectors of the Hessian matrix, we can directly identify sensitive coil deviations in the order of the eigenvalues. The new method is applied to the upcoming Chinese First Quasi-axisymmetric Stellarator configuration. Important perturbations that enlarge n/m = 4/11 islands and deteriorate quasi-axisymmetry of the magnetic field are successfully determined. The results suggest each modular coil should have separate tolerance and some certain perturbation combinations will produce significant error fields. By relaxing unnecessary coil tolerance, this method will hopefully lead to a substantial reduction in time and cost.

79 ASTRONOMY AND ASTROPHYSICS↗

Numerical modeling of a vortex stabilized arcjet thruster

A numerical method to solve the equations governing a vortex stabilized arcjet thruster is being developed. The model will allow the effects of swirling flow and geometry on arcjet thruster performance to be determined. The propellant flow equations, i.e., the axisymmetric, thin layer, Navier-Stokes equations, are solved using a Gauss-Siedel line-relaxation procedure. An implicit FTCS method is used to solve the electromagnetic field equations. A grid generation scheme was developed for an arbitrary arcjet geometry. The model will allow the radial and axial components of velocity and current distributions to be determined from a region upstream of the cathode, through the constrictor, to the exit plane of the nozzle.

Keith, Theo G., Jr.↗