Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “rectifiers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

516 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

High temperature experiments using programmable transistor array

Temperature and radiation tolerant electronics, as well as long life survivability are key capabilities required for future NASA missions. Current approaches to electronics for extreme environments focus on component level robustness and hardening. Compensation techniques such as bias cancellation circuitry have also been employed. However, current technology can only ensure very limited lifetime in extreme environments. This paper presents a novel approach, based on evolvable hardware technology, which allows adaptive in-situ circuit redesign/reconfiguration during operation in extreme environments. This technology would complement material/device advancements and increase the mission capability to survive harsh environments. The approach is demonstrated on a mixed-signal programmable chip, which recovers functionality until 280oC. We show in this paper the functionality recovery at high temperatures for a variety of circuits, including rectifiers, amplifiers and filters.

Duong, Vu↗
NASA NTRS2019

Atmospheric Correction of Satellite Ocean-Color Imagery During the PACE Era

The Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) mission will carry into space the Ocean Color Instrument (OCI), a spectrometer measuring at 5 nm spectral resolution in the ultraviolet (UV) to near infrared (NIR) with additional spectral bands in the shortwave infrared (SWIR), and two multi-angle polarimeters that will overlap the OCI spectral range and spatial coverage, i. e., the Spectrometer for Planetary Exploration (SPEXone) and the Hyper-Angular Rainbow Polarimeter (HARP2). These instruments, especially when used in synergy, have great potential for improving estimates of water reflectance in the post Earth Observing System (EOS) era. Extending the top-of-atmosphere (TOA) observations to the UV, where aerosol absorption is effective, adding spectral bands in the SWIR, where even the most turbid waters are black and sensitivity to the aerosol coarse mode is higher than at shorter wavelengths, and measuring in the oxygen A-band to estimate aerosol altitude will enable greater accuracy in atmospheric correction for ocean color science. The multi-angular and polarized measurements, sensitive to aerosol properties (e.g., size distribution, index of refraction), can further help to identify or constrain the aerosol model, or to retrieve directly water reflectance. Algorithms that exploit the new capabilities are presented, and their ability to improve accuracy is discussed. They embrace a modern, adapted heritage two-step algorithm and alternative schemes (deterministic, statistical) that aim at inverting the TOA signal in a single step. These schemes, by the nature of their construction, their robustness, their generalization properties, and their ability to associate uncertainties, are expected to become the new standard in the future. A strategy for atmospheric correction is presented that ensures continuity and consistency with past and present ocean-color missions while enabling full exploitation of the new dimensions and possibilities. Despite the major improvements anticipated with the PACE instruments, gaps/issues remain to be filled/tackled. They include dealing properly with whitecaps, taking into account Earth-curvature effects, correcting for adjacency effects, accounting for the coupling between scattering and absorption, modeling accurately water reflectance, and acquiring a sufficiently representative dataset of water reflectance in the UV to SWIR. Dedicated efforts, experimental and theoretical, are in order to gather the necessary information and rectify inadequacies. Ideas and solutions are put forward to address the unresolved issues. Thanks to its design and characteristics, the PACE mission will mark the beginning of a new era of unprecedented accuracy in ocean-color radiometry from space.

ocean color↗
NASA NTRS2022

A Discussion of the Failure of a Quad Diode Module and Efforts to Assure the Flight Spares

In 2019 the International Space Station (ISS) experienced an on on-orbit failure that affected 1 of 28 Battery Charge Discharge Units (BCDUs). Telemetry pointed to a short circuit failure of a Power Rectifier Quad Diode Module. Astronauts removed the failed unit from service which was then returned to Earth for failure analysis. The failure analysis confirmed that the quad diode module had failed short circuit. The investigation identified silver dendrites had grown on the insulated, sloped edge of the mesa semiconductor die of the failed diode and also a 2nd diode in the same quad diode module. Voids between the diode’s protective encapsulating ring and the die provided space within which dendrites were able to form and cause catastrophic failure. The NASA Engineering & Safety Center (NESC) convened a EEE Parts Sub-Team to investigate root cause and to assist with risk assessment for all of the flight diode modules (4 distinct production lots) and the flight spares (from a 5th lot). Analysis of the original diode manufacturer’s read and record screening test data identified some lots which contained diodes with parametric instabilities that could signal conditions suited for silver dendrite formation. Computed Tomography (CT) X-ray screening inspection was performed on flight spare modules to identify diodes that do not exhibit voids between the edge of die and encapsulating ring as a mitigation against dendrite formation.

Jay Brusse↗
NASA NTRSDate not supplied

Where IMERG Goes Next: Version 08 and Beyond

With the Version 07 (V07) Integrated Multi-satellitE Retrievals for GPM (IMERG) algorithm finalized and production initiated, the focus turns to enhancements for Version 08. These include innovations not included in V07 due to time constraints, plus issues revealed by the initial V07 products. One high priority is to evaluate and revise the schemes in V07 that rectify temporal artifacts caused by the time interpolation that fills the gaps between the various passive microwave (PMW) sensor overpasses. A second priority is to improve the homogeneity between the TRMM and GPM eras by characterizing differences between the two eras, determining the causes of these differences, and applying corrections as feasible, perhaps by enforcing spatial scale consistency (an overarching issue). Certainly, we must account for GPROF and the Combined Radar-Radiometer Algorithm converting to Machine Learning schemes in V08. Other priority topics include additional automated quality control for artifacts in the IR brightness temperatures and PMW precipitation fields, revisions to the specification algorithm for the probability of liquid precipitation, and accommodating new PMW sensors, which include the next generation of small-sats. We also consider the post-V08 landscape; the final GPM reprocessing will be restricted to fixing known code or algorithmic errors. Nonetheless, there are several data sources on the horizon to consider, including more small-sat PMW radiometers, AVHRR-based precipitation estimates (most useful in high latitudes), and the ISCCP-Next Generation and GEO-Ring projects that could provide easy access to multiple geosynchronous satellite channels and enable significantly improved algorithms compared to GEO-IR alone.

George J. Huffman↗
NASA NTRSDate not supplied

A Concept of Operations for Power Beaming of Electric Air Vehicles

A concept of operations is presented for power beaming of microwaves to extend battery charge of an electric air vehicle. Critical aspects of airspace operations and power beam charging are addressed. Three classes of electric Vertical Take-Off and Landing vehicle models are considered for recharging. The effects of transmitter frequency, antenna size, and beam width are analyzed. Based on past experiments in the industry, a 2.5 kW power beam is selected. A no-drag rectifying antenna under the belly of the vehicle is selected along with the conversion efficiency, power density, and its size. The combined efficiency of the transmit/receive system as well as the beam containment values are addressed. These parameters are chosen to assess viability and feasibility of the energy augmentation method to establish safety for humans on-board from exposure to the transmitted energy. NASA will test the concept of operations in a laboratory experiment with parameters selected and presented in this paper.

eVTOL vehicles↗
NASA NTRS2021

On the Settling Depth of Meltwater Escaping From Beneath Antarctic Ice Shelves

Antarctic glacial meltwater is thought to play an important role in determining large-scale Southern Ocean climate trends, yet recent modeling efforts have proceeded without a good understanding of how its vertical distribution in the water column is set. To rectify this, here we conduct new large-eddy simulations of the ascent of a buoyant meltwater plume after its escape from beneath an Antarctic ice shelf. We find that the meltwater’s settling depth is primarily a function of the buoyancy forcing per unit width of the source and the ambient stratification, consistent with the classical theory of turbulent buoyant plumes and in contrast to previous work that suggested an important role for centrifugal instability. Our results further highlight the significant role played by localized variability in stratification; this helps explain observed interannual variability in the vertical meltwater distribution near Pine Island Glacier. Because of the vast heterogeneity in mass loss rates and ambient conditions at different Antarctic ice shelves, a dynamic parameterization of meltwater settling depth may be crucial for accurately simulating high-latitude climate in a warming world; we discuss how this may be developed following this work, and where the remaining challenges lie.

Antarctic glacial meltwater↗
NASA NTRS2023

Exploring the ARNTL and RORc Genes' Impact on Lipid Accumulation in the Liver via the Circadian Rhythm

The objective of our proposed experiment is to prove the significance of the upregulation of the ARNTL gene and down regulation of the RORc gene in space, highlighting their crucial roles in causing circadian rhythm misalignment during spaceflight, ultimately resulting in liver lipid accumulation. This experiment was created by thoroughly analyzing the genetic data (UseGalaxy) in OSD-245, Transcriptional analysis of liver from mice flown on the RR-6 mission (NASA GeneLab), and making a comparison between the Flight ISS Terminal and the Ground Control ISS Terminal groups. In our study, we intend to establish experimental groups of Mus musculus (lab mice), with 4 of these groups designated for space travel, while the remaining groups will serve as ground control samples on Earth. Both the space and ground conditions are categorized into four groups according to the genetic makeup of the mice. Within each condition, there will be a control group representing the wild type genes, and the experimental groups will involve knockout mice for ARNTL and RORc. We will then compare the lipid accumulation between the ground control mice and FLT mice to understand whether or not spaceflight causes lipid accumulation, due to a misaligned circadian rhythm. The experiment is anticipated to yield two main outcomes. Firstly, the upregulation of ARNTL is expected to rectify the circadian rhythm misalignment in space, consequently heightening lipid accumulation within the liver. Secondly, the downregulation of RORc is predicted to result in a diminished immune response in the liver, thereby facilitating lipid accumulation. Our space research is expected to aid in lipid buildup countermeasures, informing scientists regarding astronaut protection and providing insights into obesity and non-alcoholic fatty liver disease.

GL4HS↗
NASA NTRSDate not supplied

A Concept of Operations for Power Beaming of Electric Air Vehicles

A concept of operations is presented for power beaming of microwaves to extend battery charge of an electric air vehicle. Critical aspects of airspace operations and power beam charging are addressed. Three classes of electric Vertical Take-Off and Landing vehicle models are considered for recharging. The effects of transmitter frequency, antenna size, and beam width are analyzed. Based on past experiments in the industry, a 2.5 kW power beam is selected. A no-drag rectifying antenna under the belly of the vehicle is selected along with the conversion efficiency, power density, and its size. The combined efficiency of the transmit/receive system as well as the beam containment values are addressed. These parameters are chosen to assess viability and feasibility of the energy augmentation method to establish safety for humans on-board from exposure to the transmitted energy. NASA will test the concept of operations in a laboratory experiment with parameters selected and presented here.

eVTOL vehicles↗
NASA NTRSDate not supplied

Noise Prediction of Multi-stream Internally Mixed Jets with External and Internal Plugs using Large-Eddy Simulation

This paper presents results from ongoing research on jet noise prediction using wall-modeled large eddy simulations (WMLES) conducted within the Launch Ascent and Vehicle Aerodynamics (LAVA) computational framework. The study primarily focuses on the aeroacoustic implications of multi-stream nozzle configurations with internal mixing and both internal and external plugs, at a Reynolds number of 1×10 6 based on the nozzle exit diameter. While internal mixing nozzles have long been considered for jet noise reduction, the complexities of their impact on overall noise levels remain insufficiently understood. This research applies established best practices for WMLES to these complex nozzle configurations, aiming to assess their efficacy and identify limitations in accurately predicting noise behaviors. Through detailed comparisons with experimental data obtained from NASA’s Glenn Research Center, initial findings underscore the challenges inherent in current simulation practices when confronted with intricate geometric and operational conditions. Responding to these challenges, the study explores innovative computational approaches to rectify discrepancies noted between experimental outcomes and CFD predictions. Once example is the introduction of a resonating sound source in the simulation environment to mimic potential unobserved acoustic phenomena.A second example is the strategic modifications to the geometry of external plugs to account for real-world deformations caused by heating and gravity. These novel strategies aim to enhance the accuracy and reliability of noise predictions from supersonic jets, advancing our understanding and capability to effectively reduce jet noise in commercial supersonic aircraft

CST↗
NASA NTRS1966

Advanced transmitter development

Testing of high voltage power supply and linear exciter for Mariner transmitter noise amplitude modulation

SILICON CONTROL RECTIFIER /SCR/↗