Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “power coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Network-cognizant voltage droop control

The present disclosure provides techniques for network-cognizant droop control in power systems, such as a power distribution system. An example device includes a processor configured to determine, based on (i) a model representing a structure of a power system that includes a plurality of energy resources and (ii) an indication of predicted uncontrollable power injections in the power system, for each controllable energy resource in the plurality of energy resources, a respective value of a first droop coefficient and a respective value of a second droop coefficient. The processor may be further configured to cause at least one controllable energy resource in the plurality of energy resources to modify an output power of the at least one energy resource based on the respective value of the first droop coefficient and the respective value of the second droop coefficient.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Analyzing Gas Turbine-Generator Performance of the Hybrid Power System

We report kinetic energy available from the turbomachinery may boost short-term ramp rates during load shifting between generator and fuel cell that may be exploited to optimize the performance of turbine-fuel cell hybrid systems during load following. The paper starts with modeling a gas turbine, gearbox, and generator sitting on the rigid shafts as a two-mass model primarily for estimating the rotational inertia available from the turbogenerator. The gas turbine and its environment impose constraints of available space allowances, measurements from high-speed rotating parts, lack of accessibility to the shaft of measure, making replacements and/or required installation adjustments of the torque transducer difficult. It is demonstrated that in the absence of torque measurement, the data containing only a slow excursion of the rotor motion in response to a slight load change is sufficient to determine inertia and damping coefficients from the model. Furthermore, the generator’s reactive power capability was investigated because it serves as an asset in integrated hybrid systems to meet dynamic reactive power demands, reducing the burden on the fuel cell’s power electronics control in generating reactive power.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1973

Wind tunnel investigation of an upper surface blown jet-flap powered-lift configuration

An investigation has been conducted in the Langley full-scale tunnel to determine the performance and static stability and control characteristics of a four-engine, upper surface blown jet-flap powered-lift configuration with a swept wing. The investigation included test performed over a range of angle of attack (-4 deg to 36 deg), angle of sideslip (-5 deg to 5 deg), and thrust coefficients (0 to 4.32) for both symmetric and engine-out power conditions and for horizontal and vertical tails both on and off. In addition to the four-engine tests, a few tests were made with the outboard engines removed to simulate a twin-engine powered-lift transport configuration.

Phelps, A. E., III↗
DOE OSTI2024

Fourier Analysis and Design of a Shielded 120kW Inductive Wireless System

High-power inductive wireless power transfer (WPT) systems for EVs are designed to meet specifications such as stray field, power level, efficiency, misalignment tolerance, and ground clearance. These metrics are all heavily influenced by the coil geometry. Herein this paper proposes a coil design method based on the Fourier Analysis Method (FAM) which is an analytical method for directly designing coil geometries to meet stray field and power level requirements through an optimization of Fourier basis function coefficients. In this work, two 120 kW WPT proof-of-concept demonstrators with low stray field and high efficiency are built from FAM optimization results to validate the models and show the impact of the FAM design process. Experimental validation of the Gen. 2 demonstrator at 120 kW output power resulted in a measured DC/DC efficiency of 97.2% at alignment with a 125 mm airgap. At the 120 kW test point, the stray fields 80 cm away from the center of the airgap between the coil assemblies were 3.4 µT(rms) on the X-axis and 3.5 µT(rms) on the Y-axis, much lower than the 27 µT(rms) ICNIRP limit.

42 ENGINEERING↗
NASA NTRSDate not supplied

Effects of Varying the Heat Transfer Coefficient on Engine Performance

A physics-based Nuclear Thermal Propulsion (NTP) Testing Reference Design (TRD) power balance model was coded in Simulink to investigate engine performance for various design and parameter modifications. Since the primary mode of heat transfer in NTP engines is convective, the convective heat transfer coefficient (HTC) is a key parameter that requires accurate representation. The industry standard Westinghouse correlation has an uncertainty of ±20% which was investigated in this study. The results showed that a 20% decrease in the HTC led to a 4.14% increase in maximum fuel temperature while a 20% decrease in the HTC led to a 1.81% decrease in maximum fuel temperature suggesting that narrowing the uncertainty of this correlation through experimental work would be a critical step in the development of NTP engines. Furthermore, a maximum fuel temperature relationship with specific impulse was developed for the TRD engine which showed potential engine operation between specific impulse values of 715 and 900 seconds with minimal changes to the engine design. This graph could be useful for high level vehicle performance estimations for fuel types with different maximum operating temperatures.

Heat Transfer Coefficient↗
DOE OSTI2024

Compression Acceleration of Protons and Heavier Ions at the Heliospheric Current Sheet

Abstract Recent observations by the Parker Solar Probe (PSP) suggest that protons and heavier ions are accelerated to high energies by magnetic reconnection at the heliospheric current sheet (HCS). By solving the energetic particle transport equation in large-scale MHD simulations, we study the compression acceleration of protons and heavier ions in the reconnecting HCS. We find that the acceleration of multispecies ions results in nonthermal power-law distributions with a spectral index consistent with the PSP observations. Our study shows that the high-energy cutoff of protons can reach E max ∼ 0.1 –1 MeV depending on the particle diffusion coefficients. We also study how the high-energy cutoff of different ion species scales with the charge-to-mass ratio E max ∝ ( Q / M ) α . When determining the diffusion coefficients from the quasi-linear theory with a Kolmogorov magnetic power spectrum, we find that α ∼ 0.4, which is somewhat smaller than α ∼ 0.7 observed by PSP.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1980

A power law fit to oxygen absorption at 60 GHz and its application to remote sensing of atmospheric temperature

The paper presents an empirical study of the oxygen spectrum near 60 GHz with reference to its applicability to the remote sensing of the tropospheric and lower stratospheric temperature. It is demonstrated that the absorption coefficient of oxygen at 60 GHz can be fitted to the power law form with a relative rms error of about 8%. The power law form, when used in conjunction with the weighting function, permits the definition of some basic quantities in the passive remote sensing of the atmospheric temperature. It is shown how the power law form has been utilized in processing data from the Nimbus 5 microwave spectrometer experiment. The algorithm presented can be applied to spectrometer experiments at infrared frequencies.

Poon, R. K. L.↗
NASA NTRS2007

Continued Investigation of Leakage and Power Loss Test Results for Competing Turbine Engine Seals

Seal leakage decreases with increasing surface speed due to reduced clearances from disk centrifugal growth. Annular and labyrinth seal leakage are 2-3 times greater than brush and finger seal leakage. Seal leakage rates increase with increasing temperature because of seal clearance growth due to different coefficients of thermal expansion between the seal and test disk. Seal power loss is not strongly affected by inlet temperature. Seal power loss increases with increasing surface speed, seal pressure differential, mass flow rate or flow factor, and radial clearance. The brush and finger seals had nearly the same power loss. Annular and labyrinth seal power loss were higher than finger or brush seal power loss. The brush seal power loss was the lowest and 15-30% lower than annular and labyrinth seal power loss.

Delgado, Irebert R.↗
NASA NTRS1978

Measurement of dielectronic recombination rates for the iron ions Fe IX-XI

Iron is injected into a well-diagnosed theta-pinch plasma. The intensities of lines from various ionization stages are measured as functions of time and interpreted by means of a time-dependent corona ionization-recombination model. Effective coefficients for dielectronic recombination at electron densities of approximately 3 by 10 to the 16th power per cu cm are equal to or smaller than presently accepted theoretical values for low-density plasmas. Rate coefficients for ionization tend to be smaller than theoretical values.

Brooks, R. L.↗
NASA NTRS1983

Method for retrieving the true backscattering coefficient from measurements with a real antenna

Coherent and incoherent scattering produce contributions to the power backscattered by a surface at angles near normal incidence, and these contributions are further weighed by the antenna pattern. On the basis of a theoretical model describing the backscattering from a rough soil surface, a procedure is developed for retrieving the true angular pattern of the backscattering coefficient from its measured estimates, where these estimates are based on the usual assumption that the coefficient is approximately constant over the angular extent of the antenna beam for narrow beam systems. The retrieved backscattering coefficient patterns were then used to evaluate the dependence of the coefficient on soil surface roughness at 1.5, 4.25, and 7.25 GHz.

Ulaby, F. T.↗
DOE OSTI2021

Bimodal particle distributions with increased thermal conductivity for solid particles as heat transfer media and storage materials

Solid particles are being considered in several high temperature thermal energy storage systems and as heat transfer media in a variety of advanced power generation systems, particularly in concentrated solar power plants. The downside of such an approach is the low overall heat transfer coefficients caused by the inherently low thermal conductivity values of the low-cost solid media when coupled to heat exchanger for the power cycle working fluid. Choosing the right particle size distribution, emittance, and material of the solid media can all make a substantial difference in packed bed thermal conductivity. Current research though exclusively focuses on continuous unimodal distributions of particles. Here, in this work, we propose the use of a binary particle system with a bimodal size distribution to significantly increase packed bed thermal conductivity by reducing packed bed porosity. This is the first study related to ceramic solid particle heat transfer that has considered the thermal conductivity of non-unimodal size distributions at room and elevated temperatures. The following study found that for the binary particle system using Carbo particles CP 16/30 – CP 70/140 where the large particle volume fraction was 50% there was an 17–47% increase in packed bed thermal conductivity when compared with a nearly unimodal particle size distribution of CP 16/30 between 50 and 300 °C. Two different porosity and effective thermal conductivity models were studied, with one providing better prediction of porosity but both effective thermal conductivity models providing less predictive capacity. Importantly this approach can have a substantial impact of thermal performance, with little to no impact on the particle cost.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Depletion layer recombination effects on the radiation damage hardness of gallium arsenide cells

The significant effect of junction depletion layer recombination on the efficiency of windowed GaAs cells was demonstrated. The effect becomes more pronounced as radiation damage occurs. The depletion is considered for 1 MeV electron fluences up to 10 to the 16th power e/sq m. The cell modeling separates damage in emitter and base or buffer layers using different damage coefficients is reported. The lower coefficient for the emitter predicts less loss of performance at fluences greater than 10 to the 15th power e/sq cm. A method for obtaining information on junction recombination effects as damage proceeds is described; this enables a more complete diagnosis of damage to be made.

Garlick, G. F. J.↗
NASA NTRS1974

Measurements of ion-molecule reactions of He plus, H plus, HeH plus with H sub 2 and D sub 2

A drift tube mass spectrometer apparatus has been used to determine the rate coefficient, energy dependence and product ions of the reaction He(+) +H2. The total rate coefficient at 300 K is 1.1 plus or minus 0.1) 10 to minus 13th power cu cm/sec. The reaction proceeds principally by dissociative charge transfer to produce H(+), with the small remainder going by charge transfer to produce H2(+) and by atom rearrangement to produce HeH(+). The rate coefficient increases slowly with increasing ion mean energy, reaching a value of 2.8 x ten to the minus 13th power cu cm sec at 0.18 eV. The corresponding reaction with deuterium, He(+) + D2, exhibits a value (5 plus or minus 1) x 10 to the minus 14th cu cm/sec at 300K. The reaction rates for conversion of H(+) and HeH(+) to H3(+) on collisions with H2 molecules are found to agree well with results of previous investigations.

Johnsen, R.↗
DOE OSTI2022

Effective bias expansion for 21-cm cosmology in redshift space

A near-future detection of the 21-cm signal from the epoch of reionization will provide unique opportunities to probe the underlying cosmology, provided that such cosmological information can be extracted with precision. To this end, we further develop effective field theory (EFT) inspired techniques for the 21-cm brightness temperature field during the epoch of reionization, incorporating renormalized bias and a treatment of redshift space distortions. Notably, we confirm that in redshift space, measures of the 21-cm brightness, e.g., the power spectrum, should have irreducible contributions that lack a bias coefficient and therefore contain direct, astrophysics-free information about the cosmological density field; in this work, we study this effect beyond linear order. To validate our theoretical treatment, we fit the predicted EFT Fourier-space shapes to the thesan suite of hydrodynamical simulations of reionization at the field level, where the considerable number of modes prevents overfitting. We find agreement at the level of a few percent between the 21-cm power spectrum from the EFT fits and simulations over the wave number range k ≲ 0.8 h/Mpc and neutral fraction x HI ≳ 0.4, which is imminently measurable by the Hydrogen Epoch of Reionization Array and future experiments. Furthermore, the ability of the EFT to describe the 21-cm signal extends to simulations that have different astrophysical prescriptions for reionization as well as simulations with interacting dark matter.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1975

Modulation of low-energy cosmic rays

The relation between the diffusion coefficient of cosmic rays in the solar wind and the power spectrum of interplanetary magnetic field fluctuations, established in recent theories, is tested directly for low energy protons (below 80 MeV). In addition, an attempt is made to determine whether the particles are scattered by magnetic field discontinuities or by fluctuations between discontinuities. Predictions of a perturbation solution of the Fokker-Planck equation are compared with observations of the cosmic ray radial gradient. It is found that at energies between 40 and 80 MeV, galactic cosmic ray protons respond to changes in the predicted diffusion coefficients (i.e., the relationship under consideration holds at these low energies). The relation between changes in the proton flux and modulation parameters is best when the contribution of discontinuities is subtracted, which means that scattering is caused by fluctuations between discontinuities. There appears to be no distinct relation between changes in the modulation parameters and changes in the intensity of 20 to 40 MeV protons.

Sari, J. W.↗
DOE OSTI2024

Enhancing the Conductivity and Thermoelectric Performance of Semicrystalline Conducting Polymers through Controlled Tie Chain Incorporation

Abstract Conjugated polymers are promising materials for thermoelectric applications, however, at present few effective and well‐understood strategies exist to further advance their thermoelectric performance. Here a new model system is reported for a better understanding of the key factors governing their thermoelectric properties: aligned, ribbon‐phase poly[2,5‐bis(3‐dodecylthiophen‐2‐yl)thieno[3,2‐b]thiophene] (PBTTT) doped by ion‐exchange doping. Using a range of microstructural and spectroscopic methods, the effect of controlled incorporation of tie‐chains between the crystalline domains is studied through blending of high and low molecular weight chains. The tie chains provide efficient transport pathways between crystalline domains and lead to significantly enhanced electrical conductivity of 4810 S cm −1 , which is not accompanied by a reduction in Seebeck coefficient or a large increase in thermal conductivity. Respectable power factors of 173 µW m −1 K −2 are demonstrated in this model system. The approach is generally applicable to a wide range of semicrystalline conjugated polymers and could provide an effective pathway for further enhancing their thermoelectric properties and overcome traditional trade‐offs in optimization of thermoelectric performance.

Chemistry↗
DOE OSTI2021

The role of current and emerging technologies in meeting Japan’s mid- to long-term carbon reduction goals

Using Japan as a proxy for a developed nation, we investigated the role of existing and nascent technologies in curbing carbon emissions. We simulated possible pathways to meeting 2030 and 2050 emission targets within the Japanese electricity supply sector using a single-region model in The Integrated MARKAL-EFOM System (TIMES). Critically, our simulations incorporate novel technologies like hydrogen electrolysers, carbon capture, photochemical water splitting, and emerging photovoltaic cells, assess long-term impacts up to the year 2100, and include life-cycle emissions and learning curves for parameters such as investment cost, efficiency, and emission coefficients. Results indicate that a hybrid approach, using nuclear power and hydrogen from renewable energy-based electrolysis, is cost-effective and provides long-term emission reduction along with energy security. Finally, nuclear, wind, solar, and hydrogen from renewables emerge as key emission reduction technologies, while natural gas with carbon capture plays a minor role in achieving emission reduction targets.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Improved lithium storage capacity and high rate capability of nitrogen-doped graphite-like electrode materials prepared from thermal pyrolysis of graphene quantum dots

Adopting a solid-phase microwave-assisted technique followed by thermal pyrolysis of N-functionalized graphene quantum dots, novel nitrogen-doped graphite-like (NGL) electrode materials were synthesized in this work and served as the anode for Li-ion batteries. The NGL anode demonstrated reversible capacity of 530 mAh g -1 at 0.1C, superior rate capability at high C rate operation (420 mAh g -1 at 5C), remarkable initial coulombic efficiency (>95.7%), and excellent cyclic stability along with high efficiency (>99.1%) during entire cycling. The NGL anode nanostructure enables improved lithium ion mobility and reversible Li + storage during cycling. The analysis of the Ragone plots revealed that the specific energy of NGL anode reaches to ca. 840 Wh kg -1 at the power density of 4200 W kg -1 . The diffusion coefficient of Li ions was measured as 1.69 × 10 -9 cm 2 s -1 for the NGL anode material, substantially improving over commonly used graphite electrodes (15–26 times higher Li + diffusivity). The high-rate cyclability as well as the cyclic stability of the NGL anodes were also confirmed via long-term cycling of full pouch cells assembled with ternary cathode and NGL anode. The robust design of the NGL anode materials introduced in this work, paves the way for designing next-generation lithium-ion batteries operating at ultra-high C rates.

25 ENERGY STORAGE↗