Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “point cloud”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Multi-axis Accelerometry and Rotation Sensing using a Point Source Atom Interferometer

A point source atom interferometer (PSI) is a device where atoms are split and recombined by applying a temporal sequence of Raman pulses during the expansion of a cloud of cold atoms behaving approximately as a point source. Unlike a conventional light pulse atom interferometer, the PSI can produce a signal that corresponds to multi-axis rotation only, independent of acceleration. In addition, it can be used to measure acceleration along one direction, independent of rotation. Here, we describe a modified PSI that can be used to measure multi-axis rotation and multi-axis acceleration. Specifically, this type of PSI can be used to measure two-axes rotation around the directions perpendicular to the light pulses, as well as the acceleration in all three directions, with only one pair of Raman beams. Using two pairs of Raman beams in orthogonal directions sequentially, such a scheme would enable the realization of a complete atom interferometric inertial measurement unit.

Li, Jinyang↗
NASA NTRS1989

Analytical optical scattering in clouds

An analytical optical model for scattering of light due to lightning by clouds of different geometry is being developed. The self-consistent approach and the equivalent medium concept of Twersky was used to treat the case corresponding to outside illumination. Thus, the resulting multiple scattering problem is transformed with the knowledge of the bulk parameters, into scattering by a single obstacle in isolation. Based on the size parameter of a typical water droplet as compared to the incident wave length, the problem for the single scatterer equivalent to the distribution of cloud particles can be solved either by Mie or Rayleigh scattering theory. The super computing code of Wiscombe can be used immediately to produce results that can be compared to the Monte Carlo computer simulation for outside incidence. A fairly reasonable inverse approach using the solution of the outside illumination case was proposed to model analytically the situation for point sources located inside the thick optical cloud. Its mathematical details are still being investigated. When finished, it will provide scientists an enhanced capability to study more realistic clouds. For testing purposes, the direct approach to the inside illumination of clouds by lightning is under consideration. Presently, an analytical solution for the cubic cloud will soon be obtained. For cylindrical or spherical clouds, preliminary results are needed for scattering by bounded obstacles above or below a penetrable surface interface.

Phanord, Dieudonne D.↗
DOE OSTI2020

A2Cloud‐RF : A random forest based statistical framework to guide resource selection for high‐performance scientific computing on the cloud

Summary This article proposes a random‐forest based A2Cloud framework to match scientific applications with Cloud providers and their instances for high performance. The framework leverages four engines for this task: PERF engine, Cloud trace engine, A2Cloud‐ext engine, and the random forest classifier (RFC) engine. The PERF engine profiles the application to obtain performance characteristics, including the number of single‐precision (SP) floating‐point operations (FLOPs), double‐precision (DP) FLOPs, x87 operations, memory accesses, and disk accesses. The Cloud trace engine obtains the corresponding performance characteristics of the selected Cloud instances including: SP floating point operations per second (FLOPS), DP FLOPS, x87 operations per second, memory bandwidth, and disk bandwidth. The A2Cloud‐ext engine uses the application and Cloud instance characteristics to generate objective scores that represent the application‐to‐Cloud match. The RFC engine uses these objective scores to generate two types of random forests to assist users with rapid analysis: application‐specific random forests (ARF) and application‐class based random forests. The ARF consider only the input application's characteristics to generate a random forest and provide numerical ratings to the selected Cloud instances. To generate the application‐class based random forests, the RFC engine downloads the application profiles and scores of previously tested applications that perform similar to the input application. Using these data, the RFC engine creates a random forest for instance recommendation. We exhaustively test this framework using eight real‐world applications across 12 instances from different Cloud providers. Our tests show significant statistical agreement between the instance ratings given by the framework and the ratings obtained via actual Cloud executions.

Samuel, David↗
NASA NTRS2018

Portable, Low-Cost, Column Carbon Dioxide and Methane Measurements for Validating Satellite Observations in Remote Locations

We present a low-cost (~$10K per instrument), portable solution to ground-based validation of satellite observations for difficult to reach locations with precisions of 1 ppm XCO2 and 10 ppb XCH4 for hourly data products. While Total Carbon Column Observing Network (TCCON) is the gold-standard for ground validation, there are locations where a ground column validation data point would be useful but conditions are not conducive to a permanent station. Examples include wetlands, thawing permafrost, the tropics, the Amazon, sub-Saharan Africa, as well as locations without a power grid or with geopolitical conflict. In addition, the low-cost and portability mean a geographical region can be studied in depth with multiple instruments. This passive, sun-pointing instrument is a miniaturized, laser heterodyne radiometer (mini-LHR) that has been under development by our team since 2009. It can be operated either in tandem with AERONET (a global network of 500 instruments that measure aerosol optical depth), or as a stand-alone instrument with a low-cost (~$3K), light-weight sun tracker. One of the main benefits of the mini-LHR is that it can quickly reach remote locations and provide a validation measurement even if there is limited or no infrastructure at the site. The instrument weighs ~10 lbs, fits into a backpack, and is powered by two folding solar panels and a battery pack. In clear conditions, the instrument can be set-up in under an hour. Portability means that mini-LHRs can be easily moved for side-by-side comparisons with other mini-LHRs and with TCCON which simplifies assessing instrument bias as well as accuracy. Like TCCON, the mini-LHR points directly at the sun with a narrow field-of-view and is its insensitivity to cloud and aerosol scattering that is common to nadir-pointing passive satellite approaches. Here we present a collection of sample data sets to demonstrate performance from locations that vary in climate, altitude, solar zenith angle, hours of sun per day, etc., as well as data from side-by-side TCCON comparisons. Retrievals of CO2 and CH4 were completed using the NASA/Goddard's Planetary Spectrum Generator (PSG) that incorporates meteorological inputs from Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) data set.

Wilson, Emily W.↗
NASA NTRS1996

Three-Dimensional Electromagnetic Monte Carlo Particle-in-Cell Simulations of Critical Ionization Velocity Experiments in Space

Although the existence of the critical ionization velocity (CIV) is known from laboratory experiments, no agreement has been reached as to whether CIV exists in the natural space environment. In this paper we move towards more realistic models of CIV and present the first fully three-dimensional, electromagnetic particle-in-cell Monte-Carlo collision (PIC-MCC) simulations of typical space-based CIV experiments. In our model, the released neutral gas is taken to be a spherical cloud traveling across a magnetized ambient plasma. Simulations are performed for neutral clouds with various sizes and densities. The effects of the cloud parameters on ionization yield, wave energy growth, electron heating, momentum coupling, and the three-dimensional structure of the newly ionized plasma are discussed. The simulations suggest that the quantitative characteristics of momentum transfers among the ion beam, neutral cloud, and plasma waves is the key indicator of whether CIV can occur in space. The missing factors in space-based CIV experiments may be the conditions necessary for a continuous enhancement of the beam ion momentum. For a typical shaped charge release experiment, favorable CIV conditions may exist only in a very narrow, intermediate spatial region some distance from the release point due to the effects of the cloud density and size. When CIV does occur, the newly ionized plasma from the cloud forms a very complex structure due to the combined forces from the geomagnetic field, the motion induced emf, and the polarization. Hence the detection of CIV also critically depends on the sensor location.

Wang, J.↗
NASA NTRS1990

Cloud parameters derived from GOES during the 1987 marine stratocumulus FIRE Intensive Field Observation (IFO) period

The Geostationary Operational Environmental Satellite (GOES) is well suited for observations of the variations of clouds over many temporal and spatial scales. For this reason, GOES data taken during the Marine Stratocumulus Intensive Field Observations (IFO) (June 29 to July 19, 1987, Kloessel et al.) serve several purposes. One facet of the First ISCCP Regional Experiment (FIRE) is improvement of the understanding of cloud parameter retrievals from satellite-observed radiances. This involves comparisons of coincident satellite cloud parameters and high resolution data taken by various instruments on other platforms during the IFO periods. Another aspect of FIRE is the improvement of both large- and small-scale models of stratocumulus used in general circulation models (GCMs). This may involve, among other studies, linking the small-scale processes observed during the IFO to the variations in large-scale cloud fields observed with the satellites during the IFO and Extended Time Observation (ETO) periods. Preliminary results are presented of an analysis of GOES data covering most of the IFO period. The large scale cloud-field characteristics are derived, then related to a longer period of measurements. Finally, some point measurements taken from the surface are compared to regional scale cloud parameters derived from satellite radiances.

Young, David F.↗
NASA NTRS1993

Cloud fields derived from satellite and surface data during FIRE cirrus phase 2

The interpretation of surface and aircraft measurements of cloud properties taken during field programs must take into account the large-scale cloud and meteorological conditions. Cloud properties are also required at scales beyond the point and line data taken from ground and aircraft platforms. Satellite data can provide a quantitative description of these large-scale cloud properties. When derived from geostationary satellite data, the cloud fields constitute a unique source for evaluating the development and demise of a cloud system. Satellites, however, can only see the tops of clouds, so that cloud layers below the uppermost cloud deck may remain undetected resulting in a incomplete depiction of the cloud system. Some multilayer clouds are amenable to detection from satellites. Many, especially in midlatitude cyclonic systems, can only be observed from the surface. A combination of surface and satellite cloud observations should be the most complete quantification of large-scale cloudiness if there are sufficient surface measurements. During the First International Satellite Cloud Climatology Project (ISCCP) Regional Experiment Phase 2 (FIRE-2) Cirrus Intensive Field Observation (IFO) period (November 13 - December 7, 1991) conducted at Coffeyville, Kansas, cirrus observations were taken in a variety of conditions. The IFO area was selected for a variety of reasons including the relatively dense network of surface weather stations and special surface instrumentation sites. Thus, the FIRE-2 IFO presents an excellent opportunity to combine cloud observations from surface and satellite observations. This paper presents an analysis of cloud properties on a mesoscale grid using satellite cloud property retrievals, surface observer data, and rawinsonde temperature and humidity profiles.

Minnis, Patrick↗
NASA NTRS1986

Comment on the paper 'On the influx of small comets into the earth's upper atmosphere. II - Interpretation' by L. A. Frank, J. B. Sigwarth and J. D. Craven

The proposal by Frank et al. (1986) that clouds of small comets periodically inject large amounts of H2O into the upper atmospheres of the earth, Venus, and Mars is examined critically, with a focus on transport and disposal mechanisms invoked to account for the large H2O masses involved. It is argued that observed parameter values (such as mixing ratios, vertical wind velocities, and H escape flows) prohibit transport by eddy, molecular diffusion, vertical avection, or coherent movement. In a reply by Frank et al., these objections are discussed in terms of an overall description of the decelerataion and penetration of a cometary water cloud, and H2O concentrations and mixing mechanisms consistent with observed values for the earth are proposed. It is suggested that an increase in cometary H2O influx could lead to concentrations attaining the frost point and to formation of a global mesospheric cloud with significant climate effects. A lower H2O influx rate for Venus (consistent with observed H loss and atmospheric H2O concentration) and relatively rapid loading of the Mars surface and atmosphere with H2O ice and vapor (followed by brief warming periods with increased exospheric H2O outflow and surface flow of liquid H2O) are considered.

Donahue, T. M.↗
DOE OSTI2023

Using High-Resolution NSRDB Data to Evaluate Cloud Mask Forecast from WRF-Solar EPS

Validating spatiotemporal distributions of cloud forecasts using numerical weather prediction (NWP) models is difficult as this requires high-quality cloud-property at significantly high spatial and temporal resolution over extended periods of time. Observations of cloud properties, such as cloud mask, cloud optical thickness, and cloud type, are vital for assessing the capability of NWP models to forecast various types of clouds. Using the National Solar Radiation Database (NSRDB), this research evaluates ensemble cloud-mask predictions from the WRF-Solar ensemble prediction system (WRF-Solar EPS). From the WRF-Solar EPS, day-ahead solar forecasts for the contiguous United States (CONUS) for 2018 are simulated. Given the NSRDB data is accessible at a resolution of 2 km, we can calculate the cloud fraction across the 9-km grid of WRF-Solar EPS. This allows us to spatially assess the cloud-mask forecasts using two methods against the high-resolution NSRDB: (a) considering all 2-km NSRDB clouds in the forecast domain (EMAll), and (b) using a minimum cloud fraction threshold of 50% to designate a pixel as cloudy (EMP50). The low-resolution cloud masks from WRF-Solar EPS are evaluated directly against the cloud-resolving scale gridded observations from NSRDB using EMAll. With EMP50, we presume that scenes with less than 50% cloud cover from the 2-km NSRDB are clear. Thus, this assessment approach allows for a fair comparison with WRF-Solar EPS resolved to a 9-km grid. A method of point-by-point verification is used to evaluate dichotomous (yes/no) cloud mask predictions against the NSRDB. For each pixel of model extent, cloud frequency and traditional metrics (e.g., probability of detection, false alarm rate, and hit rate, etc.) are computed and compared with satellite-derived data sets. Mismatched cloud frequency (MCF) is computed to measure the present capability of WRF-Solar EPS in representing various types of clouds, which are categorized using three levels of cloud top height (CTH) and cloud optical depth (COD) across entire CONUS. Preliminary results show that the WRF-Solar EPS provides MCF values ranging from 9% to 46%, 16% to 33%, and 8% to 27% for low-level, middle-level, and high-level clouds, respectively, for three CTHs. The model produces MCFs ranging from 27% to 46%, 13% to 34%, and 8% to 19% for thin, medium-thickness, and thick clouds, respectively, for three CODs. The presentation will include a detailed description of the current outcomes as well as potential future extensions. The evaluation approach established in this study is readily extensible to the evaluation of cloud predictions from different ensemble NWP models. In addition, the findings of the suggested evaluation technique aid in identifying model weaknesses and will ultimately lead to advances in WRF-Solar EPS's skill in predicting clouds and solar irradiance.

cloud mask forecast↗
DOE OSTI2023

Southern Ocean Low Cloud and Precipitation Phase Observed During the Macquarie Island Cloud and Radiation Experiment (MICRE)

Shallow cloud decks residing in or near the boundary layer cover a large fraction of the Southern Ocean (SO) and play a major role in determining the amount of shortwave radiation reflected back to space from this region. In this article, we examine the macrophysical characteristics and thermodynamic phase of low clouds (tops <3 km) and precipitation using ground-based ceilometer, depolarization lidar and vertically-pointing W-band radar measurements collected during the Macquarie Island Cloud and Radiation Experiment (MICRE) from April 2016 to March 2017. During MICRE, low clouds occurred ~65% of the time on average (slightly more often in austral winter than summer). About 2/3 of low clouds were cold-topped (temperatures ≤0°C). These were thicker and had higher bases on average than warm-topped clouds. 83%–88% of cold-topped low clouds were liquid phase at cloud base (depending on the season). The majority of low clouds had precipitation in the vertical range 150–250 m below cloud base, a significant fraction of which did not reach the surface. Phase characterization is limited to the period between April 2016 and November 2016. Small-particle (low-radar-reflectivity) precipitation (which dominates precipitation occurrence) was mostly liquid below-cloud, while large-particle precipitation (which dominates total accumulation) was predominantly mixed/ambiguous or ice phase. Approximately 40% of cold-topped clouds had mixed/ambiguous or ice phase precipitation below (with predominantly liquid phase cloud droplets at cloud base). Below-cloud precipitation with radar reflectivity factors below about -10 dBZ were predominantly liquid, while reflectivity factors above about 0 dBZ were predominantly ice.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2013

B- and A-Type Stars in the Taurus-Auriga Star-Forming Region

We describe the results of a search for early-type stars associated with the Taurus-Auriga molecular cloud complex, a diffuse nearby star-forming region noted as lacking young stars of intermediate and high mass. We investigate several sets of possible O, B, and early A spectral class members. The first is a group of stars for which mid-infrared images show bright nebulae, all of which can be associated with stars of spectral-type B. The second group consists of early-type stars compiled from (1) literature listings in SIMBAD, (2) B stars with infrared excesses selected from the Spitzer Space Telescope survey of the Taurus cloud, (3) magnitude- and color-selected point sources from the Two Micron All Sky Survey, and (4) spectroscopically identified early-type stars from the Sloan Digital Sky Survey coverage of the Taurus region. We evaluated stars for membership in the Taurus-Auriga star formation region based on criteria involving: spectroscopic and parallactic distances, proper motions and radial velocities, and infrared excesses or line emission indicative of stellar youth. For selected objects, we also model the scattered and emitted radiation from reflection nebulosity and compare the results with the observed spectral energy distributions to further test the plausibility of physical association of the B stars with the Taurus cloud. This investigation newly identifies as probable Taurus members three B-type stars: HR 1445 (HD 28929), τ Tau (HD 29763), 72 Tau (HD 28149), and two A-type stars: HD 31305 and HD 26212, thus doubling the number of stars A5 or earlier associated with the Taurus clouds. Several additional early-type sources including HD 29659 and HD 283815 meet some, but not all, of the membership criteria and therefore are plausible, though not secure, members.

B- and A-Type↗
NASA NTRS2004

Deep Convective Cloud Top Heights and Their Thermodynamic Control During CRYSTAL-FACE

Infrared (11 micron) radiances from GOES-8 and local radiosonde profiles, collected during the Cirrus Regional Study of Tropical Anvils and Cirrus Layers-Florida Area Cirrus Experiment (CRYSTAL-FACE) in July 2002, are used to assess the vertical distribution of Florida-area deep convective cloud top height and test predictions as to its variation based on parcel theory. The highest infrared tops (Z(sub 11)) reached approximately to the cold point, though there is at least a 1-km uncertainty due to unknown cloud-environment temperature differences. Since lidar shows that visible 'tops' are 1 km or more above Z(sub 11), visible cloud tops frequently penetrated the lapse-rate tropopause (approx. 15 km). Further, since lofted ice content may be present up to approx. 1 km above the visible tops, lofting of moisture through the mean cold point (15.4 km) was probably common. Morning clouds, and those near Key West, rarely penetrated the tropopause. Non-entraining parcel theory (i.e., CAPE) does not successfully explain either of these results, but can explain some of the day-to-day variations in cloud top height over the peninsula. Further, moisture variations above the boundary layer account for most of the day-today variability not explained by CAPE, especially over the oceans. In all locations, a 20% increase in mean mixing ratio between 750 and 500 hPa was associated with about 1 km deeper maximum cloud penetration relative to the neutral level. These results suggest that parcel theory may be useful for predicting changes in cumulus cloud height over time, but that parcel entrainment must be taken into account even for the tallest clouds. Accordingly, relative humidity above the boundary layer may exert some control on the height of the tropical troposphere.

Sherwood, Steven C.↗
NASA NTRS1993

A satellite-borne radar wind sensor (RAWS)

Modeling global atmospheric circulations and forecasting the weather would improve if worldwide information on winds aloft were available. Accurate prediction of weather is important to agriculture, shipping, air traffic, and many other fields. Global system models of climate are of great importance. Current global atmospheric models use pressure measurements and thermodynamic properties to calculate the effects of wind for use in Numerical Weather Prediction (NWP) models. Inputs to the NWP models are temperature, pressure and wind velocities at different heights. Clearly direct wind measurements could significantly improve the NWP model performance. The RAdar Wind Sounder (RAWS) program at the University of Kansas is a study of the feasibility and the trade-offs in the design of a space-based radar system to measure wind vectors. This can be done by measuring the Doppler shift of cloud and rain returns from three or more points and calculating the components of the wind vector. The RAWS study to date uses the candidate system selected after preliminary study of frequencies and sensitivities. Two frequencies chosen, 10 and 35 GHz, allow higher sensitivity for clouds and more penetration for rain. The past year was devoted to modeling the signal-to-noise ratio (SNR) achievable for the two frequencies. The determination of SNR versus cloud penetration depth used a cloud backscattering and attenuation model in the appropriate radar equation. Calculations assumed reasonable losses in reception and transmission, in addition to the atmospheric attenuation. We discovered that ice clouds provide a higher SNR than previously calculated, but some water clouds give lower SNRs than we calculated before. One of the primary issues in the SNR calculation was the choice of the drop size distribution. Although Xin used several distributions (e.g., log normal, Khrigian and Mazin), this year we used the Deirmendjian cloud model. SNR versus cloud penetration plots were generated to validate the candidate system. Rain, which appears in the cloud models at the lower altitudes, provides ample SNR, as do the higher clouds composed of ice particles. However, in some cloud situations we found the sensitivity for the clouds was marginal or inadequate. At 35 GHz, two of the cloud models characterized by 1 to 2 g/cu m of water content at altitudes extending from 150 to 1500 meters, produced a sufficient SNR. Other models, however, with water contents ranging from 0.5 to 4 g/cu m and altitudes up to 4000 meters, exhibit SNR of -3 to -23 dB, largely because of attenuation in the upper cloud layers. These results coupled with the lower SNR at 10 GHz, led to an investigation of alternate frequencies. The rain present beneath these clouds provides adequate SNR at 10 GHz, and in most cases, at GHz.

Moore, Richard K.↗
NASA NTRS2004

Cloud-Vegetation Radiative Interaction: What Can We Learn from it about Cloud Optical Properties?

Because of their radiative interactions, the vegetation canopy and the atmosphere are coupled together; each serves as a boundary condition to the radative transfer equations in the adjacent medium. To better understand radiative processes in these media we need an accurate description of their interactions. This presentation outlines a technique needed to describe interactions between vegetation and clouds and exploits it to retrieve cloud optical depth from ground-based radiance measurements. measurements of zenith radiance in the RED and NIR spectral regions. In addition to an algebraic combinations of spectral radiances such as Normalized Difference Cloud Index (NDCI) that can result in poor retrievals due to its insensitivity to cloud fraction, both RED and NIR radiances as points on the "RED vs. NIR" plane are proposed to be used for retrieval. The proposed method is applied to a multi-channel sunphotometer (as a part of AERONET) measurements at the ARM site in Oklahoma. In addition to cloud optical depth, the new method also infers a "radiatively effective" cloud fraction.

Marshak, Alexander↗
DOE OSTI2023

Cloud microphysical response to entrainment and mixing is locally inhomogeneous and globally homogeneous: Evidence from the lab

Entrainment of dry air into clouds strongly influences cloud optical and precipitation properties and the response of clouds to aerosol perturbations. The response of cloud droplet size distributions to entrainment–mixing is examined in the Pi convection-cloud chamber that creates a turbulent, steady-state cloud. The experiments are conducted by injecting dry air with temperature (T e ) and flow rate (Q e ) through a flange in the top boundary, into the otherwise well-mixed cloud, to mimic the entrainment–mixing process. Due to the large-scale circulation, the downwind region is directly affected by entrained dry air, whereas the upwind region is representative of the background conditions. Droplet concentration (Cn) and liquid water content (L) decrease in the downwind region, but the difference in the mean diameter of droplets (D m ) is small. The shape of cloud droplet size distributions relative to the injection point is unchanged, to within statistical uncertainty, resulting in a signature of inhomogeneous mixing, as expected for droplet evaporation times small compared to mixing time scales. As T e and Q e of entrained air increase, however, Cn, L, and D m of the whole cloud system decrease, resulting in a signature of homogeneous mixing. The apparent contradiction is understood as the cloud microphysical responses to entrainment and mixing differing on local and global scales: locally inhomogeneous and globally homogeneous. This implies that global versus local sampling of clouds can lead to seemingly contradictory results for mixing, which informs the long-standing debate about the microphysical response to entrainment and the parameterization of this process for coarse-resolution models.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1991

Microwave simulations of a tropical rainfall system with a three-dimensional cloud model

A three-dinensional cloud model-microwave radiative transfer model combination is used to study the relations among the precipitation and other microphysical characteristics of a tropical oceanic squall line and the upwelling radiance at pertinent microwave frequencies. Complex brightness temperature-rain rate relations are evident at the full horizontal resolution (1.5 km) of the models, with spatial averaging producing smoother, shifter relations in most cases. Nonprecipitating cloud water is shown to be important in understanding the resulting distribution of brightness temperature. At the mature stage, convective portions of the cloud system are shown to produce different brightness temperature relations than the stratiform portion, primarily related to the distribution of cloud water. The evolution of the convective system from a small convective complex through its mature stage and the beginning of its dissipation also is shown to result in a variation of brightness temperature-rain relations, related to the distribution of cloud water and the evolution of ice in the precipitating system. The results of the study point to the need to take into account the evolution of nonprecipitating cloud water and precipitation-sized ice in the retrieval of rain from passive microwave space observations. This effect is evident for both the life cycle of individual convective elements and the life cycle of the convective system as a whole.

Adler, Robert A.↗
NASA NTRS2005

Development of High Altitude UAV Weather Radars for Hurricane Research

A proposed effort within NASA called (ASHE) over the past few years was aimed at studying the genesis of tropical disturbances off the east coast of Africa. This effort was focused on using an instrumented Global Hawk UAV with high altitude (%Ok ft) and long duration (30 h) capability. While the Global Hawk availability remains uncertain, development of two relevant instruments, a Doppler radar (URAD - UAV Radar) and a backscatter lidar (CPL-UAV - Cloud Physics Lidar), are in progress. The radar to be discussed here is based on two previous high-altitude, autonomously operating radars on the NASA ER-2 aircraft, the ER-2 Doppler Radar (EDOP) at X-band (9.6 GHz), and the Cloud Radar System (CRS) at W- band (94 GHz). The nadir-pointing EDOP and CRS radars profile vertical reflectivity structure and vertical Doppler winds in precipitation and clouds, respectively. EDOP has flown in all of the CAMEX flight series to study hurricanes over storms such as Hurricanes Bonnie, Humberto, Georges, Erin, and TS Chantal. These radars were developed at Goddard over the last decade and have been used for satellite algorithm development and validation (TRMM and Cloudsat), and for hurricane and convective storm research. We describe here the development of URAD that will measure wind and reflectivity in hurricanes and other weather systems from a top down, high-altitude view. URAD for the Global Hawk consists of two subsystems both of which are at X-band (9.3-9.6 GHz) and Doppler: a nadir fixed-beam Doppler radar for vertical motion and precipitation measurement, and a Conical scanning radar for horizontal winds in cloud and at the surface, and precipitation structure. These radars are being designed with size, weight, and power consumption suitable for the Global Hawk and other UAV's. The nadir radar uses a magnetron transmitter and the scanning radar uses a TWT transmitter. With conical scanning of the radar at a 35" incidence angle over an ocean surface in the absence of precipitation, the surface return over a single 360 degree sweep over -25 h-diameter region provides information on the surface wind speed and direction within the scan circle. In precipitation regions, the conical scan with appropriate mapping and analysis provides the 3D structure of reflectivity beneath the plane and the horizontal winds. The use of conical scanning in hurricanes has recently been demonstrated for measuring inner core winds with the IWRAP system flying on the NOAA P3's. In this presentation, we provide a description of the URAD system hardware, status, and future plans. In addition to URAD, NASA SBIR activity is supporting a Phase I study by Remote Sensing Solutions and the University of Massachusetts for a dual-frequency IWRAP for a high altitude UAV that utilizes solid state transmitters at 14 and 35 GHz, the same frequencies that are planned for the radar on the Global Precipitation System satellite. This will be discussed elsewhere at the meeting.

Heymsfield, Gerald↗
NASA NTRS1990

July 16, 1987 revisited: Lessons for modelers

A cross pattern was flown by the NCAR Electra in the restricted air space around San Nicolas Island (SNI). There was available a LANDSAT image coincident with the mission. The variability of cloud thickness along the flight track is discussed. The evidence points to variability in the water vapor content above the inversion as the controlling factor. This compounds the difficulty of parameterizing these clouds in General Circulation Models (GCMs). The importance of specifying correctly the upper boundary condition in cloud models is stressed. Particularly, in GCMs, calculating the humidity in the lower layers of the model is crucial for successful parameterization of marine stratocumulus clouds.

Hanson, Howard P.↗