Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parameter reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Use of high throughput screening methods to study dual-functional crosslinkable latexes

Herein, structure-formulation-property relationships for crosslinkable core-shell latexes were studied initially using high throughput screening methods and then using conventional experimental methods to determine optimum coating formulations. Two approaches that are used within coatings technology to improve sustainability are reduction in volatile organic compounds (VOC) and reduction in energy needed to cure coatings. Hybrid crosslinkable core-shell latexes have shown potential in meeting these challenges where film properties provided by particle coalescence are not sufficient and chemical crosslinking is needed. However, with numerous parameters involved such as latex particle architecture, nature and amount of crosslinker, and curing conditions, the screening of formulations via conventional coating testing methods becomes laborious and time-consuming. The results from high-throughput dye extraction and puncture testing were compared to data from conventional testing methods such as chemical resistance (MEK double rubs), pendulum hardness, and tensile testing to identify correlations. The dye extraction results have shown a strong correlation to solvent resistance and pendulum hardness data whereas toughness from puncture testing data correlated to tensile testing. Both high throughput dye extraction and puncture testing methods can be used for the accelerated screening of crosslinkable coating formulations to optimize curing parameters to achieve the best coating performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The Curious Case of [AnH(NR 2 ) 3 ] (An = Th, U; R = SiMe 3 ): Two Monomeric Actinide Hydrides Revisited

The reaction of AnCl 4 (DME) x (An = Th, x = 2; An = U, x = 0) with 4 equiv of NaNR 2 (R = SiMe 3 ) in THF at 65 °C results in the formation of [An{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (An = U, 1; An = Th, 2), and not the reported monomeric actinide hydrides, [AnH(NR 2 ) 3 ], as expected. Furthermore, both complexes 1 and 2 were characterized by X-ray crystallography. Surprisingly, their unit cell parameters are remarkably close to those reported for [AnH(NR 2 ) 3 ], suggesting that the original crystals of [AnH(NR 2 ) 3 ] were, in fact, [An{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ], but were misidentified. Reduction of 1 with 1.1 equiv of KC 8 in THF, in the presence of 1 equiv of 2.2.2-cryptand, results in the formation of [K(2.2.2-cryptand)][U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (3) in good yield. Likewise, the reaction of 1 with 1 equiv of bis(diisopropylamino)cyclopropenylidene (BAC) results in the formation of the BAC adduct, [(BAC)U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (4), in moderate yield. Finally, the addition of H 2 (10 bar) to 2 in C 6 D 6 at room temperature results in the formation of the targeted monomeric hydride, [ThH(NR 2 ) 3 ], in 32% yield, according to integrations against an internal standard. However, removal of the H 2 atmosphere results in rapid reformation of 2. In contrast, the addition of H 2 (10 bar) to 1 in C 6 D 6 at room temperature results in no apparent reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Representing Global Soil Erosion and Sediment Flux in Earth System Models

Abstract Soil erosion produces enormous amounts of sediment, carbon, and nutrient fluxes from land to rivers, thus playing crucial roles in global biogeochemical cycles and food security. To predict soil erosion in the context of climate and land use changes, we explicitly parameterize cropland management actions (i.e., irrigation, conserved agriculture, and crop residue management) and geological factors (i.e., lithology and glacier) in the Energy Exascale Earth System Model (E3SM) soil erosion module. The erosion model is calibrated using a global‐scale regionalized parameter calibration method. The spatial variabilities of the modeled and the Revised Universal Soil Loss Equation (RUSLE) based benchmark soil erosion are consistent across vegetation, climate and soil properties. Compared with independent data, our model shows a bias reduction in 59% of the observations relative to the RUSLE‐based soil erosion, with 53% of the bias reduction exceeding 50%. This improvement is mainly due to a better representation of the topographic effect on soil erosion. Our results indicate that conserved agriculture practices have effectively reduced soil erosion in cropland by over 25% in the United States and Argentina. In contrast, irrigation has increased soil erosion in many Asian countries. For upland sediment flux, our model is consistent with the WBMsed benchmark data in inter‐basin variability but could be more skillful in simulating intra‐basin variability because it couples soil erosion and sediment flux explicitly. The developed model provides useful skills for more realistic predictions of soil erosion and river sediment dynamics under environmental changes.

58 GEOSCIENCES↗
DOE OSTI2024

Revealing the role of redox reaction selectivity and mass transfer in current–voltage predictions for ensembles of photocatalysts

Photocatalysts are conceptually simple reaction units where nanoscale semiconductors integrated with catalysts drive a pair of redox reactions on illumination. However, the proximity of reaction sites performing cathodic and anodic reactions poses dire challenges to realize large light-to-fuel conversion efficiencies. In this study, a powerful, yet straightforward, equivalent-circuit detail-balance modeling framework is developed and applied to evaluate the performance of photocatalytic systems featuring multiple light absorbers. Specifically, low bandgap iridium-doped strontium titanate is modeled as a Z-scheme photocatalyst to achieve desirable hydrogen evolution and iron-based redox shuttle oxidation reactions. Our model has unique capabilities to simulate competing redox reactions and address mass-transfer limitations. In a significant departure from state-of-the-art circuit models, our study develops tools to perform load-line analyses by incorporating a net electrochemical load curve that includes both desired and competing redox reactions. Consequently, reaction selectivity is predicted from equivalent circuit models for photocatalytic and photoelectrochemical systems. Our investigation into ensembles comprised of multiple, semi-transparent light absorbers reveals their potential to outperform a single, optically thick light absorber, particularly when operated under mass-transfer-limited conditions. However, this outcome hinges on minimizing mass-transfer rates of select redox species to prevent undesired reactions of hydrogen oxidation and/or redox shuttle reduction. Our findings demonstrate that reaction selectivity can be achieved by tuning asymmetry in redox species mass-transfer even with perfectly symmetric electrocatalytic charge-transfer coefficients. The influences of various kinetic, mass-transfer, and thermodynamic parameters are explored to offer crucial insights for synthesis of the next-generation of photocatalysts and selective coatings, and reactor designs.

25 ENERGY STORAGE↗
DOE OSTI2025

Magnetism in EuAlSi and the Eu 1−𝑥 ⁢Sr 𝑥 ⁢ AlSi solid solution solid solution

The magnetic properties of EuAlSi, a compound comprising a honeycomb lattice of Al/Si atoms and a triangular lattice of Eu atoms, are presented. By means of single-crystal x-ray diffraction, we find that EuAlSi crystallizes in an AlB 2 -type structure with space group 𝑃⁢6/mmm and unit cell parameters 𝑎 = 4.2229⁢ (10) ⁢Å and 𝑐 = 4.5268 ⁢(12)⁢ Å. Our magnetic measurements indicate that EuAlSi is a soft ferromagnetic material with 𝑇 Curie = 25.8 K. The susceptibility follows the Curie-Weiss law at high temperatures, which allowed us to determine the paramagnetic Curie temperature 𝜃 𝑃 = 36.2 ⁢(1) ⁢K and an effective magnetic moment 𝜇 eff = 8.07 ⁢(1)⁢ µ 𝐵 /Eu. This value is in agreement with the theoretical value of 7.9 µ 𝐵 for Eu 2+ free ion. Moreover, we have prepared the Eu 1−𝑥 ⁢Sr 𝑥 ⁢ AlSi solid solution, where the atoms in the triangular lattice were systematically exchanged, in order to study the evolution of the collective quantum properties from the ferromagnetic EuAlSi toward the superconducting SrAlSi. Across the Eu 1−𝑥 ⁢Sr 𝑥 AlSi solid solution, the unit cell parameters change linearly, following Vegard’s law, and making the system reliable for studying composition dependence of the interplay between the crystal structure and physical properties. As the Sr content increases, i.e., 𝑥 increases, we note a consistent reduction of 𝜇 eff and 𝑇 Curie . Long-range magnetic order in Eu 1−𝑥 ⁢Sr 𝑥 ⁢ AlSi persists up to 𝑥 = 0.95, whereas superconductivity is only observed for samples with 𝑥 > 0.97.

Walicka, Dorota I. [University of Geneva (Switzerl↗
DOE OSTI2022

Predictive modeling of a subcritical pulverized-coal power plant for optimization: Parameter estimation, validation, and application

As renewable power generation deployment increases, fossil fuel plants are increasingly required to operate more flexibly. Many coal-fired power plants were originally designed to operate at base load and do not operate optimally at partial load. Predictive first-principles plant-wide models can be employed to identify opportunities for flexibility improvements and diagnose low-load operating issues. This paper describes the application of the Institute for the Design of Advanced Energy Systems Integrated Platform (IDAES) to model and optimize flexible power plant operations. The key benefits of using IDAES are that it provides an open-source, fully equation-oriented modeling framework for efficient modular model construction, reuse, and customization, together with a mathematical optimization framework leveraging powerful, state-of-the-art solvers. The process systems engineering workflow from predictive process simulation to parameter estimation, model validation, and plant optimization is applicable to a variety of existing and next-generation energy systems as well as other chemical and environmental processes. Here, to demonstrate this capability, a physics-based, steady-state model was developed to improve full- and part-load performance of the Escalante Generating Station, a 245 MWe (net) subcritical pulverized coal-fired power plant owned and operated by Tri-State Generation and Transmission Association. Specifically, sixty-nine model parameters were simultaneously estimated from several months of operating data enabling prediction of flow rates, temperatures, pressures, and steam quality throughout the plant. The validated model was leveraged by Escalante to reduce the minimum operating load from 90 MW to 50 MW by diagnosing a low-load water-hammer issue, enabling coal usage and emissions reductions during periods of low power demand. Additionally, opportunities for heat rate reduction (i.e., efficiency improvement) through a steeper sliding-pressure approach to load-following and optimization of other boiler operating variables were also identified and quantified. For example, a potential efficiency improvement of 0.7 percentage points was observed at half-load operation.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Physics-guided logistic classification for tool life modeling and process parameter optimization in machining

This paper describes a physics-guided logistic classification method for tool life modeling and process parameter optimization in machining. Tool life is modeled using a classification method since the exact tool life cannot be measured in a typical production environment where tool wear can only be directly measured when the tool is replaced. Here, in this study, laboratory tool wear experiments are used to simulate tool wear data normally collected during part production. Two states are defined: tool not worn (class 0) and tool worn (class 1). The non-linear reduction in tool life with cutting speed is modeled by applying a logarithmic transformation to the inputs for the logistic classification model. A method for interpretability of the logistic model coefficients is provided by comparison with the empirical Taylor tool life model. The method is validated using tool wear experiments for milling. Results show that the physics-guided logistic classification method can predict tool life using limited datasets. A method for pre-process optimization of machining parameters using a probabilistic machining cost model is presented. The proposed method offers a robust and practical approach to tool life modeling and process parameter optimization in a production environment.

Machine learning↗
DOE OSTI2024

Quantifying Capital Cost Reduction Pathways for Advanced Nuclear Reactors

The framework developed in this study is provided both as an excel sheet (https://inl.gov/content/uploads/2023/11/Nuclear-Reactor-Cost-Reduction-Pathway-Spreadsheet-Tool.xlsx) and a Python (Jupyter) Notebook (link: https://github.com/accert-dev/ACCERT/tree/main/Cost%20Reduction). Capital cost considerations are one of the primary inhibitors to the large-scale deployment of nuclear power plants. While it is widely accepted that first units will likely be expensive and relatively uncompetitive, it is reasonable to expect that subsequent units, built in relative quick succession, will be cheaper as they benefit from the so-called “learning effects”. However, the large degree of uncertainty associated with this parameter renders it challenging for first movers to invest in the first few expensive units. To resolve this impasse, the U.S. Department of Energy’s Advanced Nuclear Liftoff study advocated for the formation of large, committed order books of plants of the same technology to spread the costs across several units and kickstart the nuclear supply chain. The study also advocated best practices for avoiding overruns and keeping reactors on budget. This report builds on these key recommendations by attempting to quantify specific pathways toward cost reduction for nuclear energy. A capital cost estimation framework was built to untangle the effect of learning into a subset of key cost drivers, referred to as “levers”. Collectively, the choice of these levers is intended to reflect the decision-making of high-level stakeholders like plant owners and the government. In addition to the size of the firm orderbook, these levers included (a) cost drivers that are most often attributed to cost overruns such as architect/engineering (A/E) proficiency, construction proficiency, procurement service proficiency, design completion prior to the start of construction, and design maturity, and (b) cost reduction strategies such as modular construction, cross-site standardization, safety classification of the reactor building, and of the balance of plant. Two advanced reactor designs were leveraged as use cases and bottom-up cost estimates made with assumptions consistent with a well-executed first-of-a-kind project (WE-FOAK, i.e., almost no overruns) were used as baselines for the models. Cost correlations were surveyed from the literature to determine the impact of important variables on projected timelines and costs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Geostatistical interpolation of streambed hydrologic attributes with addition of left censored data and anisotropy

Spatial geostatistical interpolation of point measurements of streambed attributes in the hyporheic zone may be constrained by the streambed anisotropy, and data density and spatial distribution may significantly impact the results. Spatial clustering and low spatial data density can be caused by bedrock outcropping at the streambed limiting installation of in-stream piezometers. This study examines parameter error variability of the geostatistical interpolation using anisotropic interpolation methods and increasing the data density by adding left censored values (i.e., data below measurement limit) to locations where measurements were limited by exposed bedrock lining the streambed. The reduction in relative standard error of the interpolation was determined for the spatial distributions of streambed attributes including hydraulic conductivity, seepage flux, and mercury solute flux measured in two different years along a study reach in East Fork Poplar Creek, Tennessee, USA. Here, two methods to impute the left censored values were compared including the conventional half the detection limit substitution method, and the Stochastic Approximation of Expectation-Maximization (SAEM) algorithm, which both had comparable results. Imputing left censored data increased the data density to recommended ranges, reduced data clustering, increased the spatial dependence for some attributes, and reduced the standard error for each of the three attributes. For the reach considered herein, addition of the left censored values resulted in a larger error reduction than the consideration of anisotropy within the interpolation, which confirms the benefit of data addition to increase data density within data-limited river corridors.

58 GEOSCIENCES↗
DOE OSTI2022

Role of p-GaN layer thickness in the degradation of InGaN-GaN MQW solar cells under 405 nm laser excitation

GaN-based solar cells with InGaN multiple quantum wells (MQWs) are promising devices for application in space environment, concentrator solar systems, wireless power transmission and multi-junction solar cells. It is therefore important to understand their degradation kinetics when submitted to high-temperature and high-intensity stress. We submitted three samples of GaN-InGaN MQW solar cells with p-AlGaN electron-blocking-layer with different thickness of the p-GaN layer to constant power stress at 310 W/cm 2 , 175 °C for several hundred hours. The main degradation modes are a reduction of open-circuit voltage, short-circuit current, external quantum efficiency, power conversion efficiency and electroluminescence. In particular, we observed that a thinner p-GaN layer results in a stronger degradation observed on the cell operating parameters. The analysis of the dark I-V characteristics showed an increase in low-forward bias current and the analysis of electroluminescence showed a decrease in the electroluminescene emitted by the (forward biased) cell, as a consequence of stress. This work highlights that the cause of degradation is possibly related to a diffusion mechanism, which results in an increase of defect density in the active region. Finally, the impurities involved in the diffusion processes possibly originate from the p-side of the devices, therefore a thicker p-GaN layer reduces the amount of defects reaching the active region.

14 SOLAR ENERGY↗
DOE OSTI2024

Open Circuit Potential Method for Thermodynamic Hydricity Measurements of Metal Hydrides

Metal hydrides are prevalent in many catalytic reactions, and thermodynamic hydricity has emerged as a useful parameter for understanding and predicting key hydride transfer steps with these intermediates. An open circuit potentiometry method for determining the hydricity of metal hydrides with a single thermodynamic parameter is reported. The open circuit potential (OCP) of a solution containing a metal hydride and its conjugate hydride acceptor, along with a conjugate acid/base pair, is coupled with known values for the acid pK a and H + /H – reduction potential to determine the hydricity. Here, the reliability of the method was established by using potentiometry to obtain the hydricity of three hydride complexes with varying supporting ligands and transition metal elements in acetonitrile solvent, all within error of previously reported values. Advantages and drawbacks of this method are discussed, and a recommended workflow for practitioners is introduced.

Anions↗
DOE OSTI2021

Effects of organized convection parameterization on the MJO and precipitation in E3SMv1. Part I: Mesoscale heating

Mesoscale organization of convection is typically not represented in global circulation models, and hence its influence on the global circulation is not accounted for. The heating component of a parameterization that represents the dynamical and physical effects of circulations associated with organized convection, referred to as the multiscale coherent structure parameterization (MCSP), is implemented in the Energy Exascale Earth System Model version 1 (E3SMv1). Numerical simulations are conducted to assess its impact on the simulated climate. Besides E3SMv1 simulations, we performed high-resolution (1 km) simulations using the Weather Research and Forecasting (WRF) Model to determine the temperature tendencies induced by mesoscale convective systems embedded in deep convection. We tuned the free parameters of the MCSP based on the WRF simulations. MCSP heating enhances Kevin wave spectra in E3SMv1, improves the representation of the Madden-Julian Oscillation, and impacts on mean precipitation that vary with locations and seasons, including a reduction of biases over the tropical Pacific.

Climate Modeling↗
DOE OSTI2024

Fuel Behavior Implications of Reactor Design Choices in Pressurized Water SMRs

Small pressurized water reactors (PWRs) can feature boron free operation, natural circulation mode, reduced height assemblies and/or long refueling cycles. This paper attempts to explore core design optimization for each of these design evolutions. In consequence, five core design layouts are developed incorporating boron free operation with continuous control rods insertion, natural circulation with low burnup/low power density design, natural circulation with high burnup/low power density design, forced circulation with standard core power density design, and forced circulation with high power density design. These cores’ performance is compared to a standard 4-loop PWR. The design process aims to improve the fuel cycle cost under safety constraints through core design optimization using CASMO4E/SIMULATE3 reactor physics codes and FRAPCON4.1 fuel performance assessment tool. Core modeling assumes standard 17x17 PWR fuel assemblies loaded with low enriched uranium (LEU) up to 5wt% or LEU+ (i.e., below 10wt% enrichment) pellets with gadolinium oxide (Gd2O3) as the burnable poison. Satisfactory core and fuel performances are obtained for all the designed cores under steady state and considered overpower transients. For low power density operation, long cycle lengths are achieved reaching a 2.5- and a 5-year cycles and peak rod-average burnup is pushed to 83 MWd/kgU. Other cycle lengths are maintained at 18 months. Boron free operation exhibits the ability to achieve longer cycle lengths at the cost of higher peaking factors leading to high local power and fuel temperatures which prevents sizable power uprates and is deemed uneconomical. Fuel assembly height reduction allows coolant velocity retrofit which enables higher core power density without violating structural integrity of the fuel assembly. As a result, a core power density of 123 kW/l is reached where total cladding hoop strain becomes the limiting parameter.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Improving constraints on inflation with CMB delensing

Abstract The delensing of cosmic microwave background (CMB) maps will be increasingly valuable for extracting as much information as possible from future CMB surveys. Delensing provides many general benefits, including sharpening of the acoustic peaks, more accurate recovery of the damping tail, and reduction of lensing-inducedB-mode power. In this paper we present several applications of delensing focused on testing theories of early-universe inflation with observations of the CMB. We find that delensing the CMB results in improved parameter constraints for reconstructing the spectrum of primordial curvature fluctuations, probing oscillatory features in the primordial curvature spectrum, measuring the spatial curvature of the universe, and constraining several different models of isocurvature perturbations. In some cases we find that delensing can recover almost all of the constraining power contained in unlensed spectra, and it will be a particularly valuable analysis technique to achieve further improvements in constraints for model parameters whose measurements are not expected to improve significantly when utilizing only lensed CMB maps from next-generation CMB surveys. We also quantify the prospects of testing the single-field inflation tensor consistency condition using delensed CMB data; we find it to be out of reach of current and proposed experimental technology and advocate for alternative detection methods.

Astronomy & Astrophysics↗
DOE OSTI2020

Hydrolytic Aging in Rubber-Like Materials: A Micro-Mechanical Approach to Modeling

Abstract The effect of hydrolytic aging on mechanical responses of Rubber likes materials, in particular, Mullins effect and the permanent set has been modeled. Hydrolytic aging is considered as the result of the competition between two phenomena (1) chain scission and (2) cross-link scission/reformation. Both phenomena were modeled and thus, the strain energy of the polymer matrix is written with respect to three independent mechanisms; i) the shrinking original matrix which has not been attacked by water, ii) conversion of the first network to a new network due to the reduction of the crosslinks, and iii) energy loss from network degradation due to water attacks to ester groups. The model is validated with respect to a set of experimental data. Besides accuracy, the simplicity and few numbers of fitting parameters make the model a good choice for further implementations.

Bahrololoumi, Amir↗
DOE OSTI2021

Low-Cost Aero Technology Demonstrations

The main focus of this work was to demonstrate the use of polymeric additive manufacturing (AM) to create tooling for both preforming and consolidation. Polymeric tooling was utilized where both modest and higher pressures are used for part consolidation. The key focus for the AM tooling development was for fabrication of complex structures such as ducting, C-channel stiffened skins, and airfoils where conventional male tooling would typically be trapped in the cured part. The AM tooling was evaluated for use as a tool master used to fabricate and re-shape deformable/re-formable mandrels based on SpinTech’s shape memory composite technology known as Smart Tooling. The AM tooling was also evaluated for use as a mold for composite infusion and consolidation. Key performance parameters were tracked for project schedule completion with each step comprising of “art to part” cycle time, cost, and model fidelity for dimensions, performance, and cost. The primary focus of this demonstration was to determine if a 50% cost reduction was achievable, for each AM tooling-set, as compared to conventional processes. UDRI leveraged project partner SpinTech, who manufactures tools and parts in these categories and thus provided a baseline regarding current best practices and provided valuable feedback during the entirety of this demonstration. This demonstration primarily focused on the use of AM tooling for fabrication of three composite component structures which are typically utilized in aircraft and comprise salient geometric features of broad interest. These components are often tooling intensive and have features requiring extraction of male tools which are usually trapped by the geometry. The three structures selected by the team included: 1) A one-piece airfoil shell comprised of compound contours where male tooling would be trapped unless the part were manufactured in two halves as is typically the case. 2) A one-piece duct used for air handling, comprised of compound contours where male tooling would be trapped unless the part were manufactured in two halves, or a washout mandrel were to be used. 3) A co-cured C-channel stiffened skin where typically C-channels would be individually manufactured and then bonded to a cured skin. The demonstration was comprised of three main tasks: • Task 1: AM Tool Feasibility Study – ensure the AM tooling meets the performance requirements as specified by SpinTech to match baseline performance. • Task 2: Complex Tool Demonstration – Fabricate tooling, preforms, and parts representative of an airfoil and duct. • Task 3: Large Aerostructure Fabrication Demonstration – Fabricate tooling, preforms, and part representative of a C-channel stiffened skin. With the conclusion of this project, a decision tree was developed to determine the key considerations necessary to determine if use of AM tooling for the three selected structures was able to attain the same quality as historically achieved on metallic tooling, while providing a significant cost reduction.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Thermal analysis of combustion synthesis of FeAlxOy catalysts for dehydrogenation of fossil fuels

The growing demand for hydrogen as a clean energy carrier highlights the need for its alternative production method with reduced CO₂ emissions. Microwave-assisted thermocatalytic dehydrogenation of fossil fuels offers a promising solution for clean hydrogen production, with FeAlxOy nanocomposites acting as efficient catalysts due to their thermal stability, catalytic activity, and microwave-absorption properties. FeAlxOy nanocomposites, fabricated by solution combustion synthesis (SCS), have shown good microwave-absorption and catalytic properties. However, the effects of synthesis parameters such as fuel type and Fe:Al molar ratio on the SCS process and properties of the final material are not well understood. The SCS process involves vaporization of water, thermal decomposition of the mixture components, and oxidation – reduction reactions. In the present work, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) were utilized to study the SCS mechanism, with a focus on understanding decomposition processes. TGA provided insights into the thermal stability and mass loss profiles of the mixtures, while DSC quantified the heat release and identified reaction onset temperatures. Results demonstrated that the choice of fuel significantly influenced the thermal behavior and properties of FeAlxOy nanocomposites. Glycine-based mixtures exhibited superior thermal stability and complete decomposition in a single step with high heat release compared to citric acid-based mixtures, which required higher synthesis temperatures and experienced slower, two-step decomposition processes. These findings emphasize the effectiveness of glycine-fueled SCS in producing thermally stable and catalytically active FeAlxOy nanocomposites.

Martinez Espinoza, Laura Alejandra↗