Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxygen electrode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Microstructural Evolution and ORR Activity of Nanocolumnar Platinum Thin Films with Different Mass Loadings Grown by High Pressure Sputtering

Nanocolumnar platinum thin films (Pt-TFs) with different Pt mass loadings were grown by high pressure sputtering (HIPS) and investigated as oxygen reduction reaction (ORR) electrocatalysts for polymer electrolyte membrane fuel cell applications. Mass loading was controlled by changing the sputter deposition time. A cauliflower-like columnar microstructure was achieved by depositing the Pt-TFs onto a microporous layer (MPL)-like surface composed of carbon particles in order to mimic catalyst-coated gas diffusion electrodes. Microstructural evolution of HIPS Pt-TFs and their ORR activity were investigated. Electrochemical characterization of the nanocolumnar Pt-TFs was performed by cyclic voltammetry and rotating disk electrode measurements on Pt-TF/MPL-like-layer/glassy-carbon samples in an aqueous perchloric acid electrolyte. The electrochemically active surface area increased from 18 to 39 m 2 g –1 as the Pt mass loading was decreased. Specific activity of the films was similar (~600 μA cm –2 ) for all Pt mass loadings, due to the similar nanoparticle sizes of ~5 nm as observed by transmission electron microscopy and X-ray diffraction. Furthermore, mass activity of the films increased from 0.11 to 0.26 A mg –1 as the Pt mass loading was decreased, which is an indication of the effective Pt utilization and better access through the catalyst layer at lower Pt mass loadings.

08 HYDROGEN↗
DOE OSTI2021

Electronic tuning of confined sub-nanometer cobalt oxide clusters boosting oxygen catalysis and rechargeable Zn–air batteries.

Reasonable design of robust bifunctional oxygen catalysts from an electronic structure perspective is intriguing and challenging for the development of high active rechargeable zinc-air batteries (ZABs). In this study, the favorable regulation of the electronic structure of the cobalt oxide nanoclusters was firstly predicted by density functional theory (DFT) simulation, and then experimentally verified by confining sub-nanometer CoOx clusters (0.86 nm) into the small pore of ZIF-8 derived N-doped nanomaterials (PNC) using a microporous MOFs confinement strategy. The confined effect of the MOF micropores not only enhanced the stability of the subnanometer cobalt oxide clusters, but also make it coupled with Co-Nx to further regulate the electronic structure of the former, synergistic resulting in enhanced ORR/OER actives. As a result, the optimized 0.05CoOx@PNC catalyst demonstrates outstanding bifunctional oxygen performance with a smaller potential gap of 0.67 V. Moreover, the rechargeable Zn-air batteries integrated 0.05CoOx@PNC air cathode displays encouraging performance with a peak power density of 157.1 mW cm(-2), a specific capacity of 887 mAh g(Zn)(-1)at 10 mA cm(-2) and long-term cyclability for over 200 h, significantly outperforming the benchmark electrode couple consisted of Pt/C/RuO2. DFT calculation further revealed that reducing particle size and coupling with Co-N could effectively regulate the charge distribution of CoOx nanoclusters and downshift the D-band center of Co adsorption sites in CoOx nanoclusters, which reduced the reaction barrier of intermediate O-2* and OH* and ORR/ OER over potential, thus accelerating the overall ORR/OER kinetic process. This work offers a novel reference for the construction of a robust sub-nanometer cluster catalysts in the field of ZABs.

Bifunctional oxygen electrocatalysts↗
DOE OSTI2020

Electron and proton conductivity of Fe-N-C cathodes for PEM fuel cells: A model-based electrochemical impedance spectroscopy measurement

Impedance spectra of a PEM fuel cell with three Fe-N-C cathodes have been measured under the H 2 /N 2 testing regime. The spectra have been fitted using a recently developed physics-based impedance model, which takes into account finite proton ($σ_p$) and electron ($σ_e$) conductivity of the oxygen-free cathode catalyst layer. Fitting allowed to extract numerical data for $σ_p$, $σ_e$, the double layer capacitance, and the inductance of cables used for measuring impedance spectra. The values of σp and σe are close to what previously found for standard Pt/C electrodes, which is found for the first time using PGM-free catalysts. The method enables simultaneous measurement of reference proton and electron conductivity of PEMFC cathode.

25 ENERGY STORAGE↗
DOE OSTI2024

Comparative Study on the Photoelectrochemical Hydrogen Production from the Layout Optimization in a Unit Cell

Solar-driven water splitting is achieved by connecting photovoltaics with electrolysis. Recently, integrated approaches of the two configurations for photoelectrochemical reactions have shown great potential in a combined unit, but strategies to address further material and cell development face significant scientific challenges. Here, in this work, we present an experimental demonstration of photoelectrochemical (PEC) unit-cells with efficient separate dual compartments for oxygen evolution and hydrogen evolution reactions. The design and fabrication of cell architectures with various degrees of integration are investigated efficient and sustainable PEC processes. The effect of the nanostructured silicon (Si) photoelectrodes, including the adoption of layer architectures, surface protection layer deposition, and membrane electrode assembly is further studied to optimize the design parameters of the PEC unit-cells. This developed PEC cell with the Si photocathode achieved a photocurrent density of -4.8 mA cm –2 at -2.0 V cell and -2.87 mA cm –2 at -1.6 V cell . It clearly provides a critical milestone for unbiased solar water splitting. Practical solar to hydrogen (STH) can be directly estimated in investigating PEC performance in this unit-cell as assembled with a solar cell. It is a significantly meaningful step forward in practical solar fuel production.

08 HYDROGEN↗
DOE OSTI2021

Iridium metallene oxide for acidic oxygen evolution catalysis

Exploring new materials is essential in the field of material science. Especially, searching for optimal materials with utmost atomic utilization, ideal activities and desirable stability for catalytic applications requires smart design of materials’ structures. Herein, we report iridium metallene oxide: 1 T phase-iridium dioxide (IrO 2 ) by a synthetic strategy combining mechanochemistry and thermal treatment in a strong alkaline medium. This material demonstrates high activity for oxygen evolution reaction with a low overpotential of 197 millivolt in acidic electrolyte at 10 milliamperes per geometric square centimeter (mA cm geo –2 ). Together, it achieves high turnover frequencies of 4.2 s UPD –1 (3.0 s BET –1 ) at 1.50 V vs. reversible hydrogen electrode. Furthermore, 1T-IrO 2 also shows little degradation after 126 hours chronopotentiometry measurement under the high current density of 250 mA cm geo –2 in proton exchange membrane device. Theoretical calculations reveal that the active site of Ir in 1T-IrO 2 provides an optimal free energy uphill in *OH formation, leading to the enhanced performance. The discovery of this 1T-metallene oxide material will provide new opportunities for catalysis and other applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Transition metal vacancy and position engineering enables reversible anionic redox reaction for sodium storage

Triggering the anionic redox reaction is an effective approach to boost the capacity of layered transition metal (TM) oxides. However, the irreversible oxygen release and structural deterioration at high voltage remain conundrums. Herein, a strategy for Mg ion and vacancy dual doping with partial TM ions pinned in the Na layers is developed to improve both the reversibility of anionic redox reaction and structural stability of layered oxides. Both the Mg ions and vacancies (□) are contained in the TM layers, while partial Mn ions (~1.1%) occupy the Na-sites. The introduced Mg ions combined with vacancies not only create abundant nonbonding O 2p orbitals in favor of high oxygen redox capacity, but also suppress the voltage decay originated from Na–O–□ configuration. The Mn ions pinned in the Na layers act as “rivets” to restrain the slab gliding at extreme de-sodiated state and thereby inhibit the generation of cracks. The positive electrode, Na 0.67 Mn 0.011 [Mg 0.1 □ 0.07 Mn 0.83 ]O 2 , delivers an enhanced discharge capacity and decent cyclability. This study provides insights into the construction of stable layered oxide positive electrode with highly reversible anionic redox reaction for sodium storage.

Cai, Congcong [Wuhan Univ. of Technology (China)]↗
DOE OSTI2025

Demonstration of Electroreduction Technology to Convert GNF Uranium Oxide Powder to Metal

Global Nuclear Fuel – Americas LLC (GNF) has partnered with Argonne National Laboratory to demonstrate electroreduction of uranium oxides produced by deconversion of UF 6 to uranium metal through the Gateway for Accelerated Innovation in Nuclear (GAIN) program under the U.S. Department of Energy to accelerate the domestic production of metallic advanced reactor fuels. Electroreduction of uranium oxide was first demonstrated and patented by Argonne in the early 2000s as a technology to convert used oxide nuclear fuel from light water reactors to metal for further fuel reprocessing. More recently, electroreduction has been proposed as a front-end technology for metallization of uranium oxides produced by deconversion of UF 6 and for scrap recovery of oxide materials. During the electroreduction process, UO 2 powder is contained in a stainless-steel mesh basket with a cathode lead located in the center of the UO 2 bed. The basket is immersed in lithium chloride molten salt electrolyte containing 1 wt% lithium oxide along with a platinum anode and a nickel/nickel oxide (Ni/NiO) reference electrode. Current is applied to the cell between the cathode and anode to reduce the UO 2 to metallic uranium via a solid-state reduction reaction. Oxide ions released from the UO 2 during reduction are transported through the salt to the anode where oxygen gas is evolved. Once reduction is complete, the basket containing the metallicized uranium is removed from the salt and can be processed to remove the salt and consolidate the uranium into an ingot for use in metallic fuel fabrication. This project was performed to provide evidence of the electroreduction technology readiness level for metallization of UO 2 powder, identify and retire technical risks for industrialization of electroreduction, and accelerate the path to commercialization for metallic fast reactor fuel production. To that end, five electroreduction tests were performed with UO 2 provided by GNF and the resulting product was analyzed for the extent of conversion to metal and for impurity contents of the metal product to verify that electroreduction does not introduce impurities that would prevent use of the product in metallic fuel fabrication.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Regulating Catalytic Properties and Thermal Stability of Pt and PtCo Intermetallic Fuel-Cell Catalysts via Strong Coupling Effects between Single-Metal Site-Rich Carbon and Pt

Developing low platinum-group-metal (PGM) catalysts for the oxygen reduction reaction (ORR) in proton-exchange membrane fuel cells (PEMFCs) for heavy-duty vehicles (HDVs) remains a great challenge due to the highly demanded power density and long-term durability. Here, this work explores the possible synergistic effect between single Mn site-rich carbon (Mn SA -NC) and Pt nanoparticles, aiming to improve intrinsic activity and stability of PGM catalysts. Density functional theory (DFT) calculations predicted a strong coupling effect between Pt and MnN 4 sites in the carbon support, strengthening their interactions to immobilize Pt nanoparticles during the ORR. The adjacent MnN 4 sites weaken oxygen adsorption at Pt to enhance intrinsic activity. Well-dispersed Pt (2.1 nm) and ordered L1 2 -Pt 3 Co nanoparticles (3.3 nm) were retained on the Mn SA -NC support after indispensable high-temperature annealing up to 800 °C, suggesting enhanced thermal stability. Both PGM catalysts were thoroughly studied in membrane electrode assemblies (MEAs), showing compelling performance and durability. The Pt@Mn SA -NC catalyst achieved a mass activity (MA) of 0.63 A mg Pt –1 at 0.9 V iR-free and maintained 78% of its initial performance after a 30,000-cycle accelerated stress test (AST). The L1 2 -Pt 3 Co@Mn SA -NC catalyst accomplished a much higher MA of 0.91 A mg Pt –1 and a current density of 1.63 A cm –2 at 0.7 V under traditional light-duty vehicle (LDV) H 2 –air conditions (150 kPa abs and 0.10 mg Pt cm –2 ). Furthermore, the same catalyst in an HDV MEA (250 kPa abs and 0.20 mg Pt cm –2 ) delivered 1.75 A cm –2 at 0.7 V, only losing 18% performance after 90,000 cycles of the AST, demonstrating great potential to meet the DOE targets.

25 ENERGY STORAGE↗
DOE OSTI2026

Complex-Concentrated Anion Doping Enables Ultra-Stable Lattice Oxygen and Structural Integrity in Lithium-Rich Layered Oxide Cathodes

Lithium- and manganese-rich layered oxides (LMR) stand out as next-generation lithium-ion cathode chemistries, which harness both transition-metal and lattice-oxygen redox processes to deliver exceptional capacity and energy density. However, their full potential is hindered by intrinsic oxygen instability and structural degradation, resulting in pronounced voltage fade and capacity decay. Here, we present a complex-concentrated anion-doping paradigm in which multiple anions, F, Br, and S, are incorporated into the oxygen sublattice to enhance oxygen-redox and structural stability. X-ray absorption spectroscopy and aberration-corrected scanning transmission electron microscopy confirm ultra-stable local oxygen coordination environments during long-term cycling, with detrimental phase transformations and oxygen-loss-induced cavitation dramatically inhibited. Notably, we show that the characteristic LiTM6 transition metal (TM) honeycomb ordering is preserved even after electrochemical cycling. Concurrently, this strategy yields an unprecedented volume change of only 0.63% upon charging to 4.8 V vs. Li+/Li, achieving the first zero-strain LMR cathode. The resulting LMR cathode delivers ultralow voltage fade (1 mV per cycle during the first 100 cycles and becomes negligible in subsequent cycles) and outstanding energy retention (93% after 200 cycles) in a pouch cell configuration. Our complex-concentrated anion-doping concept establishes a broadly applicable strategy for resolving chemo-mechanical failure mechanisms in ceramic intercalation electrodes for next-generation energy storage.

Li-ion batteries↗
DOE OSTI2020

Mediated Fuel Cells: Soluble Redox Mediators and their Applications to Electrochemical Reduction of O2 and Oxidation of H2, Alcohols, Biomass, and Complex Fuels

Mediated fuel cells are electrochemical devices that produce power in a manner similar to that of conventional proton exchange membrane fuel cells (PEMFCs). They differ from PEMFCs in their use of redox mediators dissolved in liquid electrolyte to conduct oxidation of the fuel or reduction of the oxidant, typically O2, in bulk solution. The mediators transport electrons (and often protons) between the electrode and the catalysts or chemical reagents in solution. This strategy can help overcome many of the challenges associated with conventional fuel cells, including managing complex multi-phase reactions (as in O2 reduction) or the use of challenging or heterogeneous fuels, such as hydrocarbons, polyols and biomass. Mediators are also commonly used in enzymatic fuel cells, where direct electron transfer from the electrode to the enzymatic active site can be slow. This review provides a comprehensive survey of historical and recent mediated fuel cell efforts, including applications using chemical and enzymatic catalysts. Our research on in this field has been exploring a number of different topics and has been supported different funding sources: the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences (molecular mediators for catalytic oxygen reduction); the Great Lakes Bioenergy Research Center, DOE Office of Science DE-SC0018409 (research on biomass-based fuels; U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Catalysis Program, DE-FG02-05ER15690 (copper-catalyzed oxidation reactions); and the NIH NIGMS, R01 GM100143 and R35 GM134929 (use of molecular mediators for organic chemical synthesis).

Anson, Colin W.↗
DOE OSTI2021

NREL's HydroGEN Photoreactor Platform Design and Characterization

This technical report details the design, fabrication, and construction of a flow-through photoreactor developed at The National Renewable Energy Laboratory (NREL). The photoreactor is designed to facilitate indoor or outdoor testing on photoelectrochemical or integrated solar water splitting devices. The photoreactor design described here is based on a previous demonstration. The photoreactor version described herein contains several advanced design features that include: 1) Chassis-chuck two-part design, 2) Separable counter electrode compartments (here, the counter electrodes are anodes), 3) Reduced electrode separation to reduce electrolyte resistance, 4) Improved flow pattern for bubble removal, 5) Mounting for spectroradiometer receptor, 6) Fresnel lens and collimating tube attachments. The photoreactor presented here was designed primarily to accommodate photocathode materials in an illuminated compartment and a dark anode as the oxygen evolution catalyst. The build materials were thus chosen to for acid electrolyte compatibility. Other embodiments could accommodate a photoanode with dark hydrogen evolution catalyst and other build materials for alkaline compatibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Non‐aqueous H 3 PO 4 Electrolyte Enables Stable Cycling of Proton Electrodes

Abstract A non‐aqueous proton electrolyte is devised by dissolving H 3 PO 4 into acetonitrile. The electrolyte exhibits unique vibrational signatures from stimulated Raman spectroscopy. Such an electrolyte exhibits unique characteristics compared to aqueous acidic electrolytes: 1) higher (de)protonation potential for a lower desolvation energy of protons, 2) better cycling stability by dissolution suppression, and 3) higher Coulombic efficiency owing to the lack of oxygen evolution reaction. Two non‐aqueous proton full cells exhibit better cycling stability, higher Coulombic efficiency, and less self‐discharge compared to the aqueous counterpart.

Xu, Yunkai↗
DOE OSTI2020

A Non-aqueous H 3 PO 4 Electrolyte Enables Stable Cycling of Proton Electrodes

A non-aqueous proton electrolyte is devised by dissolving H 3 PO 4 into acetonitrile. The electrolyte exhibits unique vibrational signatures from stimulated Raman spectroscopy. Such an electrolyte exhibits unique characteristics compared to aqueous acidic electrolytes: 1) higher (de)protonation potential for a lower desolvation energy of protons, 2) better cycling stability by dissolution suppression, and 3) higher Coulombic efficiency owing to the lack of oxygen evolution reaction. Two non-aqueous proton full cells exhibit better cycling stability, higher Coulombic efficiency, and less self-discharge compared to the aqueous counterpart.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structure and lithium insertion in oxides of molybdenum

Oxides of molybdenum, MoO x , have a rich structural chemistry arising from the accommodation of oxygen deficiency as MoO 3 is reduced and varied redox behavior arising from the ability of Mo to take on several different oxidation states. We review MoO 3 , MoO 2 , and all the reduced Mo oxides with intermediate compositions for their performance as Li-ion battery electrode materials. These reduced oxides are perhaps the most structurally diverse in the field of energy storage materials, taking on structures ranging from ones with crystallographic shear to bronze-like structures and distorted rutile. The crystal structure can have a significant impact on the performance of battery materials, which makes the reduced Mo oxides a promising domain of study. Electrochemical studies of these oxides from as early as 1971 to as recently as 2022 are compiled, and characteristics of capacity, capacity retention, and rate performance are compared. We find that certain oxides indeed display promising and highly reversible capacities for Li + storage. Typical redox voltages for Mo oxides lie in a regime that hinders maximizing energy density when they are paired with higher-voltage cathodes or lower-voltage anodes. The possibility of decreasing the redox voltage in the future will expand the promise of these materials while offering an alternative to more critical elements such as Nb.

25 ENERGY STORAGE↗
DOE OSTI2025

Recent Developments in Lithium-Manganese-Nickel Oxide Electrochemistry: The Alchemy of LiMn 0.5 Ni 0.5 O 2

Efforts have been underway for some time at Argonne National Laboratory to design structurally integrated and stabilized lithium-manganese-nickel-oxide cathode materials. The goal has been to find a cobalt-free, high-capacity cathode for a Li-ion battery that is competitive, both cost- and energy-wise, with lithium-nickel-manganese-cobalt-oxide (NMC) and lithium-iron-phosphate (LFP) products. This brief synopsis highlights the remarkable alchemy of LiMn 0.5 Ni 0.5 O 2 resulting from its well-known, slightly disordered layered structure and the recently discovered lithiated spinel phase and totally disordered rock-salt configurations. All three arrangements share a structurally compatible cubic-close-packed oxygen array. The lithiated spinel and layered components provide an intersecting network of two- and three-dimensional channels that facilitate Li + -ion transport, while a minor amount of an extensively disordered rock-salt component likely serves to enhance the structural and electrochemical stability of the electrode. The synopsis also encompasses the historical development of lithiated spinel electrode materials and structurally integrated systems.

Thackeray, Michael M. [Argonne National Laboratory↗
DOE OSTI2020

High accuracy in-situ direct gas analysis of Li-ion batteries

Cycling of lithium-ion batteries containing Ni-rich NMC cathodes at high voltage involves intense gas generation. From the safety standpoint, it is critical to understand how different gas species respond to changes of upper cut-off voltages. In this manuscript, we introduce a novel experimental set up for real-time analysis of gas generation in prismatic pouch cells. In a typical experiment, a lithium-ion pouch cell is directly connected to a quadruple mass spectrometer by glass capillary. Pressure difference helps move the generated gases to the mass spectrometer column for full analysis. The gaseous species are probed during both formation cycle and aging cycles in Li-ion pouch cells comprising NMC811 cathode and graphite anode. The gases are generated upon the creation of the solid electrolyte interphase on graphite during the first formation charge. Besides ethylene gas, C 2 H 4 , whose occurrence is related to the decomposition of ethylene carbonate, a minor solvent decomposition happened at a lower voltage is demonstrated to be associated with residue water on the electrode. For aging cycles, three upper cut-off voltages have been selected to investigate the gas evolution behavior upon charging to 4.2, 4.4 and 4.6 V. Higher upper cut-off voltages do not affect the amount of O 2 measured as a part of the generated oxygen could have reacted with electrolytes. Quite similar and low amounts of O 2 remain in the cells upon charging to the selected cut-off voltages. On the other hand, the generation of CO 2 has been found to be very sensitive to upper cut-off voltage. During similar aging cycles, 6167 nmol $g_{NMC}^{-1}$ of CO 2 is generated at 4.6 V, versus 1650 nmol $g_{NMC}^{-1}$ of CO 2 at 4.4 V, versus 91 nmol $g_{NMC}^{-1}$ of CO 2 at 4.2 V.

25 ENERGY STORAGE↗
DOE OSTI2020

Oligomeric Ruthenium Polypyridyl Dye for Improved Stability of Aqueous Photoelectrochemical Cells

Water-splitting dye-sensitized photoelectrochemical cells rely on molecular sensitizers to harvest light energy and drive the catalytic reactions necessary to generate hydrogen and oxygen from water. The desorption of sensitizer molecules from the semiconductor–aqueous electrolyte interface is a significant barrier to the practical implementation of these cells. To address this problem, we synthesized an oligomeric ruthenium dye ([RuP] n ) that has dramatically improved stability as a photosensitizer for TiO 2 electrodes over the pH range of interest (4–7.8) for DSPECs. Additionally, the efficiency of photoelectrochemical charge separation is known to depend on the rate of cross-surface hole diffusion between dye molecules. The oligomeric dye ([RuP] n ) shows an order of magnitude faster cross-surface hole diffusion than the commonly used monomeric [Ru(bpy) 2 (4,4-PO 3 H 2 ) 2 bpy] 2+ (RuP) sensitizer. Finally, the enhanced stability of the polymeric dye also enables the use of intensity-modulated photovoltage spectroscopy to measure the recombination rate of photogenerated electrons and holes as a function of electrolyte pH.

14 SOLAR ENERGY↗
DOE OSTI2025

Titanium nitride prepared by the urea-glass synthesis gives an active electrocatalyst for the oxygen reduction reaction

Rock-salt-structured titanium nitride (TiN) has emerged as a leading earth-abundant electrocatalyst for the oxygen reduction reaction (ORR). We compare TiN prepared in three ways starting from urea: the urea–glass method, by a direct reaction between urea and titanium(IV) chloride, and through a discrete monomeric complex. In the urea-glass route, a new-found [Ti 4 (µ-O) 6 (OC(NH 2 ) 2 ) 12 ] 4+ oxo-bridged titanium–urea precursor can be synthesized in a single-pot reaction at room temperature starting from titanium(IV) chloride, urea, and ethanol with a urea-to-titanium ratio of 6. Subsequent annealing of the polymeric gel that results at 750 °C in an N 2 atmosphere yields phase-pure, TiN particles on the 100 µm size scale. TiN can be deposited as an ink with PiperlON®anion exchange dispersion onto a glassy carbon rotating disk electrode (RDE), and of the three synthesis methods, the urea-glass method gives the most active ORR catalyst. The onset potential for ORR activity is −131 mV vs. Hg/HgO, and Koutecký–Levich analysis of linear-sweep voltammetry recorded at varying rotation rates supports a two-electron reduction pathway to H 2 O 2 , with a rate constant of 0.0172 cm s −1 . The higher activity is ascribed to a more oxygen-rich surface—boh defect sites and active oxygen species—afforeded by the oxo-bridged precursor, corrorborated by X-ray photoelectron spectroscopy (XPS) analysis.

Xie, Wanrui [University of Michigan, Ann Arbor, MI↗