Accelerated gradient projection technique with application to rocket trajectory optimization
Accelerated gradient projection method applied to rocket trajectory optimization for minimizing fuel required for placing payload in circular orbits
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Accelerated gradient projection method applied to rocket trajectory optimization for minimizing fuel required for placing payload in circular orbits
A stochastic projected gradient algorithm is proposed which can be used for finding a constrained optimum point for a concave or convex objective function subject to nonlinear constraints which form a connected region even when only a noisy estimate of the objective function is available. For a constraint described by a single linear equation, convergence to the constrained optimum value is proved, and the rate of convergence of the algorithm to the constrained optimum value is determined. The algorithm is applied to the nonlinear problem of obtaining automatically an array of detectors which forms a beam in a desired direction in space in the presence of interfering noise so as to maximize the SNR subject to a constraint on the super-gain ratio.
Minimum fuel, three dimensional flightpaths for commercial jet aircraft are discussed. The theoretical development is divided into two sections. In both sections, the necessary conditions of optimal control, including singular arcs and state constraints, are used. One section treats the initial and final portions (below 10,000 ft) of long optimal flightpaths. Here all possible paths can be derived by generating fields of extremals. Another section treats the complete intermediate length, three dimensional terminal area flightpaths. Here only representative sample flightpaths can be computed. Sufficient detail is provided to give the student of optimal control a complex example of a useful application of optimal control theory.
This paper explores a number of techniques which are capable of reducing vibration levels in rotorcraft by redistributing the mass and stiffness properties of the structure. First, vibration reduction in the rotor is considered by using formal structural optimization for ensuring optimal frequency placement. Two cases are considered: in the first case aeroelastic constraints are not enforced and the blade is designed for minimum weight; in the second case aeroelastic constraints are enforced and vibration levels are minimized in forward flight. Next, vibration reduction in the fuselage is considered and the various methods available for vibration reduction by local structural modification are reviewed. The feasibility of combining local structural modification with modern structural optimization is discussed and some extensions of previous research are suggested.
The helicopter rotor model consists of a four bladed hingeless rotor attached to a fuselage. The helicopter is assumed to be in trimmed forward flight. Each blade is assumed to have flap, lag, and torsional degrees of freedom. The fuselage degrees of freedom are not included in the analysis. Thus the aeroelastic stability and response analysis upon which this study is based is an isolated blade analysis. The helicopter rotor vibration reduction problem expressed as a general class of structural synthesis problems is given.
This report examines tuning a finite element model using vector optimization techniques. Structural models using finite element theory often need to be adjusted so they can accurately simulate the real structure. The goal is to tune the model such that it will reproduce data derived from structural tests. First, the performance indices are extremized using multiple objective optimization theory, producing a set of possible solutions. Next, the solutions are rank ordered according to a decision maker's preferences to select the best answer. The tuning process was applied to a T-38 horizontal stabilizer. Numerous weighted solutions contained a best static deformation model, a best frequency model and three intermediate combinations of these two models. This automated procedure proved to be a versatile method capable of producing solutions for many types of tuning problems.
NASA-Langley has been conducting and sponsoring research in airborne energy management for a number of years. During the course of this research, two fundamental techniques for the generation of 4D (fixed time) descent trajectories have emerged as viable candidates for advanced flight management systems. The first technique utilizes speed schedules of constant Mach number transitioning to constant calibrated airspeed chosen empirically to produce minimum fuel usage. The second technique computes cost optimized speed schedules of variable airspeed developed through application of optimal control theory. Both techniques have been found to produce reasonable and flyable descent trajectories. The formulation of the algorithms for each technique is evaluated and their suitability for operations in realistic conditions is discussed. Operational factors considered include: airplace speed, thrust, and altitude rate constaints; wind, temperature, and pressure variations; Air Traffic Control altitude, speed, and time constaints; and pilot interface and guidance considerations. Time flexibility, fuel usage, and airborne computational requirements were the primary performance measures.
The scope of this study covered steady-state, continuous-time vibration control under disturbances applied to the Space Shuttle and continuous-time models of actuators, sensors, and disturbances. Focus was on a clear illustration of the methodology, therefore sensor/actuator dynamics were initially ignored, and a finite element model of the NASA Spacecraft Control Laboratory Experiment (SCOLE) was conducted, including products of inertia and offset of reflector CM from the mast tip.
The space power system has two sources of energy: photo-voltaic blankets and batteries. The optimal power management problem on-board has two broad operations: off-line power scheduling to determine the load allocation schedule of the next several hours based on the forecast of load and solar power availability. The nature of this study puts less emphasis on speed requirement for computation and more importance on the optimality of the solution. The second category problem, on-line power rescheduling, is needed in the event of occurrence of a contingency to optimally reschedule the loads to minimize the 'unused' or 'wasted' energy while keeping the priority on certain type of load and minimum disturbance of the original optimal schedule determined in the first-stage off-line study. The computational performance of the on-line 'rescheduler' is an important criterion and plays a critical role in the selection of the appropriate tool. The Howard University Center for Energy Systems and Control has developed a hybrid optimization-expert systems based power management program. The pre-scheduler has been developed using a non-linear multi-objective optimization technique called the Outer Approximation method and implemented using the General Algebraic Modeling System (GAMS). The optimization model has the capability of dealing with multiple conflicting objectives viz. maximizing energy utilization, minimizing the variation of load over a day, etc. and incorporates several complex interaction between the loads in a space system. The rescheduling is performed using an expert system developed in PROLOG which utilizes a rule-base for reallocation of the loads in an emergency condition viz. shortage of power due to solar array failure, increase of base load, addition of new activity, repetition of old activity etc. Both the modules handle decision making on battery charging and discharging and allocation of loads over a time-horizon of a day divided into intervals of 10 minutes. The models have been extensively tested using a case study for the Space Station Freedom and the results for the case study will be presented. Several future enhancements of the pre-scheduler and the 'rescheduler' have been outlined which include graphic analyzer for the on-line module, incorporating probabilistic considerations, including spatial location of the loads and the connectivity using a direct current (DC) load flow model.
Electrical actuator systems are being pursued as alternatives to hydraulic systems to reduce maintenance time, weight and costs while increasing reliability. Additionally, safety and environmental hazards associated with the hydraulic fluids can be eliminated. For most actuation systems, the actuation process is typically pulsed with high peak power requirements but with relatively modest average power levels. The power-time requirements for electrical actuators are characteristic of pulsed power technologies where the source can be sized for the average power levels while providing the capability to achieve the peak requirements. Among the options for the power source are battery systems, capacitor systems or battery-capacitor hybrid systems. Battery technologies are energy dense but deficient in power density; capacitor technologies are power dense but limited by energy density. The battery-capacitor hybrid system uses the battery to supply the average power and the capacitor to meet the peak demands. It has been demonstrated in previous work that the hybrid electrical power source can potentially provide a weight savings of approximately 59% over a battery-only source. Electrochemical capacitors have many properties that make them well-suited for electrical actuator applications. They have the highest demonstrated energy density for capacitive storage (up to 100 J/g), have power densities much greater than most battery technologies (greater than 30kW/kg), are capable of greater than one million charge-discharge cycles, can be charged at extremely high rates, and have non-explosive failure modes. Thus, electrochemical capacitors exhibit a combination of desirable battery and capacitor characteristics.
InGaAs APDs with improved photon counting characteristics were designed and fabricated and their performance improvements were observed. Following the results, a 4x4 individually addressable APD array was designed, fabricated, and results are reported.
Explore the source record for details and available documents.
As National Airspace System (NAS) is going through the Digital Transformation journey, data science and analytics methods can significantly contribute to improving the traditional physics-based decision-making tools. The adoption of AI/ML methods will not only help accelerate Federal Aviation Administration (FAA)’s vision of Info-centric NAS but also contribute to the overall objective of sustainable aviation. AI/ML can improve the ground and airspace operations by enhancing the accuracy of current decision-making tools used by the airlines and the FAA to manage traffic on the ground and in the air. Huge amount of data that gets collected during a flight. AI/ML methods can extract information from this data and provide valuable insights to make better operational decisions. NASA has partnered with the FAA and commercial airlines such as American and Southwest Airlines on this effort and has successfully demonstrated the benefits of using ML in real world environment by reducing delays and optimizing ground operations at the US airports. In 2022 itself, NASA demonstrated real-world benefits (over 24K lbs. of fuel savings, over 76.6K lbs. CO2 emission savings, and several hours of delay savings) by deploying ML based prediction models to optimize ground operations at Dallas/Fort Worth International and Dallas Love Field Airports in Texas. These tools are being deployed on the cloud for broader deployment, adaptability, and scalability. NASA is developed a reference implementation of the cloud-based platform to significantly lower the bar to development and distribution of these digital services for aviation. In this talk, I will share information about the Digital Information Platform project, the novel AI/ML based approaches used for optimizing ground operations and the opportunities to partner with NASA on these demonstrations.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Abstract not provided.