Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “models and simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Modeling and Simulation of Xe-100-type Pebble Bed Gas-Cooled Reactor with SCALE

The US Department of Energy (DOE) announced the Advanced Reactor Demonstration Program (ARDP) to accelerate the deployment of advanced reactor concepts. Awardees of ARDP funds are expected to demonstrate the operation of an advanced reactor within 7 years of receiving the award. X-Energy’s advanced reactor concept, the Xe-100, was selected as one of two advanced reactor concepts to receive funding to demonstrate the operation of its high-temperature gas-cooled pebble-bed reactor before the end of this decade. As a result of this push to bring advanced reactors to maturation and commercialization, transition and deployment scenario studies are being performed under the Systems Analysis and Integration (SA&I) campaign within the DOE Office of Nuclear Energy (DOE-NE) to evaluate the transition of the current US commercial fleet of light-water reactors (LWRs) to a future fleet of advanced reactors consisting of a mix of ARDP type reactor concepts and advanced LWRs. To accurately evaluate the front- and back-end resource requirements, it is important to perform reactor physics calculations to determine the discharge burnup and isotopic content, fuel residence time, as well as other parameters. For this purpose, a summer project funded by the SA&I campaign allowed for the setup of SCALE models for full-core Xe-100 type high-temperature gas-cooled pebble-bed reactor and a Xe-100 type slice using publicly available information. The core-averaged equilibrium compositions and zone-wise equilibrium compositions for the slice and 3D models, respectively, were obtained following an iterative depletion method developed by Bostelmann et al. using SCALE’s reactor physics sequence TRITON. The slice model was used with TRITON to generate burnup-dependent cross section libraries at different temperatures which can be used with SCALE’s ORIGAMI code to rapidly determine fuel inventory and therefore to perform quick sensitivity studies on parameters such as the pebble location in the core. The SCALE/TRITON transport and depletion calculation for the Xe-100 type slice model indicates that the isotopic concentrations are in good agreement at 1,300 effective full power days (EFPD) for 235 U. An analysis of 236 U results match 239 Pu results would seem to indicate a typographical error in Mulder and Boyes wherein the reported results of 236 U and 239 Pu are reversed. In addition to SCALE/TRITON calculations, a new capability within SCALE/ORIGAMI for the simulation of pebble-bed reactors was used to study the burnup sensitivity with respect to the pebble pathway through the core. The SCALE/ORIGAMI results show that pebbles that travel closer to the reflector for the entire depletion history have a higher burnup than pebbles that travel through the middle of the core because of the higher thermal to fast flux ratio near the reflector. Consequently, a pebble’s burnup is strongly affected by the pebble’s pathway for each pass. Additional phenomena such as temperature distributions in the core and different travel times of the pebbles in the individual radial zones further affect the burnup distribution. The sensitivity of the discharge vector to the pebble pathways taken during each pass can be evaluated in the future using SCALE/ORIGAMI now that the SCALE inputs have been established.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Dependence of Convective Cloud Microphysical Properties on Environmental Conditions during the TRACER and ESCAPE Field Campaigns: A Synergistic Approach of Observations, Machine Learning and Parcel Models

The sensitivity of convective clouds to aerosols and their interactions with environment, combined with limited observational constraints in parameterizations, introduces significant uncertainties in atmospheric models. Here, this study investigates the dependence of convective cloud microphysical properties on environmental conditions using a synergistic approach that combines unique observations from the TRACER and ESCAPE field campaigns, machine learning techniques, and parcel model simulations with a super-droplet microphysics scheme. A random forest algorithm identifies in-situ vertical velocity (w), temperature (T), and surface fine-mode aerosol mass concentration as the three most important environmental conditions influencing cloud properties including liquid water content (LWC), number concentration for particles with D max < 50 μm (N c ,<50), 50 μm ≤ D max ≤ 3000 μm (N c,50–3000 ), and droplet effective diameter (D e ). Results show that LWC, N c,<50 , and N c,50–3000 significantly increase with w in updrafts. Across w bins, as T decreases, LWC, D e , and N c,50–3000 increase, while N c,<50 decreases, which are closely linked to the distance above cloud bases. Warmer cloud bases yield higher LWC, greater N c,50–3000 , and smaller N c,<50 , while polluted environments produce greater N c,<50 . Parcel model simulations successfully replicate these observed dependencies. The simulation results indicate that warmer cloud bases enhance condensation generating larger droplets, and differences in droplet sizes are then amplified through collision-coalescence, resulting in a greater N c,50–3000 . Polluted conditions result in a greater N c,<50 primarily due to enhanced cloud condensation nuclei activation despite increased collision-coalescence rates compared to pristine conditions. This study provides observed quantitative patterns characterizing cloud microphysical properties as a function of key environmental parameters, offering valuable constraints for improving physics parameterizations and numerical models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Leveraging generative artificial intelligence to bridge domain gaps in wind turbine research

A central challenge in wind turbine health monitoring is the scarcity of real-world data due to limited instrumentation, leading researchers to rely on simulation models that often suffer from reduced fidelity. However, even within simulation environments, discrepancies arise because of modeling assumptions, and configuration fidelities, creating domain gaps that limit the transferability of learned representations. Here, to investigate domain translation under controlled conditions, this project explores the use of generative artificial intelligence, specifically cycle-consistent generative adversarial networks (CGANs), to bridge the gap between OpenFAST simulation models representing 1.5 MW and 5 MW wind turbines. A physics-informed CGAN architecture is introduced, where a simplified turbine tower dynamics model is incorporated into the training loss to ensure physically consistent outputs. Quantitative results showed moderate to high agreement in frequency-domain features. Incorporating the physics-informed loss function improved the R 2 values by 30%, reduced the RMSE from 1.39 to 1.1 m/s 2 , and reduced training time by 82%. Furthermore, under increased turbulence intensity (IEC Category A), the RMSE remained stable at approximately 1.1 m/s 2 . While the present study is entirely simulation-based, it establishes a pipeline for evaluating physics-informed generative domain translation, which may serve as a foundation for future simulation-to-reality validation studies.

17 WIND ENERGY↗
DOE OSTI2021

An Overview of Atmospheric Features Over the Western North Atlantic Ocean and North American East Coast - Part 1: Analysis of Aerosols, Gases, and Wet Deposition Chemistry

The Western North Atlantic Ocean (WNAO) and adjoining East Coast of North America are of great importance for atmospheric research and have been extensively studied for several decades. This broad region exhibits complex meteorological features, diverse cloud types, and a wide range of conditions associated with gas and particulate species that originate from many sources regionally and from other continents. As Part 1 of a 2-part paper series, this work provides a characterization of quantities associated with atmospheric chemistry, including gases, aerosols, and wet deposition, based on satellite observations, ground-based data, model simulations, and reanalysis products. Key results include spatial and seasonal differences in composition along the North American East Coast and over the WNAO associated with varying sources of smoke and dust and meteorological drivers such as temperature, moisture, and precipitation. Spatial and seasonal variations of tropospheric carbon monoxide and ozone highlight different pathways towards accumulation of these species in the troposphere. Spatial distributions of speciated aerosol optical depth and vertical profiles of aerosol mass mixing ratios show a clear seasonal cycle highlighting the influence of both natural and anthropogenic sources in addition to the impact of intercontinental transport on their vertical profiles. Analysis of long-term climate model simulations of aerosol species and satellite observations of carbon monoxide confirm that there has been a significant decline in recent decades among anthropogenic constituents owing to regulatory activities. The results can inform current and future lines of research for the region.

Corral, Andrea↗
DOE OSTI2023

Evaluation of Digital Twin Modeling and Simulation

A digital twin has intelligent modules that continuously monitor the condition of the individual components and the whole of a system. Digital twins can provide nuclear power plants (NPP) operators an unprecedented level of monitoring, control, supervision, and security by contributing a greater volume of data for more comprehensive data analysis and increased accuracy of insights and predictions for decision making throughout the entire NPP lifecycle. NPP operators and managers have historically relied on limited, second hand or incomplete data. With proper implementation, digital twins can provide a central hub of all intel that allows for a multidisciplinary view of an NPP. This equips operators and managers with the ability to have more information, context, and intel that can be used for greater granularity during planning and decision making. Digital twins can be used in many activities as the technology has many different concepts surrounding it. From the various definitions of a digital twin within the industry, digital twins can be differentiated by levels of integration/automation. The three main models include digital model, digital shadow, and digital twin. Digital twins offer many potential advancements to the nuclear industry that could reduce costs, improve designs, provide safer operation, and improve their overall security.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Data for: Time to anoxia: Observations and predictions of oxygen drawdown following coastal flood events

This dataset contains data and code associated with the paper Patel et al. "Time to anoxia: Observations and predictions of oxygen drawdown following coastal flood events".The coastal terrestrial-aquatic interface (TAI) is a highly dynamic system characterized by strong physical, chemical, and biological gradients. In particular, shifting soil redox conditions and consumption of terminal electron acceptors, due in part to dynamic hydrologic conditions, is a strong driver of carbon availability and transformations across TAIs. However, while redox dynamics are well described, our ability to quantitatively forecast rates of oxic to anoxic shifts in soils with different characteristics and inundation regimes is limited. We integrated field measurements, laboratory incubations, and model simulations to improve mechanistic understanding of oxygen consumption dynamics in coastal soils. Continuous in situ monitoring unexpectedly revealed that flooding caused temporary spikes in subsurface dissolved oxygen followed by rapid consumption in the wetlands. To further investigate these mechanisms in a controlled setting, we performed laboratory incubations using surface and subsurface soils from a TAI gradient (defined here as upland forest to transitional forest to wetland) in Western Lake Erie to measure oxygen consumption rates in TAI soils during flood events. In our experiments, wetland soils reached anoxia the fastest, in ∼ 9 h on average, whereas upland soils turned anoxic in ∼ 18 h. Subsurface upland soils did not turn anoxic even after two weeks of saturation in the lab, and their oxygen consumption patterns suggested carbon and/or nutrient limitation. These results are consistent with in-situ groundwater redox and oxygen measurements in the field, where wetland soils exhibited the highest rates of oxygen consumption along the TAI. Model simulations of oxygen consumption suggested that oxygen consumption had stronger abiotic controls in wetland soils but stronger biotic controls in upland soils, providing a useful framework for future incubation experiments. Microbial activity is a strong driver of oxygen consumption in TAI soils, although it is constrained by the availability of dissolved carbon in subsurface soils.This dataset contains a compressed (.zip) archive of the data and R scripts used for this manuscript. The dataset includes files in .csv format, which can be accessed and processed using MS Excel or R. This archive can also be accessed on GitHub at https://github.com/COMPASS-DOE/cmps-time_to_anoxia (DOI: 10.5281/zenodo.10815374).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

CGOLS V: Disk-wide Stellar Feedback and Observational Implications of the Cholla Galactic Wind Model

Abstract We present the fifth simulation in the Cholla Galactic OutfLow Simulation (CGOLS) project—a set of isolated starburst galaxy simulations modeled over large scales (10 kpc) at uniformly high resolution (Δx≈ 5 pc). Supernova feedback in this simulation is implemented as a disk-wide distribution of clusters, and we assess the impact of this geometry on several features of the resulting outflow, including the radial profiles of various phases; mass, momentum, and energy outflow rates; covering fraction of cool gas; mock absorption-line spectra; and X-ray surface brightness. In general, we find that the outflow generated by this model is cooler, slower, and contains more mass in the cool phase than a more centrally concentrated outflow driven by a similar number of supernovae. In addition, the energy loading factors in the hot phase are an order of magnitude lower, indicating much larger losses due to radiative cooling in the outflow. However, coupling between the hot and cool phases is more efficient than in the nuclear burst case, with almost 50% of the total outflowing energy flux carried by the cool phase at a radial distance of 5 kpc. These physical differences have corresponding signatures in observable quantities: the covering fraction of cool gas is much larger, and there is greater evidence of absorption in low and intermediate ionization energy lines. Taken together, our simulations indicate that centrally concentrated starbursts are more effective at driving hot, low-density outflows that will expand far into the halo, while galaxy-wide bursts may be more effective at removing cool gas from the disk.

Astronomy & Astrophysics↗
DOE OSTI2021

The Cell Utilized Partitioning Model as a Predictive Tool for Optimizing Counter-Current Chromatography Processes

Counter-current chromatography (CCC) is capable of unique elution modes that isolate analytes using the movement of the stationary phase in addition to moving the mobile phase. These modes include elution-extrusion CCC (EECCC) and dual-mode CCC (DM CCC) that are not possible in traditional solid-liquid chromatography systems. Although EECCC and DM CCC are widely used to recover highly retained components, to our knowledge, optimizing the elution process in these modes with predictive models has not been reported. To address this gap, we developed a predictive model for CCC dubbed the Cell Utilized Partitioning (CUP) model. The CUP model accurately predicts the effluents of multicomponent separations in EECCC and DM CCC modes when compared to experimental data. Furthermore, CUP model simulations were extended to investigate the influence of operating and intrinsic parameters on the yield and productivity, and to compare the separation performances of EECCC and DM CCC in various conditions. The results demonstrate that low distribution constants, usually a KD less than 1, and a selectivity > 1.3, under specific flowrate ranges, increase both productivity and yield. From these results, generalized optimization and scaleup guidelines are proposed that can apply to research settings and to industrial processes to maximize preparative CCC performance.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2024

How Does Vertical Wind Shear Influence Updraft Characteristics and Hydrometeor Distributions in Supercell Thunderstorms?

Abstract Vertical wind shear is known to affect supercell thunderstorms by displacing updraft hydrometeor mass downshear, thereby facilitating the storms’ longevity. Shear also impacts the size of supercell updrafts, with stronger shear leading to wider, less dilute, and stronger updrafts with likely greater hydrometeor production. To more clearly define the role of shear across different vertical layers on hydrometeor concentrations and displacements relative to supercell updrafts, a suite of idealized numerical model simulations of supercells was conducted. Shear magnitudes were systematically varied across the 0–1, 1–6, and 6–12 km AGL layers, while the thermodynamic environment was held fixed. Simulations show that as shear magnitude increases, especially from 1 to 6 km, updrafts become wider and less dilute with an increase in hydrometeor loading, along with an increase in the low-level precipitation area/rate and total precipitation accumulation. Even with greater updraft hydrometeor loading amid stronger shear, updrafts are more intense in stronger shear simulations due to larger thermal buoyancy owing to wider, less dilute updraft cores. Furthermore, downshear hydrometeor displacements are larger in environments with stronger 1–6-km shear. In contrast, there is relatively less sensitivity of hydrometeor concentrations and displacements to variations in either 0–1- or 6–12-km shear. Results are consistent across free tropospheric relative humidity sensitivity simulations, which show an increase in updraft size and hydrometeor mass with increasing free tropospheric relative humidity owing to a reduction in entrainment-driven dilution for wider updrafts in moister environments. Significance Statement Rotating thunderstorms, known as supercells, are able to persist for multiple hours. One common explanation is that large changes in wind speed and/or direction with height, or shear, transport rain/hail away from supercell updrafts, supporting their maintenance. The strong shear within supercell environments, however, may also lead to greater rail/hail amounts, thereby leading to weaker storms due to this extra mass of water/ice within updrafts. Furthermore, the impact of shear across different height layers on supercell rain/hail characteristics has not been thoroughly investigated. In this study, computer simulations of supercells were conducted to determine that shear occurring between 1 and 6 km above ground level has a large impact on rain/hail distribution in supercells and that stronger shear in this layer leads to wider/stronger supercells with greater rain/hail accumulations at the surface. Additionally, some of the extra mass of water/ice is transported farther away from updrafts due to the stronger environmental storm-relative winds.

Meteorology & Atmospheric Sciences↗
DOE OSTI2025

Demographic Microsimulator for Integrated Urban Systems: Adapting Panel Survey of Income Dynamics to Capture the Continuum of Life

Agent-based models (ABMs) in transportation modeling simulate activity and travel decisions at the disaggregate level of households and individuals. To do this, ABMs require detailed and realistic information on agents’ socioeconomic and demographic characteristics. Various synthetic population generators have been proposed to address this need. However, most of those currently in practice are cross-sectional in nature and do not account for the dynamics within households and individuals as they progress through life events over time. This is a major shortcoming, as literature has shown that transportation decisions are affected by the transition between and co-occurrence of life cycle events. While some demographic evolution simulators have been proposed to address this issue, they are developed using cross-sectional data and capture only a small set of life cycle events and their interdependence. Addressing these drawbacks, we propose a demographic microsimulator (DEMOS) that captures the “continuum of life” by considering a range of household- and individual-level life cycle events. DEMOS is developed using the Panel Survey of Income Dynamics, one of the world’s longest-running longitudinal surveys. The DEMOS submodels consider key life cycle events that are influenced by agents’ demographic variables. DEMOS is applied to evolve the population of the San Francisco Bay Area over a 9-year horizon. Results demonstrate how DEMOS generates life trajectories and how DEMOS outputs match the observed demographic trends. DEMOS is expected to enable longitudinal analysis in the context of ABMs and expand ABMs analyses relating to dynamic processes such as household-level vehicle transactions.

Demographic evolution↗
DOE OSTI2020

First Ever Polymer Flood Field Pilot To Enhance The Recovery Of Heavy Oils On Alaska’s North Slope - Pushing Ahead One Year Later

In June 2018 the team embarked on an ambitious project to address the slow development pace of Alaska’s 20+ billion barrels heavy oil resource via the first ever polymer flood pilot. Following the successful commencement of the pilot in August 2018, the field demonstration, supporting laboratory experiments and numerical simulation have steadily progressed. A significant amount of valuable data and lessons learned have been collected, and are reported in this paper. The ongoing pilot and the research activities is making headway toward the primary objective of validating the use of polymer flooding for extracting heavy oil in Alaska’s challenging environment. The pilot is conducted in two pre-existing pairs of horizontal injectors and producers in an isolated fault block of the Schrader Bluff heavy oil reservoir at the Milne Point Field. A customized polymer blending and pumping unit injects HPAM polymer at a concentration of 1,750 ppm to achieve a target viscosity of 45 cP. Supporting coreflood laboratory experiments have focused on quantification of polymer retention in the rock, and effect of injection water salinity, polymer, and their combinations on oil recovery. The injection and production response of the pilot flood pattern is utilized to develop a history matched reservoir simulation model for forecasting oil recovery beyond the pilot. Finally, specially designed laboratory experiments address anticipated operating concerns regarding post-polymer breakthrough such as oil-water separation efficiency and polymer induced fouling of heater tubes. Polymer has been injected continuously since startup except for two short equipment modification shutdowns, and more recently a prolonged disruption due to polymer hydration issues at the J-pad field site. Cumulatively, over 600,000 lbs. of polymer has been injected, corresponding to ~7%PV. The two producers show significant decrease in the water cut, gradually increasing oil rate, and no polymer breakthrough. Two main observations from the coreflood are a significant uncertainty in polymer retention values, and positive oil recovery response to low salinity water (2,600 mg/liter TDS). The heterogeneity in the flood pattern presents some challenges in obtaining a robust history matched simulation model. Experimental results on produced fluids treatment indicate the formation of a dense polymer deposit, at certain conditions, on heating tubes that can negatively impact the heat transfer efficiency. The scientific knowledge, including the lessons learned during unanticipated shutdowns, quality control, logistics and field data that is being acquired from this effort has referential value for other planned EOR projects. Finally, by all indications, the polymer field pilot is steadily progressing toward achieving the ultimate goal of unlocking the massive heavy oil resources on Alaska North Slope (ANS).

Dandekar, Abhijit↗
DOE OSTI2022

A review of coarse mineral dust in the Earth system

Mineral dust particles suspended in the atmosphere span more than three orders of magnitude in diameter, from <0.1 µm to more than 100 µm. This wide size range makes dust a unique aerosol species with the ability to interact with many aspects of the Earth system, including radiation, clouds, hydrology, atmospheric chemistry, and biogeochemistry. This review focuses on coarse and super-coarse dust aerosols, which we respectively define as dust particles with a diameter of 2.5–10 µm and 10–62.5 µm. We review several lines of observational evidence indicating that coarse and super-coarse dust particles are transported farther than previously expected and that the abundance of these particles is substantially underestimated in current global models. We synthesize previous studies that used observations, theories, and model simulations to highlight the impacts of coarse and super-coarse dust aerosols on the Earth system, including their effects on dust-radiation interactions, dust-cloud interactions, atmospheric chemistry, and biogeochemistry. Specifically, coarse and super-coarse dust aerosols produce a net positive direct radiative effect (warming) at the top of the atmosphere and can modify temperature and water vapor profiles, influencing the distribution of clouds and precipitation. In addition, coarse and super-coarse dust aerosols contribute a substantial fraction of ice-nucleating particles, especially at temperatures above –23 °C. They also contribute a substantial fraction to the available reactive surfaces for atmospheric processing and the dust deposition flux that impacts land and ocean biogeochemistry by supplying important nutrients such as iron and phosphorus. Furthermore, we examine several limitations in the representation of coarse and super-coarse dust aerosols in current model simulations and remote-sensing retrievals. Because these limitations substantially contribute to the uncertainties in simulating the abundance and impacts of coarse and super-coarse dust aerosols, we offer some recommendations to facilitate future studies. Overall, we conclude that an accurate representation of coarse and super-coarse properties is critical in understanding the impacts of dust aerosols on the Earth system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Modeling and Simulation Development Pathways to Accelerating KP-FHR Licensing (Final Report)

This project assembles a strong U.S. industry and national laboratory team to complete scope of work. Kairos Power (KP), headquartered in Alameda, CA, is the leader of this effort and has built an internal team of highly competent engineers and managers with extensive combined experience in nuclear power, conventional power, product development, and licensing. INL, ANL, and LANL bring unique capabilities in advanced reactor R&D and licensing. The project funding source is the result of FOA No. 0001817, U. S. Industry Opportunities for Advanced Nuclear Technology Development. There has been on-going work and this Access Cooperative Research and Development Agreement (CRADA) will cover the remaining work scope of FOA 0001817. KP is implementing innovative strategies that can reduce the cost and accelerate the initial demonstration of the Kairos Power Fluoride-salt-cooled, High-temperature Reactor (KP-FHR) to meet the needs of the U.S. electricity market by 2030. Licensing of the KP-FHR could be significantly accelerated using advanced computing methods with sufficient predictive capabilities to be able to extrapolate potential response of the structure in different scenarios. However, currently used computational methods heavily rely on empirical fits and cannot be used for extrapolation. The scope focuses on improving the modeling capability in the NEAMS Grizzly structural mechanics code and the NEAMS BISON fuel performance code and the NEAMS SAM systems analysis code. This work leverages the expertise and know-how gathered in three DOE National Laboratories – INL, ANL, and LANL.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Short-term impacts of 2017 western North American wildfires on meteorology, the atmosphere’s energy budget, and premature mortality

Abstract Western North American fires have been increasing in magnitude and severity over the last few decades. The complex coupling of fires with the atmospheric energy budget and meteorology creates short-term feedbacks on regional weather altering the amount of pollution to which Americans are exposed. Using a combination of model simulations and observations, this study shows that the severe fires in the summer of 2017 increased atmospheric aerosol concentrations leading to a cooling of the air at the surface, reductions in sensible heat fluxes, and a lowering of the planetary boundary layer height over land. This combination of lower-boundary layer height and increased aerosol pollution from the fires reduces air quality. We estimate that from start of August to end of October 2017, ∼400 premature deaths occurred within the western US as a result of short-term exposure to elevated PM 2.5 from fire smoke. As North America confronts a warming climate with more fires the short-term climate and pollution impacts of increased fire activity should be assessed within policy aimed to minimize impacts of climate change on society.

Bernstein, Diana N. (ORCID:0000000308279336)↗
DOE OSTI2025

Potential Effects of Climate Change and Solar Radiation Modification on Renewable Energy Resources

Solar radiation modification (SRM) is a possible deliberate approach to decrease or reflect incoming solar radiation with the goal of reducing global temperatures, which have increased over the last decades due to high atmospheric greenhouse gas concentrations. Stratospheric aerosol injection, specifically, has shown potential for successfully reducing global temperatures in climate model simulations. Despite the growing literature in the areas of climate change and SRM, their combined effects on renewable energy generation, a climate change mitigation strategy, have not been addressed. In this review paper, we synthesize previous literature on the possible effects of climate change and SRM on renewable energy resources (i.e., wind energy, solar energy, biomass energy, and hydropower), review the status of climate change and SRM research, and explore potential effects of SRM on renewable energy primarily in the Continental United States (CONUS), but with global perspectives as well. We discuss the research challenges and impacts of SRM on renewable energy and conclude by discussing the potential implications of SRM for renewables for SRM governance and policy. This work is not advocating for or against SRM. It is highlighting an important potential impact for future decision makers.

Kumler, Andrew [National Renewable Energy Laborato↗
DOE OSTI2023

Optimal Traffic Signal Control Using Priority Metric Based on Real-Time Measured Traffic Information

Optimizing traffic control systems at traffic intersections can reduce network-wide fuel consumption as well as improve traffic flow. While traffic signals have conventionally been controlled based on predetermined schedules, various adaptive control systems have been developed recently using advanced sensors such as cameras, radars, and LiDARs. By utilizing rich traffic information enabled by the advanced sensors, more efficient or optimal traffic signal control is possible in response to varying traffic conditions. This paper proposes an optimal traffic signal control method to minimize network-wide fuel consumption utilizing real-time traffic information provided by advanced sensors. This new method employs a priority metric calculated by a weighted sum of various factors, including the total number of vehicles, total vehicle speed, vehicle waiting time, and road preference. Genetic Algorithm (GA) is used as a global optimization method to determine the optimal weights in the priority metric. In order to evaluate the effectiveness of the proposed method, a traffic simulation model is developed in a high-fidelity traffic simulation environment called SUMO, based on a real-world traffic network. The traffic flow within this model is simulated using actual measured traffic data from the traffic network, enabling a comprehensive assessment of the novel optimal traffic signal control method in realistic conditions. The simulation results show that the proposed priority metric-based real-time traffic signal control algorithm can significantly reduce network-wide fuel consumption compared to the conventional fixed-time control and coordinated actuated control methods that are currently used in the modeled network. Additionally, incorporating truck priority in the priority metric leads to further improvements in fuel consumption reduction.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Coupled SAM/Griffin Model of a Reference Fluoride-Salt-Cooled High-Temperature Reactor for Multi-Physics Simulations

A multi-physics coupled simulation model of a reference pebble bed fluoride-salt-cooled high-temperature reactor (PB-FHR) has been developed with SAM and Griffin computer codes for transient safety analysis. The reference problem of a prototypical reactor design serves as the foundation for the U.S. NRC (Nuclear Regulatory Commission) to verify the adequacy of computer codes and evaluation models for specific reactor types. In this work, the previously developed SAM model for PB-FHR primary loop has been updated for the coupled simulation. The updated SAM PB-FHR model includes a 2-D axial symmetric core region and external core components in 0-D/1-D. In addition to the primary loop, a detailed model of the RCCS (reactor cavity cooling system) is added. The 2-D and 1-D domains are tightly coupled using the single-solve approach developed in SAM. In the pebble bed region, the SAM multiscale explicit pebble model is applied to calculate the pebble and TRISO fuel kernel temperatures. The Griffin model used in this work is based on a model developed at Idaho National Laboratory in collaboration with the U.S. NRC. The Griffin neutronics model and SAM thermal hydraulics model is coupled with the Comprehensive Reactor Analysis Bundle (CRAB or alternately BlueCRAB) application. Both steady-state and transient scenarios are simulated to demonstrate the model's suitability for multi-physics simulations of PB-FHR transients.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗