Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “methane conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

EVOLUTION OF NI-YSZ MICROSTRUCTURE AND ITS RELATION TO STEAM REFORMING ACTIVITY AND YSZ PHASE STABILITY

Internal steam reforming of methane within solid oxide fuel cells (SOFC) offers a method of improved thermal management and reduced system complexity. Thermal gradient management is dependent upon controlling the reforming activity along the length of the anode. The inherent activity of Ni-YSZ for the steam reforming of methane is highly dependent upon the pretreatment and reduction procedures employed. During reductive pretreatment of the anode, small Ni crystallites can exolve from the YSZ to provide a significant component to the initial catalytic activity. This activity decreases with time as the small Ni crystallites sinter. Control of this microstructure is key to controlling the thermal gradients along the anode. NiO initially dissolved in 5YSZ increases the amount of undesirable monoclinic phase, and the exolution of Ni crystallites during reduction results in a reduction in the monoclinic phase. With 8YSZ, nickel also dissolves and exolves from the YSZ particles but no monoclinic phase is observed.

03 NATURAL GAS↗

Investigating the effect of oxy-fuel combustion and light coal volatiles interaction: A mass spectrometric study

Given the multi-physical nature of coal combustion, the development and validation of detailed chemical models reproducing coal volatiles combustion under oxy-fuel conditions is a crucial step towards the advancement of predictive full-scale simulations. During the devolatilization process, a large variety of gases is released and undergoes secondary pyrolysis and oxidation reactions. Therefore, the ability to capture their interactions is a prerequisite for each chemical model used in its detailed or reduced form to simulate these processes. In this work, a high-resolution time-of-flight molecular-beam mass spectrometer was employed to enable fast and simultaneous detection of stable and unstable species in counterflow flames of typical light volatiles. Following an approach of increasing complexity, carbon dioxide and methane were progressively added to an argon diluted acetylene base flame. For the three flames investigated here, results showed a significant increase in the concentration of C 2 and C 3 hydrocarbons and oxygenated compounds caused by methane addition to the acetylene flame. By hindering the production of the butadienyl radical, the addition of methane induces the reduction of benzene which triggers the decrease of aromatic species. Conversely, CO 2 addition did not have significant effects on intermediates. To guide and interpret the measurements, numerical simulations with two existing chemical models were performed and the results were found to be consistent with the experimental data for small hydrocarbons. Some discrepancies were found between the two model predictions and between simulations and experiments for C 4 and C 5 species. In addition, numerical simulations were found to overestimate the role of the methyl radical in aromatics formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The photolysis of NH3 in the presence of substituted acetylenes - A possible source of oligomers and HCN on Jupiter

An NMR spectral study is presently conducted of NH3 photolysis in the presence of substituted acetylenes with NMR spectra and gas chromatography. Quantum yields and percentage conversions to products are reported. It is shown that acetylenic hydrocarbons generated during methane photolysis in Jupiter's stratosphere can react with radicals formed by NH3 photolysis to yield nonvolatile, yellow-brown polymers, alkylnitriles, and in due course, HCN, as observed on Jupiter.

Ferris, James P.↗

Synthesis of murdochite-type Ni{sub 6}MnO{sub 8} with variable specific surface areas and the application in methane oxidation

To synthesize a murdochite-type Ni{sub 6}MnO{sub 8} with variable specific surface areas, an oxalate precursor was calcined at 350–500 °C in flowing argon, and the calcined sample was heated to 600 °C in air. The lattice constant of the Ni{sub 6}MnO{sub 8} did not depend on the calcination temperature of the precursor, while the specific surface area decreased from 8.4 m{sup 2}/g to 2.6 m{sup 2}/g when increasing the calcination temperature of the precursor. The methane (CH{sub 4}) oxidation data indicated that the temperature corresponding to the 50% conversion (T{sub 50%}) of Ni{sub 6}MnO{sub 8} calcined at 350 °C or 400 °C was lower than that of all other Ni{sub 6}MnO{sub 8} specimens. However, the intrinsic conversion of Ni{sub 6}MnO{sub 8} calcined at 350 °C, which is defined as conversion per specific surface area, was half of that of all other Ni{sub 6}MnO{sub 8} specimens. The degree of crystallinity and catalytic performance of the Ni{sub 6}MnO{sub 8} calcined at 400 °C were high. - Graphical abstract: The conversion of CH{sub 4} into CO{sub 2} and H{sub 2}O on Ni{sub 6}MnO{sub 8}, which was heated at 600 °C in air after the calcination of the precursor at 350 °C, 400 °C, 450 °C, or 500 °C in flowing argon, was measured. Since the specific surface area was strongly affected by the calcination temperature of the precursor, intrinsic conversion (IC) was defined as conversion per the specific surface area. For comparison, the IC value on Ni{sub 6}MnO{sub 8} synthesized by the direct calcination of the precursor at 600 °C in air is plotted. - Highlights: • The oxalate precursor was calcined at 350–500 °C in flowing argon. • Murdochite-type Ni{sub 6}MnO{sub 8} was obtained by heating the calcined sample in air. • The specific surface area of Ni{sub 6}MnO{sub 8} varied with the calcination temperature. • The degree of crystallinity and catalysis of Ni{sub 6}MnO{sub 8} calcined at 400 °C were high.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO-promoted low-temperature conversion of CH 4 to hydrogen and carbon nanotubes on Nanocrystalline Cr-doped ferrite catalyst

Catalytic decomposition of methane (CDM) to H 2 and multiwalled carbon nanotubes (MWCNTs) was achieved by a nanocrystalline Cr-doped ferrite (FeCr) catalyst at 500 °C and atmospheric pressure with minor cofed CO. The exothermic Boudouard reaction increased the temperature and H 2 from CDM at catalyst surface that induced Fe 2+ reduction to Fe 0 . The Fe 0 clusters along with the CO-originated surface oxygens enabled transfer of C and H to sustain the surface CDM and CO reactions. The metallic Fe-enabled C transfer led to the formation of MWCNTs. The Cr 6+/3+ dopants facilitated the Fe redox cycles and maintained surface oxygens for high catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling a Packed Bed Reactor Utilizing the Sabatier Process

A numerical model is being developed using Python which characterizes the conversion and temperature profiles of a packed bed reactor (PBR) that utilizes the Sabatier process; the reaction produces methane and water from carbon dioxide and hydrogen. While the specific kinetics of the Sabatier reaction on the RuAl2O3 catalyst pellets are unknown, an empirical reaction rate equation1 is used for the overall reaction. As this reaction is highly exothermic, proper thermal control is of the utmost importance to ensure maximum conversion and to avoid reactor runaway. It is therefore necessary to determine what wall temperature profile will ensure safe and efficient operation of the reactor. This wall temperature will be maintained by active thermal controls on the outer surface of the reactor. Two cylindrical PBRs are currently being tested experimentally and will be used for validation of the Python model. They are similar in design except one of them is larger and incorporates a preheat loop by feeding the reactant gas through a pipe along the center of the catalyst bed. The further complexity of adding a preheat pipe to the model to mimic the larger reactor is yet to be implemented and validated; preliminary validation is done using the smaller PBR with no reactant preheating. When mapping experimental values of the wall temperature from the smaller PBR into the Python model, a good approximation of the total conversion and temperature profile has been achieved. A separate CFD model incorporates more complex three-dimensional effects by including the solid catalyst pellets within the domain. The goal is to improve the Python model to the point where the results of other reactor geometry can be reasonably predicted relatively quickly when compared to the much more computationally expensive CFD approach. Once a reactor size is narrowed down using the Python approach, CFD will be used to generate a more thorough prediction of the reactors performance.

Reactor↗

Low temperature dry reforming of methane using Ru-Ni-Mg/ceria-zirconia catalysts: Effect of Ru loading and reduction temperature

Dry reforming catalysts, especially those with activity at moderate temperatures, have been intensely investigated to enhance the conversion of biogas. Here, Ru is evaluated as a promoter for Ni-Mg based catalysts. Catalysts based on 1.4 wt%Ni-1.0 wt%Mg-Ce 0.6 Zr 0.4 O 2 with Ru (0.02–0.32 wt%) were prepared using incipient wetness. The reducibility of the catalysts and conversions increased with increasing Ru content. Increases in conversions with increasing Ru loading was attributed to the additional active sites and synergistic effect between Ru and Ni, which weakened Ni-Mg interactions. Samples showed dry reforming activity at low temperatures (450–510 °C). Reaction rates and activation energies of higher loading Ru samples (1.4 wt%Ni-1.0 wt%Mg/Ce 0.6 Zr 0.4 O 2 with 0.16 and 0.32 wt%Ru) decreased when the reduction temperature was raised from 300 to 400 °C. A 20 h TOS study showed stable catalytic activity with minimal coke deposition. Furthermore, the results suggest that Ru is an alternative to Pt in promoting low temperature dry reforming of methane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performance evaluation of a high-sensitivity tritium gas monitor using a pulse-shaping analyzer

A tritium gas monitor was developed by applying several techniques including pulse shape analysis. The optimum analyzer values were determined for parameters such as the bias (voltage) applied to the detector, counting gas flow rate, and mixing ratio of sample air to counting gas using an enclosed tritium reference source. After applying these optimized parameters, the factor for converting counting rate to tritium concentration was determined by conducting an experiment using tritiated methane gas. Finally, the detection limit of the monitor for air samples containing tritium was determined based on the conversion factor. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Catalytic Reaction Rates Controlled by Metal Oxidation State: C−H Bond Cleavage in Methane over Nickel‐Based Catalysts

Abstract The role of low concentrations of carbon complexes in hydrocarbon decomposition over transition metal surfaces has been a topic of much debate over the past decades. It is also a mystery as to whether or not electric fields can enhance hydrocarbon conversion in an electrochemical device at lower than normal reforming temperatures. To provide a “bottom‐up” fundamental insight, C−H bond cleavage in methane over Ni‐based catalysts was investigated. Our theoretical results show that the presence of carbon or carbide‐like species at the interface between the Ni cluster and its metal‐oxide support, as well as the application of an external positive electric field, can significantly increase the Ni oxidation state. Furthermore, the first C−H bond cleavage in methane is favored as the local oxidation state of Ni increases. Thus, the presence of a low concentration of carbon species, or the addition of a positive electric field will improve the hydrocarbon activation process.

Che, Fanglin↗

Catalytic Reaction Rates Controlled by Metal Oxidation State: C−H Bond Cleavage in Methane over Nickel‐Based Catalysts

Abstract The role of low concentrations of carbon complexes in hydrocarbon decomposition over transition metal surfaces has been a topic of much debate over the past decades. It is also a mystery as to whether or not electric fields can enhance hydrocarbon conversion in an electrochemical device at lower than normal reforming temperatures. To provide a “bottom‐up” fundamental insight, C−H bond cleavage in methane over Ni‐based catalysts was investigated. Our theoretical results show that the presence of carbon or carbide‐like species at the interface between the Ni cluster and its metal‐oxide support, as well as the application of an external positive electric field, can significantly increase the Ni oxidation state. Furthermore, the first C−H bond cleavage in methane is favored as the local oxidation state of Ni increases. Thus, the presence of a low concentration of carbon species, or the addition of a positive electric field will improve the hydrocarbon activation process.

Che, Fanglin↗

Direct Comparison of the Activity and Selectivity of Rh 1 Cu and Ni 1 Cu Single-Atom Alloy Sites for Ethanol Decomposition

Ethanol is an important source of clean hydrogen, acetaldehyde, acetic acid, acetate esters, and light hydrocarbons. Controlling the divergent reaction pathways to these products requires understanding how different active sites influence the elementary steps involved. Herein, we present a combined surface science, theory, and nanoparticle catalysis study demonstrating how two single-atom dopants (Rh and Ni) in a Cu host can distinctively alter the selectivity of alcohol conversion. Specifically, our model studies reveal that ethanol reacts on Ni 1 Cu single-atom alloys to selectively produce acetaldehyde, whereas methane and CO are also formed on Rh 1 Cu single-atom alloys. Interestingly, these different reactivities are in contrast to the behavior of the pure metals as Ni(111) and Rh(111) surfaces favor methane/CO and surface carbon/CO, respectively. DFT calculations of reaction pathways and simulated product desorption based on microkinetic analyses explain these reactivity differences, demonstrating that C–C cleavage leading to methane formation has a lower barrier on Rh single-atom sites. To test the catalytic relevance of these fundamental results we synthesized and characterized supported Ni 1 Cu and Rh 1 Cu single-atom alloy nanoparticles with dopant:Cu ratios of 1:200. Flow reactor results revealed that both Ni and Rh increased ethanol conversion over Cu and that Ni 1 Cu catalysts were >99.9% selective to acetaldehyde, while Rh 1 Cu also produced 0.6%–2.6% of equimolar methane and CO between 433 and 493 K, demonstrating that C–C bond cleavage is enabled by isolated Rh sites. Furthermore, these catalytic results bridge the pressure and materials gaps, and together, this study provides insights into how different isolated dopant sites promote different catalytic pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Zeolite Structure And Composition on the Synthesis of Dimethyl Carbonate By Oxidative Carbonylation of Methanol on Cu-Exchanged Y, ZSM-5, And Mordenite

The aim of this work was to establish the effects of zeolite structure/chemical composition on the activity and selectivity of Cu-exchanged Y (Si/Al = 2.5), ZSM-5 (Si/Al = 12), and Mordenite (Si/Al = 10) for the oxidative carbonylation of methanol to DMC. Catalysts were prepared by solid-state ion-exchange of the H-form of each zeolite with CuCl and were then characterized by FTIR and X-ray absorption spectroscopy (XAS). The XANES portion of the XAS data showed that all of the copper was present as Cu{sup +} cations, and analysis of the EXAFS portion of the data shows the Cu{sup +} cations had a CuO coordination number of 2.1 on Cu-Y and 2.7 on Cu-ZSM-5 and Cu-MOR. Dimethyl carbonate (DMC) was observed as the primary product when a mixture of CH{sub 3}OH/CO/O{sub 2} was passed over Cu-Y, whereas dimethoxy methane was the primary product over Cu-ZSM-5 and Cu-MOR. The higher activity and selectivity of Cu-Y for the oxidative carbonylation of methanol can be attributed to the weaker adsorption of CO on the Cu{sup +} cations exchanged into Y zeolite. In situ IR observations revealed that under reaction conditions, adsorbed CO was displaced by methoxide groups bound to the Cu{sup +} cations. The kinetics of DMC synthesis suggests that the rate-limiting step in the formation of this product was the insertion of CO into CuOCH{sub 3} bonds. The yield of DMC decreased with methanol conversion, likely due to the hydrolysis of DMC to methanol and carbon dioxide.

03 NATURAL GAS↗

A semi-continuous process for co-production of CO 2 -free hydrogen and carbon nanotubes via methane pyrolysis

Heterogeneous catalytic pyrolysis of hydrocarbons to produce CO 2 -free hydrogen and high-quality solid carbon have historically been stymied by issues related to catalyst deactivation by carbon formed during pyrolysis on the catalyst surface. In addition, a system that demonstrates sustained performance in terms of high conversion, high H 2 yield, and high quality of produced carbon has remained elusive. Here, we propose and demonstrate a semi-continuous methane pyrolysis process to H 2 and carbon nanotubes (CNTs) consisting of repeated pyrolysis and in situ (i.e., within the reactor) CNT dislodging by vigorous steam/argon fluidization. With this process, we demonstrate 10 process cycles with high H 2 yield from CH 4 and CNT dislodging in a fluidized-bed reactor with an Fe/q-Al 2 O 3 catalyst synthesized by an easily scalable incipient wetness impregnation process. We also identify and present opportunities for future catalyst and process development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Develop an efficient and cost-effective novel anaerobic digestion system producing high purity of methane from diverse waste biomass

This project focuses on developing an advanced, intensified anaerobic digestion system aimed at transforming the treatment and conversion of organic wastes into valuable products, specifically renewable natural gas. The motivation for this research stems from the limitations of conventional anaerobic digestion technologies, which often face challenges such as long retention times, high operational costs, and incomplete organic material degradation. The new technology called Intensified Versatile Anaerobic Digestion (IVAD), is developed to address these challenges by incorporating innovative reactors and processes that enhance the overall efficiency and output of anaerobic digestion. The significance of this project lies in its potential to revolutionize waste management practices and waste biomass utilization. The IVAD system integrates a hyperthermophilic anaerobic acidification reactor, a hydrothermal treatment (HTT) unit, and both thermophilic and mesophilic methanogenic reactors. This combination enables a higher rate of organic breakdown and energy recovery, resulting in faster processing times, reduced reactor sizes, and lower operational costs compared to traditional systems. Key data include an increase in methane productivity to 1.18 m 3 /m 3 /day, a significant improvement compared to the baseline technology’s 0.64 m 3 /m 3 /day. Additionally, the IVAD system achieves a 45% reduction in levelized cost of energy (LCOE), down to $\$$10.04/MMBTU, and an energy return on investment (EROI) of 3.19, representing an 87% increase over baseline levels. Technical and economic analyses highlight that the IVAD system significantly reduces hydraulic retention time (HRT) and solid retention time (SRT). The HRT for the HTT reactor can be reduced from 1 hour to 0.5 hours, while decoupling SRT from HRT in the anaerobic acidification reactor (AAR) allows for further reductions. These design optimizations lead to smaller reactor volumes, cutting down equipment and construction costs. Despite these advancements, energy consumption remains comparable to conventional methods due to a novel heat recovery strategy, enhancing overall process productivity. The system also achieves in-situ CO 2 removal and ammonia stripping features, resulting in biogas with a methane purity level of 75%, and produces high-quality nitrogen fertilizer as an additional by-product. Public benefits of the IVAD system are substantial, contributing to sustainable waste management and renewable energy production. By providing a scalable solution that can be adopted by dairy farms and similar agricultural operations, the IVAD system helps reduce waste, produce renewable natural gas (RNG) suitable for transportation fuel, and generate fertilizer, supporting a circular economy. This project plays a role in achieving broader environmental objectives by mitigating greenhouse gas emissions and promoting energy independence. Additionally, it offers a pathway for farmers to lower operational costs while adopting practices that are both environmentally sustainable and economically advantageous.

03 NATURAL GAS↗

Toward sustainable production of N-containing products via nonthermal plasma-enhanced conversion of natural gas resources

Nonthermal plasmas can directly activate and cleave the strong chemical bonds in molecular nitrogen and methane to facilitate the transformation of these inherently stable molecules through the application of electrical energy. Here, we report a low temperature, atmospheric pressure, nonthermal plasma for the “one-pot” synthesis of olefins, alkynes, higher molecular weight hydrocarbons, ammonia, and nitrogen-containing liquids from a representative shale gas feed enriched with nitrogen. Furthermore, we reproducibly observe a wide range of valuable and synthetically challenging gas-phase and liquid-phase products containing C-N, C-C, and N-H bonding by controlling the N 2 concentration in the inlet feed stream. In nitrogen-lean regimes, hydrocarbon products dominate (e.g., ethylene, acetylene, etc.), while nitrogen-rich regimes promote incorporation of nitrogen into the products, leading to the formation of ammonia and liquid products containing a variety of functionalities (e.g., nitriles, amines, heterocycles). High resolution electrospray ionization mass spectrometry was used to measure molecular weights and identify the chemical formulas of the liquid products. Van Krevelen diagrams were created and showed many products with compositions around H/C = 2 and N/C = 0.5, indicating the potential importance of intermediate species with these ratios for liquid formation (e.g., CH 3 CN + H).

03 NATURAL GAS↗

Use of tamarisk as a potential feedstock for biofuel production.

This study assesses the energy and water use of saltcedar (or tamarisk) as biomass for biofuel production in a hypothetical sub-region in New Mexico. The baseline scenario consists of a rural stretch of the Middle Rio Grande River with 25% coverage of mature saltcedar that is removed and converted to biofuels. A manufacturing system life cycle consisting of harvesting, transportation, pyrolysis, and purification is constructed for calculating energy and water balances. On a dry short ton woody biomass basis, the total energy input is approximately 8.21 mmBTU/st. There is potential for 18.82 mmBTU/st of energy output from the baseline system. Of the extractable energy, approximately 61.1% consists of bio-oil, 20.3% bio-char, and 18.6% biogas. Water consumptive use by removal of tamarisk will not impact the existing rate of evapotranspiration. However, approximately 195 gal of water is needed per short ton of woody biomass for the conversion of biomass to biocrude, three-quarters of which is cooling water that can be recovered and recycled. The impact of salt presence is briefly assessed. Not accounted for in the baseline are high concentrations of Calcium, Sodium, and Sulfur ions in saltcedar woody biomass that can potentially shift the relative quantities of bio-char and bio-oil. This can be alleviated by a pre-wash step prior to the conversion step. More study is needed to account for the impact of salt presence on the overall energy and water balance.

03 NATURAL GAS↗