Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “maximum principle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Nonlinear propagating modes beyond the phonons in fluorite-structured crystals

The vibrational energy of crystals is known to propagate in a fixed number of phonon branches allowed by symmetry. In the realm of nonlinear dynamics, however, additional nonlinear propagating modes are possible. Nonlinear propagating modes have unique properties that are important in many disciplines including optical communications, conducting polymers, biology, magnetism, and nuclear physics. Yet, despite the crucial importance of crystal lattice vibrations in fundamental and applied science, such additional propagating modes have not been observed in ordinary crystals. Here, we show that propagating modes exist beyond the phonons in fluorite-structured thoria, urania, and natural calcium fluoride using neutron scattering and first-principles calculations. These modes are observed at temperatures ranging from 5 K up to 1200 K, extend to frequencies 30–40% higher than the maximum phonon frequency, and travel at velocities comparable to or higher than the fastest phonon. The nonlinear origin of the modes is explained in part via perturbation theory, which approximately accounts for nonlinearity. Given that these modes are still clearly observed at 5 K, they are likely an inherent feature of the quantum ground state. The existence of these waves in three-dimensional crystals may have ramifications for material properties.

36 MATERIALS SCIENCE↗

Effect of Boron doping on the electronic properties of the fullerenes of different sizes

We report the results of the effect of Boron doping in C{sub n}; n = 28, 32, 36, 40, 44, 50 and 60 using the first principle calculation based on density functional theory. The HOMO-LUMO gap changes significantly with the decreasing fullerene size below C{sub 60}, with maximum gap observed for C{sub 32}. The HOMO-LUMO gap of Boron doped fullerenes varies significantly w.r.t. pure fullerenes. Also, the gap decreases for C{sub n-m}B{sub m}X, the boron doped fullerenes with exohedral alkali metals for n = 28, 32, 36, 40, 44, 50 and 60; m = 1 to 4; X = Li, Na and K. The Mulliken charge transfer from the exohedral alkali metals towards the various fullerene cages is altered marginally by the boron doping in fullerenes and follows the order K>Na>Li.

36 MATERIALS SCIENCE↗

Spatial and temporal tuning in void models for acceleration

There has been considerable interest in recent years in cosmological models in which we inhabit a very large, underdense void as an alternative to dark energy. A long-standing objection to this proposal is that observations limit our position to be very close to the void center. By selecting from a family of void profiles that fit supernova luminosity data, we carefully determine how far from the center we could be. To do so, we use the observed dipole component of the cosmic microwave background, as well as an additional stochastic peculiar velocity arising from primordial perturbations. We find that we are constrained to live within 80 Mpc of the center of a void--a somewhat weaker constraint than found in previous studies, but nevertheless a strong violation of the Copernican principle. By considering how such a Gpc-scale void would appear on the microwave sky, we also show that there can be a maximum of one of these voids within our Hubble radius. Hence, the constraint on our position corresponds to a fraction of the Hubble volume of order 10{sup -8}. Finally, we use the fact that void models only look temporarily similar to a cosmological-constant-dominated universe to argue that these models are not free of temporal fine-tuning.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

LIFETIME PREDICTION FOR MODEL 9975 O-RINGS IN KAMS

The Savannah River Site (SRS) is currently storing plutonium materials in the K-Area Materials Storage (KAMS) facility. The materials are packaged per the DOE 3013 Standard and transported and stored in KAMS in Model 9975 shipping packages, which include double containment vessels sealed with dual O-rings made of Parker Seals compound V0835-75 (based on Viton{reg_sign} GLT). The outer O-ring of each containment vessel is credited for leaktight containment per ANSI N14.5. O-ring service life depends on many factors, including the failure criterion, environmental conditions, overall design, fabrication quality and assembly practices. A preliminary life prediction model has been developed for the V0835-75 O-rings in KAMS. The conservative model is based primarily on long-term compression stress relaxation (CSR) experiments and Arrhenius accelerated-aging methodology. For model development purposes, seal lifetime is defined as a 90% loss of measurable sealing force. Thus far, CSR experiments have only reached this target level of degradation at temperatures {ge} 300 F. At lower temperatures, relaxation values are more tolerable. Using time-temperature superposition principles, the conservative model predicts a service life of approximately 20-25 years at a constant seal temperature of 175 F. This represents a maximum payload package at a constant ambient temperature of 104 F, the highest recorded in KAMS to date. This is considered a highly conservative value as such ambient temperatures are only reached on occasion and for short durations. The presence of fiberboard in the package minimizes the impact of such temperature swings, with many hours to several days required for seal temperatures to respond proportionately. At 85 F ambient, a more realistic but still conservative value, bounding seal temperatures are reduced to {approx}158 F, with an estimated seal lifetime of {approx}35-45 years. The actual service life for O-rings in a maximum wattage package likely lies higher than the estimates due to the conservative assumptions used for the model. For lower heat loads at similar ambient temperatures, seal lifetime is further increased. The preliminary model is based on several assumptions that require validation with additional experiments and longer exposures at more realistic conditions. The assumption of constant exposure at peak temperature is believed to be conservative. Cumulative damage at more realistic conditions will likely be less severe but is more difficult to assess based on available data. Arrhenius aging behavior is expected, but non-Arrhenius behavior is possible. Validation of Arrhenius behavior is ideally determined from longer tests at temperatures closer to actual service conditions. CSR experiments will therefore continue at lower temperatures to validate the model. Ultrasensitive oxygen consumption analysis has been shown to be useful in identifying non-Arrhenius behavior within reasonable test periods. Therefore, additional experiments are recommended and planned to validate the model.

42 ENGINEERING↗

Community reactions to helicopter noise - Results from an experimental study

Community reactions to low numbers of helicopter noise events (less than 50 per day) are investigated using a new type of study design. Although the effect of maximum noise level and number of noise events on helicopter noise annoyance was found to be similar to that represented by the energy summation principle contained in L(eq)-based noise indices, it is noted that the possibility that the number of noise events has only a small effect on annoyance cannot be rejected at the conventional p of less than 0.05 level. The effect of the duration of noise events was also shown to be consistent with L(eq)-based indices. After removing the effects of differences in duration and noise levels, little difference is found between reactions to impulsive and nonimpulsive types of helicopters.

Fields, James M.↗

A Method for Thermal Analysis of Spiral Bevel Gears

A modeling method for analyzing the three-dimensional thermal behavior of spiral bevel gears has been developed. The model surfaces are generated through application of differential geometry to the manufacturing process for face-milled spiral bevel gears. Contact on the gear surface is found by combining tooth contact analysis with three-dimensional Hertzian theory. The tooth contact analysis provides the principle curvatures and orientations of the two surfaces. This information is then used directly in the Hertzian analysis to find the contact size and maximum pressure. Heat generation during meshing is determined as a function of the applied load, sliding velocity, and coefficient of friction. Each of these factors change as the point of contact changes during meshing. A nonlinear finite element program was used to conduct the heat transfer analysis. This program permitted the time- and position-varying boundary conditions, found in operation, to be applied to a one-tooth model. An example model and analytical results are presented.

Handschuh, Robert F.↗

Optimization of L1{sub 0} FePt/Fe{sub 45}Co{sub 55} thin films for rare earth free permanent magnet applications

The magnetic properties of magnetron sputtered bilayers consisting of Fe{sub 45}Co{sub 55} ultrathin layers on top of L1{sub 0} FePt films epitaxially grown on MgO substrates are studied in view of their possible application as rare earth free permanent magnets. It is found that FePt layers induce a tetragonal distortion to the Fe-Co layers which leads to increased anisotropy. This allows to take advantage of the Fe-Co high magnetic moment with less significant loss of the coercivity compared to a typical hard/soft exchange spring system. A maximum energy product approaching 50 MGOe is obtained for a FePt(7 ML)/FeCo/(5 ML) sample. The results are in accordance with first-principles computational methods, which predict that even higher energy products are possible for micromagnetically optimized microstructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Towards a supersymmetric generalization of the Schwarzschild black hole

The Wheeler-DeWitt (WDW) equation for the Kantowski-Sachs model can also be understood as the WDW equation corresponding to the Schwarzschild black hole due to the well known diffeomorphism between these two metrics. The WDW equation and its solutions are ignorant of the coordinate patch one is using, only by imposing coordinate conditions we can differentiate between cosmological and black hole models. At that point, the foliation parameter t or r will appear in the solution of interest. In this work we supersymmetrize this WDW equation obtaining an extra term in the potential with two possible signs. The WKB method is then applied, giving rise to two classical equations. It is shown that the event horizon can never be reached because very near to it, the extra term in the potential, for each one of the equations, is more relevant than the one that corresponds to Schwarzschild. One can then study the asymptotic cases in which one of the two terms in the Hamiltonian dominates the behavior. One of them corresponds to the usual Schwarzschild black hole. We will study here the other two asymptotic regions; they provide three solutions. All of them have a singularity in r=0 and depending on an integration constant C they can also present a singularity in r=C{sup 2}. Neither of these solutions have a Newtonian limit. The black hole solution we study is analyzed between the singularity r=C{sup 2} and a maximum radius r{sub m}. We find an associated mass, considering the related cosmological solution inside r=C{sup 2}, and based on the holographic principle an entropy can be assigned to this asymptotic solution.

99 GENERAL AND MISCELLANEOUS↗

Dynamically accumulated dose and 4D accumulated dose for moving tumors

Purpose: The purpose of this work was to investigate the relationship between dynamically accumulated dose (dynamic dose) and 4D accumulated dose (4D dose) for irradiation of moving tumors, and to quantify the dose uncertainty induced by tumor motion. Methods: The authors established that regardless of treatment modality and delivery properties, the dynamic dose will converge to the 4D dose, instead of the 3D static dose, after multiple deliveries. The bounds of dynamic dose, or the maximum estimation error using 4D or static dose, were established for the 4D and static doses, respectively. Numerical simulations were performed (1) to prove the principle that for each phase, after multiple deliveries, the average number of deliveries for any given time converges to the total number of fractions (K) over the number of phases (N); (2) to investigate the dose difference between the 4D and dynamic doses as a function of the number of deliveries for deliveries of a 'pulsed beam'; and (3) to investigate the dose difference between 4D dose and dynamic doses as a function of delivery time for deliveries of a 'continuous beam.' A Poisson model was developed to estimate the mean dose error as a function of number of deliveries or delivered time for both pulsed beam and continuous beam. Results: The numerical simulations confirmed that the number of deliveries for each phase converges to K/N, assuming a random starting phase. Simulations for the pulsed beam and continuous beam also suggested that the dose error is a strong function of the number of deliveries and/or total deliver time and could be a function of the breathing cycle, depending on the mode of delivery. The Poisson model agrees well with the simulation. Conclusions: Dynamically accumulated dose will converge to the 4D accumulated dose after multiple deliveries, regardless of treatment modality. Bounds of the dynamic dose could be determined using quantities derived from 4D doses, and the mean dose difference between the dynamic dose and 4D dose as a function of number of deliveries and/or total deliver time was also established.

60 APPLIED LIFE SCIENCES↗

Multishot laser altimeter - Design and performance

The maximum measurement range of a laser altimeter can be extended by averaging the measurements from multiple laser shots at the same target. We present the principles of operation and design of such a multishot laser altimeter, which uses a Si avalanche photodiode detector. As an example, the performance of a spaceborne multishot altimeter containing components similar to those of the single-shot Mars Observer Laser Altimeter are given under operating conditions that would be encountered near Saturn. With 100-shot averages, we show that the multishot laser altimeter is capable of accurate ranging at fly-by distances of 10,000 km from an icy satellite. With 100-shot averages, the minimum optical signal level at a 90 percent correct-measurement probability under nighttime background is 9.8 detected signal photons per pulse as compared with 76 photons per pulse with a single shot.

Sun, Xiaoli↗

ENTROPY PRODUCTION IN COLLISIONLESS SYSTEMS. II. ARBITRARY PHASE-SPACE OCCUPATION NUMBERS

We present an analysis of two thermodynamic techniques for determining equilibria of self-gravitating systems. One is the Lynden-Bell (LB) entropy maximization analysis that introduced violent relaxation. Since we do not use the Stirling approximation, which is invalid at small occupation numbers, our systems have finite mass, unlike LB's isothermal spheres. (Instead of Stirling, we utilize a very accurate smooth approximation for ln x{exclamation_point}.) The second analysis extends entropy production extremization to self-gravitating systems, also without the use of the Stirling approximation. In addition to the LB statistical family characterized by the exclusion principle in phase space, and designed to treat collisionless systems, we also apply the two approaches to the Maxwell-Boltzmann (MB) families, which have no exclusion principle and hence represent collisional systems. We implicitly assume that all of the phase space is equally accessible. We derive entropy production expressions for both families and give the extremum conditions for entropy production. Surprisingly, our analysis indicates that extremizing entropy production rate results in systems that have maximum entropy, in both LB and MB statistics. In other words, both thermodynamic approaches lead to the same equilibrium structures.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of atomic size mismatch and chemical complexity on the local lattice distortion of BCC solid solution alloys

Here, the effects of atomic size mismatch and chemical complexity on the local lattice distortion of solid-solution alloys VNbTa, TiVNbMo, TiVNbMoTa and TiVNbMoTaWRe with body-centered cubic (BCC) structure are quantitatively studied with time-of-flight neutron total scattering, extended X-ray absorption fine structure (EXAFS) measurements and first principles calculations. Neutron atomic pair distribution function (PDF) measurements found that the local lattice distortion in the ternary solid-solution alloy VNbTa is 1.1 %, obviously larger than that of the most complicated solid-solution alloy (0.27% for TiVNbMoTaWRe). Our results suggested that atomic size mismatch in high entropy alloys is more critical to the local lattice distortion than chemical complexity. Both EXAFS analysis and theoretical calculations indicate that there is a maximum of ~4 % difference between the bonding length of different atomic pairs in VNbTa.

36 MATERIALS SCIENCE↗

Interstitial Atoms and the Frustrated and Allowed Structural Transitions Principle: Tunability in the Electronic Structure of AuCu 3 ‐type Frameworks in Dy 4 T 1− x Ga 12 (T = Ag, Ir)

In this Article, we explore how the chemical pressure (CP) features of an intermetallic phase may provide opportunities to couple perturbations in electron count with the stabilization of the underlying geometrical structure. AuCu 3 ‐type LnGa 3 (Ln = lanthanide or group 3 metal) phases contain octahedral cavities of negative CP held open by overly compressed Ln–Ga interactions, leading to a series of transition metal‐stuffed derivatives. We present new additions to this family with the synthesis and crystal structures of Dy 4 T 1−x Ga 12 with (T, x) = (Ag, 0.29) and (Ir, 0.15), adopting Y 4 PdGa 12 ‐type superstructures of the AuCu 3 ‐type. density functional Ttheory (DFT)‐CP calculations, when adjusted to avoid dipolar CP features, affirm that T atom incorporation provides a mechanism for the relief of packing tensions, while electronic density of states distributions illustrate that the T atoms serve largely as electron or hole donors to the band structure, as needed for them to attain d 10 configurations. The maximum obtainable value for x may be limited by a mismatch between the Fermi energy and pseudogap, in line with the balance of factors envisioned by the frustrated and allowed structural transitions principle. Furthermore, trends in resistivity measurements on T = Ir, Pd, and Ag compounds are interpretable in terms of the varying degrees of disorder arising from x < 1.0.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tokamak elongation – how much is too much? Part 1. Theory

In this and the accompanying paper, the problem of the maximally achievable elongation κ in a tokamak is investigated. The work represents an extension of many earlier studies, which were often focused on determining κ limits due to (i) natural elongation in a simple applied pure vertical field or (ii) axisymmetric stability in the presence of a perfectly conducting wall. The extension investigated here includes the effect of the vertical stability feedback system which actually sets the maximum practical elongation limit in a real experiment. A basic resistive wall stability parameter, γτ w , is introduced to model the feedback system which although simple in appearance actually captures the essence of the feedback system. Elongation limits in the presence of feedback are then determined by calculating the maximum κ against n=0 resistive wall modes for fixed γτ w . The results are obtained by means of a general formulation culminating in a variational principle which is particularly amenable to numerical analysis. The principle is valid for arbitrary profiles but simplifies significantly for the Solov’ev profiles, effectively reducing the 2-D stability problem into a 1-D problem. Finally, the accompanying paper provides the numerical results and leads to a sharp answer of ‘how much elongation is too much’?

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electronic structure of C and N co-doped TiO{sub 2}: A combined hard x-ray photoemission spectroscopy and density functional theory study

We have studied the electronic structure of C and N co-doped TiO{sub 2} using hard x-ray photoelectron spectroscopy and first-principles density functional theory calculations. Our results reveal overlap of the 2p states of O, N, and C in the system which shifts the valence band maximum towards the Fermi level. Combined with optical data we show that co-doping is an effective route for band gap reduction in TiO{sub 2}. Comparison of the measured valence band with theoretical photoemission density of states reveals the possibility of C on Ti and N on O site.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A self-adaptive-grid method with application to airfoil flow

A self-adaptive-grid method is described that is suitable for multidimensional steady and unsteady computations. Based on variational principles, a spring analogy is used to redistribute grid points in an optimal sense to reduce the overall solution error. User-specified parameters, denoting both maximum and minimum permissible grid spacings, are used to define the all-important constants, thereby minimizing the empiricism and making the method self-adaptive. Operator splitting and one-sided controls for orthogonality and smoothness are used to make the method practical, robust, and efficient. Examples are included for both steady and unsteady viscous flow computations about airfoils in two dimensions, as well as for a steady inviscid flow computation and a one-dimensional case. These examples illustrate the precise control the user has with the self-adaptive method and demonstrate a significant improvement in accuracy and quality of the solutions.

Nakahashi, K.↗

Lattice dynamics in perovskite halides CsSn X 3 with X = I , Br , Cl

The first-principles linear response approach is used within the local-density approximation to calculate the full phonon band structures and phonon density of states (DOS) of CsSnX 3 (X=Cl, Br, or I) in different phases. The relations between soft phonon modes and phase transitions are investigated. We find soft phonon modes only in the cubic and tetragonal phases, not in the orthorhombic and monoclinic phases. A dispersionless soft phonon branch spreads from the k point M to R in the Brillouin zone of the cubic phase. The lower symmetry tetragonal phase results from the condensation of the soft phonon mode at the k point M. Additionally, the condensation of the soft phonon mode at the k point Z in the Brillouin zone of tetragonal phase results in the orthorhombic γ phase. To facilitate comparison with experimental data, we calculate infrared spectra for the cubic phase. At this point only a limited comparison with experimental data is possible. We find that the calculated modes agree with the available experimental data when we assign the second and third calculated modes to the experimental first and second modes. The lowest calculated mode is at a frequency where the phonon DOS has a maximum value. So the strong phonon-phonon interaction results in short phonon lifetime or strong broadening, which could explain why this mode has not been observed. Our first-principles calculated IR spectra show that the third observed mode in IR absorption is actually the highest longitudinal optical (LO) rather than transverse optical mode. We show, furthermore, that a strong LO-plasmon coupling may be expected in these materials and can explain observed Raman data for CsSnI 3 .

36 MATERIALS SCIENCE↗