Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lifecycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Balancing Water Sustainability and Productivity Objectives in Microalgae Cultivation: Siting Open Ponds by Considering Seasonal Water-Stress Impact Using AWARE-US

Microalgae have great potential as an energy crop. Scaling-up algal biofuel production in the United States (US) should be done with careful attention to water stress. This study evaluates the regional and seasonal water-stress impact of potential algae-pond deployments in the US. Three site-selection strategies focusing on biomass yield, water-use efficiency (WUE), and water-stress impact, respectively, are applied and compared to meet a US algae biomass production target of 30 million metric tons/yr ash-free dry weight, which converts to 20.8 billion L renewable diesel, via hydrothermal liquefaction. Ranking algae ponds based on biomass yield leads to freshwater consumption of 2.66 km3/yr, resulting in the highest water-stress impact (39.1 US equivalent km3). Under the WUE scenario, water consumption is reduced by 81%, but biomass yield is reduced by 12%. In contrast, adding a water-stress constraint to the biomass-yield ranking reduces water consumption by 50% and water-stress impact by 97%, with a small yield reduction (1.7%). Results show that pond location has a significant effect on water stress and that water stress is not proportional to water consumption or yield. Furthermore, capturing seasonal water patterns is critical for planning because sites in water-abundant regions can have short-term but significant water-stress impacts.

algae, Biofuel, water scarcity footprint, hydrothe↗
DOE OSTI2025

Conversion of Waste PET Plastic to Aramid Fiber

A three-step synthesis was used to convert waste polyethylene terephthalate (PET) into the high value polymer, poly-para-phenylene terephthalamide (PPTA), used in the production of high strength aramid fiber, such as Kevlar. Improvements to the polymerization reaction by addition of calcium chloride to the solvent, N-methyl-2-pyrrolidone (NMP), and rigorous anhydrous conditions enabled the production of a PET-derived PPTA with a 4.15 dL/g inherent viscosity in sulfuric acid that is amenable to fiber spinning. PPTA fibers were spun using a wet spinning apparatus under varied process parameters to assess their impact on fiber surface morphology, diameter, and the mechanical properties of the fibers. Select fibers were subjected to a post-spinning heat treatment at 150 °C , which improved the tensile strength and modulus by 100% and 30%, respectively, relative to the as-spun fibers. Techno-economic and life cycle analyses were conducted to evaluate the economic feasibility and the life-cycle greenhouse gases (GHG) emissions of the approach. In conclusion, the results suggest the potential for up to a 30% cost reduction, and comparable GHG emissions against conventional petroleum-based processes.

Lifecycle Analysis↗
DOE OSTI2023

Tackling Grand Challenges in Wind Energy through a Socio-Technical Perspective

Wind power has an important role to play in tackling climate change. Key challenges in wind energy science and innovation must be overcome to increase the penetration and capability of this technology. However, the success of these efforts heavily depends on how society engages with the development of wind power infrastructure. Consequently, grand challenges exist in both technical and social domains, yet little research has made substantial efforts in connecting them. Here we review the social science and humanities literature on wind energy to illustrate the social dimensions of previously identified technical challenges. We suggest that a socio-technical lens enables an interdisciplinary approach to overcome the prevalent tendency of silo thinking in wind energy research and use it to explore socio-technical grand challenges related to the design, planning, development, operational and end-of-life phases of wind energy. Finally, we provide an outlook for research, practice and innovation, including an interdisciplinary and socio-technical research agenda for wind energy science, renewable energy developments and science policy in general.

end-of-life↗
DOE OSTI2022

Recovering Rare Earth Elements from Coal Mine Drainage Using Industrial Byproducts: Environmental and Economic Consequences

Coal mine drainage (CMD) impairs tens of thousands of kilometers of U.S. waterways each year, in part with the leaching of low concentrations of rare earth elements (REEs). REEs are essential for modern technologies, yet economically viable natural deposits are geospatially limited, thus engendering geopolitical concerns, and their mining is energy intense and environmentally destructive. This work summarizes laboratory-scale experimentalresults of a trap-extract-precipitate (TEP) process and uses the mass and energy balances to estimate the economic costs and environmental impacts of the TEP. The TEP process uses the alkalinity and filtering capacity of stabilized flue gas desulfurization (sFGD) material or water treatment plant (WTP) sludge to remediate CMD waters and extract REEs. Passive treatment systems that use WTP sludge are cheaper than those that use sFGD material ($\$$89,300/year or $\$$86/gT-REE vs. $\$$89,800/year or $\$$278/gT-REE) and have improved environmental performance across all indicators from two different impact assessment methods. These differences are largely attributable to the larger neutralizing capacity of WTP sludge in the treatment application.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Greenhouse gas emissions from the global transportation of crude oil: Current status and mitigation potential

Global crude-oil transportation contributes a significant portion of greenhouse gas (GHG) emissions in the marine transportation sector. In this work, we first compile a detailed country-level global crude-oil transportation network in 2018 and estimate that the direct and well-to-hull GHG emissions related to crude transportation were 97 and 109 million metric tons, respectively. Combining with the country-specific crude recovery GHG intensities, the consumption-based well-to-country-gate crude-oil GHG intensities are derived for individual countries, ranging from 2.99 to 27.32 g CO 2 eq/MJ, with a global crude-volume-weighted average of 8.67 g CO 2 eq/MJ. We then project the global crude transportation emissions at the regional level in 2050 under a static (no change) scenario (based on current ship energy efficiency) and a sustainable-development (SD) scenario (based on the International Energy Agency's projections of ship energy efficiency and penetration of alternative marine fuels). Results show that the global well-to-hull GHG emissions related to crude transportation would be 82 and 59 million metric tons in 2050 in the static and SD scenarios, respectively. To further evaluate the impact of potential fuel-switching on decarbonizing the crude oil transportation sector, we estimate the GHG emissions for 20 fuel/production options in 2050. We find that, in comparison to the static scenario, ~50% reduction in global well-to-hull GHG emissions from crude transportation could be achieved under the SD scenario if green ammonia further replaces conventional ammonia. The methodology developed here can be applied to other commodities to estimate the emissions associated with their global marine transportation and to evaluate the potential emission mitigation options.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Reproduced Computational Results Report for “Ginkgo: A Modern Linear Operator Algebra Framework for High Performance Computing”

The article titled “Ginkgo: A Modern Linear Operator Algebra Framework for High Performance Computing” by Anzt et al. presents a modern, linear operator centric, C++ library for sparse linear algebra. Experimental results in the article demonstrate that Ginkgo is a flexible and user-friendly framework capable of achieving high-performance on state-of-the-art GPU architectures. In this report, the Ginkgo library is installed and a subset of the experimental results are reproduced. Specifically, the experiment that shows the achieved memory bandwidth of the Ginkgo Krylov linear solvers on NVIDIA A100 and AMD MI100 GPUs is redone and the results are compared to what presented in the published article. Upon completion of the comparison, the published results are deemed reproducible.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Jamaican Domestic Ethanol Fuel Feasibility and Benefits Analysis

The Government of Jamaica asked the National Renewable Energy Laboratory (NREL) to determine if the use of domestically produced ethanol motor fuel could help them achieve their goals to develop its economy and to reduce greenhouse gas (GHG) emissions. The first step was to determine how much ethanol could be used by Jamaican vehicles in blends of 10% (E10 – current blend level), 15% (E15), or 25% (E25). All blend levels make for feasible automotive fuels and are being used or pursued in multiple countries. Building on gross domestic product (GDP)-related projections made by the Johnson et al. (2019) business as usual scenario, the quantity of ethanol to be used in future years and blend levels is shown in Table ES1. All blend levels are assumed to achieve the same volumetric fuel economy because of verified efficiency improvements enabled by increased octane levels.

09 BIOMASS FUELS↗
DOE OSTI2024

Bioblendstocks to Optimize Mixing Controlled Compression Ignition (MCCI) Engines

In this project, a team of researchers from the University of Massachusetts Lowell, the University of Maine, and Mainstream Engineering developed an integrated process for the product of bioblendstocks to optimize mixing controlled compression ignition (MCCI) engines. The objective was to improve the energy density, sooting propensity, and cetane number of base diesel fuel while maintaining cold weather behavior. The process converts woody biomass (e.g. sawmill residues) into bio-oil through selective fast pyrolysis; the bio-oil is then selectively upgraded to form selectively oxygenated, minimally-branched hydrocarbons using non-noble metal catalysts in combination with metal-catalyzed hydrogenation. Advanced predictive models, in conjunction with existing property databases, and experimental testing are used to evaluate overall bioblendstock properties and their impact on base diesel fuel. An iterative, targeted upgrading approach was implemented to optimize the proposed bioblendstock’s properties. Assessment methodologies included techno-economic analysis, life-cycle assessment, property testing, and engine testing. Ultimately, the project team successfully produced a viable bioblendstock while identifying critical process points related to scale-up efforts. It was found that producing pyrolysis oils at 500 degrees C and with pine particle sizes of 1-2 mm led to bio-oil with a higher yield (of approximately 45 wt%) and rich amounts of aromatic alcohols. The resultant pyrolysis oil was then upgraded using a sequence of mild hydrotreating, followed by catalytic etherification and esterification, followed by another final mild hydrotreating to produce a blendstock containing saturated species with a limited, but non-zero, amount of oxygen. The aromatic alcohols produced by pyrolysis were especially helpful in this regard, as the resulting bicycloethers and derivatives exhibited high cetane numbers. While most bulk properties of the bioblendstock met or exceeded targeted thresholds, viscosity and cloud point notably fell outside the expected range; this could be addressed by blending limits and/or through the use of additives that are commonplace in current refinding practices. Identification of a bioblendstock that can be produced economically at scale while improving the performance and emissions characteristics of internal combustion engines positively affects the economy by boosting domestic fuel production and the environment by decreasing harmful emissions and increasing efficiency.

09 BIOMASS FUELS↗
DOE OSTI2026

Williston basin associated co 2 storage field laboratory

The Williston Basin Associated CO 2 Storage Field Laboratory (WBCFL), led by the Energy & Environmental Research Center (EERC) in partnership with Denbury (now ExxonMobil), was established to advance understanding of CO 2 enhanced oil recovery (EOR) and associated geologic CO 2 storage in the Williston Basin. The specific objective of the WBCFL was to conduct field and laboratory activities to inform decisionmakers regarding the 1) efficacy of associated storage in stacked geologic reservoirs during EOR operations; 2) CO 2 injectivity, oil production, and storage in residual oil zones (ROZs); 3) use of a novel CO 2 storage monitoring, verification, and accounting (MVA) technology (active seismoelectric [ASE] monitoring), and 4) life cycle and techno-economic factors for EOR development scenarios targeting ROZs. The project location was the Pennel Field in southeast Montana, which is part of the Cedar Creek Anticline (CCA) geologic structure within the Williston Basin.

02 PETROLEUM↗
DOE OSTI2026

Development of Composite Photocatalyst Materials that are Highly Selective for Solar Hydrogen Production and their Evaluation in Z-Scheme Reactor Designs

The key technology gap preventing a vertically stacked dual-bed particle suspension reactor from achieving the DOE MYRD&D ultimate cost target for H 2 production remains the lack of materials in particle form factor that exhibit ≥10% solar-to-H 2 energy conversion (STH) efficiency as a suspension. Therefore, our project goals centered around strategies to increase the STH efficiency by enhancing photophysical properties of perovskite oxide particles including increased visible-light absorption, increased selectivity for electrocatalysis of the H 2 evolution reaction (HER) and the O 2 evolution reaction (OER) through development of ultrathin oxide coatings, correlating composition and structure to function, and improving understanding of multiscale transport and kinetic processes.

08 HYDROGEN↗
DOE OSTI2023

The Impact of Carbonation Curing on the Fatigue Behavior of Polyvinyl Alcohol Engineered Cementitious Composites (PVA-ECC)

Use of Engineered Cementitious Composites (ECC) has been proven to enhance structural fatigue resistance and reduce the use-phase emissions for transportation infrastructure. Carbonation curing offers an opportunity to reduce the embodied carbon of ECC via direct CO 2 sequestration. In this study, the impact of carbonation curing on ECC’s fatigue resistance was examined. ECC’s CO 2 uptake, static flexural behavior, flexural fatigue performance, and single fiber pull-out behavior were studied experimentally. Midspan deflection up to 3 million cycles under fatigue load, fatigue stress-life relationship, and failure mechanism for carbonation-cured and air-cured ECC were investigated. Carbonation curing was found to significantly improved the fatigue life of ECC and lowered the midspan deflection under the same stress. Further, CO 2 -cured ECC can achieve >20% CO 2 uptake per cement mass after 24-hour carbonation curing. Carbonation curing increased ECC’s flexural strength by 32% and promoted crack width control capability, with maximum post-fatigue crack width reduced from 148 μm to 76 μm. As a result, the positive impact of carbonation curing on the fatigue behavior of ECC simultaneously lowers the embodied and operational carbon of ECC structural members subjected to fatigue loading during service.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Refining Control, Charging, and Battery Chemistry for CO 2 e Savings in Heavy-Duty Off-Road Plug-In Series Hybrid

With current and future regulations continuing to drive reductions in carbon dioxide equivalent (CO 2 e) emissions in the on-road industry, the off-road industry is also likely to be regulated for fuel and CO 2 e savings. This work focuses on converting a heavy-duty off-road material handler from a conventional diesel powertrain to a plug-in series hybrid, achieving a 49% fuel reduction and 29% CO 2 e reduction via simulation. Control strategies were refined for energy savings, including a regenerative braking strategy to increase regenerative braking and a load-following hydraulic strategy to decrease electrical energy consumption. The load-following hydraulic control shuts off the hydraulic electric machine when it is not needed—an approach not previously seen in a load-sensing, pressure-compensated system. Furthermore, these strategies achieved a 24.1% fuel savings, resulting in total savings of 61% in fuel and 41% in CO 2 e in the plug-in series compared to the conventional machine. Beyond control strategies, this study evaluated battery chemistry and charging strategy refinements for total cost of ownership (TCO) and lifetime CO 2 e. LFP batteries emerged as the most cost-effective and least emitting due to their longer lifespan, which reduced replacement frequency. Charging comparisons showed that Level 2 charging (L2C) typically resulted in lower TCO but higher lifetime CO 2 e than DC fast charging (DCFC). DCFC costs were heavily influenced by local demand charges, and DCFC emissions were heavily influenced by local grid emissions.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Fleet-Level Energy and Emissions Analysis of the US Off-Road Sector with VISION: Off-Road

In the United States (US), the off-road sector (i.e., agriculture, construction, etc.) contributes to approximately 10% of the country’s transportation greenhouse gas (GHG) emissions, similar to the aviation sector. The off-road sector is extremely diverse; as the EPA MOVES model classifies it into 11 sub-sectors, which include 85 different types of equipment. These equipment types have horsepower ranging from 1 to greater than 3000 and have very different utilization, which makes decarbonization a complex endeavor. To address this, Argonne’s on-road vehicle fleet model, VISION, has been expanded to the off-road sector. The GHG emission factors for several energy carriers (biofuels, electricity, and hydrogen) have been incorporated from Argonne’s GREET model for a sector-wide well-to-wheel (WTW) GHG emissions analysis of the present and future fleet. Several technology adoption and energy decarbonization scenarios were modeled to better understand the appropriate actions required to drive towards net-zero emissions of the off-road sector. Results show that WTW decarbonization up to 67% can be achieved from 2023 to 2050 in a business-as-usual scenario. But with aggressive sales increases of electric and hydrogen powertrains, WTW decarbonization up to 77% can be achieved, which can further increase to 85% if electricity production is aggressively decarbonized by 2035.

lifecycle↗
DOE OSTI2022

Short-Lived Modules Need to be Efficient, Lightweight, and Circular for the Energy Transition

Deployment projections for decarbonizing the grid predict 1.75 TW of PV is needed in the United States by 2050. This entails a cumulative demand of 97 million metric tonnes of virgin materials for c-Si modules. These material needs are extraction and energy intensive, making them a key target for improving PV sustainability. Emerging PV technologies, such as perovskites, are targeting 15-year modules, high efficiencies, and circular designs. Previous analysis found that by just modifying the life expectancy to 15 years (keeping target c-Si efficiencies and BOM), an additional 1.4 TW of replacement modules are required to maintain capacity, increasing virgin material demand by 1.75x unless >95% closed-loop recycling is maintained. This study examines the effect of achieving higher efficiencies with thin-film designs and a 15-year expectancy. Higher efficiencies and thin film designs can decrease deployment and material demands, making the level of circularity more attainable. If BOM mass is reduced by 50%, closed-loop recycling rates need to be >80% to reduce virgin material demands compared to a 35-yr c-Si module. If module efficiencies are 30%, closed-loop recycling rates can be reduced to 65%. This efficiency increase also reflects that 1500 million fewer modules can be deployed, however, this is still 2000 million more modules than a 35-year module needs to deploy to achieve energy transition targets, and no PV technology is closed-loop recycled for all component materials.

circular economy↗