SEARCH · Engineering Papers

Results for “lead optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

DOE OSTI2023

The Effects of Lithium Ions and pH on the Function of Polyacrylic Acid Binder for Silicon Anodes

Binder plays a critical role in the performance of silicon anodes for lithium-ion batteries, specifically by connecting particles of active material and promoting adhesion to the current collector. Recent studies have differed on the relative cycle life of silicon anodes made from water-based polyacrylic acid (PAA) vs LiOH-PAA binders. Differences between the two may be due to the pH value or the extra Li + in the binder, both of which change when LiOH is added to PAA. Here we investigate the impact of these two variables on the performance of silicon anodes. Regarding the effect of Li + , cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) results confirm our hypothesis that the extra Li + facilitates ion transport. Regarding pH, we find that high pH in binders is detrimental to the electrode mechanical integrity, as observed in peeling tests and cross-sectional imaging. However, viscosity tests reveal that increased pH benefits the coating and mixing process. Further, our cycling results show that LiOH-PAA binder maintains greater cell capacity than does PAA, and further that LiOH-PAA at pH 4.5 leads to a cell with the highest capacity. Therefore, an intermediate pH is an optimal compromise between benefits observed for the low and high pH experiments.

25 ENERGY STORAGE↗

DOE OSTI2020

Design, Development and Testing Plan for Energy Efficiency Algorithms Related to Building-Integrated Cooling, Heating, and Power Systems

Building-integrated cooling, heating and power (CHP) systems are more efficient than conventional systems at providing local power and thermal energy, and favorable fuel prices are bound to spur their increased adoption. It is estimated that the total CHP technical potential in the commercial building sector is approximately 76 GW, but only a small fraction of it is actually deployed. Advanced control and monitoring systems that realize the full potential of these CHP systems can transform this capacity into an asset for both the owner and the grid and also accelerate the adoption of these systems in the building sector. However, to realize the full benefit of the CHP systems, we must ensure persistence of energy efficient operations. It has been demonstrated by several studies that as much as 30% of building energy use is wasted. Much of the waste results from the inability to anticipate load variations (design day vs. non-design day operations; diurnal variation of loads), identify improper operation, and efficiently operate, control and maintain building systems. Moreover, many buildings, even those with adequate control infrastructure, lack knowledgeable staff to operate and maintain energy systems. Operators of buildings with CHP systems will constantly need to make tradeoffs (economic dispatch) between onsite power generation and purchasing power, between onsite heat production from distributed generation versus heating/cooling from conventional systems, and different passive and active load management measures. Much of the inefficiency in the current building operations can be eliminated by use of automated performance monitoring (PM), real-time commissioning verification (CxV) and automated fault detection and diagnostic (AFDD) tools. Automation can help system operators make intelligent decisions. Remote and continuous monitoring of system conditions and performance will enable better management and integration of CHP with existing building systems. Continuous PM, real-time CxV and AFDD could alleviate burdens for operations staff, enhance operations and maintenance (O&M), and improve reliability of building and CHP systems. To address the O&M challenges and to provide a means to maximize the rate-of-return of building-integrated CHP systems, the Building Technologies Office (BTO) within the U.S. Department of Energy’s (DOE’s) Office of Energy Efficiency and Renewable Energy (EERE) initiated a project to design, develop, and field test a VOLTTRON™-based supervisory controller and associated open-source algorithms. These algorithms will ensure real-time optimal operation of a building-integrated CHP system, support electric grid reliability, and lead to achieving the goal of a clean, efficient, reliable and affordable next-generation integrated energy systems. This report lists the components for which PM, real-time CxV and AFDD algorithms will be developed, how the algorithms will be tested, and metrics that will be used to validate the algorithms and easy of deployment. Deployment of these algorithms in the field will result in savings reduction in energy consumption of between 10% and 20%.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2020

Implementation Plan for Combined Heat and Power Systems VOLTTRON Controller: Performance Monitoring and Real-Time Commissioning Algorithm Verification

Building-integrated cooling, heating, and power (CHP) systems are more efficient than conventional systems at providing local power and thermal energy, and favorable fuel prices are bound to spur their increased adoption. However, to realize the full benefit of the CHP systems, we must ensure persistence of energy efficient operations. Much of the inefficiency in the current building operations can be eliminated by use of automated performance monitoring (PM), real-time commissioning verification (CxV) and automated fault detection and diagnostic (AFDD) tools. Automation can help system operators make intelligent decisions. Remote and continuous monitoring of system conditions and performance will enable better management and integration of CHP with existing building systems. Continuous PM, real-time CxV, and AFDD could alleviate burdens for operations staff, enhance operations and maintenance (O&M), and improve reliability of building and CHP systems. To address the O&M challenges and to provide a means to maximize the rate-of-return of building-integrated CHP systems, the Building Technologies Office (BTO) within the U.S. Department of Energy’s (DOE’s) Office of Energy Efficiency and Renewable Energy (EERE) initiated a project to design, develop, and field test a VOLTTRON™-based supervisory controller and associated open-source algorithms. These algorithms will ensure real-time optimal operation of a building-integrated CHP system, support electric grid reliability, and lead to achieving the goal of clean, efficient, reliable, and affordable next-generation integrated energy system. Previous report listed the components for which PM, real-time CxV, and AFDD algorithms will be developed, how the algorithms will be tested, and the metrics that will be used to validate the algorithms and their ease of deployment. Deployment of these algorithms in the field will result in a reduction in energy consumption of between 10% and 20% (for both CHP and conventional building systems). This report builds upon the previous report by detailing the process by which PNNL will implement performance monitoring and real-time commissioning algorithms for CHP systems in conjunction with the use of the VOLTTRON CHP economic dispatch agent in host facilities.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2023

Automated tracking of prefabricated components for areal-time evaluator to optimize and automateinstallation

Trade associations for prefabricated construction estimate that about 50% of prefabricated wall projects have alignment problems that lead to defects and rework. Additionally, component installation times average between 30 and 60 minutes per component. To address these issues, a real-time evaluator (RTE) system was introduced to decrease cost and automate prefabricated component installation by reducing the installation time, decreasing rework, and enhancing energy performance through higher installation quality. The RTE uses commonly available hardware and software to perform autonomous tracking to measure the real-time location and orientation of components as they are crane-lifted and installed. The hardware, software, and algorithms that allow the autonomous tracking of components are detailed. An algorithm to automate the initial search for a component with three attached retroreflectors is proposed. Algorithms to automate the measurement of component position and orientation are also proposed. Simple lab-scale proof-of-concept experiments were conducted to assess the algorithms for automation of component searching, measurement of real-time movement, and measurement of component orientation. With additional development, the system can be used as a tool to generate the commands for autonomous crane operation or single-task construction robots.

Hayes, Nolan↗

DOE OSTI2024

Scaling Decarbonization Development Innovation with Emerging Community-Based Developers: Preprint

The building real estate development industry is being asked to lead in delivering building decarbonization solutions across the United States. However, creating decarbonized best practices and development innovation while increasing developer diversity and community ownership is often not a primary focus of this sector. To address these issues, we have created an incubator and support ecosystem specifically for the innovation scaling we have found in a leading group of emerging, small-scale developers. These leaders are not just working at the forefront of decarbonized development but addressing diversity and bolstering community generational wealth. We have found that small development firms are the ones who often take risks to innovate and demonstrate despite lacking a specific set of resources or support ecosystems focused on emerging decarbonization developers. Those with the fewest resources are being asked to lead our decarbonization innovation efforts. This paper documents the necessity of a cohort and incubator program to provide a decarbonization-specific ecosystem to support small developers and scale innovation. The incubator creates connections, fosters innovative strategies to access incentives and alternative funding, and assembles resources for small and emerging minority developers with the goal of sustainability and affordability. For instance, collaborative efforts with leading developers and utilities can enable the seamless integration of distributed energy resources through optimal metering and interconnection and significantly reduce the utility cost of electrification, benefiting the utility, the developer, and the tenant economically. The process described in this paper will result in case studies and how-to resources to provide tangible examples of innovation within the emerging development field.

carbon↗

DOE OSTI2022

Laminated Permanent Magnets Enable Compact Magnetic Components in Current-Source Converters

Magnetic components have become one of the primary barriers to high power density converters, especially to current-source converters (CSCs). In CSCs, the inductors/transformers have a predominantly dc flux to store energy, which can be offset by standard permanent magnets (PMs). However, eddy currents in standard PMs induce significant losses and thermal stress for medium-frequency applications. This article proposes using laminated PMs to offset the dc flux while reducing eddy currents, leading to significant reductions in the size, cost, and losses of inductors/transformers. Furthermore, the laminated PMs’ optimal location, orientation, and distribution are investigated to generalize this approach for maximum benefits. Here, three-dimensional finite-element analysis simulation and hardware experiments are presented to validate the effectiveness of the proposed approach in a medium-frequency transformer (MFT) for CSCs. Compared with standard PMs, the proposed use of laminated PMs reduces aggregate core-plus-PM losses by 85% in experiments, and thus, relaxes the MFT thermal design. Finally, the proposed approach is experimentally validated in a 40 kVA flyback-type MFT for a soft-switching solid-state transformer. Compared to the traditional design without any PMs, the proposed design increases the saturation current by 46% while inducing only 5% more losses, leading to significant savings in magnetics cost and size.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2025

From Structure to Function: Zn/Mn-Modified Maghemite as an Advanced Nanoplatform for Magnetic Hyperthermia and Radionuclide Therapy

The development of nanoplatforms capable of efficient heat generation and stable radionuclide delivery is essential for effective bimodal cancer therapy. Here, in this study, binary (Fe–M) and ternary (Fe–M–M′) metal oxide nanoparticles were synthesized via a polyol method optimized to produce flower-like γ-Fe 2 O 3 (maghemite) structures, with M and M′ representing Zn and/or Mn. Comprehensive structural and magnetic characterization was conducted to explain the relationship between composition, defect structure, and hyperthermic performance. The analyses revealed that cation substitution induced an Fe-site vacancy, primarily at octahedral positions, leading to local structural distortions, as confirmed by powder X-ray diffraction and pair distribution function analysis. The optimized composition, with Zn/Mn/Fe = 0.040:0.182:1, exhibited the highest concentration of vacancies and structural disorder. These vacancies altered the bonding environment, enhancing magnetic interactions at tetrahedral sites while weakening those at the octahedral positions. The resulting multicore nanoflowers (20–63 nm; core size 13–18 nm) displayed strong heating performance, with intrinsic loss power ranging from 0.34 to 5.77 nHm 2 kg –1 . The optimized sample achieved a temperature increase of 30 °C within 2 min and a specific absorption rate of 369 W g –1 . This composition was further coated with citrate (CA) and successfully radiolabeled with 177 Lu, achieving a radiolabeling yield of 92.7% and excellent stability, thus forming a robust nanoplatform for combined magnetic hyperthermia and radionuclide therapy. Biological evaluation of the optimized S5 composition revealed selective cytotoxicity toward HeLa and LS174 cells, while toxicity was significantly lower to A549, A375, and normal MRC-5 cells. Citrate coating of S5 nanoparticles (S5@CA) drastically reduced their cytotoxicity across all tested cell lines (IC 50 > 200 μg mL –1 ), confirming their enhanced biocompatibility for therapeutic applications. In HeLa cells subjected to magnetic hyperthermia, the viability decreased to approximately 84% after 30 min and 61% after 60 min of treatment, demonstrating the sustained hyperthermic effect at a controlled working temperature of 48 °C. These results underscore the effectiveness of cation substitution and vacancy engineering in tailoring the functional properties of maghemite-based nanomaterials for advanced multimodal cancer therapies.

36 MATERIALS SCIENCE↗

DOE OSTI2024

A Model for Optimally Allocating Curbside Space Among Competing Uses

The emergence of various new forms of urban mobility services in recent years is leading to new pressures on curbside space. Municipalities, the entities typically responsible for managing the curbside, are in many instances handling these growing pressures by reallocating portions of the curbside away from traditional uses (such as metered and residential parking) in favor of uses such as ridehailing, scooter and bike-share corrals. As yet, however, such actions are being undertaken on an ad-hoc basis, due to the rapidly growing complexity of the curbside and the lack of standard analytical approaches. This lack of analytical capability is due to the traditional focus of transportation network modeling being focused predominantly on the interaction of supply and demand on links and nodes, with limited focus on link edges (the curbside). In this paper we address this research need by proposing a framework for modeling inter-modal competition for curbside space, inspired by the classical Bid-Rent Model of urban land use, intended to support curb managers to move towards maximizing the aspects of economic welfare that relate to curb access. In the bi-level model, choices made by the curbside manager impact travelers’ mode choices, and vice versa. We then present a simple numerical case study to demonstrate the properties of the proposed model, showing its tractability, flexibility, and intuitive sensitivity to systematic variation in inputs. The framework demonstrates the type of adaptive and evolving approach needed to maximize benefits from increasingly dynamic curb management strategies. The paper concludes with a brief discussion of future research needs to advance this line of inquiry.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2022

Transient Storage Model Parameter Optimization Using the Simulated Annealing Method

Hyporheic exchange in streams is critical to ecosystem functions such as nutrient cycling along river corridors, especially for slowly moving or small stream systems. The transient storage model (TSM) has been widely used for modeling of hyporheic exchange. TSM calibration, for hyporheic exchange, is typically used to estimate four parameters, including the mass exchange rate coefficient, the dispersion coefficient, stream cross-sectional area, and hyporheic zone cross-sectional area. Prior studies have raised concerns regarding the non-uniqueness of the inverse problem for the TSM, that is, the occurrence of different parameter vectors resulting in TSM solution that reproduces the observed in-stream tracer break through curve (BTC) with the same error. This leads to practical non-identifiability in determining the unknown parameter vector values even when global-optimal values exist, and the parameter optimization becomes practically non-unique. To address this problem, we applied the simulated annealing method to calibrate the TSM to BTCs, because it is less susceptible to local minima-induced non-identifiability. A hypothetical (or synthetic) tracer test data set with known parameters was developed to demonstrate the capability of the simulated annealing method to find the global minimum parameter vector, and it identified the “hypothetically-true” global minimum parameter vector even with input data that were modified with up to 10% noise without increasing the number of iterations required for convergence. The simulated annealing TSM was then calibrated using two in-stream tracer tests conducted in East Fork Poplar Creek, Tennessee. In conclusion, simulated annealing was determined to be appropriate for quantifying the TSM parameter vector because of its search capability for the global minimum parameter vector.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Optimizing entanglement and Bell inequality violation in top antitop events

A top quark and an antitop quark produced together at colliders have correlated spins. These spins constitute a quantum state that can exhibit entanglement and violate Bell’s inequality. In realistic collider experiments, most analyses allow the axes, as well the Lorentz frame, to vary event by event, thus introducing a dependence on the choice of event-dependent basis leading us to adopt “fictitious states,” rather than genuine quantum states. The basis dependence of fictitious states allows for an optimization procedure, which makes the usage of fictitious states advantageous in measuring entanglement and Bell inequality violation. In this work, we show analytically that the basis that diagonalizes the spin-spin correlations is optimal for maximizing spin correlations, entanglement, and Bell inequality violation. We show that the optimal basis is approximately the same as the fixed beam basis (or the rotated beam basis) near the t t ¯ production threshold, while it approaches the helicity basis far above threshold. Using this basis, we present the sensitivity for entanglement and Bell inequality violation in t t ¯ events at the Large Hadron Collider (LHC) and a future e + e − collider. Since observing Bell inequality violation appears to be quite challenging experimentally, and requires a large dataset in collider experiments, choosing the optimal basis is crucially important to observe Bell inequality violation. Our method and general approach are equally applicable to other systems beyond t t ¯ , including interactions beyond the Standard Model. Published by the American Physical Society 2025

Cheng, Kun (ORCID:0000000249592997)↗

DOE OSTI2021

Quantifying and attributing time step sensitivities in present-day climate simulations conducted with EAMv1

Abstract. This study assesses the relative importance of time integration error in present-day climate simulations conducted with the atmosphere component of the Energy Exascale Earth System Model version 1 (EAMv1) at 1∘ horizontal resolution. We show that a factor-of-6 reduction of time step size in all major parts of the model leads to significant changes in the long-term mean climate. Examples of changes in 10-year mean zonal averages include the following: up to 0.5 K of warming in the lower troposphere and cooling in the tropical and subtropical upper troposphere, 1 %–10 % decreases in relative humidity throughout the troposphere, and 10 %–20 % decreases in cloud fraction in the upper troposphere and decreases exceeding 20 % in the subtropical lower troposphere. In terms of the 10-year mean geographical distribution, systematic decreases of 20 %–50 % are seen in total cloud cover and cloud radiative effects in the subtropics. These changes imply that the reduction of temporal truncation errors leads to a notable although unsurprising degradation of agreement between the simulated and observed present-day climate; to regain optimal climate fidelity in the absence of those truncation errors, the model would require retuning. A coarse-grained attribution of the time step sensitivities is carried out by shortening time steps used in various components of EAM or by revising the numerical coupling between some processes. Our analysis leads to the finding that the marked decreases in the subtropical low-cloud fraction and total cloud radiative effect are caused not by the step size used for the collectively subcycled turbulence, shallow convection, and stratiform cloud macrophysics and microphysics parameterizations but rather by the step sizes used outside those subcycles. Further analysis suggests that the coupling frequency between the subcycles and the rest of EAM significantly affects the subtropical marine stratocumulus decks, while deep convection has significant impacts on trade cumulus. The step size of the cloud macrophysics and microphysics subcycle itself appears to have a primary impact on cloud fraction in the upper troposphere and also in the midlatitude near-surface layers. Impacts of step sizes used by the dynamical core and the radiation parameterization appear to be relatively small. These results provide useful clues for future studies aiming at understanding and addressing the root causes of sensitivities to time step sizes and process coupling frequencies in EAM. While this study focuses on EAMv1 and the conclusions are likely model-specific, the presented experimentation strategy has general value for weather and climate model development, as the methodology can help researchers identify and understand sources of time integration error in sophisticated multi-component models.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

A Cohesive Deep Drilling Field Strategy for LSST Cosmology

The Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) will image billions of astronomical objects in the wide–fast–deep primary survey and in a set of minisurveys including intensive observations of a group of deep drilling fields (DDFs). The DDFs are a critical piece of three key aspects of the LSST Dark Energy Science Collaboration (DESC) cosmological measurements: they provide a required calibration for photometric redshifts (photo- z ) and weak gravitational lensing (WL) measurements and they directly contribute to cosmological constraints from the most distant Type Ia supernovae (SNe Ia). We present a set of cohesive DDF strategies fulfilling science requirements relevant to DESC and following the guidelines of the Survey Cadence Optimization Committee. We propose a method to estimate the observing strategy parameters and we perform simulations of the corresponding surveys. We define a set of metrics for each science case to assess the performance of the proposed observing strategies. We show that the most promising results are achieved with deep rolling surveys characterized by two sets of fields: ultradeep fields ( z ≲ 1.1) observed at a high cadence with a large number of visits over a limited number of seasons, and deep fields ( z ≲ 0.7), observed with a cadence of ~3 nights for 10 yr. These encouraging results should be confirmed with realistic simulations using the LSST scheduler. A DDF budget of ~8.5% is required to design observing strategies satisfying all the cosmological requirements. A lower DDF budget leads to surveys that either do not fulfill the photo- z /WL requirements or are not optimal for SN Ia cosmology.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

Lion Cub: Minimizing Communication Overhead in Distributed Lion

Communication overhead is a key challenge in distributed deep learning, especially on slower Ethernet intercon nects, and given current hardware trends, communication is likely to become a major bottleneck. While gradient compression techniques have been explored for SGD and Adam, the Lion optimizer has the distinct advantage that its update vectors are the output of a sign operation, enabling straightforward quantization. However, simply compressing updates for communication and using techniques like majority voting fails to lead to end-to-end speedups due to inefficient communication algorithms and reduced convergence. We analyze three factors critical to distributed learning with Lion: optimizing communication methods, identifying effective quantization methods, and assessing the necessity of momentum synchronization. Our findings show that quantization techniques adapted to Lion and selective momentum synchronization can significantly reduce communication costs while maintaining convergence. We combine these into Lion Cub, which enables up to 5x speedups in end-to-end training compared to Lion. This highlights Lion’s potential as a communication-efficient solution for distributed training.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Cleavable Strand‐Fusing Cross‐Linkers as Additives for Chemically Deconstructable Thermosets with Preserved Thermomechanical Properties

Abstract Permanently cross‐linked polymer networks—thermosets—are often difficult to chemically deconstruct. The installation of cleavable bonds into the strands of thermosets using cleavable comonomers as additives can facilitate thermoset deconstruction without replacement of permanent cross‐links, but such monomers can lead to reduced thermomechanical properties and require high loadings to function effectively, motivating the design of new and optimal cleavable additives. Here, we introduce “strand‐fusing cross‐linkers” (SFCs), which fuse two network strands via a four‐way cleavable cross‐link. SFCs enable deconstruction of model polydicyclopentadiene (pDCPD) thermosets with as little as one‐fifth of the molar loading needed to achieve deconstruction using traditional cleavable comonomers. SFCs function under traditional oven curing as well as low‐energy frontal ring‐opening metathesis polymerization (FROMP) conditions and lead to improved thermomechanical properties, for example, glass transition temperatures, compared to prior cleavable comonomer designs. This work motivates the development of increasingly improved cleavable additives to enable thermoset deconstruction without compromising material performance.

Zhang, Shuyi [Department of Chemistry Massachusett↗

DOE OSTI2025

Cleavable Strand‐Fusing Cross‐Linkers as Additives for Chemically Deconstructable Thermosets with Preserved Thermomechanical Properties

Zhang, Shuyi [Department of Chemistry Massachusett↗

DOE OSTI2024

Implementation and validation of optimal start control strategy for air conditioners and heat pumps

Commercial buildings are responsible for approximately 20 % of the total energy consumption and greenhouse gas emissions in the United States. Over 85 % of these buildings lack building automation systems, and many are small (<50,000 square feet), underserved, and use rooftop units (RTUs) for heating, ventilation, and air-conditioning needs. Because these buildings lack proper energy management systems, several operational deficiencies lead to excess energy consumption. Studies have shown that managing the RTUs’ heating and cooling set points, schedules, setbacks, and optimal start can result in a 20 % to 25 % reduction in electricity consumption in small commercial buildings. These buildings typically use fixed schedules to start the RTUs 60 to 120 min before occupancy begins, which results in excess energy consumption. This paper presents research that demonstrates and evaluates the performance of four optimal start methods, which utilize data-based modeling as a key element in facilitating adaptive control in response to time-varying inputs while requiring minimal sensor inputs. The evaluation found energy savings in two commercial buildings equipped with RTUs by periodically alternating four different optimal start models during the cooling and heating season. The resulting energy savings are positive for all models and range from 2 to 5 kWh/day/unit. The units on the east side of the building showed higher savings, while interior units showed greater variability in savings due to the differences in capacities and room sizes. Savings were considerably greater during the heating season compared to the cooling season. The performance of all four models on Mondays was poor; models suggested a shorter optimal start time, which resulted in relatively larger errors. Finally, the future work will look at using a different model for the days after weekends and holidays.

42 ENGINEERING↗

DOE OSTI2024

Development of a Method for Shape Optimization for a Gas Turbine Fuel Injector Design Using Metal-Additive Manufacturing

Adjoint shape optimization has enabled physics-based optimal designs for aerodynamic surfaces. Additive manufacturing (AM) makes it possible to manufacture complex shapes. However, there has been a gap between optimal and manufacturable surfaces due to the inherent limitations of commercial computational fluid dynamics (CFD) codes to implement geometric constraints during adjoint computation. In such cases, the design sensitivities are exported and used to perform constrained shape modifications using parametric information stored in computer aided design (CAD) files to satisfy manufacturability constraints. However, modifying the design using adjoint methods in CFD solvers and performing constrained shape modification in CAD can lead to inconsistencies due to different shape parameterization schemes. This paper describes a method to enable the simultaneous optimization of the fluid domain and impose AM manufacturability constraints, resolving one of the key issues of geometry definition for isogeometric analysis. Similar to a grid convergence study, the proposed method verifies the consistencies between shape parameterization techniques present within commercial CAD and CFD software during mesh movement as a part of the adjoint shape optimization routine. By identifying the appropriate parameters essential to a shape optimization study, the error metric between the different parameterization techniques converges to demonstrate sufficient consistencies for justifiable exchange of data between CAD and CFD. For the identified shape optimization parameters, the error metric to measure the deviation between the two parameterization schemes lies within the AM laser-powder bed fusion (L-PBF) process tolerance. Additionally, comparison for subsequent objective function calculations between iterations of the optimization loop showed acceptable differences within 1% variation between the modified geometries obtained using the two parameterization schemes. This method provides justification for the use of multiphysics guided adjoint design sensitivities computed in CFD software to perform shape modifications in CAD to incorporate AM manufacturability constraints during the shape optimization loop such that optimal designs are also additively manufacturable.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2023

Stochastic Framework for Optimal Control of Planetary Reentry Trajectories Under Multilevel Uncertainties

We present a novel stochastic optimal control framework that accounts for various types of uncertainties, with application to reentry trajectory planning. The formulation of the optimal trajectory control problem is presented in the context of an indirect method where a functional objective associated with the terminal vehicle speed is to be minimized. Uncertain input parameters in the optimal trajectory control model, including aerodynamic parameters and initial and terminal conditions, are modeled as aleatory random variables, while the statistical parameters of these aleatory distributions are themselves random variables. The parametric and model uncertainties are simultaneously propagated through an extended polynomial chaos expansion (EPCE) formalism. Several metrics are described to evaluate response statistics and presented as insightful tools for robust decision making. Specifically, the response probability density function (PDF) reflecting influence of both epistemic and aleatory uncertainties is obtained. By sampling over the random variables representing model error, an ensemble of response PDFs is generated and the associated failure probability is estimated as a random variable with its own polynomial chaos expansion. Besides, the sensitivity index functions of response PDF with respect to the statistical parameters are evaluated. Coupling parametric and model uncertainties within the EPCE framework leads to a robust and efficient paradigm for multilevel uncertainty propagation and PDF characterization in general optimal control problems.

Engineering↗