Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “implosion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Design and modeling of indirectly driven magnetized implosions on the NIF

The use of magnetic fields to improve the performance of hohlraum-driven implosions on the National Ignition Facility (NIF) is discussed. The focus is on magnetically insulated inertial confinement fusion, where the primary field effect is to reduce electron-thermal and alpha-particle loss from the compressed hotspot (magnetic pressure is of secondary importance). We summarize the requirements to achieve this state. The design of recent NIF magnetized hohlraum experiments is presented. These are close to earlier shots in the three-shock, high-adiabat (BigFoot) campaign, subject to the constraints that magnetized NIF targets must be fielded at room-temperature, and use ≲1 MJ of laser energy to avoid the risk of optics damage from stimulated Brillouin scattering. We present results from the original magnetized hohlraum platform, as well as a later variant that gives a higher hotspot temperature. In both platforms, imposed fields (at the capsule center) of up to 28 T increase the fusion yield and hotspot temperature. Integrated radiation-magneto-hydrodynamic modeling with the Lasnex code of these shots is shown, where laser power multipliers and a saturation clamp on cross-beam energy transfer are developed to match the time of peak capsule emission and the P2 Legendre moment of the hotspot x-ray image. The resulting fusion yield and ion temperature agree decently with the measured relative effects of the field, although the absolute simulated yields are higher than the data by 2.0−2.7×. The tuned parameters and yield discrepancy are comparable for experiments with and without an imposed field, indicating the model adequately captures the field effects. Self-generated and imposed fields are added sequentially to simulations of one BigFoot NIF shot to understand how they alter target dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calculating shock Hugoniot and isentropes using multiphase equation of state tables and application to shock and release of diamond ablators in inertial confinement fusion implosions

Advances in shock and ramp compression techniques now allow experimental access to unprecedented extreme conditions of pressure and temperature, providing a means to test theoretical models. Here, we describe a simple methodology to compute multi-phase shock Hugoniot and isentropes using multiphase equation of state tables. We treat explicitly the phase coexistence along the phase boundary to reveal the evolution of the sample as it undergoes the phase transformation in adiabatic conditions. We illustrate the method by calculating the predicted shock and shock-and-release behavior of diamond at conditions relevant for the initial stage of inertial confinement fusion implosions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of Dynamic Behavior of the Target and the Deuterium-Tritium Ice in Magnetic-Field Assisted Implosions

The use of strong magnetic fields to augment the output energy of inertial confinement fusion experiments at the National Ignition Facility is of high interest. It offers the potential of reducing electron thermal conduction and increasing hot-spot alpha heating with little to no change in hohlraum behavior. In these magnetically assisted ignition experiments, the ultimate goal is to add a B-field in the form of a pulse ranging from 25 to 60 T to a high-performing hohlraum implosion several microseconds before impingement of the laser beams. This requires eliminating metallic components in the target and replacing them with electrically nonconducting materials. However, the strong eddy currents generated by the rapidly increasing high B-field, which were calculated to be as high as 2000 K, can heat the hohlraum. Here in this paper, we examine the transient effects of this rapid temperature change on the behavior of the target as well as the fuel layer composed typically of deuterium and tritium. Using simulations and calculations for limiting case scenarios, we find that the effect of the heating is not restrictive toward the performance of the target or the quality of the deuterium-tritium ice.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Implosion Dynamics in Direct-Drive Experiments

Increasing the ablation pressure is a path to achieving cryogenic implosion performance on the OMEGA laser that will hydrodynamically scale to ignition on the National Ignition Facility. An increased ablation pressure will allow a more-massive shell (i.e. thicker and more hydrodynamically stable) and a higher adiabat to achieve ignition-relevant velocities (>3.5 × 10⁷ cm s⁻¹), areal densities (>300 mg cm⁻²) and hot-spot pressures (>100 Gbar). Two approaches have demonstrated increased ablation pressure: (1) a target design is shown that uses a Be ablator to increase the hydrodynamic efficiency, resulting in a ~10% increase in the ablation pressure, in comparison to a CH ablator; (2) reducing the beam size is shown to recover all of the ablation pressure lost to cross-beam energy transfer (CBET), i.e. the ablation pressure calculated without CBET, but the degraded illumination uniformity reduces the integrated target performance. The hydrodynamic efficiency is measured for the current cryogenic design, multiple ablator material design and CH capsule designs with various beam focal-spot sizes. In each case, an excellent agreement is observed with 1D hydrodynamic simulations that include CBET and nonlocal heat-transport models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

3D simulations of inertial confinement fusion implosions part 1: inline modeling of polarized cross beam energy transfer and subsequent drive anomalies on OMEGA and NIF

Inertial confinement fusion experiments are sensitive to cross-beam energy transfer (CBET), a laser-plasma instability that redistributes laser energy in the coronal plasma through self-generated ion acoustic wave (IAW) gratings. The detailed CBET coupling depends on the polarization state of the crossing wavefields. CBET itself can also scramble the beam polarizations by inducing ellipticity through the IAW grating, and rotating the seed polarization toward that of the pump. We develop a ray-based model that describes the polarized CBET coupling and that is compatible with the framework of 3D inline radiative hydrodynamics simulations. The model is implemented in the ASTER/IFRIIT code and verified against an academic test case and an offline polarized CBET post-processor. It is then applied to the detailed configuration of the distributed polarization rotator system on OMEGA, where results highlight how polarized CBET induces significant low modes in the collisional absorption source term. Finally, the modeling is applied to a simple indirect-drive configuration, comparing CBET calculations with 96 unpolarized or polarized beams with 24 unpolarized quads. It is shown that these cases produce similar power amplification per cone of beams grouped with similar polar angles. However, the 96 beam geometry itself is found to reduce azimuthal variations in quad power after the interaction and favors beams with larger polar angles within the cones, an effect that is amplified by the polarized CBET. Application of the model to inline calculations of OMEGA implosions are presented in a companion paper.

3D inline modeling↗

Direct-drive DT implosions with Knudsen number variations

Direct-drive implosions of DT-filled plastic-shells have been conducted at the Omega laser facility, measuring nuclear yields while varying Knudsen numbers (i.e., the ratio of mean free path of fusing ions to the length of fuel region) by adjusting both shell thickness (e.g., 7.5, 15, 20, 30 μm) and fill pressure (e.g., 2, 5, 15 atm). In addition, the fusion reactivity reduction model showed a stronger effect on yield as the Knudsen number increases (or the shell thickness decreases). The Reduced-Ion-Kinetic (RIK) simulation which includes both fusion reactivity reduction and mix model was necessary to provide a better match between the observed neutron yields and those simulated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observation of kinetic mix enhancement in thin-shell OMEGA implosions

Recent separated reactant experiments for thin-shell (6 µ⁢m) shock-driven implosions on OMEGA have demonstrated significant mix from a buried deuterated layer of the shell into the hot spot. Time resolved D 3 He-p reaction history data demonstrate a (50 ± 20)⁢ ps shift earlier in peak nuclear emission for separated reactant experiments relative to control, in contrast to past experimental data for thicker, 20 µ⁢m shells with no laser burn through that show a 75 ps delay due to the time required for hydrodynamic instabilities to develop. This contrast suggests that the mix mechanism was not hydrodynamic. Ion kinetic simulations utilizing fall line analyses show much closer agreement with mix yield and temperature than diffusion models, predicting a D 3 He-p mix yield of 1.7 × 10 9 as compared to the experimental value of 9.3⁢ (±2.1) × 10 8 . This is three orders of magnitude closer than the fall line analysis from a hydrodynamic simulation with an inline diffusive mix model, which suggests minimal mix and D 3 He-p yields of 5×10 5 . This makes kinetic mechanisms the only feasible explanation for the mix seen, demonstrating impact of a non-standard mix mechanism. An analytical model of this kinetic mix mechanism suggests that it can remain significant in situations when the shell expands significantly to low densities, and diffusive models predict negligible mix. Finally, kinetic mix will impact multiple types of high energy density, laser-driven fusion experiments including high-adiabat direct drive cryoexperiments, nuclear cross section experiments, and thin-shell polar direct drive experiments used to tune heat conduction models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of the deuterium-tritium branching ratio based on inertial confinement fusion implosions

The deuterium-tritium (D-T) γ-to-neutron branching ratio [ 3 H(𝑑,γ) 5 He/ 3 H(d,n) 4 He] was determined under inertial confinement fusion (ICF) conditions, where the center-of-mass energy of 14–24 keV is lower than that in previous accelerator-based experiments. A D-T branching ratio value of (4.2 ± 2.0) × 10 −5 was determined by averaging the results of two methods: (1) a direct measurement of ICF D-T γ-ray and neutron emissions using absolutely calibrated detectors, and (2) a separate cross-calibration against the D- 3 He γ-to-proton branching ratio [ 3 He(𝑑,γ) 5 Li/ 3 He(d,p) 4 He]. Neutron-induced backgrounds were significantly reduced as compared to traditional beam-target accelerator-based experiments due to the short pulse nature of ICF implosions and the use of gas Cherenkov γ-ray detectors with fast temporal responses and inherent energy thresholds. These measurements of the D-T branching ratio in an ICF environment test several theoretical assumptions about the nature of 𝐴 = 5 systems, including the dominance of the 3/2 + resonance at low energies, the presence of the broad first excited state of 5 He in the spectra, and the charge-symmetric nature of the capture processes in the mirror systems 5 He and 5 Li.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Validation of implosion modeling through direct-drive shock timing experiments at the National Ignition Facility

Precise modeling of shocks in inertial confinement fusion implosions is critical for obtaining the desired compression in experiments. Shock velocities and post-shock conditions are determined by laser-energy deposition, heat conduction, and equations of state. This paper describes experiments at the National Ignition Facility (NIF) where multiple shocks are launched into a cone-in-shell target made of polystyrene, using laser pulse shapes with two or three pickets and varying on-target intensities. Shocks are diagnosed using the Velocity Interferometric System for Any Reflector diagnostic. Simulated and inferred shock velocities agree well for the range of intensities studied in this work. These results are the first shock-velocity measurements using direct drive on the NIF and provide a good measure of early-time, directly driven laser-energy coupling. Furthermore, the validated models add to the credibility of direct-drive-ignition designs at the megajoule scale.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion separation effects in mixed-species ablators for inertial-confinement-fusion implosions

Recent efforts to demonstrate significant self-heating of the fuel and eventual ignition at the National Ignition Facility make use of plastic (CH) ablators [O. A. Hurricane et al., Phys. Plasmas 21, 056314 (2014)]. Mainline simulation techniques for modeling CH capsule implosions treat the ablator as an average-atom fluid and neglect potential species separation phenomena. The mass-ablation process for a mixture is shown to lead to the potential for species separation, parasitic energy loss according to thermodynamic arguments, and reduced rocket efficiency. A generalized plasma barometric formula for a multispecies concentration gradient that includes collisionality and steady flows in spherical geometry is presented. A model based on plasma expansion into a vacuum is used to interpret reported experimental evidence for ablator species separation in an inertial-confinement-fusion target [J. S. Ross et al., Rev. Sci. Instrum. 83, 10E323 (2012)]. The possibility of “runaway” hydrogen ions in the thermoelectric field of the ablation front is conjectured.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermonuclear ignition and the onset of propagating burn in inertial fusion implosions

Separating ignition of the central hot spot from propagating burn in the surrounding dense fuel is crucial to conclusively assess the achievement of ignition in inertial confinement fusion (ICF). We show that the transition from hot spot ignition to the onset of propagating burn occurs when the alpha heating within the hot spot has amplified the fusion yield by 15 to 25x with respect to the compression-only case without alpha energy deposition. This yield amplification corresponds to a value of the fractional alpha energy ƒ α ≈ 1:4 (ƒ α = 0.5 alpha energy/hot spot energy). The parameter fα can be inferred in ICF experiments by measuring the neutron yield, hot spot size, temperature, and burn width. This ignition threshold is measurable and applicable to all ICF implosions of DT-layered targets both direct and indirect drive. The results of this paper can be used to set the goals of the ICF effort with respect to the first demonstration of thermonuclear ignition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonuniformly Driven Two-Plasmon-Decay Instability in Direct-Drive Implosions

Half-harmonic emission spectra and images taken during directly driven implosions show that the two-plasmon decay (TPD) instability is driven nonuniformly over the target surface and that multibeam effects dominate this instability. The images show a spatially limited extent of the TPD instability. A prominent spectral feature is used to determine the electron temperature in the corona. Near threshold the temperatures agree with one-dimensional hydrodynamic predictions but exceed them by ~10% above the TPD threshold. Two-dimensional hydrodynamic simulations indicate that a significant part (~20%) of the laser intensity must be locally absorbed by the TPD instability (i.e., by collisional damping of the electron plasma waves) to maintain these temperature islands.

Seka, W.↗

Observation of a Reflected Shock in an Indirectly Driven Spherical Implosion at the National Ignition Facility

A 200 μm radius hot spot at more than 2 keV temperature, 1 g=cm3 density has been achieved on the National Ignition Facility using a near vacuum hohlraum. The implosion exhibits ideal one-dimensional behavior and 99% laser-to-hohlraum coupling. The low opacity of the remaining shell at bang time allows for a measurement of the x-ray emission of the reflected central shock in a deuterium plasma. Comparison with 1D hydrodynamic simulations puts constraints on electron-ion collisions and heat conduction. Results are consistent with classical (Spitzer-Harm) heat flux.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion Thermal Decoupling and Species Separation in Shock-Driven Implosions

Anomalous reduction of the fusion yields by 50% and anomalous scaling of the burn-averaged ion temperatures with the ion-species fraction has been observed for the first time in DHe 3 -filled shock-driven inertial confinement fusion implosions. Two ion kinetic mechanisms are used to explain the anomalous observations: thermal decoupling of the D and He 3 populations and diffusive species separation. The observed insensitivity of ion temperature to a varying deuterium fraction is shown to be a signature of ion thermal decoupling in shock-heated plasmas. The burn-averaged deuterium fraction calculated from the experimental data demonstrates a reduction in the average core deuterium density, as predicted by simulations that use a diffusion model. Accounting for each of these effects in simulations reproduces the observed yield trends.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thin Shell, High Velocity Inertial Confinement Fusion Implosions on the National Ignition Facility

Experiments have recently been conducted at the National Ignition Facility utilizing inertial confinement fusion capsule ablators that are 175 and 165 μm in thickness, 10% and 15% thinner, respectively, than the nominal thickness capsule used throughout the high foot and most of the National Ignition Campaign. These three-shock, high-adiabat, high-foot implosions have demonstrated good performance, with higher velocity and better symmetry control at lower laser powers and energies than their nominal thickness ablator counterparts. Little to no hydrodynamic mix into the DT hot spot has been observed despite the higher velocities and reduced depth for possible instability feedthrough. Earlier results have shown good repeatability, with up to 1/2 the neutron yield coming from α-particle self-heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First high-convergence cryogenic implosion in a near-vacuum hohlraum

Recent experiments on the National Ignition Facility [M. J. Edwards et al., Phys. Plasmas 20, 070501 (2013)] demonstrate that utilizing a near-vacuum hohlraum (low pressure gas-filled) is a viable option for high convergence cryogenic deuterium-tritium (DT) layered capsule implosions. This is made possible by using a dense ablator (high-density carbon), which shortens the drive duration needed to achieve high convergence: a measured 40% higher hohlraum efficiency than typical gas-filled hohlraums, which requires less laser energy going into the hohlraum, and an observed better symmetry control than anticipated by standard hydrodynamics simulations. The first series of near-vacuum hohlraum experiments culminated in a 6.8 ns, 1.2 MJ laser pulse driving a 2-shock, high adiabat (α ~ 3.5) cryogenic DT layered high density carbon capsule. This resulted in one of the best performances so far on the NIF relative to laser energy, with a measured primary neutron yield of 1.8 X 10¹⁵ neutrons, with 20% calculated alpha heating at convergence ~27X.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal Temperature Measurements of Inertial Fusion Implosions

Accurate measurement of the thermal temperature in inertially confined fusion plasmas is essential for characterizing ignition performance and validating the basic physics understanding of the stagnation conditions. Here we present experimental results from cryogenic deuterium-tritium implosions on the National Ignition Facility using a differential filter spectrometer designed to measure the thermal electron temperature from x-ray continuum emission from the stagnated plasma. Furthermore, electron temperature measurements, used in conjunction with the Doppler-broadened DT neutron spectra, allow one to infer the partition of energy in the hot spot between internal energy and unconverted kinetic energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observations of Multiple Nuclear Reaction Histories and Fuel-Ion Species Dynamics in Shock-Driven Inertial Confinement Fusion Implosions

Fuel-ion species dynamics in DT 3 He-gas-filled Inertial Confinement Fusion implosion is quantitatively assessed for the first time using simultaneously measured D 3 He and DT reaction histories. Here, these reaction histories are measured with the Particle X-ray Temporal Diagnostic, which captures the relative timing between different nuclear burns with unprecedented precision (~10 ps). The observed 50±10 ps earlier D 3 He reaction history timing (relative to DT) cannot be explained by average-ion hydrodynamic simulations, and is attributed to fuel-ion species separation between the D, T, and 3 He ions during shock convergence and rebound. At the onset of the shock burn, inferred 3 He/T fuel ratio in the burn region using the measured reaction histories is much higher as compared to the initial gas-fill ratio. As T and 3 He have the same mass but different charge, these results indicate that the charge-to-mass ratio plays an important role in driving fuel-ion species separation during strong shock propagation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗