Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “identity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Performance of the Boeing LRV wheels in a lunar soil simulant. Report 2: Effects of speed, Wheel load, and soil

Two nearly identical Boeing-GM wire-mesh Lunar Roving Vehicle (LRV) wheels were laboratory tested in a lunar soil simulant to determine the influence of wheel speed and acceleration, wheel load, presence of a fender, travel direction, and soil strength on the wheel performance. Constant-slip and three types of programmed-slip tests were conducted with a single-wheel dynamometer system. Test results indicated that performance of single LRV wheels in terms of pull coefficient, power number, and efficiency were not influenced by wheel speed and acceleration, travel direction, the presence of a fender, or wheel load. Of these variables, only load influenced sinkage, which increased with increasing load. For a given slip, the pull coefficient and power number increased with increasing soil strength. However, for a given pull coefficient or slope, slip was less in firmer soil; thus, the power number decreased and efficiency increased with increasing soil strength.

Melzer, K.↗
NASA NTRS1972

Circulation of Prince William Sound

The author has identified the following significant results. Visual examination of the available ERTS-1 and NASA NP-3 aircraft imagery has suggested that sediment-laden plumes from rivers may be useful in tracking surface circulation over the regions where these plumes retain their visible identities. Plumes of ice derived from tidewater glaciers are highly visible on the ERTS-1 imagery, but are generally of too small an areal extent to be useful in tracing surface circulation. Shore-fast ice is also highly visible on the ERTS-1 data. Practical scientific results include a corroboration of the westward flow just offshore in the Gulf of Alaska with inflow through Hinchinbrook Entrance into Prince William Sound. The tracer in this case was the Copper River Plume, which originates at the mouth of the Copper River east of Prince William Sound. A single partial image of Port Valdez, in northeastern Prince William Sound, suggests by the visible suspended sediment distribution that surface circulation there was cyclonic, as deduced previously from oceanographic baseline data. Surf along the shoreline of the Gulf of Alaska is highly visible on ERTS-1 imagery.

Muench, R. D.↗
NASA NTRS1972

Development of advanced high strength tantalum base alloys. Phase 3: Influence of metallurgical condition on the mechanical properties of ASTAR-811C sheet

Metallurgical condition was shown to have a significant effect on the creep properties of ASTAR-811C (Ta-8W-1Re-0.7Hf-0.025C) sheet. Cold worked material exhibited creep rates 30 times higher than solution annealed material and 10 times greater than for recrystallized material. Both grain size and the carbide morphology changes as the final annealing temperature was raised from 3000 F to 3600 F. However, the lowest creep rates were achieved for material which retained the high temperature form of the Ta2C precipitate. Samples with GTA weldments had essentially identical properties as recrystallized base metal. Cooling rates from 3600 F of 5, 50, and 800 F deg/min. had little effect on the 2000 and 2400 F creep behavior of ASTAR-811C.

Ammon, R. L.↗
NASA NTRS1973

Hydrogen adsorption and diffusion, and subcritical-crack growth in high strength steels and nickel base alloys

Embrittlement, or the enhancement of crack growth by gaseous hydrogen in high strength alloys, is of primary interest in selecting alloys for various components in the space shuttle. Embrittlement is known to occur at hydrogen gas pressures ranging from fractions to several hundred atmospheres, and is most severe in the case of martensitic high strength steels. Kinetic information on subcritical crack growth in gaseous hydrogen is sparse at this time. Corroborative information on hydrogen adsorption and diffusion is inadequate to permit a clear determination of the rate controlling process and possible mechanism in hydrogen enhanced crack growth, and for estimating behavior over a range of temperatures and pressures. Therefore, coordinated studies of the kinetics of crack growth, and adsorption and diffusion of hydrogen, using identical materials, have been initiated. Comparable conditions of temperature and pressure will be used in the chemical and mechanical experiments. Inconel 718 alloy and 18Ni(200) maraging steel have been selected for these studies. Results from these studies are expected to provide not only a better understanding of the gaseous hydrogen embrittlement phenomenon itself, but also fundamental information on hydrogen adsorption and diffusion, and crack growth information that can be used directly for design.

Wei, R. P.↗
NASA NTRS1972

Digital Holographic Logic

The characteristics of the holographic logic computer are discussed. The holographic operation is reviewed from the Fourier transform viewpoint, and the formation of holograms for use in performing digital logic are described. The operation of the computer with an experiment in which the binary identity function is calculated is discussed along with devices for achieving real-time performance. An application in pattern recognition using neighborhood logic is presented.

Preston, K., Jr.↗
NASA NTRS1973

Land use mapping and modelling for the Phoenix Quadrangle

The author has identified the following significant results. Comparison of 9 x 9 MSS band images and color composites made from bands 4, 5, and 6 showing vegetated areas near Phoenix during the summer and fall seasons aided in definitely establishing that certain land areas were being used as agricultural land and not as rangeland. Agricultural land, which appeared to be fallow, idle, or not irrigated, often became more readily identifiable as agricultural land when comparing different images of identical land areas which have been affected by seasonal vegetation changes. Experimentation with color density slicing portions of 9 x 9 MSS band 7 transparency showing the central urban core of phoenix enabled dense commercial and industrial areas to be separated from less dense urbanized land uses; however, loss of resolution produced results of limited usefulness. The best results in agricultural areas near Sun City were obtained using MSS band 5 imagery. Discrimination of different land uses in both urban and agricultural areas which were color density sliced was not possible to the degree of accuracy necessary to make mapping feasible. Examination of MSS transparencies and color composites allowed updating of a map of land use change in the Phoenix Quadrangle.

Place, J. L.↗
NASA NTRS1973

The inclusion problem for monadic recursion schemes

The inclusion problem for the class of monadic recursion schemes is shown to be undecidable. The proof illustrates the close relationship between monadic recursion schemes and deterministic pushdown automata. The proof is extended to show that both the weak equivalence problem for the class of monadic recursion schemes and the weak equivalence problem for the class of free schemes without identity are undecidable.

Friedman, E. P.↗
NASA NTRS1972

Design of the UCLA general circulation model

An edited version is reported of notes distributed at the Summer Workshop on the UCLA General Circulation Model in June 1971. It presents the computational schemes of the UCLA model, along with the mathematical and physical principles on which these schemes are based. Included are the finite difference schemes for the governing fluid-dynamical equations, designed to maintain the important integral constraints and dispersion characteristics of the motion. Also given are the principles of parameterization of cumulus convection by an ensemble of identical clouds. A model of the ground hydrology, involving the liquid, ice and snow states of water, is included. A short summary is given of the scheme for computing solar and infrared radiation transfers through clear and cloudy air.

Arakawa, A.↗
NASA NTRS1972

Microbial response to space environment, part B

The performance of the microbial response to space environment experiment is considered excellent by all investigators. For most microbial systems, only preliminary survival data are available at this time. None of the available data indicate space flight-mediated changes in cell viability or recovery. One quite important observation has been made at this early date, however. The eggs produced after mice had been infected with N. dubius larvae demonstrated a significant decrease in hatchability when compared to identical ground controls. Except for the fact that the Apollo 16 flight larvae had been on board the command module, treatment of the flown larvae and ground control larvae was the same; neither had been exposed to UV irradiation. The significance and implications of this finding are currently being studied.

Taylor, G. R.↗
NASA NTRS1973

Competitive evaluation of failure detection algorithms for strapdown redundant inertial instruments

Algorithms for failure detection, isolation, and correction of redundant inertial instruments in the strapdown dodecahedron configuration are competitively evaluated in a digital computer simulation that subjects them to identical environments. Their performance is compared in terms of orientation and inertial velocity errors and in terms of missed and false alarms. The algorithms appear in the simulation program in modular form, so that they may be readily extracted for use elsewhere. The simulation program and its inputs and outputs are described. The algorithms, along with an eight algorithm that was not simulated, also compared analytically to show the relationships among them.

Wilcox, J. C.↗
NASA NTRS1973

Statistical mechanics of negative temperature states

The dynamics of two-dimensional interacting line vortices is identical to that of the two-dimensional electrostatic guiding center plasma. Both are Hamiltonian systems and are therefore susceptible to statistical mechanical treatments. The predictions of the microcanonical ensemble are explored for this system. Interest focuses primarily on the regime of total positive interaction energy, which should be above the Onsager negative temperature threshold. Calculations of the probability distribution for a component by means of the central limit theorem are carried out in the manner of Khinchin. The probability distribution of a component reduced to the usual Gibbs distribution in the regime of positive temperatures, and is still explicitly calculable for negative temperatures. The negative temperature states are neither quiescent nor spatially uniform. Expressions for the temperature are explicitly provided in terms of the total particle energy and particle number. A BBGKY hierarchy can be derived for both temperature regimes. Numerical simulations involving solutions of the equations of motion of 4008 particles are presented.

Montgomery, D. C.↗
NASA NTRS1971

Degradation and reuse of radiative thermal protection system materials for the space shuttle

Three silicide coated columbium alloys and two cobalt alloys were subjected to identical simulated reentry profiling exposures in both static (controlled vacuum leak) and dynamic (hypersonic plasma shear) environments. Primary emphasis in the columbium alloy evaluation was on the Cb752 and C129Y alloys with a lesser amount on FS85. Commercial silicide coatings of the R512E and VH109 formulations were used. The coated specimens were intentionally defected to provide the types of coating flaws that are expected in service. Temperatures were profiled up to peak temperatures of either 2350 F or 2500 F for 15 minutes in each cycle.

Bartlett, E. S.↗
NASA NTRS1972

Special report, cross calibration of JHU test equipment with GSFC vacuum optical bench

Tests were conducted to confirm the validity of the absolute calibrations which have been performed with the Apollo 17 ultraviolet spectrometer (UVS) in the calibration test equipment (CTE) which were constructed for that purpose. To accomplish this the prototype UV spectrometer SN/01 was retrofitted to be substantially identical to the qualification unit and to the two flight units. It was renamed the cross calibration unit (CCU). The instrument was first calibrated in the JHU calibration test equipment (CTE), then installed in the vacuum optical bench (VOB) at Goddard Space Flight Center and calibrated. The following day a second CTE calibration was conducted which provided substantially the same calibration values as were obtained on the first CTE calibration, and showed remarkably close agreement with the VOB calibration values at two of the wavelengths which were studied. The VOB results at the third wavelength (1216 A) indicate the CTE calibration at 1216 A is 15% too low. This apparent discrepancy is discussed and presents a very important result of the cross calibration effort.

Fastie, W. G.↗
NASA NTRS1973

Space nuclear system expansion joints

The engineering, design, and fabrication status of the expansion joint unit (EJU) to be employed in the NaK primary coolant piping loop of the 5-kwe Reactor thermoelectric system are described. Four EJU's are needed in the NaK primary coolant piping loop. The four EJU's which will be identical, utilize bellows as the flexing member, are hermetically sealed, and provide double containment. The bellows are of a nested-formed design, and are to be constructed of 1-ply thickness of 0.010-in. Inconel 718. The EJU's provide a minimum piping load margin of safety of +0.22.

Whitaker, W. D.↗
NASA NTRS1973

Digital simulation of the serpentuator using MARSYAS

Serpentuator is a serpentine teleoperator device for intravehicular and extravehicular activities in space. The serpentuator is simulated using simulation software system MARSYAS and using the Component-Connection Simulation model and the Direct Simulation model. A comparison of the results for the two cases shows that under identical conditions, simulation execution time in the Component-Connection model case is reduced by a factor of the order of 100. A visual display of the serpentuator positions is obtained using the AMTRAN system on the Datacraft DC 6024 computer.

Singh, S., P.↗
NASA NTRS1973

Facilitating the exploitation of ERTS-1 imagery utilizing snow enhancement techniques

The author has identified the following significant results. Snow cover in combination with low angle solar illumination has been found to provide increased tonal contrast of surface feature and is useful in the detection of bedrock fractures. Identical fracture systems were not as readily detectable in the fall due to the lack of a contrasting surface medium (snow) and a relatively high sun angle. Low angle solar illumination emphasizes topographic expressions not as apparent on imagery acquired with a higher sun angle. A strong correlation exists between the major fracture-lineament directions interpreted from multi-sensor imagery (including snow-free and snow cover ERTS) and the strike of bedrock joints recorded in the field indicating the structural origin of interpreted fracture-lineaments. A fracture-annotated ERTS-1 photo base map (1:250,000 scale) is being prepared for western Massachusetts. The map will document the utilization of ERTS-1 imagery for geological analysis in comparative snow-free and snow-covered terrain.

Wobber, F. J.↗
NASA NTRS1972

Equivalent gravity modes - An interim evaluation

The behavior of the main solar semidiurnal tidal mode in a dissipative atmosphere is studied both in a rotating spherical atmosphere and by means of the equivalent gravity mode approximation. Coefficients are chosen to crudely simulate the effects of molecular viscosity and conductivity. Major findings are: (1) Below 130 km, where friction is unimportant, equivalent gravity mode results are, for all practical purposes, identical to those at the equator obtained from a spherical calculation. (2) Above 130 km amplitudes over the equator obtained from the spherical calculation are about 30 percent smaller than those obtained from the equivalent gravity mode calculations. Also, there is a 15 deg (1/2 hour) difference in phase. (3) The amplitude reduction over the equator, is associated with a broadening of the latitude distribution of amplitude for the oscillatory pressure and temperature fields within the thermosphere. There is also significant variation of phase with latitude within the thermosphere. Associated with the above variations are significant changes in the latitude distribution of horizontal velocity within the thermosphere.

Lindzen, R. S.↗
NASA NTRS1973

Source encoding of images for efficient transmission

A set of recursive rules which generate unitary transforms with a fast algorithm are presented. For each rule, simple relations give the number of elementary operations required by the fast algorithm. The common Fourier, Walsh-Hadamard, Slant, and Haar transforms are expressed with these rules. The framework developed allows the introduction of generalized transforms which include all common transforms in a large class of identical computation transforms. A systematic and unified view is provided for unitary transforms which have appeared in the literature and for a number of new transforms of potential interest. Generalization to complex and multidimensional unitary transforms is considered.

Algazi, V. R.↗