Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generative diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

New Solids in As-O-Mo, As(P)-O-Mo(W) and As(P)-O-Nb(W) Systems That Exhibit Nonlinear Optical Properties

Interactions between well-mixed fine powders of As 2 O 3 , P 2 O 5 , MoO 3 , WO 3 and Nb 2 O 5 at different stoichiometry in quartz ampoules under vacuum at ~1000 °C in the presence of metallic molybdenum (or niobium), over several weeks, led to shiny dichroic crystalline materials being formed in cooler parts of the reaction vessel. An addition of small quantities of metals-Mo or Nb-was made with the aim of partially reducing their highly oxidized Mo(VI), W(VI) or Nb(V) species to corresponding Mo(V), W(V) and Nb(IV) centers, in order to form mixed valence solids. Sublimed crystals of four new compounds were investigated using a variety of techniques, with prime emphasis on the X-ray analysis, followed by spectroscopy (diffusion reflectance, IR, Raman and EPR), second harmonic generation (SHG), thermal analysis under N 2 and air atmosphere, and single crystals electrical conductivity studies. The results evidenced the formation of new complex solids of previously unknown compositions and structures. Three out of four compounds crystallized in non-centrosymmetric space groups and represent layered 2D polymeric puckered structures that being stacked on each other form 3D lattices. All new solids exhibit strong second-harmonic-generation (SHG effect; based on YAG 1064 nm tests with detection of 532 nm photons), and a rare photosalient effect when crystals physically move in the laser beam. Single crystals’ electrical conductivity of the four new synthesized compounds was measured, and the results showed their semiconductor behavior. Values of band gaps of these new solids were determined using diffusion reflectance spectroscopy in the visible region. Aspects of new solids’ practical usefulness are discussed.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2002

Dynamics of Diffusion Flames in von Karman Swirling Flows Studied

Von Karman swirling flow is generated by the viscous pumping action of a solid disk spinning in a quiescent fluid media. When this spinning disk is ignited in an oxidizing environment, a flat diffusion flame is established adjacent to the disk, embedded in the boundary layer (see the preceding illustration). For this geometry, the conservation equations reduce to a system of ordinary differential equations, enabling researchers to carry out detailed theoretical models to study the effects of varying strain on the dynamics of diffusion flames. Experimentally, the spinning disk burner provides an ideal configuration to precisely control the strain rates over a wide range. Our original motivation at the NASA Glenn Research Center to study these flames arose from a need to understand the flammability characteristics of solid fuels in microgravity where slow, subbuoyant flows can exist, producing very small strain rates. In a recent work (ref. 1), we showed that the flammability boundaries are wider and the minimum oxygen index (below which flames cannot be sustained) is lower for the von Karman flow configuration in comparison to a stagnation-point flow. Adding a small forced convection to the swirling flow pushes the flame into regions of higher strain and, thereby, decreases the range of flammable strain rates. Experiments using downward facing, polymethylmethacrylate (PMMA) disks spinning in air revealed that, close to the extinction boundaries, the flat diffusion flame breaks up into rotating spiral flames (refs. 2 and 3). Remarkably, the dynamics of these spiral flame edges exhibit a number of similarities to spirals observed in biological systems, such as the electric pulses in cardiac muscles and the aggregation of slime-mold amoeba. The tail of the spiral rotates rigidly while the tip executes a compound, meandering motion sometimes observed in Belousov-Zhabotinskii reactions.

Nayagam, Vedha↗
DOE OSTI2020

Analysis of multi-electron, multi-step homogeneous catalysis by rotating disc electrode voltammetry: theory, application, and obstacles

Rotating disc electrode (RDE) voltammetry has been widely adopted for the study of heterogenized molecular electrocatalysts for multi-step fuel-forming reactions but this tool has never been comprehensively applied to their homogeneous analogues. Here, the utility and limitations of RDE techniques for mechanistic and kinetic analysis of homogeneous molecular catalysts that mediate multi-electron, multi-substrate redox transformations are explored. Using the ECEC' reaction mechanism as a case study, two theoretical models are derived based on the Nernst diffusion layer model and the Hale transformation. Current–potential curves generated by these computational strategies are compared under a variety of limiting conditions to identify conditions under which the more minimalist Nernst Diffusion Layer approach can be applied. Based on this theoretical treatment, strategies for extracting kinetic information from the plateau current and the foot of the catalytic wave are derived. RDEV is applied to a cobaloxime hydrogen evolution reaction (HER) catalyst under non-aqueous conditions in order to experimentally validate this theoretical framework and explore the feasibility of RDE as a tool for studying homogeneous catalysts. Importantly, analysis of the foot-of-the-wave via this theoretical framework provides rate constants for elementary reaction steps that agree with those extracted from stationary voltammetric methods, supporting the application of RDE to study homogeneous fuel-forming catalysts. Lastly, obstacles encountered during the kinetic analysis of cobaloxime, along with the voltammetric signatures used to diagnose this reactivity, are discussed with the goal of guiding groups working to improve RDE set-ups and help researchers avoid misinterpretation of RDE data.

08 HYDROGEN↗
DOE OSTI2013

Generation of SFR few-group constants using the Monte Carlo code Serpent

In this study, the Serpent Monte Carlo code was used as a tool for preparation of homogenized few-group cross sections for the nodal diffusion analysis of Sodium cooled Fast Reactor (SFR) cores. Few-group constants for two reference SFR cores were generated by Serpent and then employed by nodal diffusion code DYN3D in 2D full core calculations. The DYN3D results were verified against the references full core Serpent Monte Carlo solutions. A good agreement between the reference Monte Carlo and nodal diffusion results was observed demonstrating the feasibility of using Serpent for generation of few-group constants for the deterministic SFR analysis. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS2011

Upstream Structures and Their Effects on the Magnetosphere

Kinetic processes within the Earth's foreshock generate a profusion of plasma and magnetic field structures with sizes and durations ranging from the microscale (e.g. SLAMs, solitons, and density holes) to the mesoscale (e.g. foreshock cavities or boundaries, hot flow anomalies, and bubbles). Swept into the bow shock by the solar wind flow, the perturbations associated with these features batter the magnetosphere, driving a wide variety of magnetospheric effects, including large amplitude magnetopause motion, bursty reconnection and the generation of flux transfer events, enhanced pulsation activity within the magnetosphere, diffusion and energization of radiation belt particles, enhanced particle precipitation resulting in dayside aurora and riometer absorption, and the generation of field-aligned currents and magnetic impulse events in high-latitude ground magnetometers. This talk reviews the ever growing menagery of structures observed upstream from the bow shock, examines their possible interrelationships, and considers their magnetospheric consequences.

Sibeck, D. G.↗
DOE OSTI2019

Efficiency enhancement in Si solar cell using 1D quasi-periodic antireflection coating

In order to enhance the efficiency of thin-film Si solar cell, two well-known Fibonacci and Thue–Morse sequences of 1D quasi-periodic structures have been considered to achieve a broadband (300–1100 nm) planar antireflection coating, in this article. As almost non-absorbing materials in the solar spectrum, TiO{sub 2} and SiO{sub 2} with optimized thicknesses are considered to eliminate the reflections in the front side of the solar cell. An optimized bilayer antireflection coating with thicknesses of 54.4 nm and 85.6 nm respectively for the TiO{sub 2} and SiO{sub 2} layers has been obtained. Considering material dispersion and solar power spectrum (AM1.5), maximum efficiency enhancements of 42.78%, 46.15%, and 50% have been achieved for the 3 µm thin-film Si solar cell using the FC(3,1) structure which correspond to the cells without any recombination, with bulk recombination, and with bulk and surface recombinations, respectively. The proposed quasi-periodic multilayer antireflection structures have been investigated and optimized using the TMM and FDTD methods. The electrical characteristic of the design is studied by the drift–diffusion method after extracting the electron–hole pair generation. Also, the stability of the performance of the proposed ARC against induced roughness in practice has been investigated and discussed.

14 SOLAR ENERGY↗
DOE OSTI2011

Tailoring Interface Structure in Highly Strained YSZ/STO Heterostructures

Heterostructures combining transition metal oxides, as compared to other materials, are able to accommodate very large amounts of epitaxial strain without breaking into islands or structural domains. Coherently strained interfaces are an interesting playground for the search of materials with enhanced ion diffusivities, of interest in devices for energy generation and storage. In this work we highlight the importance of the interface structure of highly strained YSZ/STO superlattices in determining an enhancement of their ionic conductivity. We show the role of growth orientation in controlling the structure and morphology of the interface. Results of density functional theory calculations are discussed, showing that the incompatibility of the oxygen positions at the interface planes plays a key role in stabilizing the high values of ionic conductivities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A Route to Design Novel Functional Peptides by Applying a Denoising Diffusional Model to mRNA Display Libraries

In vitro directed evolution techniques, such as mRNA display, enable peptide ligand discovery and optimization. However, physical libraries that rely on a genetic code can only search a small fraction of sequence space due to inherent biases in the genetic code and experimental limitations. To address this challenge, denoising diffusion implicit models (DDIMs) are applied to generate novel peptide ligands against B‐cell lymphoma extra‐large (Bcl‐x L ), a key cancer target. Starting with high‐throughput sequencing data from previous selections, a DDIM is trained to produce novel sequences with high affinity binding. Experimental validation confirms that most generated sequences are functionally equivalent to the original library members for Bcl‐x L binding and demonstrated comparable binding kinetics and affinity relative to the wildtype and nearest original neighbors. Importantly, this approach generated rare sequences not easily accessible via mutation and directed evolution. These results indicate that DDIMs can complement and expand directed evolution data, efficiently exploring underrepresented regions of sequence space. This approach provides a broadly applicable framework for accelerating ligand discovery and optimizing molecular properties across diverse targets.

Qi, Pearl [Mork Family Department of Chemical Engi↗
DOE OSTI2022

Effect of pinholes in Nb 4 C 3 MXene sheets on its electrochemical behavior in aqueous electrolytes

Two-dimensional (2D) niobium carbide, Nb 4 C 3 T x (T x : O, OH, and F), a representative member of the 43 MXene structural motif, has shown promising electrochemical performance in acidic electrolytes. The capacitive performance of Nb 4 C 3 T x in neutral aqueous electrolytes has been reported as moderate, but little effort has been made to improve it. In this paper, we report a method to introduce nanopores (pinholes) in Nb 4 C 3 T x MXene flakes by adjusting the etching time. The pinholes generated during the etching process improve ion diffusion pathways, which are otherwise hindered by the restacking of the 2D flakes. The “holey Nb 4 C 3 T x ” shows a 50 % improved rate capability at charge/discharge time scales of 1–2 s in 1 M Li 2 SO 4 , Na 2 SO 4 , and (NH 4 ) 2 SO 4 electrolytes. Our strategy of controlling the permeability of Nb 4 C 3 T x sheets can potentially be applied to other MXenes, providing guidance for improving the capacitance and rate capability of 2D materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Analysis of the EMCCD point-source response using x-rays

Electron Multiplying Charge Coupled Devices, EMCCD are used as x-ray detectors. The NSLS-II Soft Inelastic x-ray Scattering (SIX) beam line has two EMCCDs for x-ray detection in the spectrometer arm. The spectrometer with high resolving power disperses x-rays vertically. The x-ray vertical position on the sensor plane is related to its energy. This allows for very accurate x-ray energy measurements through x-ray coordinates. X-rays interact with silicon and create a number of electron-hole pairs proportional to the x-ray energy. Electrons drift and diffuse toward pixel gates and are collected there. The diffused electrons form a charge cloud distributed over several neighboring pixels. This charge sharing enables coordinate measurements with accuracy better than the pixel pitch. The charge distribution shape has to be taken into account to achieve ultimate accuracy in coordinate measurements. In this paper, we present a method of the charge distribution shape analysis and demonstrate its applications. The drift and diffusion of electrons ftom the point of generation to pixel gates results in the bell-shaped electron cloud usually approximated by Gaussian shape. The number of electrons collected under a pixel is proportional to the shape function integral. These electron packets get transferred to the sense node of the output amplifier. The transfer process could introduce distortions to the original charge distribution. For example, during transfers, electrons in the packet could be exposed to traps if they are present in the sensor. The trapping and later the release processes distort the apparent shape of the charge distribution. Therefore, deviations of the charge distribution shape ftom the originally symmetrical form can indicate the presence of trap centers in the sensor and can be used for sensor diagnostics.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

Engineering Two-Phase and Three-Phase Microstructures from Water-Based Dispersions of Nanoparticles for Eco-Friendly Polymer Solar Cell Applications

Nanoparticle organic photovoltaics, a subfield of organic photovoltaics (OPV), has attracted increasing interest in recent years due to the eco-friendly fabrication of solar modules afforded by colloidal ink technology. Importantly, using this approach it is now possible to engineer the microstructure of the light absorbing/charge generating layer of organic photovoltaics; decoupling film morphology from film deposition. In this study, single-component nanoparticles of poly(3-hexylthiophene) (P3HT) and phenyl-C 61 butyric acid methyl ester (PC 61 BM) were synthesized and used to generate a two-phase microstructure with control over domain size prior to film deposition. Scanning transmission X-ray microscopy (STXM) and electron microscopy were used to characterize the thin film morphology. Uniquely, the measured microstructure was a direct input for a nanoscopic kinetic Monte Carlo (KMC) model allowing us to assess exciton transport properties that are experimentally inaccessible in these single-component particles. Photoluminescence, UV-vis spectroscopy measurements, and KMC results of the nanoparticle thin films enabled the calculation of an experimental exciton dissociation efficiency (η ED ) of 37% for the two-phase microstructure. The glass transition temperature (T g ) of the materials was characterized with dynamic mechanical thermal analysis (DMTA) and thermal annealing led to an increase in ηED to 64% due to an increase in donor-acceptor interfaces in the thin film from both sintering of neighboring opposite-type particles in addition to the generation of a third mixed phase from diffusion of PC 61 BM into amorphous P3HT domains. Finally, this study demonstrates the higher level of control over donor-acceptor film morphology enabled by customizing nanoparticulate colloidal inks, where the optimal three-phase film morphology for an OPV photoactive layer can be designed and engineered.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Capturing Correlation Effects in Positron Binding to Atoms and Molecules

A major challenge in contemporary electronic structure theory involves the development of methods to describe in a balanced manner the contribution of correlation effects to energy differences. This challenge can be even greater for multicomponent systems containing more than one type of quantum particle. In the present work, we describe a flexible code for carrying out self-consistent field and configuration interaction (CI) calculations on multicomponent systems and use it to generate trial wave functions for use in diffusion Monte Carlo (DMC) calculations of the positron affinity of Be, Be 2 , Be 4 , Mg, CS 2 , and benzene. The resulting positron affinities (PAs) are in good agreement with the best values from the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Photo-Induced Vacancy Ordering and Phase Transition in MoTe 2

We demonstrate here that nonequilibrium dynamics plays a central role in the photo-induced 2H-to-1T’ phase transition of MoTe 2 . The phase transition is initiated by a local ordering of Te vacancies, followed by a 1T’ structural change in the original 2H lattice. The local 1T’ region serves as a seed to gather more vacancies into ordering and subsequently to induce a further growth of the 1T’ phase. Remarkably, this process is controlled by photo-generated excited carriers as they enhance vacancy diffusion, increase the speed of vacancy ordering, and are hence vital to the 1T’ phase transition. This mechanism can be contrasted to the current model requiring a collective sliding of a whole Te atomic layer, which is thermodynamically highly unlikely. By uncovering the key roles of photo excitations, our findings may have prime implications to fine control phase transitions in transition-metal dichalcogenides.

36 MATERIALS SCIENCE↗
DOE OSTI2018

A Subgrid Approach for Modeling Microtopography Effects on Overland Flow

Microtopography, or heterogeneities in the elevation across scales much smaller than the domain of interest, plays a critical role in surface water retention, surface/subsurface interactions, and runoff. Resolving microtopographic influences on flow requires high–resolution simulations, which are computationally demanding even when considering the surface system in isolation and even more so when surface flow is one component in integrated simulations that couple surface flow with unsaturated subsurface flow. There is thus significant motivation for models that allow the effects of subgrid microtopography to be better represented. Subgrid models modify coarsened models to capture the microtopography–induced nonlinear effects on hydrologic processes. We present a subgrid model that alters the water storage and flow terms in the diffusion wave equation for surface flow. Stochastically generated microtopography with strongly contrasting spatial structure, high–resolution digital elevation maps from a polygonal tundra site on the North Slope of Alaska and a hummocky microtopography from a field site in Northern Minnesota are used to assess the accuracy and applicability of the subgrid model to disparate landscapes. Approaches for determining subgrid model parameters are tested and simulation results using the subgrid model are compared to benchmark fine–scale simulations and to coarse simulations that ignore microtopography. Our findings confirm that a properly parameterized subgrid model greatly improves the coarse–scale representation of hydrographs and total water content in the system. Furthermore, using the polygonal tundra example, we propose and test a strategy for moving to application–relevant spatial scales by combining microtopography classification and a few fine–scale simulations on small subdomains.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Generation of parasitic axial flow by drift wave turbulence with broken symmetry: Theory and experiment

Detailed measurements of intrinsic axial flow generation parallel to the magnetic field in the controlled shear decorrelation experiment linear plasma device with no axial momentum input are presented and compared to theory. The results show a causal link from the density gradient to drift-wave turbulence with broken spectral symmetry and development of the axial mean parallel flow. As the density gradient steepens, the axial and azimuthal Reynolds stresses increase and radially sheared azimuthal and axial mean flows develop. A turbulent axial momentum balance analysis shows that the axial Reynolds stress drives the radially sheared axial mean flow. The turbulent drive (Reynolds power) for the azimuthal flow is an order of magnitude greater than that for axial flow, suggesting that the turbulence fluctuation levels are set by azimuthal flow shear regulation. The direct energy exchange between axial and azimuthal mean flows is shown to be insignificant. Therefore, the axial flow is parasitic to the turbulence-zonal flow system and is driven primarily by the axial turbulent stress generated by that system. The non-diffusive, residual part of the axial Reynolds stress is found to be proportional to the density gradient and is formed due to dynamical asymmetry in the drift-wave turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Nonlinear processes upon two-photon interband picosecond excitation of PbWO{sub 4} crystal

A new experimental method is proposed to study the dynamics of nonlinear processes occurring upon two-photon interband picosecond excitation of a lead tungstate crystal and upon its excitation by cw probe radiation in a temporal range from several nanoseconds to several seconds. The method is applied to the case of crystal excitation by a sequence of 25 high-power picosecond pulses with a wavelength of 523.5 nm and 633-nm cw probe radiation. Measuring the probe beam transmittance during crystal excitation, one can investigate the influence of two-photon interband absorption and the thermal nonlinearity of the refractive index on the dynamics of nonlinear processes in a wide range of times (from several nanoseconds to several seconds). The time resolution of the measuring system makes it possible to distinguish fast and slow nonlinear processes of electronic or thermal nature, including the generation of a thermal lens and thermal diffusion. An alternative method is proposed to study the dynamics of induced absorption transformation and, therefore, the dynamics of the development of nonlinear rocesses upon degenerate two-photon excitation of the crystal in the absence of external probe radiation. (nonlinear-optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2011

THE ARCADE 2 INSTRUMENT

The second generation Absolute Radiometer for Cosmology, Astrophysics, and Diffuse Emission (ARCADE 2) instrument is a balloon-borne experiment to measure the radiometric temperature of the cosmic microwave background and Galactic and extragalactic emission at six frequencies from 3 to 90 GHz. ARCADE 2 utilizes a double-nulled design where emission from the sky is compared to that from an external cryogenic full-aperture blackbody calibrator by cryogenic switching radiometers containing internal blackbody reference loads. In order to further minimize sources of systematic error, ARCADE 2 features a cold fully open aperture with all radiometrically active components maintained at near 2.7 K without windows or other warm objects, achieved through a novel thermal design. We discuss the design and performance of the ARCADE 2 instrument in its 2005 and 2006 flights.

79 ASTRONOMY AND ASTROPHYSICS↗