Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fluid dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Computational Fluid Dynamics Based Extraction of Heat Transfer Coefficient in Cryogenic Propellant Tanks

Current reduced-order thermal model for cryogenic propellant tanks is based on correlations built for flat plates collected in the 1950's. The use of these correlations suffers from: inaccurate geometry representation; inaccurate gravity orientation; ambiguous length scale; and lack of detailed validation. The work presented under this task uses the first-principles based Computational Fluid Dynamics (CFD) technique to compute heat transfer from tank wall to the cryogenic fluids, and extracts and correlates the equivalent heat transfer coefficient to support reduced-order thermal model. The CFD tool was first validated against available experimental data and commonly used correlations for natural convection along a vertically heated wall. Good agreements between the present prediction and experimental data have been found for flows in laminar as well turbulent regimes. The convective heat transfer between tank wall and cryogenic propellant, and that between tank wall and ullage gas were then simulated. The results showed that commonly used heat transfer correlations for either vertical or horizontal plate over predict heat transfer rate for the cryogenic tank, in some cases by as much as one order of magnitude. A characteristic length scale has been defined that can correlate all heat transfer coefficients for different fill levels into a single curve. This curve can be used for the reduced-order heat transfer model analysis.

Yang, H. Q.↗

Integrating aerodynamic surface modeling for computational fluid dynamics with computer aided structural analysis, design, and manufacturing

This presentation will discuss the development of a NASA Geometry Exchange Specification for transferring aerodynamic surface geometry between LeRC systems and grid generation software used for computational fluid dynamics research. The proposed specification is based on a subset of the Initial Graphics Exchange Specification (IGES). The presentation will include discussion of how the NASA-IGES standard will accommodate improved computer aided design inspection methods and reverse engineering techniques currently being developed. The presentation is in viewgraph format.

Thorp, Scott A.↗

Aerodynamic design optimization with sensitivity analysis and computational fluid dynamics

An investigation was conducted from October 1, 1990 to May 31, 1994 on the development of methodologies to improve the designs (more specifically, the shape) of aerodynamic surfaces of coupling optimization algorithms (OA) with Computational Fluid Dynamics (CFD) algorithms via sensitivity analyses (SA). The study produced several promising methodologies and their proof-of-concept cases, which have been reported in the open literature.

Baysal, Oktay↗

Supersonic Retro-Propulsion Experimental Design for Computational Fluid Dynamics Model Validation

The development of supersonic retro-propulsion, an enabling technology for heavy payload exploration missions to Mars, is the primary focus for the present paper. A new experimental model, intended to provide computational fluid dynamics model validation data, was recently designed for the Langley Research Center Unitary Plan Wind Tunnel Test Section 2. Pre-test computations were instrumental for sizing and refining the model, over the Mach number range of 2.4 to 4.6, such that tunnel blockage and internal flow separation issues would be minimized. A 5-in diameter 70-deg sphere-cone forebody, which accommodates up to four 4:1 area ratio nozzles, followed by a 10-in long cylindrical aftbody was developed for this study based on the computational results. The model was designed to allow for a large number of surface pressure measurements on the forebody and aftbody. Supplemental data included high-speed Schlieren video and internal pressures and temperatures. The run matrix was developed to allow for the quantification of various sources of experimental uncertainty, such as random errors due to run-to-run variations and bias errors due to flow field or model misalignments. Some preliminary results and observations from the test are presented, although detailed analyses of the data and uncertainties are still on going.

Berry, Scott A.↗

Device-scale computational fluid dynamics modeling of carbon dioxide absorption using encapsulated sorbents

Micro-encapsulated carbon dioxide sorbent (MECS) is considered to be a promising material for carbon capture system because of high capture rate, low fabrication cost, and efficient energy consumption. To accelerate the development of MECS technology for industrial deployment, device-scale computational fluid dynamics (CFD) simulations are performed to study hydrodynamics and CO2 absorption behavior in a conceptual fluidized bed reactor. The two-fluid model solver, built in the Multiphase Flow with Interphase eXchanges (MFIX), is adopted to solve the multiphase flow hydrodynamics by representing both fluid and solids as continuous phases. Filtered models are implemented to capture the sub-grid effects that normally cannot be directly considered because MECS particles are too small to be explicitly resolved at such a large scale. Using established CFD tools, this study aims to characterize MECS behavior and predict its carbon capture performance in a conceptual device-scale absorber. The MECS particle size and gas flow rate have significant impact on CO2 capture efficiency. The CO2 capture efficiency decreases with increasing gas flow rate. Smaller particle size lead to better gas-solid homogeneity, as a results CO2 absorption efficiency increases.

Wang, Chao (ORCID:0000000279406614)↗

Analysis of Hydrocyclone Geometry via Rapid Optimization Based on Computational Fluid Dynamics

Abstract Hydrocyclones exploit density gradients for the centrifugal separation of dispersions in a continuous liquid. Selection of the geometrics for optimal separation is case specific, like the media characteristics. The existing optimization method based on computational fluid dynamics (CFD) provides a powerful analytical tool but requires long computational times. The most common praxis for CFD optimization is via the single‐factor optimization method (SFOM). In this study, a novel approach is presented as an improved rapid optimization method that implements a dynamic‐mesh and user‐defined function optimization method (DUOM). The DUOM adapts the dynamic‐mesh approach from other applications to the optimization analysis of hydrocyclones. The DUOM reduced the computational time by 31.1 %, compared to the SFOM.

Liu, Lin↗

Efficient GPU Implementation of Automatic Differentiation for Computational Fluid Dynamics

Many scientific and engineering applications require repeated calculations of derivatives of output functions with respect to input parameters. Automatic Differentiation (AD) is a method that automates derivative calculations and can significantly speed up code development. In Computational Fluid Dynamics (CFD), derivatives of flux functions with respect to state variables (Jacobian) are needed for efficient solutions of the nonlinear governing equations. AD of flux functions on graphics processing units (GPUs) is challenging as flux computations involve many intermediate variables that create high register pressure and require significant memory traffic because of the need to store the derivatives. This paper presents a forward-mode AD method based on multivariate dual numbers that addresses these challenges and simultaneously reduces the floating-point operation count. The dimension of the multivariate dual numbers is optimized for performance. The flux computations are restructured to minimize the number of temporary variables and reduce register pressure. For effective utilization of memory bandwidth, shared memory is used to store the local flux Jacobian. This AD implementation is compared with several other Jacobian implementations on an NVIDIA V100 GPU (V100). For three-dimensional perfect-gas compressible-flow equations implemented in a practical CFD code, the AD implementation of a flux Jacobian based on multivariate dual numbers of dimension 5 outperforms all other GPU AD implementations on V100. Its performance is comparable with the optimized hand-differentiated version. Finally, the implementation achieves 75% of the peak floating-point throughput and 61 % of the peak global device memory bandwidth usage.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Computational Fluid Dynamics Analysis Success Stories of X-Plane Design to Flight Test

Examples of the design and flight test of three true X-planes are described, particularly X-plane design techniques that relied heavily on computational fluid dynamics(CFD) analysis. Three examples are presented: the X-36 Tailless Fighter Agility Research Aircraft, the X-45A Unmanned Combat Air Vehicle, and the X-48B Blended Wing Body Demonstrator Aircraft. An overview is presented of the uses of CFD analysis, comparison and contrast with wind tunnel testing, and information derived from CFD analysis that directly related to successful flight test. Lessons learned on the proper and improper application of CFD analysis are presented. Highlights of the flight-test results of the three example X-planes are presented. This report discusses developing an aircraft shape from early concept and three-dimensional modeling through CFD analysis, wind tunnel testing, further refined CFD analysis, and, finally, flight. An overview of the areas in which CFD analysis does and does not perform well during this process is presented. How wind tunnel testing complements, calibrates, and verifies CFD analysis is discussed. Lessons learned revealing circumstances under which CFD analysis results can be misleading are given. Strengths and weaknesses of the various flow solvers, including panel methods, Euler, and Navier-Stokes techniques, are discussed.

Cosentino, Gary B.↗

Computational fluid dynamic modeling of fluidized-bed polymerization reactors

Polyethylene is one of the most widely used plastics, and over 60 million tons are produced worldwide every year. Polyethylene is obtained by the catalytic polymerization of ethylene in gas and liquid phase reactors. The gas phase processes are more advantageous, and use fluidized-bed reactors for production of polyethylene. Since they operate so close to the melting point of the polymer, agglomeration is an operational concern in all slurry and gas polymerization processes. Electrostatics and hot spot formation are the main factors that contribute to agglomeration in gas-phase processes. Electrostatic charges in gas phase polymerization fluidized bed reactors are known to influence the bed hydrodynamics, particle elutriation, bubble size, bubble shape etc. Accumulation of electrostatic charges in the fluidized-bed can lead to operational issues. In this work a first-principles electrostatic model is developed and coupled with a multi-fluid computational fluid dynamic (CFD) model to understand the effect of electrostatics on the dynamics of a fluidized-bed. The multi-fluid CFD model for gas-particle flow is based on the kinetic theory of granular flows closures. The electrostatic model is developed based on a fixed, size-dependent charge for each type of particle (catalyst, polymer, polymer fines) phase. The combined CFD model is first verified using simple test cases, validated with experiments and applied to a pilot-scale polymerization fluidized-bed reactor. The CFD model reproduced qualitative trends in particle segregation and entrainment due to electrostatic charges observed in experiments. For the scale up of fluidized bed reactor, filtered models are developed and implemented on pilot scale reactor.

42 ENGINEERING↗

Computational Fluid Dynamics In Rotary-Wing Aerodynamics

Emerging techniques appear vital to progress in rotary-wing-airplane industry. Report reviews current trends in field of helicopter-rotor aerodynamics. Selected test cases used to demonstrate current research in computational fluid dynamics (CFD) vital to analysis and design of advanced rotor-craft.

Davis, Sanford S.↗

Compact acoustic levitation device for studies in fluid dynamics and material science in the laboratory and microgravity

An ultrasonic levitation device operable in both ordinary ground-based as well as in potential space-borne laboratories is described together with its various applications in the fields of fluid dynamics, material science, and light scattering. Some of the phenomena which can be studied by this instrument include surface waves on freely suspended liquids, the variations of the surface tension with temperature and contamination, the deep undercooling of materials with the temperature variations of their density and viscosity, and finally some of the optical diffraction properties of transparent substances.

Trinh, E. H.↗

Physics-Based Modeling and Simulation of Self-Reacting Friction Stir Welding Using Computational Fluid Dynamics

A physics-based model was developed to simulate the behavior of material in a self-reacting friction stir welding (SR-FSW) process for the joining of metals. This steady-state model builds upon fundamental computational fluid dynamic (CFD) principles within Ansys Fluent to solve the discretized equations. The effective viscosity is calculated using a viscoplastic model using a Sheppard-Wright formulation of flow stress. Numerous advancements have been made in the incorporated physics including (1) temperature-dependent material properties; (2) locally adaptable flow and thermal boundary conditions; and (3) adapting material properties in nugget in response to microstructural changes. Simulation strategies to accelerate computation and improve numerical stability include adapting the mesh refinement and solver relaxation factors during simulation. The result is a highly robust and computationally efficient model capable of providing the material flow and temperature history across the domain. As material history determines the local microstructure and ultimately weld strength, an accurate and detailed physics-based model has the potential to accelerate SR-FSW process development. The model is highly adaptable to changes in process parameters, tool design, or alloy.

Process Modeling↗

Concurrent extensions to the FORTRAN language for parallel programming of computational fluid dynamics algorithms

Experiments were conducted at NASA Ames Research Center to define multi-tasking software requirements for multiple-instruction, multiple-data stream (MIMD) computer architectures. The focus was on specifying solutions for algorithms in the field of computational fluid dynamics (CFD). The program objectives were to allow researchers to produce usable parallel application software as soon as possible after acquiring MIMD computer equipment, to provide researchers with an easy-to-learn and easy-to-use parallel software language which could be implemented on several different MIMD machines, and to enable researchers to list preferred design specifications for future MIMD computer architectures. Analysis of CFD algorithms indicated that extensions of an existing programming language, adaptable to new computer architectures, provided the best solution to meeting program objectives. The CoFORTRAN Language was written in response to these objectives and to provide researchers a means to experiment with parallel software solutions to CFD algorithms on machines with parallel architectures.

Weeks, Cindy Lou↗

Computational fluid dynamics simulations of a binary particle bed in a riser-based carbon stripper for chemical looping combustion

Chemical-looping combustion (CLC) is a next generation combustion technology that shows great promise as a solution for the need of high-efficiency low-cost carbon capture from fossil fueled power plants. In this paper, numerical simulations are conducted of a binary particle bed associated with a coal-direct CLC system consisting of coal (represented by plastic beads) and oxygen carrier particles and validated against an experimental riser-based carbon stripper. The detailed particle dynamics and solid-gas and solid-solid interactions are investigated using the Lagrangian particle-tracking approach known as the discrete element method coupled with the computational fluid dynamics solution for the flow field. The simulation results of the fluidization behavior and the separation ratio of the particles are in excellent agreement with the experiment. In conclusion, a credible simulation of a binary particle bed is of particular importance for understanding the details of the fluidization behavior; the baseline simulation established in this work can be used as a tool for designing and optimizing the performance of such systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fluid dynamics and kinematics of molten metals in the low-gravity environment of Skylab

The response of molten metals to mechanical and thermal driving forces in nominal and microgravity is analyzed both theoretically and experimentally. The magnitude and transient behavior of internal fluid circulations, surface deformations, and globule trajectories and their effects on solidification in the Skylab electron beam sphere forming and metals melting experiments are determined. The theoretical approach consists of dimensional analysis of the governing differential equations. Experimental aspects include evaluation of specimens from terrestrial, KC-135 research aircraft, and actual Skylab tests and analysis of high speed movies taken during the melting processes. Several gravity variations and gravity independent results were successfully predicted based on expected differences and similarities in fluid dynamics.

Bourgeois, S. V.↗

Computational Fluid Dynamics Analysis of the Stall Characteristics of a Wing Design Based on Prandtl's Minimum Induced Drag

Stall characteristics of a wing whose design was based on Prandtl’s minimum induced drag analysis is presented. Flow field is resolved using RANS CFD (Computational Fluid Dynamics) solver OVERFLOW-2. Both in freestream and in ground effect are analyzed. In addition, effect of low-Mach preconditioner on the stall characteristic is presented. Results show that simulations that lack preconditioner predicts higher stall angle as well as much more benign behavior near the stall angle. Stall analysis in freestream show that flow begins to separate at the inboard region. The flow at the tip remains attached until approximately 19.0 degrees angle of attack.

PRANDTL↗

Computational Fluid Dynamics Analysis of 3D Hot Metal Flow Characteristics in a Blast Furnace Hearth

The campaign life of an iron blast furnace depends on hearth wear. Distributions of liquid iron flow and refractory temperatures have a significant influence on hearth wear. A 3D comprehensive computational fluid dynamics model has been developed specifically for simulating the blast furnace hearth. Furthermore, it includes both the hot metal flow and the conjugate heat transfer through the refractories. Our model extensively validated using measurement data from Mittal Steel old, new IH7 blast furnace and U.S. Steel 13 blast furnace. Good agreements between measured and calculated refractory temperature profiles have been achieved. It has been used to analyze the velocity and temperature distributions and wear patterns of different furnaces and operating conditions. Our results can be used to predict the inner profile of hearth and to provide guidance for protecting the hearth.

42 ENGINEERING↗

Inlet-Compressor Analysis Performed Using Coupled Computational Fluid Dynamics Codes

A thorough understanding of dynamic interactions between inlets and compressors is extremely important to the design and development of propulsion control systems, particularly for supersonic aircraft such as the High-Speed Civil Transport (HSCT). Computational fluid dynamics (CFD) codes are routinely used to analyze individual propulsion components. By coupling the appropriate CFD component codes, it is possible to investigate inlet-compressor interactions. The objectives of this work were to gain a better understanding of inlet-compressor interaction physics, formulate a more realistic compressor-face boundary condition for time-accurate CFD simulations of inlets, and to take a first step toward the CFD simulation of an entire engine by coupling multidimensional component codes. This work was conducted at the NASA Lewis Research Center by a team of civil servants and support service contractors as part of the High Performance Computing and Communications Program (HPCCP).

Cole, Gary L.↗