Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “example”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Why do we need detailed gravity over continents: Some Australian examples

Geophysical quantities available over a continent are gravity and components of the magnetic field. Direct inferences on crustal structure are difficult to make and strongly dependent on mechanical assumptions the isostatic state. The data for Australia represents one of the best continental scale gravity surveys. The gravity anomalies are generally bland over the continent which confirms that stress relaxation and erosion and rebound were instrumental in reducing nonhydrostatic stresses. In central Australia very large gravity anomalies occur and the region is out of isostatic equilibrium despite the fact that tectonic activity ceased 300 ma ago. The isostatic response functions points to a substantial horizontal compression in the crust. Similar conclusions are drawn for the large anomalies in western Australia. The tectonic implications of these anomalies are examined. In eastern Australia the gravity anomalies are explained in terms of a model of erosion of the highlands and concomitant regional isostatic rebound.

Lambeck, K.↗
NASA NTRS1986

Some examples of deep structure of the Archean from geophysics

The development of Archean crust remains as one of the significant problems in earth science, and a major unknown concerning Archean terrains is the nature of the deep crust. The character of crust beneath granulite terrains is especially fascinating because granulites are generally interpreted to represent a deep crustal section. Magnetic data from this area can be best modeled with a magnetized wedge of older Archean rocks (granulitic gneisses) underlying the younger Archean greenstone terrain. The dip of the boundary based on magnetic modeling is the same as the dip of the postulated thrust-fault reflection. Thus several lines of evidence indicate that the younger Archean greenstone belt terrain is thrust above the ancient Minnesota Valley gneiss terrain, presumably as the greenstone belt was accreted to the gneiss terrain, so that the dipping reflection represents a suture zone. Seismic data from underneath the granulite-facies Minnesota gneiss terrain shows abundant reflections between 3 and 6 s, or about 9 to 20 km. These are arcuate or dipping multicyclic events indicative of layering.

Smithson, S. B.↗
NASA NTRS1986

Concerning the electrosynthesis of hydrogen peroxide and peroxodisulfates. Section 2: Optimization of electrolysis cells using an electrolyzer for peroxodisulfuric acid as an example

The model is presented of an electrolyzer for peroxodisulfuric acid, and it is analyzed mathematically. Its application for engineering and economic optimization is investigated in detail. The mathematical analysis leads to conclusions concerning the change in position of the optimum with respect to the various target functions due to changes of the individual design-caused and economic parameters.

Schleiff, M.↗
NASA NTRS1985

Magnetization of lower crust and interpretation of regional magnetic anomalies - Example from Lofoten and Vesteralen, Norway

During the last 20 years, studies have been conducted regarding the regional, or long-wavelength, geomagnetic anomalies of the lower crust of the earth. The present paper is mainly concerned with the petrologic and geophysical interpretation of the observed features. Attention is given to magnetic mineralogy and magnetic properties of high-grade rocks from Lofoten and Vesteralen, regional geology and geophysics, field measurements and sampling, magnetic mineralogy of the lower crust, the effects of metamorphism upon magnetic mineralogy and magnetic properties of high-grade rocks, susceptibility-temperature relations and the Hopkinson effect, and petrologic sources of regional crustal magnetic anomalies.

Schlinger, C. M.↗
NASA NTRS1985

The nature of crater rays - The Copernicus example

It is pointed out that crater rays are filamentous, generally high-albedo features which emanate nearly radially from young impact structures. An investigation has been conducted of the physical and chemical properties of a single lunar ray system for Copernicus crater with the objective to achieve a better understanding of the nature of crater rays, taking into account questions regarding the local or foreign origin of ray material. A combination of data is considered, giving attention to spectral reflectance (for composition), radar (for physical properties), and images (for photogeologic context). The crater Copernicus was selected because of its well-developed ray system, the crater's relative youth, and the compositional contrast between the target material of Copernicus crater and the material on which many rays were emplaced.

Pieters, C. M.↗
NASA NTRS1986

Remote detection of soil geochemical anomalies from an aircraft platform - Examples from the Virginia Piedmont

The use of remote-sensing data on forest leaf flush to identify areas with anomalously high soil heavy-metal concentrations is demonstrated using airborne Thematic Mapper Simulator (TMS) leaf-area-index data obtained over two sites in Virginia in spring 1983 and 1984. Mean-reflectance differences, especially in the 760-900-nm and 630-690-nm bands, corresponding to delayed leaf flush are found to be good indicators of higher heavy-metal concentration. Airborne and ground-based canopy-temperature measurements are also shown to be significantly higher in high-heavy-metal areas than in control areas.

Bell, R.↗
NASA NTRS1986

Examples of mesoscale structures and short-term wind variations detected by VHF Doppler radar

The first of three wind profilers planned for operation in central and western Pennsylvania began full-time, high-quality operation during July 1985. It is located about 20 km south-southeast of University Park and operates at 50 MHz. Another 50-MHz radar and a 400-MHz radar are to be installed over the next few months, to complete a mesoscale triangle with sides of 120 to 160 km. During the period since early July, a number of weather systems have passed over the wind profiler. Those accompanied by thunderstorms caused data losses either because the Department computer system lost power or because power went out at the profiler site. A backup power supply and an automatic re-start program will be added to the profiler system to minimize such future losses. Data have normally been averaged over a one-hour period, although there have been some investigations of shorter-period averaging. In each case, preliminary examinations reveal that the profiler winds are indicative of meteorological phenomena. The only occasions of bad or missing data are obtained when airplane noise is occasionally experienced and when the returned power is nearly at the noise level, at the upper few gates, where a consensus wind cannot be determined. Jets streams, clouds, and diurnal variations of winds are discussed.

Forbes, G. S.↗
NASA NTRS1986

An example of scaling MST Doppler spectra using median spectra, spectral smoothing, and velocity tracing

Although automatic, computer scaling methods appeared at the start of the MST (mesosphere stratosphere troposphere) radar technique, there is a continuing need for scaling algorithms that perform editing functions and increase the sensitivity of radar by post processing. The scaling method presented is an adaptation of the method of scaling MST Doppler spectra presented by Rastogi (1984). A brief overview of this method is as follows: a median spectrum is calculated from several sequential spectra; the median noise value is subtracted from this derived spectrum; the median spectrum is smoothed; the detection/nondetection decision is made by comparing the smoothed spectrum to the variance of the smoothed noise; and if a signal is detected, then the half-power points of the smoothed echo spectrum are used to place limits on the evaluation of the first two moments of the unsmoothed median spectrum. In all of the above steps, the algorithm is guided by tracing the expected velocity range upward from the lowest range as far as possible. The method is discussed in more detail.

Green, J. L.↗
NASA NTRS1986

Use of digital Munsell color space to assist interretation of imaging spectrometer data: Geologic examples from the northern Grapevine Mountains, California and Nevada

Techniques using Munsell color transformations were developed for reducing 128 channels (or less) of Airborne Imaging Spectrometer (AIS) data to a single color-composite-image suitable for both visual interpretation and digital analysis. Using AIS data acquired in 1984 and 1985, limestone and dolomite roof pendants and sericite-illite and other clay minerals related to alteration were mapped in a quartz monzonite stock in the northern Grapevine Mountains of California and Nevada. Field studies and laboratory spectral measurements verify the mineralogical distributions mapped from the AIS data.

Kruse, F. A.↗
NASA NTRS1987

The 2.5-diacyl-1,4-dimethylbenzenes: Examples of bisphotoenol equivalents

The photochemistry of 2,5-dibenzoyl(DBX)-and 2,5-diacetyl-1,4-dimethylbenzene (DAX) has been investigated. Both compounds readily undergo photoenolization similar to 0-alkylphenyl ketones. However, unlike 0-alkylphenyl ketones DAX and DBX are each capable of undergoing two tandem photoenolizations. Photoenols derived from o-alkylphenyl ketones have been successfully trapped with Diels-Alder dienophiles to provide a convenient synthesis of substituted tetralins. Similarly, Diels-Alder trapping of DBX photoenils afforded substituted tetra- and octahydro anthracenes. Further mainpulation of these photadducts provided the corresponding anthracenes in good yield. The photochemistry of DAX and DBX will be discussed, in particular their use in the synthesis of substituted anthracenes.

Meador, Michael A.↗
NASA NTRS1987

Example on how to model and simulate turbulence for flight simulators

Analytical developments relative to gust response are discussed. Turbulence length scale, spectral functions, zero crossing values, gust loads analysis, power spectral techniques for analyzing the response of aircraft in turbulence, the spectrum of the rolling moment coefficient, and the spectrum correction factor are among the issues considered.

Houbolt, John C.↗
NASA NTRS1987

Component mode synthesis and large deflection vibration of complex structures. Volume 1: Examples of NASTRAN modal synthesis capability

The use of NASTRAN model synthesis capability is illustrated. A classical truss problem is examined and the results are compared to results from other methods to test for accuracy. The problem is examined using both fixed interface modes and free interface modes. The solution is carried out for an applied dynamic load as far as recovery of forces in individual members as a function of time. Another small beam problem is used to compare different means of combining substructures.

Mei, Chuh↗
NASA NTRS1987

Einstein observations of EF Eridani (2A 0311-227) - The textbook example of AM Herculis-type systems

Hard and soft X-ray spectra of the AM Herculis star EF Eridani obtained with the Einstein Observatory are found to be fitted by a thermal bremsstrahlung spectrum with kT of about 20 keV, and a blackbody spectrum with kT of between 16 and about 33 eV, respectively. EF Eri is shown to behave almost exactly as predicted by simple theory, with its soft X-ray luminosity not exceeding the hard X-ray luminosity by more than a factor of three, and both spectra originating from the same active pole of the accreting white dwarf. The data are consistent with a model involving an accretion stream penetrating deep into the magnetosphere of the white dwarf, such that accretion occurs along nonpolar field lines, and an 'X-ray auroral oval' emission is formed on the surface of the white dwarf.

Beuermann, K.↗
NASA NTRS1987

Software-implemented fault insertion: An FTMP example

This report presents a model for fault insertion through software; describes its implementation on a fault-tolerant computer, FTMP; presents a summary of fault detection, identification, and reconfiguration data collected with software-implemented fault insertion; and compares the results to hardware fault insertion data. Experimental results show detection time to be a function of time of insertion and system workload. For the fault detection time, there is no correlation between software-inserted faults and hardware-inserted faults; this is because hardware-inserted faults must manifest as errors before detection, whereas software-inserted faults immediately exercise the error detection mechanisms. In summary, the software-implemented fault insertion is able to be used as an evaluation technique for the fault-handling capabilities of a system in fault detection, identification and recovery. Although the software-inserted faults do not map directly to hardware-inserted faults, experiments show software-implemented fault insertion is capable of emulating hardware fault insertion, with greater ease and automation.

Czeck, Edward W.↗
NASA NTRS1988

Examples of Nonconservatism in the CARE 3 Program

This paper presents parameter regions in the CARE 3 (Computer-Aided Reliability Estimation version 3) computer program where the program overestimates the reliability of a modeled system without warning the user. Five simple models of fault-tolerant computer systems are analyzed; and, the parameter regions where reliability is overestimated are given. The source of the error in the reliability estimates for models which incorporate transient fault occurrences was not readily apparent. However, the source of much of the error for models with permanent and intermittent faults can be attributed to the choice of values for the run-time parameters of the program.

Dotson, Kelly J.↗
NASA NTRS1988

Construction of mass-age curves for the continental crust: An empirical model and an example from the western US

The methodology of determining crustal mass-age curves is discussed. Problems in doing this include determination of model ages and accounting for mixing of materials of different ages during crust forming processes. These difficulties can be overcome with some reasonable assumptions and estimates of rock volumes based on areal proportions. This technique was used to construct a reasonably well constrained mass-age curve for the southwestern U.S. based on isotopic measurements on over 100 samples. The results imply that the crust in this area grew episodically at 2.8, 1.8, and 0.1 Ga. It is estimated that it would take on the order of 10000 to 100000 individual Sm-Nd isotopic measurements to carry out a similar exercise for continental crust world wide.

Depaolo, D. J.↗
NASA NTRS1988

Geochronological and lead-isotope evidences for rapid crust formation in middle-proterozoic time: The Labrador example

Extensive U-Pb geochronological studies in the Grenville and Makkovik provinces have shown that eastern Labrador is underlain by two distinct crustal blocks. In order to substantiate the juvenile character of the middle-Proterozoic crustal block, the isotopic compositon of lead in leached k-feldspars from the same rocks were analyzed. The results of the analysis are briefly discussed.

Schaerer, Urs↗