Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “energy solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Salt-Dependent DNA-DNA Spacings in Intact Bacteriophage lambda Reflect Relative Importance of DNA Self-Repulsion and Bending Energies

Using solution synchrotron x-ray scattering, we measure the variation of DNA-DNA d spacings in bacteriophage {lambda} with mono-, di-, and polyvalent salt concentrations, for wild-type [48.5 x 10{sup 3} base pairs (bp)] and short-genome-mutant (37.8 kbp) strains. From the decrease in d spacings with increasing salt, we deduce the relative contributions of DNA self-repulsion and bending to the energetics of packaged phage genomes. We quantify the DNA-DNA interaction energies within the intact phage by combining the measured d spacings in the capsid with measurements of osmotic pressure in DNA assemblies under the same salt conditions in bulk solution. In the commonly used Tris-Mg buffer, the DNA-DNA interaction energies inside the phage capsids are shown to be about 1 kT/bp, an order of magnitude larger than the bending energies.

59 BASIC BIOLOGICAL SCIENCES↗

Analysis of Power Electronic Solutions for Wide-Range Wave Energy Input

Wave energy is a largely untapped energy source with the potential to provide 290 TWh per year to the continental United States. As a new technology, wave energy converters are less efficient and reliable compared to established energy sources, leaving the vast energy of the sea largely unutilized. Wave energy is uniquely inconsistent, with large fluctuations. Paired with harsh operating environments and difficulty in repair, the power electronics designed to harvest wave energy need to be reliable, cost-effective, and able to work in a wide operating band. The literature on existing power electronics in wave energy converters and lessons learned across other industries provide a framework of topologies to simulate. WEC-Sim, an open-source hydrodynamic platform in MATLAB Simulink developed by the National Laboratory of the Rockies, was used to simulate a wide range of power electronics under a variety of wave conditions. This paper provides a comprehensive investigation into existing wave energy power electronics converters, state-of-the-art topologies that can be applied to wave energy, and novel solutions to wave conversion.

16 TIDAL AND WAVE POWER↗

A Star on Earth

At the Energy Department's Princeton Plasma Physics Lab, scientists are trying to accomplish what was once considered the realm of science fiction: create a star on Earth. The National Spherical Torus Experiment (NSTX) is a magnetic fusion device that is used to study the physics principles of spherically shaped plasmas -- hot ionized gases in which, under the right conditions, nuclear fusion will occur. Fusion is the energy source of the sun and all of the stars. Not just limited to theoretical work, the NSTX is enabling cutting-edge research to develop fusion as a future energy source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Introduction to the GeoVision Analysis

This fact sheet briefly summarizes the report, GeoVision: Harnessing the Heat Beneath Our Feet. Geothermal Energy has Wealth of Unrealized Potential in United States, with Opportunity to Increase Geothermal Electricity Generation 26-fold by 2050.

15 GEOTHERMAL ENERGY↗

A Sensitivity-driven Wide Area Protection (SWAP) Coordination Tool for High Penetration of Inverter-based Resources (IBR)

Traditionally, power system generation sources have been composed of synchronous generators, of which the fault current behavior is understood with minimal differences between generation size and types due to the physics of their construction. Present protection schemes and modeling methods are based upon these understood characteristics. Most renewable generation is composed of inverter-based resources (IBR), in which fault current is determined by switching control software and hardware limitations, each of which can vary between manufacturers and even between models of the same manufacturer. The resulting fault current is low in magnitude, low in negative-sequence current, unpredictable phase angles, and is a challenge to model. These characteristics also result in a challenge to traditional protection schemes and fault simulation software. To address several of these concerns, the project has the following goals: 1. Improve IBR models: Improve IBR models used in short circuit (SC) programs to accurately capture the response of IBRs at the bulk power system (BPS) level for fault and protection studies. 2. Develop automation tool: Develop an automation tool that allows engineers to identify protection coordination and sensitivity issues by performing SC and protection coordination studies in a high IBR-penetrated grid by applying variations to the IBR models, faults, contingencies, etc. 3. Develop schemes: Develop new protection mitigation solution schemes that complement the existing protection systems to ensure safe operation of the BPS with higher IBR penetration levels. The project team did not achieve this final goal, as the Department of Energy (DOE) stopped the project early due to changes in DOE funding priorities. The termination notice came at the beginning of the final project phase, while the team was identifying and beginning to investigate protection issues. It should be noted that the team discussed a 100% penetration scenario. However, this scenario would require the use of grid-forming IBR models that are not presently available. Since developing these models requires additional effort, the 100% penetration scenario was not pursued during this project. In the future, developing the methodology and models for the 100% scenario could benefit the industry.

14 SOLAR ENERGY↗

Machine and Application Aware Partitioning for Adaptive Mesh Refinement Applications. In: HPDC '17 Proceedings of the 26th International Symposium on High-Performance Parallel and Distributed Computing

Load balancing and partitioning are critical when it comes to parallel computations. Popular partitioning strategies based on space filling curves focus on equally dividing work. The partitions produced are independent of the architecture or the application. Given the ever-increasing relative cost of data movement and increasing heterogeneity of our architectures, it is no longer sufficient to only consider an equal partitioning of work. Minimizing communication costs are equally if not more important. Our hypothesis is that an unequal partitioning that minimizes communication costs significantly can scale and perform better than conventional equal-work partitioning schemes. This tradeoff is dependent on the architecture as well as the application. We validate our hypothesis in the context of a finite-element computation utilizing adaptive mesh-refinement. Our central contribution is a new partitioning scheme that minimizes the overall runtime of subsequent computations by performing architecture and application-aware non-uniform work assignment in order to decrease time to solution, primarily by minimizing data-movement. We evaluate our algorithm by comparing it against standard space-filling curve based partitioning algorithms and observing time-to-solution as well as energy-to-solution for solving Finite Element computations on adaptively refined meshes. We demonstrate excellent scalability of our new partition algorithm up to $262,144$ cores on ORNL's Titan and demonstrate that the proposed partitioning scheme reduces overall energy as well as time-to-solution for application codes by up to 22.0%.

Fernando, Milinda↗

Phase-space analysis of teleparallel dark energy

We perform a detailed dynamical analysis of the teleparallel dark energy scenario, which is based on the teleparallel equivalent of General Relativity, in which one adds a canonical scalar field, allowing also for a nonminimal coupling with gravity. We find that the universe can result in the quintessence-like, dark-energy-dominated solution, or to the stiff dark-energy late-time attractor, similarly to standard quintessence. However, teleparallel dark energy possesses an additional late-time solution, in which dark energy behaves like a cosmological constant, independently of the specific values of the model parameters. Finally, during the evolution the dark energy equation-of-state parameter can be either above or below -1, offering a good description for its observed dynamical behavior and its stabilization close to the cosmological-constant value.

79 ASTRONOMY AND ASTROPHYSICS↗

Photoelectron spectroscopy of aqueous solutions: Streaming potentials of NaX (X = Cl, Br, and I) solutions and electron binding energies of liquid water and X{sup −}

The streaming potentials of liquid beams of aqueous NaCl, NaBr, and NaI solutions are measured using soft X-ray, He(I), and laser multiphoton ionization photoelectron spectroscopy. Gaseous molecules are ionized in the vicinity of liquid beams and the photoelectron energy shifts are measured as a function of the distance between the ionization point and the liquid beam. The streaming potentials change their polarity with concentration of electrolytes, from which the singular points of concentration eliminating the streaming potentials are determined. The streaming currents measured in air also vanish at these concentrations. The electron binding energies of liquid water and I{sup −}, Br{sup −}, and Cl{sup −} anions are revisited and determined more accurately than in previous studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigations towards incorporation of Eu 3+ and Cm 3+ during ZrO 2 crystallization in aqueous solution

Nuclear energy provides a widely applied carbon-reduced energy source. Following operation, the spent nuclear fuel (SNF), containing a mixture of radiotoxic elements such as transuranics, needs to be safely disposed of. Safe storage of SNF in a deep geological repository (DGR) relies on multiple engineered and natural retention barriers to prevent environmental contamination. In this context, zirconia (ZrO 2 ) formed on the SNF rod cladding, could be employed as an engineered barrier for immobilization of radionuclides via structural incorporation. This study investigates the incorporation of Eu 3+ and Cm 3+ , representatives for trivalent transuranics, into zirconia by co-precipitation and crystallization in aqueous solution at 80 °C. Complementary structural and microstructural characterization has been carried out by powder X-ray diffraction (PXRD), spectrum imaging analysis based on energy-dispersive X-ray spectroscopy in scanning transmission electron microscopy mode (STEM-EDXS), and luminescence spectroscopy. The results reveal the association of the dopants with the zirconia particles and elucidate the presence of distinct bulk and superficially incorporated species. Hydrothermal aging for up to 460 days in alkaline media points to great stability of these incorporated species after initial crystallization, with no indication of phase segregation or release of Eu 3+ and Cm 3+ over time. These results suggest that zirconia would be a suitable technical retention barrier for mobilized trivalent actinides in a DGR.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Techno-Economic Analysis for the Addition of a Thermal Energy Storage System to a Central Plant

Increasing energy demand and rising peak loads present significant challenges for energy management in commercial and institutional settings. As climate change drives greater cooling needs, central plants must navigate the complex tradeoffs between operational efficiency, cost control, and grid stability. Thermal energy storage (TES) systems offer a viable solution by shifting energy consumption from peak to off-peak periods, thereby reducing peak demand, lowering utility expenses, and improving grid resilience. However, the success of TES implementation hinges on appropriate system sizing, effective control strategies, and alignment with local utility rate structures. This article presents a techno-economic analysis of integrating a chilled water TES system into the central plant at California State University, Dominguez Hills. Drawing on historical load profiles and utility tariffs, we assess three TES sizing approaches and their corresponding control strategies from both energy and economic perspectives. This article utilizes a model-based approach to assess the impact of TES sizing and control strategies on the techno-economic feasibility of integrating TES into an existing central plant. The models employed for this analysis were calibrated using 4 years of historical data. Here, the results demonstrated that utility tariffs and the campus's operational profiles dictate the most feasible sizing and control methods. The findings offer valuable insights for institutions and commercial building managers exploring sustainable energy solutions. By demonstrating how optimized TES strategies can improve operational efficiency while achieving financial savings, this study highlights the potential for TES to align performance with cost effectiveness in real-world applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Generation III reactors safety requirements and the design solutions

Nuclear energy's public acceptance, and hence its development, depends on its safety. As a reactor designer, we will first briefly remind the basic safety principles of nuclear reactors' design. We will then show how the industry, and in particular Areva with its EPR, made design evolution in the wake of the Three Miles Island accident in 1979. In particular, for this new generation of reactors, severe accidents are taken into account beyond the standard design basis accidents. Today, Areva's EPR meets all so-called 'generation III' safety requirements and was licensed by several nuclear safety authorities in the world. Many innovative solutions are integrated in the EPR, some of which will be introduced here.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Semiclassical solution for a Yang-Mills field with given energy

A new classical solution for the Yang-Mills theory in which the Euclidean energy plays a role of a parameter is discussed. The instanton and sphaleron are shown to be particular examples of this more general solution. The energy parameter for them takes on special values, which are zero and sphaleron mass for the instanton and sphaleron, respectively. The solution is employed to describe the tunneling process, which is accompanied by a variation of the topological charge. A range of temperatures, where the new solution makes this tunneling more effective than the known mechanisms based on the instanton, caloron, or sphaleron is found.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Making It Happen: On-Site Renewable Energy and Storage Challenges and Solutions for Commercial Buildings: Preprint

The U.S. Department of Energy's (DOE's) Better Climate Challenge invites organizations to partner with DOE to set ambitious, portfolio-wide greenhouse gas (GHG) emissions reduction goals. To better understand the barriers to these goals and to demonstrate successful emissions reduction pathways, organizations can access working groups as one form of technical assistance from leading experts. One working group focus was the use of on-site renewable energy and storage - a key decarbonization strategy after energy efficiency. Members of the Better Climate Challenge onsite renewable energy and storage working group first identified barriers to implementing these technologies. Solutions were then brainstormed to support portfolio building owners to move from single systems to widespread implementation. Example insights include improving understandings of installation processes and location decisions, making the business case to relevant stakeholders, discussing unanticipated challenges throughout the process, and replicating these technologies across portfolios. This paper details valuable market feedback and highlights pathways to move toward widespread deployment of renewable energy and storage solutions.

building decarbonization strategies↗

The Evolving Solar Energy Innovation Ecosystem in Puerto Rico

This report presents initial findings from the research project, “Developing socially and economically generative, resilient PV-energy systems for low- and moderate-income communities: Applications for Puerto Rico.” This material is based upon work supported primarily by the US Department of Energy’s Office of Energy Efficiency and Renewable Energy under the Solar Energy Technology Office Fiscal Year 2018 Funding Program award number DE-EE0008570 and in part by the National Science Foundation (NSF) and the Department of Energy (DOE) under NSF CA No. EEC-1041895. This project is a joint effort of Arizona State University’s Center for Energy and Society; the University of Puerto Rico-Mayaguez’s Center for Hemispheric Cooperation in Research and Education in Engineering and Applied Science, Sustainable Energy Center, and National Institute for Energy and Island Sustainability; and the National Renewable Energy Laboratory. The project seeks to understand the place of energy in low-income communities in Puerto Rico, the opportunities for solar energy to provide solutions to the energy challenges facing these communities, and the capacity of the solar energy innovation ecosystem in Puerto Rico to deliver relevant solar solutions for these communities. We define the solar energy innovation ecosystem as the diverse actors and stakeholders whose collective networks and actions—and the flows among them of ideas, knowledge, data, influence, money, and equipment, as well as the rules that govern those flows—are essential to the success of renewable energy markets and projects. This report presents results from the first year of the project’s research, which has concentrated on several key goals: (1) characterizing the trajectory of solar energy development in Puerto Rico in the three years since Hurricane María; (2) mapping and characterizing the current solar energy innovation ecosystem in Puerto Rico, including the technical potential for solar energy in Puerto Rico, and the business and policy landscape shaping solar developments; and (3) beginning to characterize the broad landscape of community energy initiatives underway in Puerto Rico. To pursue these goals, we engaged in a systematic review of solar energy developments in Puerto Rico and conducted interviews with over 100 members of the solar energy innovation, including policy, business, finance, research, and civil society leaders, as well as solar users. Solar technical potential data for Puerto Rico was developed by the National Renewable Energy Laboratory (NREL) and is publicly available at: https://data.nrel.gov/submissions/144. The documentation for the NREL dataset is included as Appendix A.

14 SOLAR ENERGY↗

Synthetic Heat Transfer Fluids as Thermal Energy Storage Media for Existing NPPs

This paper provides a conceptual presentation on the integration of existing nuclear power plants with technically robust thermal energy storage solution. Although a more detailed analysis with entire condensate and feed water system integrated to the energy storage solution is required for more accurate analysis, for the conceptual presentation a simpler approach based on energy density and exergy analysis is adopted. Therminol and Dowtherm are commercially available robust technological solutions for this purpose and operate in the temperature range compatible with the existing PWRs. The analysis shows that exergy recovery efficiency is close to 95%, i.e. equal to efficiency proposed using molten salts. The energy density values for these HTFs in this operating range are not expected to create practical challenges and geometrical requirements can be met within the existing nuclear power plants. The energy storage costs with these off the shelf materials already being produced in very large quantities via well established processes are much lower than the projected costs of futuristic grid scale battery solutions. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

SOLVING THE LARGE DISCREPANCY BETWEEN INCLUSIVE AND EXCLUSIVE MEASUREMENTS OF THE {sup 8}Li + {sup 4}He -> {sup 11}B + n REACTION CROSS SECTION AT ASTROPHYSICAL ENERGIES

A solution of the large discrepancy existing between inclusive and exclusive measurements of the {sup 8}Li + {sup 4}He -> {sup 11}B + n reaction cross section at E {sub cm} < 3 MeV is evaluated. This problem has profound astrophysical relevance for this reaction is of great interest in big bang and r-process nucleosynthesis. By means of a novel technique, a comprehensive study of all existing {sup 8}Li + {sup 4}He -> {sup 11}B + n cross section data is carried out, setting up a consistent picture in which all the inclusive measurements provide the reliable value of the cross section. New unambiguous signatures of the strong branch pattern non-uniformities, near the threshold of higher {sup 11}B excited levels, are presented and their possible origin, in terms of the cluster structure of the involved excited states of {sup 11}B and {sup 12}Bnuclei, is discussed.

79 ASTRONOMY AND ASTROPHYSICS↗