Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “emission control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Can Water-Injected Turbomachines Provide Cost-Effective Emissions and Maintenance Reductions?

An investigation has been performed to evaluate the effect of water injection on the performance of the Air Force Research Laboratory (AFRL, Wright-Patterson Air Force Base (WPAFB)) experimental trapped vortex combustor (TVC) over a range of fuel-to-air and water-to-fuel ratios. Performance is characterized by combustor exit quantities: temperature and emissions measurements using rakes, and overall pressure drop, from upstream plenum to combustor exit. Combustor visualization is performed using gray-scale and color still photographs and high-frame-rate videos. A parallel investigation evaluated the performance of a computational fluid dynamics (CFD) tool for the prediction of the reacting flow in a liquid fueled combustor (e.g., TVC) that uses water injection for control of pollutant emissions and turbine inlet temperature. Generally, reasonable agreement is found between data and NO(x) computations. Based on a study assessing the feasibility and performance impact of using water injection on a Boeing 747-400 aircraft to reduce NO(x) emissions during takeoff, retrofitting does not appear to be cost effective; however, an operator of a newly designed engine and airframe might be able to save up to 1.0 percent in operating costs. Other challenges of water injection will be discussed.

Hendricks, Robert C.↗
NASA NTRS2018

Chemical Modeling of the Reactivity of Short-Lived Greenhouse Gases: A Model Inter-Comparison Prescribing a Well-Measured, Remote Troposphere

We develop a new protocol for merging in situ measurements with 3-D model simulations of atmospheric chemistry with the goal of integrating over the data to identify the most reactive air parcels in terms of tropospheric production and loss of the greenhouse gases ozone and methane. Presupposing that we can accurately measure atmospheric composition, we examine whether models constrained by such measurements agree on the chemical budgets for ozone and methane. In applying our technique to a synthetic data stream of 14,880 parcels along 180W, we are able to isolate the performance of the photochemical modules operating within their global chemistry-climate and chemistry-transport models, removing the effects of modules controlling tracer transport, emissions, and scavenging. Differences in reactivity across models are driven only by the chemical mechanism and the diurnal cycle of photolysis rates, which are driven in turn by temperature, water vapor, solar zenith angle, clouds, and possibly aerosols and overhead ozone, which are calculated in each model. We evaluate six global models and identify their differences and similarities in simulating the chemistry through a range of innovative diagnostics. All models agree that the more highly reactive parcels dominate the chemistry (e.g., the hottest 10% of parcels control 25-30% of the total reactivities), but do not fully agree on which parcels comprise the top 10%. Distinct differences in specific features occur, including the regions of maximum ozone production and methane loss, as well as in the relationship between photolysis and these reactivities. Unique, possibly aberrant, features are identified for each model, providing a benchmark for photochemical module development. Among the 6 models tested here, 3 are almost indistinguishable based on the inherent variability caused by clouds, and thus we identify 4, effectively distinct, chemical models. Based on this work, we suggest that water vapor differences in model simulations of past and future atmospheres may be a cause of the different evolution of tropospheric O3 and CH4, and lead to different chemistry-climate feedbacks across the models.

greenhouse gases↗
DOE OSTI2020

Dynamic projection of anthropogenic emissions in China: methodology and 2015–2050 emission pathways under a range of socio-economic, climate policy, and pollution control scenarios

Abstract. Future trends in air pollution and greenhouse gas (GHG)emissions for China are of great concern to the community. A set of globalscenarios regarding future socio-economic and climate developments, combiningshared socio-economic pathways (SSPs) with climate forcing outcomes asdescribed by the Representative Concentration Pathways (RCPs), was createdby the Intergovernmental Panel on Climate Change (IPCC). Chinese researchers have also developed various emission scenarios by considering detailed local environmental and climate policies. However, a comprehensive scenario set connecting SSP–RCP scenarios with local policies and representing dynamic emission changes under local policies is still missing. In this work, to fill this gap, we developed a dynamic projection model, the Dynamic Projection model for Emissions in China (DPEC), to explore China'sfuture anthropogenic emission pathways. The DPEC is designed tointegrate the energy system model, emission inventory model, dynamicprojection model, and parameterized scheme of Chinese policies. The modelcontains two main modules, an energy-model-driven activity rate projectionmodule and a sector-based emission projection module. The activity rateprojection module provides the standardized and unified future energyscenarios after reorganizing and refining the outputs from the energy systemmodel. Here we use a new China-focused version of the Global ChangeAssessment Model (GCAM-China) to project future energy demand and supply inChina under different SSP–RCP scenarios at the provincial level. Theemission projection module links a bottom-up emission inventory model, theMulti-resolution Emission Inventory for China (MEIC), to GCAM-China andaccurately tracks the evolution of future combustion and production technologiesand control measures under different environmental policies. We developedtechnology-based turnover models for several key emitting sectors (e.g.coal-fired power plants, key industries, and on-road transportationsectors), which can simulate the dynamic changes in the unit/vehicle fleetturnover process by tracking the lifespan of each unit/vehicle on an annualbasis. With the integrated modelling framework, we connected five SSP scenarios(SSP1–5), five RCP scenarios (RCP8.5, 7.0, 6.0, 4.5, and 2.6), and threepollution control scenarios (business as usual, BAU; enhanced controlpolicy, ECP; and best health effect, BHE) to produce six combined emissionscenarios. With those scenarios, we presented a wide range of China's futureemissions to 2050 under different development and policy pathways. We foundthat, with a combination of strong low-carbon policy and air pollutioncontrol policy (i.e. SSP1-26-BHE scenario), emissions of major airpollutants (i.e. SO 2 , NO x , PM 2.5 , and non-methane volatile organic compounds – NMVOCs) in China willbe reduced by 34%–66% in 2030 and 58%–87% in 2050 compared to 2015. End-of-pipe control measures are more effective for reducing air pollutant emissions before 2030, while low-carbon policy will play a more important rolein continuous emission reduction until 2050. In contrast, China's emissionswill remain at a high level until 2050 under a reference scenario without activeactions (i.e. SSP3-70-BAU). Compared to similar scenarios set from theCMIP6 (Coupled Model Intercomparison Project Phase 6), our estimates ofemission ranges are much lower than the estimates from the harmonized CMIP6 emissions dataset in2020–2030, but their emission ranges become similar in the year 2050.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2000

Neuroelectric Virtual Devices

This paper presents recent results in neuroelectric pattern recognition of electromyographic (EMG) signals used to control virtual computer input devices. The devices are designed to substitute for the functions of both a traditional joystick and keyboard entry method. We demonstrate recognition accuracy through neuroelectric control of a 757 class simulation aircraft landing at San Francisco International Airport using a virtual joystick as shown. This is accomplished by a pilot closing his fist in empty air and performing control movements that are captured by a dry electrode array on the arm which are then analyzed and routed through a flight director permitting full pilot outer loop control of the simulation. We then demonstrate finer grain motor pattern recognition through a virtual keyboard by having a typist tap his traders on a typical desk in a touch typist position. The EMG signals are then translated to keyboard presses and displayed. The paper describes the bioelectric pattern recognition methodology common to both examples. Figure 2 depicts raw EMG data from typing, the numeral '8' and the numeral '9'. These two gestures are very close in appearance and statistical properties yet are distinguishable by our hidden Kharkov model algorithms. Extensions of this work to NASA emissions and robotic control are considered.

Wheeler, Kevin↗
NASA NTRS1968

Thermal control panel Patent

Development and characteristics of thermal sensitive panel for controlling ratio of solar absorptivity to surface emissivity for space vehicle temperature control

Osullivan, W. J., Jr.↗
NASA NTRS2000

Fabrication and Thermo-Optical Properties of the MLS Composite Primary Reflector

The Microwave Limb Sounder (MLS) is a limb-sounding radiometer sensing emissions in the millimeter and sub-millimeter range. MLS will contribute to an understanding of atmospheric chemistry by assessing stratospheric and tropospheric ozone depletion, climate forcings and volcanic effects. The heart of the antenna is the primary reflector, constructed from graphite/cyanate composites in a facesheet/core construction. The reflector has an aperture of one square meter, a mass of 8.7 kilos and final figure accuracy of 4.37 microns rms. The surface is also modified to ensure RF reflectivity, prevent solar concentration and provide thermal balance to the spacecraft The surface is prepared by precision beadblasting, then coated with vapor deposited aluminum (VDA) and finally a layer of silicon suboxide (SiO(x)) to control the infrared emissivity. The resulting surface has a solar absorptance of 0.43 and an absorptance/emittance ratio of 1.3. BRDF analysis shows that 93% of the incident thermal energy is reflected outside a 10 degree angle of cone. For its mass and aperture, we believe this reflector to have the highest figure accuracy yet achieved in a composite antenna construction.

Willis, Paul B.↗
DOE OSTI2019

Single-fuel reactivity controlled compression ignition through catalytic partial oxidation reformation of diesel fuel

A single-fuel RCCI concept has been proposed to avoid the need for a secondary fuel system required for conventional RCCI by generating the secondary fuel from the primary fuel through catalytic partial oxidation (CPOX) reformation. In conventional RCCI, gasoline or natural gas can be used as the low-reactivity fuel, and diesel can be used as the high-reactivity fuel. In this study, two reformate mixtures generated by reforming diesel fuel at different operating conditions were used as the low-reactivity fuel, with the parent diesel as the high reactivity fuel. The combustion characteristics of reformate-diesel RCCI were compared with the conventional RCCI. A CFD model was also developed and validated against the experimental results. The model was then used to validate a necessary approximation of the reformate mixture's species concentrations. Compared to conventional RCCI fuel pairs, reformate-diesel RCCI shows marginally better thermal efficiency, approximately 10% better THC emissions, approximately 50% lower NOx emissions, and good controllability. Because the reformate mixture has a high concentration of diluents it displaces a large fraction of intake air and acts similarly to EGR. The combustion behavior of reformate-diesel RCCI is in between that of gasoline-diesel and natural gas-diesel conventional RCCI. From the results, it can be concluded that reformate-diesel RCCI is not overly sensitive to the reformation process itself and the exact species concentrations in the reformate mixture. Finally, a small change in the start of injection of diesel, blend ratio, and EGR fraction can be used to compensate for reformate mixture concentration differences.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

A Literature Review of NO x Emissions in Current and Future State-of-the-Art Gas Turbines

Current U.S. government policy seeks to achieve a completely carbon-free economy by 2050, with a carbon-free electricity sector by 2035 (per executive orders #14008 and #14057). To address these goals, the U.S. Department of Energy is evaluating strategies and technologies that support the production, utilization, transport, and storage of hydrogen (via initiatives such as Department of Energy's (DOE) Energy Earthshot—Hydrogen and various DOE funding opportunity announcements). A carbon-free fuel such as hydrogen cannot be overvalued in a dynamic electric energy sector seeking to decarbonize. One of the most important technologies needed to achieve the goal of a carbon-free electricity sector is a 100% hydrogen-fueled gas turbine. Accommodating hydrogen-based fuels has been a key goal for various original engine manufacturers (OEMs) for many years, but much more research and development (R&D) is needed. The purpose of this paper is to highlight the current state-of-the- art of hydrogen turbine technology, especially regarding nitrogen oxide (NO X ) emissions compared to natural gas-fueled turbines. NO X is the primary criteria pollutant from thermally driven combustion turbines and should be controlled to levels that are equivalent to or below existing standards (as reported “existing standards” for hydrogen-fueled gas turbines may need to be rebaselined). Further, this paper will provide an overview of hydrogen as a fuel and various NO X emissions control techniques that are relevant for hydrogen-based fuels. A conclusion from this overview is that, with some level of R&D, NO X emissions from hydrogen-fueled gas turbines can be controlled to levels similar to those produced by state-of-the-art (SOTA) natural gas-fueled combustion turbines while remaining competitive in terms of performance and efficiency.

42 ENGINEERING↗
DOE OSTI2021

Controlling Interactions between Quantum Emitters Using Atom Arrays

We investigate the potential for two-dimensional atom arrays to modify the radiation and interaction of individual quantum emitters. Specifically, we demonstrate that control over the emission linewidths, resonant frequency shifts, and local driving field enhancement in impurity atoms is possible due to strong dipole-dipole interactions within ordered, subwavelength atom array configurations. We demonstrate that these effects can be used to dramatically enhance coherent dipole-dipole interactions between distant impurity atoms within an atom array. Possible experimental realizations and potential applications are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Biopolymer Concrete

Cement production for concrete has been responsible for ~7–8% of global greenhouse gas (GHG) emissions, and nearly equally contribution for steel production processes (EPA, 2020). In order to achieve carbon neutrality by 2050, a novel solution has to be investigated. This project aims to develop fundamental mechanistic understanding and experimental characterization to create a 3D printable biopolymer concrete using plant-based polyurethane as an innovative and sustainable alternative for Portland cement concrete, with significantly low carbon footprint. Future construction will utilize the advances in digital additive manufacturing (3D printing) to produce optimal geometries with a minimum waste of materials. Understanding the polymerization process, factors impacting the composite rheology, and the structural behavior of this biopolymer concrete will enable us to engineer the next generation of concrete structures with low carbon footprint. This project aims to improve the nation’s ability to control Greenhouse Gas emission neutrality for the set goal of 2050 via introducing a structurally viable bio-based polymer concrete.

42 ENGINEERING↗
NASA NTRS1983

The low-energy plasma in the Jovian magnetosphere

Burke and Franklin (1955) discovered radio emissions from Jupiter at 22.2 MHz. Subsequent observations established the strong control of the decametric emissions by the satellite Io. The Voyager encounters with Jupiter in 1979 have resulted in a dramatic increase in detailed knowledge of the plasma properties of the Jovian magnetosphere. The Io plasma torus is discussed, taking into account the Voyager plasma science experiment, positive-ion temperatures in the torus, electron distribution functions in the torus, elementary-charge concentrations in the torus, positive-ion composition in the torus, and plasma velocities in the torus. The Io flux tube is considered along with the middle magnetosphere and the outer magnetosphere. Attention is given to the sources of plasma, aspects of diffusive transport, questions of inertial loading, and the existence of nonazimuthal flow velocities in the middle magnetosphere.

Belcher, J. W.↗
DOE OSTI2026

RuKY Catalyst‐Packed Permeation Membrane for Quantitative Ammonia and d3‐Ammonia Dehydrogenation to Ultrapure Hydrogen

Ammonia is a promising carbon-free hydrogen carrier, but incomplete ammonia dehydrogenation (cracking) generates atmospheric emissions of NO x , a potent greenhouse gas. Additionally, incomplete cracking of ammonia leads to regulatory challenges in nuclear and fusion power, where tritiated ammonia (NT 3 ) emissions are strictly controlled. Therefore, we report the use of low-temperature ammonia dehydrogenation catalysts (3%Ru/1%Y/12%K/Al 2 O 3 ) in a palladium alloy H 2 permeation membrane for quantitative conversion of ammonia into hydrogen and nitrogen at industry-relevant conditions. This catalytic membrane reactor system achieved an astonishing effluent concentration of <1 ppm at 450°C under a 100% NH 3 stream, which is far beyond the 99.6% conversion target required for the adoption of ammonia as a vehicle fuel. The low-temperature ammonia dehydrogenation catalyst was tested in a packed bed reactor with NH 3 and ND 3 to both elucidate the reaction mechanism and to quantify the kinetic isotope effect of the membrane reactor. The rate-limiting step at temperatures relevant to the palladium membrane are isotope independent, indicating that the isotopologue content will not modify the desired reaction kinetics. By reducing emissions to below-trace levels with no additional separation, this work provides a path to greatly simplified and miniaturized ammonia cracking processes.

ammonia decomposition↗
NASA NTRS1981

Plasma waves near Saturn - Initial results from Voyager 1

The Voyager 1 plasma wave instrument detected many familiar types of plasma waves during the encounter with Saturn, including ion-acoustic waves and electron plasma oscillations upstream of the bow shock, an intense burst of electrostatic noise at the shock, and chorus, hiss, electrostatic electron cyclotron waves, and upper hybrid resonance emissions in the inner magnetosphere. A clocklike Saturn rotational control of low-frequency radio emissions was observed, and evidence was obtained of possible control by the moon Dione. Strong plasma wave emissions were detected at the Titan encounter indicating the presence of a turbulent sheath extending around Titan, and upper hybrid resonance measurements of the electron density show the existence of a dense plume of plasma being carried downstream of Titan by the interaction with the rapidly rotating magnetosphere of Saturn.

Gurnett, D. A.↗
DOE OSTI2026

In-situ sensor monitoring of multi-class gas porosity formation in laser powder bed fusion using convolutional neural network

In-situ monitoring of defect formation remains a significant challenge in the laser powder bed fusion (LPBF) process. Recent advances have enabled real-time defect detection with machine learning and in-situ sensing technologies; however, most studies focus on binary classification of keyhole pores, limiting nuanced multi-class pore differentiation and formation mechanisms. This work introduces a multi-class pore detection framework (no pore, small pores < 15 µm, and large pores > 15 µm) by leveraging photodiode sensor data alongside high-fidelity synchrotron X-ray imaging. The 15 µm threshold is selected to distinguish between two fundamentally different defect mechanisms, following the physical size-mechanism boundary established by prior high-resolution synchrotron X-ray characterization of Al6061 LPBF. Distinguishing these classes is critical because large keyhole pores are structurally detrimental, whereas small gas pores are often benign, requiring different process control strategies. Thermal emission monitoring data collected simultaneously with high-speed X-ray imaging at the Stanford Synchrotron Radiation Lightsource (SSRL), are correlated with subsurface melt pool dynamics to establish ground truth. Continuous Wavelet Transform (CWT) with optimized parameters converts the photodiode time-series signals into time–frequency images, facilitating feature extraction. Convolutional Neural Networks (CNN) are then applied for real-time multi-class pore classification in an average inference time of 1 ms per signal window. It achieves 79% accuracy and an Area Under the Receiver Operating Characteristic curve (AUC ROC) score of 0.89 with five-fold cross-validation. The results demonstrate that coupling CWT-based feature engineering with CNN architecture enables reliable multi-class pore detection in Al6061 builds using affordable in-situ sensors. This approach advances scalable and affordable quality assurance in additive manufacturing by moving beyond binary defect detection toward more nuanced classification of porosity mechanisms with in-situ sensors and machine learning.

Laser powder bed fusion, Multi-class pores, In-sit↗
DOE OSTI2022

Additive manufacturing of ceramic materials for energy applications: Road map and opportunities

Among engineering materials, ceramics are indispensable in energy applications such as batteries, capacitors, solar cells, smart glass, fuel cells and electrolyzers, nuclear power plants, thermoelectrics, thermoionics, carbon capture and storage, control of harmful emission from combustion engines, piezoelectrics, turbines and heat exchangers, among others. Advances in additive manufacturing (AM) offer new opportunities to fabricate these devices in geometries unachievable previously and may provide higher efficiencies and performance, all at lower costs. This article reviews the state of the art in ceramic materials for various energy applications. The focus of the review is on material selections, processing, and opportunities for AM technologies in energy related ceramic materials manufacturing. The aim of the article is to provide a roadmap for stakeholders such as industry, academia and funding agencies on research and development in additive manufacturing of ceramic materials toward more efficient, cost-effective, and reliable energy systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Noble-Metal-Free, Nickel-Based Dual Functional Materials for Improved Methane Production from In Situ Carbon Dioxide Capture and Conversion

Promoters for dual functional materials have not been well explored, but promoters could improve the efficiency of the process by improving the selectivity of the CO 2 methanation process. Utilizing integrated capture and conversion, where CO 2 is captured and converted to useful products, would allow for a useful avenue to control CO 2 emissions. One such way to accomplish this would be to utilize materials that can both capture and convert CO 2 to useful products. However, these materials are often based on costly noble metals, like ruthenium and platinum, decreasing their viability on an industrial scale. Less expensive metals, for example, nickel, would allow for dual functional materials to be more readily utilized in industrial settings. Nickel-based dual functional materials often do not react with the captured CO 2 and merely desorb the CO 2 rather than form a useful product. However, promoters have not been well explored for these types of materials to improve the catalytic properties, which would be beneficial to improve nickel-based materials. Herein, we report the addition of ytterbium on a nickel-based dual functional material and the improvements to the production of methane from captured CO 2 with the incorporated ytterbium promoter. The ytterbium promoter improves the selectivity of the catalysts for the hydrogenation of captured CO 2 to methane and increases the ability for the material to capture CO 2 due to additional basic sites being formed on the surface of alumina. As a result, the 12%Ni/4%Yb/6%Na 2 O/Al 2 O 3 catalyst was utilized to capture carbon dioxide and then convert the captured CO 2 to methane over five cycles, where both the amount captured and the amount converted remained stable, indicating the stability of the material over long-term use.

Catalysts↗
DOE OSTI2020

Resolving Enhanced Mn 2+ Luminescence near the Surface of CsPbCl 3 with Time-Resolved Cathodoluminescence Imaging

Mn 2+ doping of lead halide perovskites has garnered recent interest because it produces stable orange luminescence in tandem with perovskite emission. In this work, we observe enhanced Mn 2+ luminescence at the edges of Mn 2+ -doped CsPbCl 3 perovskite microplates and suggest an explanation for its origin using the high spatiotemporal resolution of time-resolved cathodoluminescence (TRCL) imaging. We reveal two luminescent decay components that we attribute to two different Mn 2+ populations. While each component appears to be present both near the surface and in the bulk, the origin of the intensity variation stems from a higher proportion of the longer lifetime component near the perovskite surface. Overall, we suggest that this higher emission is caused by an increased probability of electron-hole recombination on Mn 2+ near the perovskite surface due to an increased trap concentration there. This observation suggests that such surface features have yet untapped potential to enhance emissive properties via control of surface-to-volume ratio.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗